Abstract: Background: Biomodeling in integration with digital imaging techniques such as intra-oral scanning and cone-beam computerized tomography (CBCT) is being commonly practiced in dental implantology for pre-operative treatment planning, clinical teaching and evaluating bone density and drilling techniques. The objective of following study was to assess the quantitative accuracy of CBCT-derived mandibular biomodels.Methods: A CBCT dataset was segmented and mandible was isolated. Fifteen mandibular biomodels were fabricated utilizing multijet (MJ=4), digital light processing (DLP=4), stereolithography (SLA=2), fused deposition modeling (FDM=2), colorjet (CJ=2) and selective laser sintering (LS=1) based high-end commercial and in-house printers. Printed models were superimposed onto the original mandible for comparing surface accuracy. A part comparison analysis with color-coded map was carried out for evaluating the difference between each printed and original model surface.Results: MJ technology showed least amount of error associated with both erupted and impacted teeth. Highest bony surface accuracy was achieved with SLA and LS based biomodels. Trabecular structures were most accurately printed with MJ printers. FDM technology had the highest overall absolute mean error associated with both teeth and bone. No significant differences were observed between each surface of original and printed models.Conclusions: Overall biomodels were able to well replicate skeletal and dental anatomical surfaces. However, some models showed shortcomings in relation to depicting trabecular architecture which might influence bone density for drilling bone and placing dental implants. Background. On the base of the state of the art on the applications of augmented reality (AR) in dentistry from previous studies a new system was developed and in vivo tested with Institutional Review Board approval of the Ethics Committee of Policlinico of Milan (n. 421). The purpose of the new system is to provide a new light, portable hand-held smart device which provides a compound superimposed dynamic vision of the anatomical structures of the patient, radiologic exams and digitally positioned medical devices for AR-guided operations.Methods. CBCT data and the .stl files of miniscrews (TADs), (Leone, Firenze, Italy), were imported in a dicom viewer, placed in the correct position and fixed, then exported to .stl format separately. The digital images were uploaded to a server and opened with a smart, light hand-held hardware. The hardware was placed in front of the patient placed in N.H.P and the new software was started. Superimposition was regulated with pinch gesture on the touch screen until correct positioning of the frontal teeth of the patient, the opacity of digital images were regulated with a function of the software. The superimposition was automatically stabilized by a function of the software using software development kit (SDK) engines. Tads were placed under the guide of the compound vision. Time measurements were taken on superimposition by different operators and the error was calculated with a digital caliper.Results. The new system provided effectively a dynamic functional compound superimposition of anatomical structures and previously digitally placed medical devices. The error in the positioning of the TADs was calculated as < of 0.3 mm for both while time measurements of the superimposition session were less than 5 minutes for each session.Conclusions. The new proposed system effectively provides a simple and light dynamic AR superimposition of digital data on a surgical site providing the clinician a compound vision of anatomical structures. The TADs were placed with AR assisted surgery with a acceptable error, further in vivo and in vitro studies are needed. Purpose. Modern implantology has been focused on the peri-implant mucosa maturation patterns, with particular attention on the frontal area, aiming to obtain an optimal aesthetic result. The purpose of the following study is to analyze height/width proportion in the peri-implant buccal tissues between two different types of connection: Flat to Flat and Magic Five Cone Morse Connection (Anyridge®).Methods. The present study analyzes 294 implants, the measurements were done with digital 3D technology at one year from the provisional crown placement. Every single implant was matched with its own Scan Body and was scanned with 3Shape D700, in order to obtain a tridimensional section of the model. Peri-implant measurements included the width of the peri-implant mucosa (HV), calculated from the implant connection to the buccal mucosa surface on a line perpendicular to the main implant axis. For the height of the peri-implant tissues (VV), we considered as well, the same geometrical line as the apical point of the measure to -Abstract Truncated-

Automatic Segmentation of the Jaws Used in Guided Insertion of Orthodontic Mini Implants to Improve Their Stability and Precision

Accuracy of dental implant surgery with robotic position feedback and registration algorithm: An <i>in</i>-<i>vitro</i> study

Radiographic and Surgical Template for Placement of Orthodontic Microimplants in Interradicular Areas: A Technical Note

Proceeding of the International Digital Dentistry Society World Congress, Baden Baden 2019

A 3D finite element analysis of biomechanical effects on teeth and bone during true intrusion of anteriors using miniscrews

Quantitative Evaluation of Maxillary Interradicular Bone with Cone-Beam Computed Tomography for Bicortical Placement of Orthodontic Mini-Implants.

Three-dimensional digital imaging analysis of the palatal bone thickness for orthodontic mini-implant insertion – determination of the safe zone and angulation

A unique artificial intelligence-based tool for automated CBCT segmentation of mandibular incisive canal

Interactive design of dental implant placements through CAD-CAM technologies: from 3D imaging to additive manufacturing

Clinical effectiveness of orthodontic miniscrew implantation guided by a novel cone beam CT image-based computer aided design and computer aided manufacturing (CAD-CAM) template

A cross-sectional CBCT assessment of the relative position of one-piece titanium-zirconium mini-implants placed for mandibular overdentures using non-guided surgery

Artificial intelligence-assisted determination of available sites for palatal orthodontic mini-implants based on palatal thickness through CBCT.

Reliability and safety of miniscrew insertion planning with the use of lateral cephalograms assessed on corresponding cone-beam computer tomography images

Evaluation of in vivo digital root reconstruction based on anatomical characteristics of the periodontal ligament using cone beam computed tomography.

Evaluation of the 3D Augmented Reality-Guided Intraoperative Positioning of Dental Implants in Edentulous Mandibular Models

A New Software Suite in Orthognathic Surgery : Patient Specific Modeling, Simulation and Navigation

Accurate Movement of Jaw Segment in Virtual 3D Orthognathic Surgery

A New Methodology for the Digital Planning of Micro-Implant-Supported Maxillary Skeletal Expansion

Maxillary Molar Intrusion Evaluation using Mini-implants along with Transpalatal Arch Bar

Clinical Evaluation of Semi-Automatic Opensource Algorithmic Software Segmentation of the Mandibular Bone: Practical Feasibility and Assessment of a New Course of Action.

Mandibular Virtual Reconstruction Surgery Guided by Mimics