Dogs in society can prevent society going to the dogs.

D. Mills,T. de Keuster

DOI: https://doi.org/10.1016/j.tvjl.2008.07.014

IF: 2.75

2009-03-01

The Veterinary Journal

Abstract:

What problem does this paper attempt to address?

A Novel Raman Spectrum Detection System Based on an Integrated Optical Biosensor

Yang Li,Haolan Zhao,Roel Baets,Jian-Jun He

DOI: https://doi.org/10.1117/12.2575260

2020-01-01

Abstract:In recent years, there has been a growing demand for hand held and miniaturized spectroscopic Raman systems that can be employed in the field to distinguish and quantify different analytes. In this paper, a novel and integrable system to detect a Raman spectrum is presented. We present the system principle, sensor design, experimental set-up and primary measurement results. In a conventional Raman setup, the four important components are: a light source, sensor, spectrometer and detector. We utilize a tunable laser as light source in the new Raman detecting system to replace the spectrometer by scanning the pump wavelength. A Raman sensor based on silicon nitride platform which has small size and high signal-background ratio is demonstrated in this paper to enable the excitation and the collection of the Raman signal using a plasmonic slot waveguide structure. Besides the tunable laser and the Raman sensor, there are two basic devices in our system, a narrow band-pass filter and a power detector. In this work, the Raman signal of the measured molecule 4-nitrothiophenol (NTP) is obtained by scanning the pump wavelength from 735 nm to 786 nm. The light source and detector in our experiment are implemented by discrete components. Silicon photonics promises the integration of a complete on-chip Raman spectroscope where the tunable laser, detector, sensor and filter can be integrated in a millimeter sized chip. We analyze the primary results measured by the discrete devices and discuss the feasibility of the on-chip integration in the end.
Development of a cost-effective confocal Raman microscopy with high sensitivity

Ting Pan,Tian-Yu Gao,Xiang-Hua Fan,Mei-Ling Sa,Xiu-Jia Yang,Jia-Nan Xu,Xinxin Xu,Mengmeng Ma,Ran Wang,Yuewen Zhang,Weichun Ye,Yan-Ping Shi,Hai-Xia Zhang,Zhi-Cong Zeng

DOI: https://doi.org/10.1016/j.talanta.2024.126754

IF: 6.1

2024-08-30

Talanta

Abstract:Confocal Raman microscopy is a powerful technique for identifying materials and molecular species; however, the signal from Raman scattering is extremely weak. Typically, handheld Raman instruments are cost-effective but less sensitive, while high-end scientific-grade Raman instruments are highly sensitive but extremely expensive. This limits the widespread use of Raman technique in our daily life. To bridge this gap, we explored and developed a cost-effective yet highly sensitive confocal Raman microscopy system. The key components of the system include an excitation laser based on readily available laser diode, a lens-grating-lens type spectrometer with high throughput and image quality, and a sensitive detector based on a linear charge-coupled device (CCD) that can be cooled down to -30 °C. The developed compact Raman instrument can provide high-quality Raman spectra with good spectral resolution. The 3rd order 1450 cm-1 peak of Si (111) wafer shows a signal-to-noise ratio (SNR) better than 10:1, demonstrating high sensitivity comparable to high-end scientific-grade Raman instruments. We also tested a wide range of different samples (organic molecules, minerals and polymers) to demonstrate its universal application capability.
An opto-acousto-fluidic microchip for efficient Raman spectroscopy of microparticles in aqueous environment

Mehrdad Lotfi Choobbari,Margot Vandermotten,Tatevik Chalyan,Ilyesse Bihi,Pierre Gelin,Wim De Malsche,Wendy Meulebroeck,Leo A. van Grunsven,Hugo Thienpont,Heidi Ottevaere

