Abstract:This study focuses on the development of a piezoelectric device capable of generating feedback vibrations to the user who manipulates it. The objective here is to explore the possibility of developing a haptic system that can replace physical buttons on the tactile screen of in-car systems. The interaction between the user and the developed device allows completing the feedback loop, where the user's action generates an input signal that is translated and outputted by the device, and then detected and interpreted by the user's haptic sensors and brain. An FEM (finite element model) via ANSYS multiphysics software was implemented to optimize the haptic performance of the wafer structure consisting of a BaTiO3 multilayered piezocomposite coated on a PET transparent flexible substrate. Several parameters relating to the geometric and mechanical properties of the wafer, together with those of the electrodes, are demonstrated to have significant impact on the actuation ability of the haptic device. To achieve the desired vibration effect on the human skin, the haptic system must be able to drive displacement beyond the detection threshold (~2 µm) at a frequency range of 100-700 Hz. The most optimized actuation ability is obtained when the ratio of the dimension (radius and thickness) between the piezoelectric coating and the substrate layer is equal to ~0.6. Regarding the simulation results, it is revealed that the presence of the conductive electrodes provokes a decrease in the displacement by approximately 25-30%, as the wafer structure becomes stiffer. To ensure the minimum displacement generated by the haptic device above 2 µm, the piezoelectric coating is screen-printed by two stacked layers, electrically connected in parallel. This architecture is expected to boost the displacement amplitude under the same electric field (denoted E) subjected to the single-layered coating. Accordingly, multilayered design seems to be a good alternative to enhance the haptic performance while keeping moderate values of E so as to prevent any undesired electrical breakdown of the coating. Practical characterizations confirmed that E=20 V/μm is sufficient to generate feedback vibrations (under a maximum input load of 5 N) perceived by the fingertip. This result confirms the reliability of the proposed haptic device, despite discrepancies between the predicted theory and the real measurements. Lastly, a demonstrator comprising piezoelectric buttons together with electronic command and conditioning circuits are successfully developed, offering an efficient way to create multiple sensations for the user. On the basis of empirical data acquired from several trials conducted on 20 subjects, statistical analyses together with relevant numerical indicators were implemented to better assess the performance of the developed haptic device.

Integrate Electroadhesion Tactile Feedback With Projected Capacitive Touchscreen Using Semiconductor Coating

A Mixed-Coordination Electron Trapping-Enabled High-Precision Touch-Sensitive Screen for Wearable Devices

Contact mechanics between the human finger and a touchscreen under electroadhesion

A Modified Analytical Model to Study the Sensing Performance of a Flexible Capacitive Tactile Sensor Array

Electrostatic Tactile Display without Insulating Layer

An Analytical Model for Studying the Structural Effects and Optimization of A Capacitive Tactile Sensor Array

Modeling and Analysis of A Flexible Capacitive Tactile Sensor Array for Normal Force Measurement

P‐16.3: A Tactile Sensor Interface Formed by Two TFTs and One Capacitor to Enable Dynamic and Static Force Sensing

A Flexible Capacitive Tactile Sensor Array for Prosthetic Hand Real-Time Contact Force Measurement.

Tactile Perception of Electroadhesion: Effect of DC versus AC Stimulation and Finger Moisture

Nanotexture Electrode On Nanoporous Aao Dielectric For Micro Tactile Sensing Devices

Highly stable capacitive tactile sensors with tunable sensitivity facilitated by electrostatic interaction of layered double hydroxide, MXene, and Ag NWs

Flexible human-machine interface touch system based on double-network solid-state ionic conductive elastomers

Interference haptic stimulation and consistent quantitative tactility in transparent electrotactile screen with pressure-sensitive transistors

A self-powered, high-precision and minimum-channel touch panel coupling triboelectrification and uniform resistance film

A Fully Flexible Intelligent Thermal Touch Panel Based on Intrinsically Plastic Ag2S Semiconductor

Haptic Feedback Device Using 3D-Printed Flexible, Multilayered Piezoelectric Coating for In-Car Touchscreen Interface

Design of AM Self-Capacitive Transparent Touch Panel Based on A-Igzo Thin-Film Transistors

A Fully Flexible Intelligent Thermal Touch Panel Based on Intrinsically Plastic Ag 2 S Semiconductor

Transfer of Tactile Sensors Using Stiction Effect Temporary Handling

Vertically Integrated Multiple Electrode Design For Sensitivity Enhancement Of Cmos-Mems Capacitive Tactile Sensor