Abstract:Liquid-infused surfaces have recently gained prominence in engineering applications owing to their versatile characteristics such as self-cleaning, anti-fogging, drag reduction, and enhanced heat transfer. In this article, a numerical analysis of pressure-driven flow past a periodic array of rectangular transverse grooves infused with non-Newtonian immiscible lubricants is performed. The volume of fluid method is employed to capture the interface between primary and secondary fluids, and the power-law model is deployed to mimic the non-Newtonian lubricant. The drag reduction capability of the microchannel is examined for various parameters such as Reynolds number, liquid fraction, viscosity ratio, viscosity index, and contact angle. It is observed that the introduction of a non-Newtonian fluid (shear-thickening or shear-thinning) drastically modifies the interface velocity and hydrodynamic resistance. In particular, a shear-thinning lubricant enhances the slip length as the viscosity index (n) is reduced owing to the reduced viscosity at the interface. Note that, for a lubricant having n = 0.7, the percentage improvement in the slip length is 382% in comparison with a Newtonian counterpart having the same viscosity ratio, N = 0.1. Importantly, the introduction of a shear-thinning lubricant with a viscosity ratio N = 5, a liquid fraction of 0.8, and a behavior index n = 0.7 yielded a pressure drag reduction of 63.6% with respect to a classical no-slip channel and of 23% with reference to a microchannel with the Newtonian lubricant. Moreover, at high Reynolds numbers, Re→50, the drag mitigation is slightly lowered due to the primary vortex shift in the cavity. Furthermore, the effect of the interface contact angle (θc) is investigated, as θc drops from 90° (flat) to 45° (convex); the meniscus curvature is enhanced, and the effective slip length is reduced. These observations suggest that a shear-thinning lubricant-infused microchannel is a promising candidate for drag reduction in lab-on-chip applications.

Investigations of skin friction drag mitigation over viscoelastic surfaces in supersonic flows

On Interfacial Deformation and Resistance Characteristics over Superhydrophobic Surfaces: A Numerical Study

Sustainable Drag Reduction in Turbulent Taylor-Couette Flows by Depositing Sprayable Superhydrophobic Surfaces

Comparison Between Microbubble Drag Reduction and Viscoelastic Drag Reduction

Boundary layer analysis of ventilated partial cavity for friction drag reduction

Riblet Surface Drag Reduction on Subsonic Aircraft

Role of skin friction drag during flow-induced reconfiguration of a flexible thin plate

Simultaneous Measurements of Surface Spanwise Waves and Velocity in a Turbulent Boundary Layer

Drag reduction in hypersonic flows with viscous compressible fluid–solid coupling: The role of elastic spikes and lateral jets

Turbulent drag reduction of viscoelastic wormlike micellar gels

3D Numerical Simulation and Structural Optimization for a MEMS Skin Friction Sensor in Hypersonic Flow

Sustainable drag reduction in Taylor-Couette flow using riblet superhydrophobic surfaces

Evolution of Air Plastron Thickness and Slip Length over Superhydrophobic Surfaces in Taylor Couette Flows

Superhydrophobic surfaces to reduce form drag in turbulent separated flows

Mechanism of Flow Drag Reduction on Non-Smooth Surface

Hydrodynamic drag reduction in ribbed microchannel with infused non-Newtonian lubricants

Numerical Study on Drag Reduction of Superhydrophobic Surfaces with Conical Microstructures in Laminar Flow

Slip theory-based numerical investigation of the fluid transport behavior on a surface with a biomimetic microstructure

Drag reduction in turbulent flows over superhydrophobic surfaces

Influence of incompressible surfactant on drag in flow along an array of gas-filled grooves

The influence of incompressible surfactant on drag in flow along an array of gas-filled grooves