DOI: https://doi.org/10.1016/j.snb.2024.136300

IF: 9.221

2024-07-18

Sensors and Actuators B Chemical

Abstract:2-D and 3-D Raman mapping are powerful imaging techniques for creating chemical images and compositional analysis of materials. Nevertheless, integration and implementation of Raman mapping on a microfluidic system turns out to be arduous due to several challenges, including the movement of sample, low efficiency of detection, low signal-to-noise ratio, and long measurement times. This study introduces a multimodal microchip for concurrent measurement of Raman signal in both forward- and backward-scattering modes from microparticles (MPs) in an aqueous environment. The microchip integrates microfluidic, acoustic, and optical components, synergistically manipulating and stabilizing a cluster of MPs through the application of precise local acoustic forces. The optical components orchestrate the laser and Raman signals, effectively addressing the total internal reflection challenge and significantly enhancing the Raman signal collection efficiency by a factor of ≈ 32 in comparison to a conventional microfluidic chip. The adoption of dual-mode measurement of Raman signal facilitates the creation of a 2-D Raman image, offering a representative view of a 3-D volume image. This practical methodology not only expedites the measurement process from 4 days to 1.5 hours, but also provides a comprehensive analysis of the clustered entities. To benchmark the versatility and applicability of the developed microchip, the Raman signal of microplastics of different types and human hepatoma HepG2 cells are fully investigated. The meticulous bottom-up approach presented herein holds great promise for advancing efficient and high-throughput sample monitoring in aqueous conditions using Raman spectroscopy.

chemistry, analytical,electrochemistry,instruments & instrumentation
High-Throughput Raman Spectroscopy Combined with Innovate Data Analysis Workflow to Enhance Biopharmaceutical Process Development

Stephen Goldrick,Alexandra Umprecht,Alison Tang,Roman Zakrzewski,Matthew Cheeks,Richard Turner,Aled Charles,Karolina Les,Martyn Hulley,Chris Spencer,Suzanne S. Farid

DOI: https://doi.org/10.3390/pr8091179

IF: 3.5

2020-09-17

Processes

Abstract:Raman spectroscopy has the potential to revolutionise many aspects of biopharmaceutical process development. The widespread adoption of this promising technology has been hindered by the high cost associated with individual probes and the challenge of measuring low sample volumes. To address these issues, this paper investigates the potential of an emerging new high-throughput (HT) Raman spectroscopy microscope combined with a novel data analysis workflow to replace off-line analytics for upstream and downstream operations. On the upstream front, the case study involved the at-line monitoring of an HT micro-bioreactor system cultivating two mammalian cell cultures expressing two different therapeutic proteins. The spectra generated were analysed using a partial least squares (PLS) model. This enabled the successful prediction of the glucose, lactate, antibody, and viable cell density concentrations directly from the Raman spectra without reliance on multiple off-line analytical devices and using only a single low-volume sample (50–300 μL). However, upon the subsequent investigation of these models, only the glucose and lactate models appeared to be robust based upon their model coefficients containing the expected Raman vibrational signatures. On the downstream front, the HT Raman device was incorporated into the development of a cation exchange chromatography step for an Fc-fusion protein to compare different elution conditions. PLS models were derived from the spectra and were found to predict accurately monomer purity and concentration. The low molecular weight (LMW) and high molecular weight (HMW) species concentrations were found to be too low to be predicted accurately by the Raman device. However, the method enabled the classification of samples based on protein concentration and monomer purity, allowing a prioritisation and reduction in samples analysed using A280 UV absorbance and high-performance liquid chromatography (HPLC). The flexibility and highly configurable nature of this HT Raman spectroscopy microscope makes it an ideal tool for bioprocess research and development, and is a cost-effective solution based on its ability to support a large range of unit operations in both upstream and downstream process operations.

engineering, chemical
Optical Fiber Probe with Integrated Micro-Optical Filter for Raman and Surface-Enhanced Raman Scattering Sensing

Md Abdullah Al Mamun,Tomas Katkus,Anita Mahadevan-Jansen,Saulius Juodkazis,Paul R Stoddart

