Abstract:The use of high-fidelity modeling is a promising technique for studying the mechanisms of dust dispersion and deposition in safe decommissioning operations. Detailed multiphysics models for poly-dispersed turbulent flow, particle-laden flow, and particle surface interaction were coupled with a Reynolds Averaged Navier Stokes method for numerical simulation of dust dispersion and deposition. A model that considered the critical viscosity was utilized to estimate the interaction between particles and substrate. The deposition behavior of particles was a result of the competition between adhesion and rebound probabilities during the impact process, and only when the critical viscosity exceeded that of the impacting particles could they attach to the surfaces. To validate the accuracy of the simulation results, deposition experiments using zirconia particles were conducted. The experimental setup included a 3.2 m polycarbonate pipe, a fan regulated by an inverter to control the flow, an ultra-low penetration air filter capable of capturing particles with a minimum diameter of 120 nanometers. An air pump connected to a particle tank and a mixing tank was used for homogenizing the injection of particles. Particle concentration was measured during the experiments using a light scattering spectrometer system, WELAS R 2000, from the manufacturer Palas R . This optical measurement technique functioned with a white light source and scattered light detection. The scattered light was collected via optical fibers, which led to the control and evaluation point, and results were displayed through special software. The numerical simulation results were compared with the experimental data and used to validate the numerical approach for flow with zirconia particles deposited on various material surfaces, including iron, titanium, stainless steel 304, and stainless steel 316, for airflow rates ranging from 54 L/min to 124 L/min.

Importance of Preferential Segregation by Aerodynamics in Dust Rig Tests

Modeling and numerical simulation of gas-solid jet in the transitional-rarefied regime

Understanding of Turbulence Modulation and Particle Response in a Particle-Laden Jet from Direct Numerical Simulations

Numerical Study of Solid Particle Erosion in a Cavity with Different Wall Heights

Deagglomeration of Airborne Nanoparticles in a Decelerating Supersonic Round Jet

Numerical Simulation of Turbulence Modulation by Cylindrical Particles in Round Jet

Computational Fluid Dynamics Analysis of the Venturi Dustiness Tester

Particle Bounce Stick Behaviour in the Rotating Frame of Reference

Distribution of non-spherical nanoparticles in turbulent flow of ventilation chamber considering fluctuating particle number density

Simulation of surface deposits of micron sand particles in the internal cooling duct with a Gaussian probability density model

Experimental and numerical investigation of inertial particles in underexpanded jets

Analysis of Solid Particle Ingestion and Dynamics in a Turbomachine Using Large-Eddy Simulation

Erosion Characterization Of Gas-Solid Jets Impinging Onto Inclined Surfaces

Numerical and experimental approach for dust dispersion and deposition behavior for safe decommissioning activities

Particle removal from solid surfaces via an impinging gas jet pulse: Comparison between experimental and CFD-DEM modeling results

Investigation of particle deposition efficiency enhancement in turbulent duct air flow by surface ribs with hybrid-size ribs

Study of the Behavior of Dust Particles in Helium Turbines Considering the Effects of Particle Deposition and Resuspension

Studies of Transonic Aircraft Flows and Prediction of Initial Buffet Onset Using Large-Eddy Simulations

Sand Discharge Simulation and Flow Path Optimization of a Particle Separator

Direct Numerical Simulation of a Particle-Laden Low Reynolds Number Turbulent Round Jet

Numerical study on the effect of nozzle-plate distance on the aerosols collection efficiency and deposition on the impaction plate of a multi-nozzle inertial impactor