Enhancing connectivity/mobility in WBAN applications through detachable wearable multi-band MIMO antenna
Tale Saeidi,Sahar Saleh,Nick Timmons,Saeid Karamzadeh,Ahmed Jamal Abdullah Al-Gburi,Faroq Razzaz
DOI: https://doi.org/10.1088/1402-4896/ad5887
2024-06-16
Physica Scripta
Abstract:A miniaturized multi-band four-port wearable MIMO antenna is proposed, which contains two single spiral buttons on a PTFE substrate (εr=2.1, tanδ=0.001) and a leaky wave textile antenna on denim (εr=1.6, tanδ=0.006). The leaky wave and button antennas have dimensions of 40 × 30 × 1 mm3 and a diameter of only 13 mm, respectively. Nested hexagonal split rings behind the buttons, U-shaped slots on textiles, a comb-shaped neutralization network, and an aperture-coupled slots ground layer are utilized. The unique structure of the buttons and the leaky wave antenna, along with the periodic nested elliptical and circular split ring resonators (CSRRs) slot on the ground, are to obtain multiple bands, higher isolation, broadside radiation, and low SAR. The operational bands are 0.86-2.75 GHz, 2.9-4.85 GHz, 5.75-6.15 GHz, and 8-9.85 GHz, covering the L, C, S, and X bands. Additionally, diversity performance is evaluated by defining the envelope correlation coefficient (ECC), diversity gain (DG), Channel Capacity Loss (CCL), and mean effective gain (MEG). The simulation and measurement findings are in good agreement. The proposed antenna offers a maximum gain of 8.25 dBi, low SAR (<0.05), an LCC below 0.05, DG above 9.85 dBi, CCL< 0.25 bits/s/Hz, MEG <-3 dB, Circular polarization (CP), and strong isolation (<-22 dB) between every two ports. These features make the proposed antenna an ideal option for MIMO communications and suitable for wireless local area network (WLAN) and fifth-generation (5G) communications.
physics, multidisciplinary