DOI: https://doi.org/10.3390/nano14161345

2024-08-14

Abstract:Optical fiber Raman and surface-enhanced Raman scattering (SERS) probes hold great promise for in vivo biosensing and in situ monitoring of hostile environments. However, the silica Raman scattering background generated within the optical fiber increases in proportion to the length of the fiber, and it can swamp the signal from the target analyte. While filtering can be applied at the distal end of the fiber, the use of bulk optical elements has limited probe miniaturization to a diameter of 600 µm, which in turn limits the potential applications. To overcome this limitation, femtosecond laser micromachining was used to fabricate a prototype micro-optical filter, which was directly integrated on the tip of a 125 µm diameter double-clad fiber (DCF) probe. The outer surface of the microfilter was further modified with a nanostructured, SERS-active, plasmonic film that was used to demonstrate proof-of-concept performance with thiophenol as a test analyte. With further optimization of the associated spectroscopic system, this ultra-compact microprobe shows great promise for Raman and SERS optical fiber sensing.
Blood distribution through the lung after pneumonectomy: a quantitative assessment by 131-I.

A. Cellerino,A. Andreone,P. Borasio

Abstract:
Multicomponent Gas Sensing Fiber Probe System Based on Platinum Coated Capillary Enhanced Raman Spectroscopy

Minghong Yang,Zhixiong Liu,Qilu Nie,Mengen Cheng,Shilong Pei,Dexun Yang,Cheng Cheng,Donglai Guo

DOI: https://doi.org/10.1021/acssensors.4c00606

2024-09-06

Abstract:This paper proposes a novel multicomponent gas-sensing optical fiber probe system. It utilizes a precisely engineered Platinum-coated capillary fabricated via Atomic Layer Deposition (ALD) technology as the core for enhanced Raman spectroscopy, marking the first application of ALD in creating such a structure for gas Raman sensing. The noble metal capillary gas Raman probe demonstrates a low detection limit of 55 ppm for CO2 with a 30 s exposure time and good repeatability in multicomponent gas sensing. The capillary exhibits excellent stability, environmental resistance, and a large core diameter, enabling a rapid gas exchange rate and making it suitable for practical applications.
Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection

Nela Skowronkova,Martin Adamek,Magdalena Zvonkova,Jiri Matyas,Anna Adamkova,Stepan Dlabaja,Martin Buran,Veronika Sevcikova,Jiri Mlcek,Zdenek Volek,Martina Cernekova

DOI: https://doi.org/10.3390/s24206594

IF: 3.9

2024-10-14

Sensors

Abstract:This paper explores an application of 3D printing technology on the food industry. Since its inception in the 1980s, 3D printing has experienced a huge rise in popularity. This study uses cost-effective, flexible, and sustainable components that enable specific features of certain gas chromatography. This study aims to optimize the process of gas detection using a 3D printed separation column and the MiCS-6814 sensor. The principle of the entire device is based on the idea of utilizing a simple capillary chromatographic column manufactured by 3D printing for the separation of samples into components prior to their measurement using inexpensive chemiresistive sensors. An optimization of a system with a 3D printed PLA block containing a capillary, a mixing chamber, and a measuring chamber with a MiCS-6814 sensor was performed. The optimization distributed the sensor output signal in the time domain so that it was possible to distinguish the peak for the two most common alcohols, ethanol and methanol. The paper further describes some optimization types and their possibilities.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Scalable Miniature On-chip Fourier Transform Spectrometer For Raman Spectroscopy

Sarp Kerman,Xiao Luo,Zuoqin Ding,Zhewei Zhang,Zhuo Deng,Xiaofei Qin,Yuran Xu,Shuhua Zhai,Chang Chen

