Abstract:In this work, the as-cast Al x CrFeMnNi2-x (x = 0.3, 0.7, 1.0) high-entropy alloys (HEAs) were designed via the empirical criterion and equilibrium phase diagrams, and the effect of Al/Ni ratio on the microstructure and mechanical properties was investigated and discussed. An increase of Al/Ni ratio promotes the matrix phase transition from FCC to BCC phase, this mainly is attributed to the decrease of VEC. No matter it is in FCC- or BCC-dominant HEAs, the ordered B2 phase (rich-Al and Ni) always appears together with the BCC phase, but the morphology of which translates from spherical-shape to cubical-shape, and to the weave-like microstructure due to the increase of the lattice misfit constant ε. The alloy (x = 0.3) is composed of FCC matrix phase with a small amount of BCC and spherical B2 precipitates, which exhibits favorable total ductility (∼80 %), but low yield strength (∼304 MPa); An increase of Al/Ni ratio results in the increase of the yield strength, but the decrease of the ductility. The alloy (x = 0.7) consists of the BCC matrix phase with trimodal (r-p, c-p, and s-p) distribution of B2 precipitates, which exhibits the optimal mechanical properties with the yield strength (∼1158 MPa) and a relatively high total ductility (∼50 %). Further increase of Al/Ni ratio does not influence the strength considerably, but decreases the total ductility sharply. The alloy (x = 1.0) presents a yield strength (∼1119 MPa) close to that of the alloy (x = 0.7), while the ductility is very low (∼10 %). It is mainly attributed to the spinodal weave-like microstructure, which is prone to the initiation and propagation of cracks.

Effects of Fe/Ni ratio on microstructure and properties of FeNiCrAlNb high entropy alloys

Influence of Cr on Microstructure and Electrochemical Properties of FeNiMnCuCrx High-entropy Alloy

Preparation and properties of FeNiMnCuC0.2Alx high-entropy alloy

Effects of Nickel on the Microstructure, Mechanical properties and Corrosion Resistance of CoCrFeNixAl0.15Ti0.1 High Entropy Alloy

Effect of Al/Ni ratio on phase, microstructure and mechanical properties of the Al CrFeMnNi2- high entropy alloys

Effects of Co/Ni ratio on microstructure and mechanical properties of as-cast Cr-Fe-Ni-Co-Al-Si-Ti-Cu high entropy alloys

Effect of Cu content on the microstructure and corrosion resistance of AlCrFeNi3Cux high entropy alloys

Effects of Nb and Zr Alloying on the Microstructure, Mechanical Properties, and Corrosion Resistance of CoCrFeNi High-Entropy Alloys

Effect of Al content on microstructure, mechanical and corrosion properties of (Fe33Cr36Ni15Co15Ti1)100−x Al x high entropy alloys

Effect of Fe Addition on Microstructure and Properties of Al-3ni Alloys

Effect of Al content on microstructure and wear properties of FeCrNiMnAlx high-entropy alloys

Comparative Study of Mechanical and Corrosion Behaviors of Cost-Effective AlCrFeNi High Entropy Alloys

Study on strength and toughness of FeCoCrNiAlx high entropy alloy

Effects of Al and Co contents on the microstructure and properties of AlxCoCryFeNi high-entropy alloys

Effect of Heat Treatment on the Highly Corrosion-Resistant Cu70ni27.7fe2.3 Alloy

Effect of Microstructure and Performance of Nb–Cr–Fe–Ni Quaternary Alloys with the Variation of Niobium Element Content

The Effect of Increasing Nickel Content on the Microstructure, Hardness, and Corrosion Resistance of the CuFeTiZrNix High-Entropy Alloys

Effects of Cr and Ni on the microstructure and corrosion resistance of high-strength low alloy steel

Effects of Al Addition on Microstructure and Mechanical Properties of Alxcocrfeni High-Entropy Alloy

The effect of chromium additions on the mechanical properties of Ni-25Al-27.5Fe-based intermetallic compounds

Al0.3CrxFeCoNi high-entropy alloys with high corrosion resistance and good mechanical properties