Abstract:As a competitive anode material for sodium-ion batteries (SIBs), a commercially available red phosphorus, featured with a high theoretical capacity (2596 mA h g(-1)) and a suitable operating voltage plateau (0.1-0.6 V), has been confronted with a severe structural instability and a rapid capacity degradation upon large volumetric change. In particular, the fundamental determining factors for phosphorus anode materials are yet poorly understood, and their interfacial stability against ambient air has not been explored and clarified. Herein, a high-performance phosphorus/carbon anode material has been fabricated simply through ball-milling the carbon black and red phosphorus, delivering a high reversible capacity of 1070 mA h g(-1) at 400 mA g(-1) after 200 cycles and a superior rate capability of 479 mA h g(-1) at 3200 mA g(-1). More importantly, we first reveal the significance of inhibiting the exposure of phosphorus/carbon electrode materials to air, even for a short period, for achieving a good electrochemical performance, which would sharply decrease the reversible capacities. With the assistance of synchrotron-based X-ray techniques, the formation and accumulation of insulating phosphate compounds can be spectroscopically identified, leading to the decay of electrochemical performance. At the same time, these passivation layers on the surface of electrode were found to occur via a self-oxidation process in ambient air. To maintain the electrochemical advantages of phosphorus anodes, it is necessary to inhibit their contact with air through a rational coating or an optimal storage condition. Additionally, the employment of a fluoroethylene carbonate (FEC) additive facilitates the decomposition of the electrolyte and favors the formation of a robust solid electrolyte interphase layer, which may suppress the side reactions between the active Na-P compounds and the electrolyte. These findings could help improve the surface protection and interfacial stability of phosphorus anodes for high-performance SIBs.

Progress of metal phosphides as the anode materials for sodium ion batteries

Advances in Metal Phosphides for Sodium‐ion Batteries

Strategies to improve the performance of phosphide anodes in sodium-ion batteries

Recent Progress in Phosphorus Based Anode Materials for Lithium/sodium Ion Batteries

Design of Phosphide Anodes Harvesting Superior Sodium Storage: Progress, Challenges, and Perspectives

Research Progress of Cobalt Based Phosphide Anode Materials for Sodium-Ion Batteries

Unveiling the Interfacial Instability of the Phosphorus/Carbon Anode for Sodium-Ion Batteries

Enhanced Silicon Diphosphide-Carbon Composite Anode for Long-Cycle, High-Efficient Sodium Ion Batteries

Recent advances in metal selenides as advanced anode materials for potassium-ion batteries

Recent Development of Phosphate Based Polyanion Cathode Materials for Sodium‐Ion Batteries

Towards High-Performance Phosphate-Based Polyanion-Type Materials for Sodium-Ion Batteries

Progress and Prospects of Transition Metal Sulfides for Sodium Storage

Phosphate Framework Electrode Materials for Sodium Ion Batteries

Iron‐Phosphate‐Based Cathode Materials for Cost‐Effective Sodium‐Ion Batteries: Development, Challenges, and Prospects

A review of metal phosphides with catalytic effects in Li–S batteries: boosting the redox kinetics

Recent progress in the design of metal sulfides as anode materials for sodium ion batteries

The Distance Between Phosphate‐Based Polyanionic Compounds and Their Practical Application For Sodium‐Ion Batteries

Recent Tactics and Advances in the Application of Metal Sulfides as High‐Performance Anode Materials for Rechargeable Sodium‐Ion Batteries

Red‐Phosphorus‐Based Anode Materials for Sodium‐Ion Batteries: Challenges and Progress

Phosphorus-Based Materials for High-Performance Alkaline Metal Ion Batteries: Progress and Prospect

Developing High‐Performance Metal Selenides for Sodium‐Ion Batteries