2024-11-02

Abstract:Miniaturized spectrometers for Raman spectroscopy have the potential to open up a new chapter in sensing. Raman spectroscopy is essential for material characterization and biomedical diagnostics, however, its weak signal and the need for sub-nanometer resolution pose challenges. Conventional spectrometers, with footprints proportional to optical throughput and resolution, are difficult to integrate into compact devices such as wearables. Waveguide-based Fourier Transform Spectrometers (FTS) enable compact spectrometers, and multi-aperture designs can achieve high throughput for applications such as Raman spectroscopy, however, experimental research in this domain remains limited. In this work, we present a multi-aperture SiN waveguide-based FTS overcoming these limitations and enabling Raman spectroscopy of isopropyl alcohol, glucose, Paracetamol, and Ibuprofen with enhanced throughput. Our spectrometer chip, fabricated on a 200 mm SiN wafer, with 160 edge-coupled waveguide apertures connected to an array of ultra-compact interferometers and a small footprint of just 1.6 mm x 4.8 mm, achieves a spectral range of 40 nm and a resolution of 0.5 nm. Experimental results demonstrate that least absolute shrinkage and selection operator (LASSO) regression significantly enhances Raman spectrum reconstruction. Our work on waveguide-based spectrometry paves the way for integrating accurate and compact Raman sensors into consumer electronics and space exploration instruments.

Optics,Applied Physics
Optical Fiber Probe for Biomedical Raman Spectroscopy

Jason T Motz,Martin Hunter,Luis H Galindo,Joseph A Gardecki,John R Kramer,Ramachandra R Dasari,Michael S Feld,Jason T. Motz,Luis H. Galindo,Joseph A. Gardecki,John R. Kramer,Ramachandra R. Dasari,Michael S. Feld

DOI: https://doi.org/10.1364/ao.43.000542

IF: 1.9

2004-01-20

Applied Optics

Abstract:In vitro experiments have demonstrated the ability of Raman spectroscopy to diagnose a wide variety of diseases. Recent in vivo investigations performed with optical fiber probes were promising but generally limited to easily accessible organs, often requiring relatively long collection times. We have implemented an optical design strategy to utilize system throughput fully by characterizing the Raman distribution from tissue. This scheme optimizes collection efficiency, minimizes noise, and has resulted in small-diameter, highly efficient Raman probes that are capable of collecting high-quality data in 1 s. Performance has been tested through simulations and experiments with tissue models and several in vitro tissue types, demonstrating that this new design can advance Raman spectroscopy as a clinically practical technique.

optics
Unsupervised data driven approaches to Raman imaging through a multimode optical fiber

Liam Collard,Mohammadrahim Kazemzadeh,Massimo De Vittorio,Ferruccio Pisanello

2024-05-22

Abstract:Raman spectroscopy is a label-free, chemically specific optical technique which provides detailed information about the chemical composition and structure of the excited analyte. Because of this, there is growing research interest in miniaturizing Raman probes to reach deep regions of the body. Typically, such probes utilize multiple optical fibers to act as separate excitation/collection channels with optical filters attached to the distal facet to separate the collected signal from the background optical signal from the probe itself. Although these probes have achieved impressive diagnostic performance, their use is limited by the overall size of the probe, which is typically several hundred micrometers to millimeters. Here, we show how a wavefront shaping technique can be used to measure Raman images through a single, hair thin multimode fiber. The wavefront shaping technique transforms the tip of the fiber to a sub-cellular spatial resolution Raman microscope. The resultant Raman images were analyzed with a variety of state-of-the-art statistical techniques including PCA, t-SNE, UMAP and k-means clustering. Our data-driven approach enables us to create high quality Raman images of microclusters of pharmaceuticals through a standard silica multimode optical fiber.

Optics,Chemical Physics
Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

Baomei Zhou,Cheng Qu,Shanshan Du,Wanjun Gao,Yu Zhang,Yan Ding,Hongyan Wang,Ruyan Hou,Mengke Su,Honglin Liu

