Dihexyl-Substituted Poly(3,4-Propylenedioxythiophene) as a Dual Ionic and Electronic Conductive Cathode Binder for Lithium-Ion Batteries
Pratyusha Das,Billal Zayat,Qiulong Wei,Charlene Z. Salamat,Ioan-Bogdan Magdău,Rodrigo Elizalde-Segovia,Dakota Rawlings,Dongwook Lee,Gordon Pace,Ahamed Irshad,Liwei Ye,Alexander Schmitt,Rachel A. Segalman,Thomas F. Miller,Sarah H. Tolbert,Bruce S. Dunn,Sri R. Narayan,Barry C. Thompson,Ioan-Bogdan Magdău
DOI: https://doi.org/10.1021/acs.chemmater.0c02601
IF: 10.508
2020-10-19
Chemistry of Materials
Abstract:The polymer binders used in most lithium-ion batteries (LIBs) serve only a structural role, but there are exciting opportunities to increase performance by using polymers with combined electronic and ionic conductivity. To this end, here we examine dihexyl-substituted poly(3,4-propylenedioxythiophene) (PProDOT-Hx2) as an electrochemically stable π-conjugated polymer that becomes electrically conductive (up to 0.1 S cm–1) upon electrochemical doping in the potential range of 3.2 to 4.5 V (vs Li/Li+). Because this family of polymers is easy to functionalize, can be effectively fabricated into electrodes, and shows mixed electronic and ionic conductivity, PProDOT-Hx2 shows promise for replacing the insulating polyvinylidene fluoride (PVDF) commonly used in commercial LIBs. A combined experimental and theoretical study is presented here to establish the fundamental mixed ionic and electronic conductivity of PProDOT-Hx2. Electrochemical kinetics and electron spin resonance are first used to verify that the polymer can be readily electrochemically doped and is chemically stable in a potential range of interest for most cathode materials. A novel impedance method is then used to directly follow the evolution of both the electronic and ionic conductivity as a function of potential. Both values increase with electrochemical doping and stay high across the potential range of interest. A combination of optical ellipsometry and grazing incidence wide angle X-ray scattering is used to characterize both solvent swelling and structural changes that occur during electrochemical doping. These experimental results are used to calibrate molecular dynamics simulations, which show improved ionic conductivity upon solvent swelling. Simulations further attribute the improved ionic conductivity of PProDOT-Hx2 to its open morphology and the increased solvation is possible because of the oxygen-containing propylenedioxythiophene backbone. Finally, the performance of PProDOT-Hx2 as a conductive binder for the well-known cathode LiNi0.8Co0.15Al0.05O2 relative to PVDF is presented. PProDOT-Hx2-based cells display a fivefold increase in capacity at high rates of discharge compared to PVDF-based electrodes at high rates and also show improved long-term cycling stability. The increased rate capability and cycling stability demonstrate the benefits of using binders such as PProDOT-Hx2, which show good electronic and ionic conductivity, combined with electrochemical stability over the potential range for standard cathode operation.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.chemmater.0c02601.Experimental details of synthesis and characterization; details of MD simulations; and 2D GIWAXS patterns (PDF)This article has not yet been cited by other publications.
materials science, multidisciplinary,chemistry, physical