Abstract:Bridges constitute important elements of the transportation network. A vast part of the Italian existing infrastructural system dates to around 60 years ago, which implies that the related bridge structures were constructed according to past design guidelines and underwent a probable state of material deterioration (e.g., steel corrosion, concrete degradation), especially in those cases in which proper maintenance plans have not been periodically performed over the structural lifetime. Consequently, elaborating rapid yet effective safety assessment strategies for existing bridge structures represents a topical research line. This contribution presents a systematic experimental-numerical approach for assessing the load-bearing capacity of existing prestressed concrete (PC) bridge decks. This methodology is applied to the Longano PC viaduct (southern Italy) as a case study. Initially, natural frequencies and mode shapes of the bridge deck are experimentally identified from vibration data collected in situ through Operational Modal Analysis (OMA), based on which a numerical finite element (FE) model is developed and calibrated. In situ static load tests are then carried out to investigate the static deflections under maximum allowed serviceability loads, which are compared to values provided by the FE model for further validation. Since prestressing strands appear corroded in some portions of the main girders, numerical static nonlinear analysis with a concentrated plasticity approach is finally conducted to quantify the effects of various corrosion scenarios on the resulting load-bearing capacity of the bridge at ultimate limit states. The proposed methodology, encompassing both serviceability and ultimate conditions, can be used to identify critical parts of a large infrastructure network prior to performing widespread and expensive material test campaigns, to gain preliminary insight on the structural health of existing bridges and to plan a priority list of possible repairing actions in a reasonable, safe, and costly effective manner.

Structural health status assessment of a cable-stayed bridge by means of experimental vibration analysis

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Assessment of the structural condition of a cable-stayed footbridge based on dynamic tests

Study on Typical Dynamic Characteristics of a Long-span Prestressed Concrete Cable-stayed Bridge

Vibration-Based Damage Detection Of Cable-Stayed Bridges

Estimation of Main Cable Tension Force of Suspension Bridges Based on Ambient Vibration Frequency Measurements

Dynamic Assessment of Curved Cable-Stayed Bridge by Model Updating

Dynamic Tests on Large Cable-Stayed Bridge

A Combined Experimental-Numerical Framework for Assessing the Load-Bearing Capacity of Existing PC Bridge Decks Accounting for Corrosion of Prestressing Strands

Drive-by-bridge inspection for damage identification in a cable-stayed bridge: Numerical investigations

Dynamic Brillouin Scattering–Based Condition Assessment of Cables in Cable-Stayed Bridges

Structural Health Monitoring of a Cable-Stayed Bridge Using Regularly Conducted Diagnostic Load Tests

Seismic reliability of a cable-stayed bridge retrofitted with hysteretic devices

Health Monitoring Of A Smart Base Isolated Benchmark Cable-Stayed Bridge Using Symptom Approach

Finite element numerical simulation of a cable‐stayed bridge construction through the progressive cantilever method

Structural performance degradation of cable-stayed bridges subjected to cable damage: model test and theoretical prediction

A Good Practice for the Proof Testing of Cable-Stayed Bridges

Application of a hybrid structural health monitoring approach for condition assessment of cable-stayed bridges