DOI: https://doi.org/10.1021/acs.analchem.2c00252

IF: 7.4

2022-05-17

Analytical Chemistry

Abstract:High-throughput surface-enhanced Raman scattering (SERS) reader, especially for liquid sample testing, is of great significance and huge demand in biology, environment, and other analytical fields. Inspired by the principle of microplate reader, herein, we developed a microplate-SERS reader for semiautomatic and high-throughput assays by virtue of three-dimensional liquid interfacial arrays (LIAs). For the first time, the formation of LIA in oil-in-water state, water-in-oil state, and two-dimensional plane state is realized by operating the hydrophilicity (contact angle) of the container. Through the force analysis of LIA, the effect of organic (O) phase density on the relative position of LIA was quantified. In addition, the optimized reader offers fast and continuous semiautomatic detection of 12 samples below 10 min with great signal reproducibility (calibration with the characteristic peak of O phase as the internal standard). The isolated wells in the microplate prevent analyte cross talk, allowing accurate quantification of each sample. Multiplex analysis capability highlights that this reader has the ability of rapid identification and quantification of samples containing various analytes and concentrations. The results demonstrate high-resolution dual and triple analyte detection with fully preserved signal and Raman features of individual analytes in a mixture, which implies that it also has excellent anticounterfeiting applications. This microplate-SERS reader combines the superior advantages of the LIA, microplate, and SERS techniques to retrieve the molecular vibrational fingerprints of various chemicals in complex media.

chemistry, analytical
Plasmonic Based Raman sensor for Ultra-sensitive detection of Pharmaceutical waste

Mohamed Riad Hamode,Alon Krause,Maria shehadeh,Tchiya Zar,bruria schmerling,Iddo Pinkas,David Zitoun,Adi Salomon

DOI: https://doi.org/10.1039/d3en00821e

2024-03-12

Environmental Science Nano

Abstract:Pharmaceutical waste and contaminants pose a significant global concern for water and food safety. The detection of piperidine, a common residue in drug and supplement synthesis, is critical due to its toxic nature to both humans and animals. In this study, we develop a plasmonic-based detector for surface enhanced Raman scattering (SERS) measurements. The plasmonic device is composed of triangular cavities, milled in silver thin film and protected by 5 nm of SiO2 layer. Due to the confined and enhanced electromagnetic field, remarkable sensitivity to piperidine with concentration of 10-8M in water is achieved. Despite the relative small polarizability of piperidine, high sensitivity is observed even when using a low numerical aperture of 0.3., attributing to the directional scattring from our plasmonic device. Thus, It offers a cost-effective alternative to traditional high numerical aperture used in SERS, and the ability to use a portable Raman device for a cheaper and faster analysis.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
Simple and Low‐Cost Plasmonic Fiber‐Optic Probe as SERS and Biosensing Platform

Yun Liu,Jianye Guang,Chuan Liu,Sheng Bi,Qiang Liu,Ping Li,Ning Zhang,Shimeng Chen,Huizhen Yuan,Dapeng Zhou,Wei Peng

DOI: https://doi.org/10.1002/adom.201900337

IF: 9

2019-07-01

Advanced Optical Materials

Abstract:As an emerging and promising paradigm of nanophotonic "lab‐on‐a‐chip" devices, plasmonic fiber‐optic (FO) probes with nanopatterns suffer from high cost and a complex fabrication process, which keep them from becoming the preferred choice for most optical fiber sensing applications. In this paper, a nanopatterned FO probe is demonstrated to be a surface‐enhanced Raman spectroscopy substrate and a plasmonic biosensor through theoretical simulations and experiments. The probe is assembled with imprinted nanocavities on the tip of the optical fiber and fabricated through a low‐cost and facile method. The FO probe overcomes the shortcomings of conventional optical fiber sensors that have nanoscale patterns and structures, such as requiring a complex and time‐consuming procedure, expensive specialized instruments, and experienced professional operation. Through investigating its surface sensitivity and the plasmonic coupling effect between Au nanoparticles and the nanocavity, this probe is found to have practical applications in the detection of biochemical molecules. The proposed FO probe can be produced under common experimental conditions, and its operation is simple and understandable, which serves as a new strategy for fabricating nanostructures on fiber tips.

materials science, multidisciplinary,optics
Assembly and characterization of an optical fiber probe for use in a portable Raman spectrometer

