Abstract:Using stereo synthetic aperture radar (SAR) to extract 3-D information has become an important means of continuously improving the spatial resolution and geometric positioning accuracy of spaceborne SAR. However, owing to the large differences in a stereo configuration, such as intersection angle (ITA), it is difficult to guarantee localisation accuracy. This study proposed a method for analysing the stereoscopic intersection capability and verifying the accuracy of spaceborne SAR images. The method is improved from three aspects. First, it considers the complexity of the OPSS and SASS modes and discusses the two cases separately in the theoretical modeling and experimental analysis. Secondly, in the theoretical modeling stage, the error is no longer simplified as originating from only one image, but all images have errors. Finally, the validity of the modeling conclusions is verified using multiple sets of simulated experiments and real SAR experiments. Experiments show that stereo SAR has more potential than single SAR. In the opposite-side stereo (OPSS) mode, the planimetric positioning accuracy of 35.028 m (single SAR) can be improved to 3.132 m (stereo SAR, optimal 1.641 m). By designing a reasonable stereo configuration, the geometric positioning accuracy of the original data can be significantly reduced by 31.896 m. In addition, the results show that, (1) for the symmetric OPSS mode, the planimetric accuracy can be improved, and an increase in the ITA will decrease the vertical accuracy. (2) For the same-side stereo (SASS) mode, the smaller the ITA, the higher the planimetric accuracy (except for a weak ITA). In addition, if the incidence angle (ICA) is fixed, an increase in the ITA increases the vertical accuracy. (3) The base-to-height ratio is not the only prerequisite for the stereo configuration. The recommended ITA value for symmetric OPSS mode is 52–80°, and the suggested ITA threshold for SASS mode is 10–21°. The theoretical results are generally compatible with the previous achievements, which can guide applications such as ground control point production, DSM generation, and 3-D information extraction.

Automatic Instantaneous Attitude Estimation Framework for Spacecraft Based on Colocated Optical/ISAR Observation

Instantaneous Attitude Estimation of Spacecraft Utilizing Joint Optical-and-ISAR Observation

A robust stereo feature-aided semi-direct SLAM system

Axial Attitude Estimation of Spacecraft in Orbit Based on ISAR Image Sequence

Two-Stage Attitude Estimation of Satellite from ISAR Images

Attitude Estimation and Geometry Inversion of Satellite Based on Oriented Object Detection

Optical-and-Radar Image Fusion for Dynamic Estimation of Spin Satellites

Tightly Coupled Visual–Inertial Fusion for Attitude Estimation of Spacecraft

High-Accuracy Real-Time Attitude Determination and Imagery Positioning System for Satellite-Based Remote Sensing

3-D Reconstruction of Space Target Based on Silhouettes Fused ISAR–Optical Images

Satellite position and attitude estimation using an infrared earth sensor

A Framework for SAR-Optical Stereogrammetry over Urban Areas

Rectangular Natural Feature Recognition and Pose Measurement Method for Non-Cooperative Spacecraft

Three-Dimensional High-Resolution Space-Borne ISAR Imaging With Compact Antenna Configuration for Large Rotational Angle

Uncooperative Spacecraft Pose Estimation Based on Intensity and Range Images Fusion

High-precision geometric positioning for optical remote sensing satellite in dynamic imaging

Improve Multi-Baseline InSAR Parameter Retrieval by Semantic Information from Optical Images.

Three-Dimensional Geometry Reconstruction Method from Multi-View ISAR Images Utilizing Deep Learning

A fusion strategy for reliable attitude measurement using MEMS gyroscope and camera during discontinuous vision observations

On the Information Evolution and Sensor Deployment for Multi-Spacecraft Cooperative Visual 3D Sensing of Orbital Targets

Spaceborne SAR stereoscopic intersection capability analysis and accuracy verification