Abstract:Task-constrained motion planning (TCMP) is involved in many practical applications, such as opening the door, opening the drawer, twisting the screw, and so on. Because of the trend of man-machine collaboration and the existence of dynamic in environments, planning the collision-free motions for task-constrained manipulation is a significative problem. This paper explores the TCMP issue for mobile manipulation, which uses a mobile base to enhance the working range and flexibility but simultaneously makes the problem harder than that of single manipulation because of the additional degrees of freedom (dofs). We propose an optimization-based method to plan the obstacle avoidance motion in real-time. First, the global robotic Jacobian matrix that combines the omnidirectional base and the robotic arm is derived. Second, model predictive control is used to plan the control rule in order to maximize the closest distance between the obstacles and the mobile manipulator and minimize the velocities of null space at the same time. We have deduced the model with four differential equations that represent the law of the distance over time. Third, the distances are calculated and sent to the model to calculate the velocity of each joint of the arm and the base using ACADO that is an open-source toolkit. Using the velocities, the mobile manipulator can move away from the approaching people while still fixing the end of the arm to manipulate tool at the same time. Our method is verified on the mobile manipulator that consists of four Mecanum wheels, a base, a UR10 arm, and four kinect cameras in Gazebo simulation with using the ROS operation.

A unified controller of global trajectory tracking and posture regulation for a car‐like mobile robot

Global Posture Stabilization for the Kinematic Model of a Rear-Axle Driven Car-Like Mobile Robot Considering Obstacle Avoidance

Robust Hierarchical Model Predictive Control for Trajectory Tracking with Obstacle Avoidance

Direction and Trajectory Tracking Control for Nonholonomic Spherical Robot by Combining Sliding Mode Controller and Model Prediction Controller

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Adaptive Model Prediction Control-Based Multi-Terrain Trajectory Tracking Framework for Mobile Spherical Robots

Standing Posture Control of Bipedal Robots with Adaptive Compliance under Unknown Payload Variations and External Disturbances

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

Trajectory Tracking Control of Car-like Mobile Robots Based on Extended State Observer and Backstepping Control

Simultaneous Stabilization and Tracking of Nonholonomic Mobile Robots: A Lyapunov-Based Approach

Safety-Critical Stabilization of Force-Controlled Nonholonomic Mobile Robots

Trajectory Tracking of Multi-Legged Robot Based on Model Predictive and Sliding Mode Control

Global-Position Tracking Control for Three-Dimensional Bipedal Robots Via Virtual Constraint Design and Multiple Lyapunov Analysis

GLOBAL TRAJECTORY TRACKING CONTROL OF MOBILE ROBOTS

Global-Position Tracking Control of 3-D Bipedal Walking via Virtual Constraint Design and Multiple Lyapunov Analysis

Adaptive Control for Simultaneous Stabilization and Tracking of Unicycle Mobile Robots

Provably Stabilizing Global-Position Tracking Control for Hybrid Models of Multi-Domain Bipedal Walking via Multiple Lyapunov Analysis

Design and Implementation Based on Backstepping for Tracking Control of Nonholonomic Mobile Robots

Model-Based Coordinated Trajectory Tracking Control of Skid-Steer Mobile Robot with Timing-Belt Servo System

Trajectory Re-Planning and Tracking Control for a Tractor–Trailer Mobile Robot Subject to Multiple Constraints

Vision-Based State Estimation And Trajectory Tracking Control Of Car-Like Mobile Robots With Wheel Skidding And Slipping