Carlos José de Lima Landulfo Silveira Vitor da Silva Rosa Murilo Antunes Alves Lucindo Marcos Tadeu Tavares Pacheco a Universidade Anhembi Morumbi – UAM,São Paulo,Brazilb Mechanical Engineering Department,Universidade Santa Cecília – UNISANTA,Santos,Brazilc Center for Innovation,Technology and Education – CITÉ,Parque de Inovação Tecnológica de São José dos Campos – PIT,São José dos Campos,Brazild Power Platform Developer,MODEC,Santos,SP,Brazil

DOI: https://doi.org/10.1080/10739149.2024.2392012

2024-08-21

Instrumentation Science & Technology

Abstract:This study describes the assembly and testing of an optical fiber Raman probe for use in a portable spectrometer using a 785 nm laser. The Raman probe was tested on edible vegetable oils (extra virgin olive, canola, sunflower, corn, and soybean), with the distal end of the probe immersed in each sample. The spectra of a dipyrone tablet and a mothball were also obtained. The silica peaks were subtracted by taking a spectrum with the probe tip immersed in water. The spectra of the samples exhibited characteristic peaks from vibrations of unsaturated fatty acids between 900 and 1800 cm −1 , as well as characteristic peaks of silica from 600 to 1200 cm −1 . The spectra of the samples after subtraction of the silica spectrum (probe in water) showed characteristic peaks without alterations in position or relative intensities compared without the probe. Exploratory analysis by principal component analysis was able to identify peaks of the constituent fatty acids in the oils and associate them with the oil type. A classification model based on partial least squares regression allowed for the classification of oil spectra with an accuracy of 77%. This study demonstrated the feasibility of coupling a probe to a portable Raman spectrometer with the goal of monitoring and controlling industrial processes.

chemistry, analytical,instruments & instrumentation
Thermography in surveillance of ulcerative colitis — Case report

T. Bozin,Svetlana Antonim,Darko Kolanc,Ž. Ferenčić,T. Kuliš,M. Banic

DOI: https://doi.org/10.1109/ELMAR.2015.7334486

2015-11-23

Abstract:Ulcerative colitis represents a chronic condition occurring in relapsing and remitting fashion with uncertain outcome and requires lifelong treatment with considerable sideffects. Diagnostic methods currently in use give an insight into disease activity, but are possibly associated with significant discomfort for the patient. For that reason there is a need for a noninvasive, biologically inert method for evaluation of disease activity in inflammatory bowel disease. The aim of this paper is to present the potential of thermography in surveillance of ulcerative colitis. The authors present two cases of patients with ulcerative pancolitis. The thermographic patterns, taken before starting the anti-inflammatory treatment, and upon reaching the remission of the disease correlated with clinical and laboratory, and endoscopic findings, as well. This case report points out to diagnostic potential of infrared thermography as a feasible and noninvasive method in evaluation of disease activity, such as acute pancolitis.
Digital Microfluidics with Integrated Raman Sensor for High-Sensitivity In-Situ Bioanalysis

Wenbo Dong,Rongxin Fu,Nan Zhang,Jing Zhao,Yudan Ma,Han Cui,Jiangjiang Zhang,Zipeng Zhao,Hang Li,Yunxia Zhao,Yao Lu,Zhizhong Chen,Tianming Xu,Huikai Xie,Qian Yu,Shuailong Zhang

