Abstract:The world is hungry for energy with an estimated need of 20 TW-year at present. The demand of electrical power (approximately 1/4) could be supplied by the construction of a few 1,000 nuclear fusion power plants each providing 1 GW of clean electrical energy. After achieving the main challenge of producing and confining a deuterium-tritium plasma, the economic, safety, and environmental impact factors will have to be considered for the development of advanced reactor structural materials. These materials will have to withstand demanding heat and radiation flux environments during an estimated 30-40 years of device lifetime with doses of 200 dpa and temperatures of 1,000 oC. Current fusion structural candidate materials such as bcc ferritic/martensitic, fcc austenitic stainless steels, or ODS steels have serious limitations after exposure to radiation and heat fields in terms of their induced brittleness at room temperatures, or fracture by creep at high temperatures. HEA (high entropy alloys) are a new type of complex metallic material that are fabricated on the basis that the alloy contains multiple principal elements. HEAs have come to attention after their intrinsic radiation resistance, and excellent mechanical properties both at low and intermediate temperatures. The chemical complexity is at present the source of many hypotheses about their properties, in particular their phase stability at temperature and irradiation resistance. In this thesis, a novel formulation of short-range order based on electronic structure methods is developed for predicting phase stability in bcc HEAs. This was used to predict the formation of a bcc phase, associated with a Cr-Cr-Cr-Cr tetrahedron cluster, in an fcc lattice. In experimental work, in contrast to previous studies, but in agreement with the modelling results, a bcc phase enriched in Cr was observed in the fcc HEA CrMnFeNi following a recrystallisation heat treatment. This phase was also present after irradiating with Ni ions up to 20 dpa at temperatures of 300 and 450 oC, although no significant increase in volume fraction was measured, indicating that matrix stability was maintained. The mechanical properties after the ion irradiation were investigated by nanoindentation. There was a significant increase in hardness with irradiation dose. The associated changes in microstructure were examined by transmission electron microscopy.

Phase Stability, Structural Properties, Electronegativity, Mechanical Properties, and Neutron and Gamma-Ray Attenuation Properties of Cantor High Entropy Alloys for Advanced Nuclear Applications

Exploring thermodynamic, physical and radiative interaction properties of quinary FeNiCoCr High Entropy Alloys (HEAs): A multi-directional characterization study

CoCrFeNiSi high entropy alloy: Synthesis, structural and radiation shielding properties

Tailoring ZrWNb-Based Refractory High Entropy Alloys: A Multidirectional Characterization Through Elemental, Physical, Thermodynamic, and Nuclear Radiation Attenuation Properties

Gamma Radiation Shielding Efficiency of High Entropy Alloys: A Comparative Study

Ultra-strong Nanostructured CrMnFeCoNi High Entropy Alloys

Design of Single-Phase High-Entropy Alloys Composed of Low Thermal Neutron Absorption Cross-Section Elements for Nuclear Power Plant Application

Radiation behaviour of high-entropy alloys for fusion reactor environments

Alloy Design and Properties Optimization of High-Entropy Alloys

Structural Changes in High-Entropy Alloys CoCrFeNi and CoCrFeMnNi, Irradiated by He Ions at a Temperature of 700 °C

Temperature-dependent enthalpy and entropy stabilization of solid solution phases in non-equiatomic CoCrFeNiTi high entropy alloys: computational phase diagrams and thermodynamics

Exploring the Compositional Space of High-Entropy Alloys for Cost-Effective High-Temperature Applications

Microstructure, Mechanical Properties and Corrosion Resistance of the Mo0.5V0.5NbTiZrx High-Entropy Alloys with Low Thermal Neutron Sections

Design and experimental investigation of the high-entropy alloys AlCrFeNiCu and AlCrFeNbMo

Ductile CoCrFeNiMox High Entropy Alloys Strengthened by Hard Intermetallic Phases

High He-ion Irradiation Resistance of CrMnFeCoNi High-Entropy Alloy Revealed by Comparison Study with Ni and 304SS

Low neutron cross-section FeCrVTiNi based high-entropy alloys: design, additive manufacturing and characterization

Design and development of low density, high strength ZrNbAlVTi high entropy alloy for high temperature applications

Theoretical Combined Experimental Study of Unique He Behaviors in High-Entropy Alloys

Design and Development of High-Entropy Alloys with a Tailored Composition and Phase Structure Based on Thermodynamic Parameters and Film Thickness Using a Novel Combinatorial Target

Effect of Oxidation on Radiation Shielding Capacity of ZrNbTaMoW Refractory High Entropy Alloys (RHEA) for Nuclear Reactor Applications: Experimental and Theoretical Assessment