Taming the Phase Transition Ability of Poly(vinylidene fluoride) from α to γ′ Phase

Mengyu Wang,Shaojuan Wang,Jian Hu,Huihui Li,Zhongjie Ren,Xiaoli Sun,Haijun Wang,Shouke Yan
DOI: https://doi.org/10.1021/acs.macromol.0c01106
IF: 5.5
2020-07-06
Macromolecules
Abstract:The transition of poly(vinylidene fluoride) (PVDF) α crystals to γ′ phase is, in general, unpredictable. In the present work, the related α–γ′ phase transition has been regulated through adjusting the thermal treatment protocol of the sample. The enhanced α–γ′ phase transition ability has been achieved through stepwise melt crystallization of PVDF. It consists of three steps, including (i) isothermal crystallization at <i>T</i><sub>c1</sub> for <i>t</i><sub>c1</sub>, (ii) quick cooling from <i>T</i><sub>c1</sub> to room temperature at 25 °C, and (iii) isothermal annealing at a relative higher temperature of <i>T</i><sub>c2</sub> for <i>t</i><sub>c2</sub>. The obtained results demonstrate that the insufficient melting at <i>T</i><sub>c2</sub> of the α-PVDF microcrystallites created during cooling from <i>T</i><sub>c1</sub> to 25 °C promotes the γ-PVDF crystallization during <i>t</i><sub>c2</sub> with a curled lamellar structure. These γ-PVDF crystals accelerate the transition of α-PVDF spherulites formed at <i>T</i><sub>c1</sub> into its γ′ counterpart simultaneously during annealing at <i>T</i><sub>c2</sub>. The α–γ′ conversion efficiency is confirmed to be dependent on the cooling rate from <i>T</i><sub>c1</sub> to 25 °C as well as the annealing temperature of <i>T</i><sub>c2</sub>. A synergistic adjustment of the cooling rate from <i>T</i><sub>c1</sub> to 25 °C and the <i>T</i><sub>c2</sub> can result in a full transformation of the α-PVDF spherulites formed at <i>T</i><sub>c1</sub> into γ′-PVDF spherulites. The findings provide important hints for guiding the fabrication of PVDF thin films with high content of the electroactive polar γ phase.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.macromol.0c01106?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.macromol.0c01106</a>.Output voltages for PVDF samples with predominate α-phase and 80% γ/γ′-phase prepared and simple experimental schematic illustration of measuring piezoelectric sensors under the periodical mechanical force (<a class="ext-link" href="/doi/suppl/10.1021/acs.macromol.0c01106/suppl_file/ma0c01106_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
polymer science
What problem does this paper attempt to address?
The α - microcrystallites at Tc2 promote the formation of γ - PVDF crystals. These γ - PVDF crystals, in turn, accelerate the α - γ′ transition of the α - PVDF spherulites formed at Tc1. The study provides a method to regulate the α - γ′ phase transition of PVDF through a controlled heat - treatment protocol, enhancing the formation of the γ′ - phase and potentially improving the electroactive properties of PVDF materials. ### The problem the paper attempts to solve The problem that the paper attempts to solve is how to control the ability of polyvinylidene fluoride (PVDF) to transform from the α - phase to the γ′ - phase by adjusting the heat - treatment protocol. Specifically, the paper explores how to enhance the ability of the α - γ′ phase transition through the method of step - by - step melt crystallization, that is, isothermal crystallization at a specific temperature, rapid cooling to room temperature, and then isothermal annealing at a higher temperature. This method aims to increase the content of the γ′ - phase, thereby improving the electroactive properties of PVDF materials, especially the piezoelectric properties. Through this research, the authors hope to provide an effective method that can achieve a high content of the polar γ - phase in PVDF films in industrial production, which is of great significance for the development of high - performance flexible electronic devices.