DOI: https://doi.org/10.1016/j.bios.2024.117036

IF: 12.545

2024-01-01

Biosensors and Bioelectronics

Abstract:This study introduces an advanced bioanalytical platform that combines digital microfluidics (DMF) with Raman spectroscopy, effectively addressing common issues in bioanalysis such as sample contamination, excessive consumption of samples and reagents, and manual handling. Our innovative system is engineered to handle diverse sample types and enables both sample preparation and in-situ analysis on a single device, utilizing less than 5μL of samples and reagents. It incorporates a Translucent Raman Enhancement Stack (TRES) sensor, which boosts the detection signal, and includes droplet-driving functionality for automated processing of complex samples in a compact setting. The hydrophilic surface of the TRES sensor draws analytes into the detection zone, expediting sample attachment and enhancing the surface-enhanced Raman scattering (SERS). Moreover, the TRES sensors are cost-effective, straightforward to manufacture, and scalable, making them suitable for widespread production and single-use bioanalytical applications. This integrated and automated approach streamlines the sample preparation and analysis processes, enhances detection efficiency, and achieves high sensitivity, excellent linearity, and effective detection of different biochemical analytes. We validate the system's accuracy through on-device enrichment and analysis of exosomes from serum, demonstrating its capability for real-time, on-site analysis of complex biological samples.
Volumetric Enhancement of Raman Scattering for Fast Detection Based on a Silver-Lined Hollow-Core Fiber

Qian Chu,Zhiqiang Jin,Xingtao Yu,Caoxin Li,Weihua Zhang,Wenbing Ji,Bo Lin,Perry Ping Shum,Xuping Zhang,Guanghui Wang

DOI: https://doi.org/10.1364/oe.27.010370

IF: 3.8

2019-01-01

Optics Express

Abstract:Fast detection and identification of chemicals are of utmost importance for field testing and real-time monitoring in many fields. Raman spectroscopy is the predominant technique in principle, but its wide application is limited on account of weak scattering efficiency. Surface Enhanced Raman Spectroscopy (SERS) technique provides a solution for signal enhancement, but may not good at fast detection due to cross contamination and bulky instruments. Hollow-core fiber-based Raman cell with long interaction length can achieve high detection sensitivity, but it also suffers from low flow rate, bulky high-pressure equipment and light coupling structure, which also restricts its application for fast detection. In order to solve those problems, we proposed a portable Raman cell, by using metal-lined hollow-core fibers (MLHCF) with large bandwidth, good field confinement, extremely large numerical aperture and arbitrary length. With our proposed fiber inserted light coupling and light reflecting method, a Raman cell of 3.1 cm in length provides nearly 50 times of signal enhancement compared with direct detection using bare fiber tip. Furthermore, the sample exchange rate could be as fast as 1 second even under normal pressure without any cross contamination. At last, we also demonstrated the underlying general mechanism of signal enhancement and summarized it as volumetric enhancement of Raman scattering (VERS). Both the experiment results and the theoretical analysis demonstrated that our device has the potential for fast online Raman detection, which also possesses high-sensitivity and high-accuracy.
3D Multilayered Metamaterials with High Plasmonic Hotspot Density for Surface—Enhanced Raman Spectroscopy

Jun Chen,Chai Zhang,Feng Tang,Xin Ye,Yubin Zhang,Jingjun Wu,Kaixuan Wang,Ning Zhang,Liming Yang

DOI: https://doi.org/10.3390/coatings13050844

IF: 3.236

2023-04-29

Coatings

Abstract:Three-dimensional (3D) plasmonic metamaterials have become a trend in the application of nanophotonic devices. In this paper, a convenient and inexpensive method for the design of 3D multilayer plasmonic metamaterials is constructed using a one-step self-shielded reactive-ion-etching process (OSRP) and a thermal evaporation system, which provides an efficient and low-cost method for the preparation of surface-enhanced Raman spectroscopy (SERS) substrates. The near-field enhancement of the 3D plasmonic metamaterials provides highly efficient electromagnetic resonance, and highly sensitive and uniform SERS sensing capabilities. The SERS detection results of rhodamine B (Rh. B) and rhodamine 6G (R6G) on this substrate show that the detection limit could reach 10–13 mol/L, and the signal could give expression to excellent uniform stability. The results show that high sensitivity and high robustness SERS substrates can be prepared with high efficiency and low cost.

materials science, multidisciplinary,physics, applied, coatings & films
RSPSSL: A novel high-fidelity Raman spectral preprocessing scheme to enhance biomedical applications and chemical resolution visualization

