Abstract:Some h-p finite element computations have been carried out to obtain solutions for fully developed laminar flows in curved pipes with curvature ratios from 0.001 to 0.5. An Oldroyd-3-constant model is used to represent the viscoelastic fluid, which includes the upper-convected Maxwell (UCM) model and the Oldroyd-B model as special cases. With this model we can examine separately the effects of the fluid inertia, and the first and second normal-stress differences. From analysis of the global torque and force balances, three criteria are proposed for this problem to estimate the errors in the computations. Moreover, the finite element solutions are accurately confirmed by the perturbation solutions of Robertson & Muller (1996) in the cases of small Reynolds/Deborah numbers.Our numerical solutions and an order-of-magnitude analysis of the governing equations elucidate the mechanism of the secondary flow in the absence of second normal-stress difference. For Newtonian flow, the pressure gradient near the wall region is the driving force for the secondary flow; for creeping viscoelastic flow, the combination of large axial normal stress with streamline curvature, the so-called hoop stress near the wall, promotes a secondary flow in the same direction as the inertial secondary flow, despite the adverse pressure gradient there; in the case of inertial viscoelastic flow, both the larger axial normal stress and the smaller inertia near the wall promote the secondary flow.For both Newtonian and viscoelastic fluids the secondary volumetric fluxes per unit of work consumption and per unit of axial volumetric flux first increase then decrease as the Reynolds/Deborah number increases; this behaviour should be of interest in engineering applications.Typical negative values of second normal-stress difference can drastically suppress the secondary flow and in the case of small curvature ratios, make the flow approximate the corresponding Poiseuille flow in a straight pipe. The viscoelasticity of Oldroyd-B fluid causes drag enhancement compared to Newtonian flow. Adding a typical negative second normal-stress difference produces large drag reductions for a small curvature ratio δ = 0.01; however, for a large curvature ratio δ = 0.2, although the secondary flows are also drastically attenuated by the second normal-stress difference, the flow resistance remains considerably higher than in Newtonian flow.It was observed that for the UCM and Oldroyd-B models, the limiting Deborah numbers met in our steady solution calculations obey the same scaling criterion as proposed by McKinley et al. (1996) for elastic instabilities; we present an intriguing problem on the relation between the Newton iteration for steady solutions and the linear stability analyses.

The rheological kolmogorov scales of viscoelastic Oldroyd-B fluids

Viscoelastic flow in rotating curved pipes

Falling Film Flow of a Viscoelastic Fluid along a Wall

Scaling Description of Frictionless Dense Suspensions under Inhomogeneous Flow

Sublinear drag regime at mesoscopic scales in viscoelastic materials

Non-Newtonian fluid-structure interaction: Flow of a viscoelastic Oldroyd-B fluid in a deformable channel

The similarity theory of free turbulent shear flows of viscoelastic fluids

Numerical study of unsteady viscoelastic flow past two side-by-side circular cylinders

Viscoelastic fluid flow in a slowly varying planar contraction: the role of finite extensibility on the pressure drop

Unifying length-scale-based rheology of dense suspensions

Fully Developed Viscous and Viscoelastic Flows in Curved Pipes

Viscoelasticity of suspension of red blood cells under oscillatory shear flow

Further validation to the variational method to obtain flow relations for generalized Newtonian fluids

Revisiting 2D Viscoelastic Kolmogorov Flow: A Centre-mode-driven transition

Elastoviscoplastic flows past a cylinder: Fluid-mechanical aspects and dynamic mode decomposition analysis

On the elongational viscosity of viscoelastic slip flows in hyperbolic confined geometries

Rheology of a dilute binary mixture of inertial suspension under simple shear flow

Fully turbulent flows of viscoplastic fluids in a rectangular duct

Lubrication of soft viscoelastic solids