Abstract:Skin wetness perception (WP) greatly affects thermal and sensorial discomfort in clothing and as such is of great interest to the clothing industry. Following neurophysiological studies of WP, this study looks at textile parameters affecting WP. Twenty-four fabrics varying in thickness, fiber type and absorption capacity were studied. Using 12 participants (males/females), the WP induced was studied in four wetness states: 1. Dry; 2. absolute (ABS), all having the same absolute water content of 2400 μL per sample (=0.24 μL mm −2 ); 3. 100REL, saturated with water to their individual absorption capacity; 4. 50REL, to 50% of the value in 3. As total absorption capacity was highly correlated ( r = 0.99) to fabric thickness, conditions 3 and 4 were equivalent to having the same water content per volume of textile, i.e. 0.8 and 0.4 μL mm −3 , respectively. Samples were applied to the upper back statically to minimize the contribution of surface roughness/friction. WP was highly correlated to drop in skin temperature induced by the wet fabric, and increased with application pressure of the fabric. No effect of fiber type was observed. In REL, with equal μL mm −3 , WP showed a positive correlation to total fabric water-content-per-area (μL mm −2 ), and thus also to thickness, given the correlation between the latter two, with saturation above 1.5 μL mm −2 . In ABS, on the other hand, with equal μL mm −2 , and thus with relative water content (μL mm μL mm −3 ) inversely proportional to thickness, WP was also inversely proportional to thickness. Thus WP showed opposing responses depending on the wetting type, indicating that the methodology of manipulating water content should be selected in relation to the product end-use.

Performance Characteristics of Waterproof Breathable Fabrics

The Design of Waterproof, Water Vapour-Permeable Fabrics

A Review on Designing the Waterproof Breathable Fabrics Part I: Fundamental Principles and Designing Aspects of Breathable Fabrics

Research progress of numerical simulation on heat and moisture transfer in porous textiles

Correlation of Air Permeability to Other Breathability Parameters of Textiles

Numerical analysis of heat and moisture transfer in waterproof and breathable composite fabric used for steam protective clothing

Review of Waterproof Breathable Membranes: Preparation, Performance and Applications in the Textile Field

A Study on Water Vapor Transport for Multi-layer Fabrics under Subzero Climate

Waterproof and breathable properties of nanoweb applied clothing

Hydrophobic Fibrous Membranes with Tunable Porous Structure for Equilibrium of Breathable and Waterproof Performance

Moisture Vapor Permeability and Thermal Wear Comfort of Ecofriendly Fiber-Embedded Woven Fabrics for High-Performance Clothing

Impact of Fabric Moisture Transport Properties on Physiological Responses when Wearing Protective Clothing

Differences in wearer response to garments for outdoor activity

Development of a multilayered waterproof breathable fabric for full weather apparel

Influence of fabric structure and finishing pattern on the thermal and moisture management properties of unidirectional water transport knitted polyester fabrics

Thermal and water vapor transmission through porous warp knitted 3D spacer fabrics for car upholstery applications

Human wetness perception in relation to textile water absorption parameters under static skin contact

Characterization of Liquid Moisture Transport Performance of Wool Knitted Fabrics

Application of New Waterproof Quick-drying Sports Green Material in Clothing Design

Effect of Moisture Management on Functional Performance of Cold Protective Clothing