Jiaqi Hu,Gina Jinna Chen,Chenlong Xue,Pei Liang,Yanqun Xiang,Chuanlun Zhang,Xiaokeng Chi,Guoying Liu,Yanfang Ye,Dongyu Cui,De Zhang,Xiaojun yu,Hong Dang,Wen Zhang,Junfan Chen,Quan Tang,Penglai Guo,Ho-Pui Ho,Yuchao Li,Longqing Cong,Perry Ping Shum

DOI: https://doi.org/10.1038/s41377-024-01394-5

2024-02-20

Abstract:Abstract Raman spectroscopy has tremendous potential for material analysis with its molecular fingerprinting capability in many branches of science and technology. It is also an emerging omics technique for metabolic profiling to shape precision medicine. However, precisely attributing vibration peaks coupled with specific environmental, instrumental, and specimen noise is problematic. Intelligent Raman spectral preprocessing to remove statistical bias noise and sample-related errors should provide a powerful tool for valuable information extraction. Here, we propose a novel Raman spectral preprocessing scheme based on self-supervised learning (RSPSSL) with high capacity and spectral fidelity. It can preprocess arbitrary Raman spectra without further training at a speed of ~1 900 spectra per second without human interference. The experimental data preprocessing trial demonstrated its excellent capacity and signal fidelity with an 88% reduction in root mean square error and a 60% reduction in infinite norm ( $${L}_{{\infty }}$$ L ∞ ) compared to established techniques. With this advantage, it remarkably enhanced various biomedical applications with a 400% accuracy elevation (ΔAUC) in cancer diagnosis, an average 38% (few-shot) and 242% accuracy improvement in paraquat concentration prediction, and unsealed the chemical resolution of biomedical hyperspectral images, especially in the spectral fingerprint region. It precisely preprocessed various Raman spectra from different spectroscopy devices, laboratories, and diverse applications. This scheme will enable biomedical mechanism screening with the label-free volumetric molecular imaging tool on organism and disease metabolomics profiling with a scenario of high throughput, cross-device, various analyte complexity, and diverse applications.

optics

Dogs in society can prevent society going to the dogs.

A Novel Raman Spectrum Detection System Based on an Integrated Optical Biosensor

Development of a cost-effective confocal Raman microscopy with high sensitivity

An opto-acousto-fluidic microchip for efficient Raman spectroscopy of microparticles in aqueous environment

High-Throughput Raman Spectroscopy Combined with Innovate Data Analysis Workflow to Enhance Biopharmaceutical Process Development

Optical Fiber Probe with Integrated Micro-Optical Filter for Raman and Surface-Enhanced Raman Scattering Sensing

Blood distribution through the lung after pneumonectomy: a quantitative assessment by 131-I.

Multicomponent Gas Sensing Fiber Probe System Based on Platinum Coated Capillary Enhanced Raman Spectroscopy

Optimizing Low-Cost Gas Analysis with a 3D Printed Column and MiCS-6814 Sensor for Volatile Compound Detection

Scalable Miniature On-chip Fourier Transform Spectrometer For Raman Spectroscopy

Optical Fiber Probe for Biomedical Raman Spectroscopy

Unsupervised data driven approaches to Raman imaging through a multimode optical fiber

Multi-analyte High-Throughput Microplate-SERS Reader with Controllable Liquid Interfacial Arrays

Plasmonic Based Raman sensor for Ultra-sensitive detection of Pharmaceutical waste

Simple and Low‐Cost Plasmonic Fiber‐Optic Probe as SERS and Biosensing Platform

Assembly and characterization of an optical fiber probe for use in a portable Raman spectrometer

Thermography in surveillance of ulcerative colitis — Case report

Digital Microfluidics with Integrated Raman Sensor for High-Sensitivity In-Situ Bioanalysis

Volumetric Enhancement of Raman Scattering for Fast Detection Based on a Silver-Lined Hollow-Core Fiber

3D Multilayered Metamaterials with High Plasmonic Hotspot Density for Surface—Enhanced Raman Spectroscopy

RSPSSL: A novel high-fidelity Raman spectral preprocessing scheme to enhance biomedical applications and chemical resolution visualization