Abstract:Efficient improvement of paper strength while optimized sizing technique remains challenging and fascinating since specialty paper are required to low-cost, high printing quality and environmental sustainability. Herein, a novel controlled reactivity polyester glycol-based cross-linker (TBPU) applied in paper surface sizing was exploited by simple two-steps polymerization and blending process. An end-blocked structure design strategy of containing densely distributed multiple soft segments and active hydrogen nucleophilic segments (Butanone oxime, MEKO as end closure units) in isocyanate dispersion was achieved to address the scarcity of mechanical properties and the inconvenient in surface-sizing progress. TBPU can block the –NCO groups in IPDI segments at 60°C, and –NCO groups can be deblocked at the temperature higher than 110°C, which endow TBPU with latent cross-linking property. Afterward, we took advantage of the structural feature of polyhydroxy compounds and the adhesion to cellulose via using polyvinyl alcohol (PVA) as a blending component to form TBPU/PVA emulsion. The organization of –NCO groups react with hydroxyl groups, carbamate groups cross-linked with hydrogen bonds, and crystallized PCL segments generates phase-separated hierarchical domains. Serving as high-reactivity paper-sizing fillers capable of cross-linking and disintegration under an external change of temperature, the hierarchical domains can strengthen the specialty papers and enhance their water resistance and ink adhesion. The influences of TBPU content, PVA content and –NCO/–OH molar ratio on the physicochemical properties of the resultant emulsions and sized paper have been investigated. As a result, the paper sized with TBPU-1.6/PVA emulsion exhibit a tensile index of ≈107.19 Nm/g, a tearing index of ≈11.79 m N • m2/g, a folding resistance of ≈4511 s, an optimum blending temperature of 70°C and exceptional cooperation ratio with PVA and TBPU (4.0wt%, 3.0wt%), which are 1.649 times, 1.966 times, and 2.652 times than those of untreated papers (65 Nm/g, 6 m N • m2/g, 1701 s). Furthermore, sizing liquid can be conveniently applied and recycled due to their excellent environmental friendliness and Biodegradability, this work provides a promising solution for optimizing surface sizing technology.

Fabrication of Water-Based Alcoholized Poly(butylene succinate- co-adipate) Submicron Particles as Green Coating Agents for Sustainable Paper Packaging

Water‐soluble/dispersible Cationic Pressure‐sensitive Adhesives. II. Adhesives from Emulsion Polymerization

Stable aqueous dispersions of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) polymer for barrier paper coating

Synthesis of Water-Dispersible Poly(dimethylsiloxane) and Its Potential Application in the Paper Coating Industry as an Alternative for PFAS-Coated Paper and Single-Use Plastics

Sustainable paper coating with enhanced barrier properties based on esterified lignin and PBAT blend

Polyvinyl alcohol-waterborne blocked-based polyurethane composite surface sizing agents for enhancing mechanical performance of specialty paper

Facile Approach for Ecofriendly, Low-Cost, and Water-Resistant Paper Coatings via Palm Kernel Oil

Facile preparation of Pickering emulsion-based coatings for hydrophobic, oil-resistant, biodegradable green paper-based packaging

Synthesis of Biodegradable Polyester–Polyether with Enhanced Hydrophilicity, Thermal Stability, Toughness, and Degradation Rate

Design and synthesis of dimer acid-based waterborne polyurethane as water- and oil-resistant coating for paper substrates

Preparation of multi-barrier and multi-functional paper-based materials by chitosan, ethyl cellulose and green walnut husk biorefinery products for sustainable food packaging

All-biomass-based eco-friendly waterproof coating for paper-based green packaging

A high-stable soybean-oil-based epoxy acrylate emulsion stabilized by silanized nanocrystalline cellulose as a sustainable paper coating for enhanced water vapor barrier

Characterization of acid-modified polyvinyl alcohol and its application to barrier-coated paper for eco-friendly food packaging

Water and oil-resistant paper materials based on sodium alginate/hydroxypropyl methylcellulose/polyvinyl butyral/nano-silica with biodegradable and high barrier properties

Superhydrophobic Coating Polymer/Silica Nanocomposites: Enhancing Water Vapor Barrier Properties of Packaging Paper with Ultra-Thin PS/silica nanocomposite polymer Coating

Synergistic effect of polylactic acid(PLA) and Poly(butylene succinate-co-adipate) (PBSA) based sustainable, reactive, super toughened eco-composite blown films for flexible packaging applications

Cellulose nanocrystal‐modified bio‐based aqueous polyurethane coating agent for kraft paper packaging

Improving Hydrophobicity and Water Vapor Barrier Properties in Paper Using Cellulose Nanofiber-Stabilized Cocoa Butter and PLA Emulsions

Starch and Zein Biopolymers as a Sustainable Replacement for PFAS, Silicone Oil, and Plastic-Coated Paper

Performance Enhancement of Biopolyester Blends by Reactive Compatibilization with Maleic Anhydride-Grafted Poly(butylene succinate-co-adipate)