Mort Levin and the emergence of chronic disease epidemiology.

W. Winkelstein

DOI: https://doi.org/10.1097/EDE.0B013E318154C9E4

2007-11-01

Epidemiology

Abstract:

What problem does this paper attempt to address?

Stretchable, compressible, and conductive hydrogel for sensitive wearable soft sensors

Xuwen Peng,Wenda Wang,Wenshuai Yang,Jingsi Chen,Qiongyao Peng,Tao Wang,Diling Yang,Jianmei Wang,Hao Zhang,Hongbo Zeng

DOI: https://doi.org/10.1016/j.jcis.2022.03.037

IF: 9.9

2022-07-01

Journal of Colloid and Interface Science

Abstract:Conductive hydrogels hold great promises in wearable soft electronics. However, the weak mechanical properties, low sensitivity and the absence of multifunctionalities (e.g., self-healing, self-adhesive, etc.) of the conventional conductive hydrogels limit their applications. Thus, developing multifunctional hydrogels may address some of these technical issues. In this work, a multifunctional conductive hydrogel strain sensor is fabricated by incorporating a conductive polymer Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT: PSS) into a mechanically robust poly (vinyl alcohol) (PVA)/ poly (acrylic acid) (PAA) double network (DN) hydrogel. The as-prepared hydrogel sensor could span a wide spectrum of mechanical properties by simply tuning the polymer composition and the number of freezing-thawing cycles. In addition, the dynamic hydrogen bonding interactions endow the hydrogel sensor with self-healing property and reversible adhesiveness on diverse substrates. Moreover, the hydrogel sensor shows high sensitivity (Gauge Factor from 2.21 to 3.82) and can precisely detect some subtle human motions (e.g., pulse and vocal cord vibration). This work provides useful insights into the development of conductive hydrogel-based wearable soft electronics.

chemistry, physical
Biocompatible polysaccharide ionic hydrogel as ultra-stretchable and multifunctional wearable sensor

Yuchen Zhou,Tianyi Dai,Yaqi Cheng,Qingchen Deng,Xueyu Li,Hao Wu,Wenjiao Han,Hongbing Jia

DOI: https://doi.org/10.1007/s10853-022-07635-5

IF: 4.5

2022-08-30

Journal of Materials Science

Abstract:Due to their promising applications in health monitoring, wearable flexible sensors based on hydrogel have gained considerable attention as modern medicine advances. However, it is still challenging for hydrogel-based wearable flexible sensors to be integrated with high stretchability, multifunctionality, and biocompatibility. Herein, we designed novel flexible multifunctional sensors based on ionic conductive double-network (DN) hydrogels composed of poly (acrylamide-co-acrylic acid) (P(AM-co-AAc)), sodium alginate (SA), and calcium chloride (CaCl2) by simple two-step method of copolymerization and soaking. Abundant carboxyl groups on SA and P(AM-co-AAc) chains and their capacity to bind with Ca2+ were utilized to design a double network, providing the hydrogels with high stretchability and toughness. Ca2+ endowed the hydrogels with enhanced conductivity and sensitivity, while P(AM-co-AAc) enabled the hydrogels to respond to multi-stimuli. The SA/P(AM-co-AAc)/Ca2+ hydrogels presented outstanding mechanical properties (elongation at break of 2626%, tensile strength of 372 kPa), great sensitivity (gauge factor up to 7.1), and excellent durability (1000 stretching-releasing cycles). It could detect human movements, touch, physiology (temperature and sweat), pH changes, and organic solvents. Besides, the hydrogel sensors displayed great biocompatibility. Therefore, this work extends the design and preparation of highly stretchable and multifunctional hydrogels to facilitate the applications of skin-friendly wearable sensors.Graphical abstract

materials science, multidisciplinary
Polyvinyl alcohol/PEDOT:PSS with Fe3+/amylopectin enabled highly tough, anti-freezing and healable hydrogels for multifunctional wearable sensors

Shuang Zhou,Zheng Zhang,Wei Zhong,Aiyun Meng,Yaorong Su

DOI: https://doi.org/10.1016/j.talanta.2024.126592

IF: 6.1

2024-11-01

Talanta

Abstract:In recent years, hydrogel-based flexible sensors have garnered increasing attention in research. Ionic hydrogels, enriched with large amounts of ionic liquids, exhibit electrical conductivity, excellent electrochemical stability, anti-freezing, and antimicrobial properties. However, most ionic hydrogels suffer from poor mechanical properties, limiting their adaptability to more complex application scenarios. Integrating conductive polymers into hydrogels leads to desirable features such as increased specific surface area, soft and biocompatible interfaces, and high electrolyte permeability. In this study, we successfully prepared Fe3+/Ap@PVA/PEDOT double-network hydrogel. Utilizing polyvinyl alcohol (PVA) as the primary matrix, we introduced PEDOT:PSS and FeCl3 to confer conductivity to the hydrogel. The incorporation of amylopectin (Ap) further enhanced mechanical performance. The resulted hydrogel sensor exhibits outstanding mechanical properties, allowing for stretching up to 347 % and withstanding a tensile force of 505 kPa. In addition, it exhibits excellent antifreeze properties (can work at -30 °C), healability, water retention, and high sensitivity to stretching (GF = 4.72 at a 200 % strain ratio), compression (GF = 2.97 at a 12 % compressive ratio), and temperature (TCR = 2.46). These remarkable properties of the hydrogel make it possible in applications such as human motion monitoring, handwriting recognition, and temperature sensing.
Ultrahigh-strength PVA–SNF@TA hydrogel with multifunctionality applied as strain and pressure sensor

Qian Qian,Shuxiang Bao,Juan Xia,Wangyang Lu,Nan Li

DOI: https://doi.org/10.1007/s00339-023-06634-w

2023-05-05

Applied Physics A: Materials Science and Processing

Abstract:Conductive hydrogel flexible sensors have attracted widespread attention in the field of wearable electronic devices, which typically possess the properties of stretch resistance, moisture retention, antifreeze, adhesion, and self-healing. Herein, a silk nanofiber–tannic acid (SNF@TA) is successfully introduced into a polyvinyl alcohol (PVA) hydrogel to prepare a rigid and adhesive PVA–SNF@TA organohydrogel, exhibiting good mechanical strength (up to 365 kPa) and excellent self-healing properties. Due to the presence of conductive ions and ethylene glycol, the PVA–SNF@TA organohydrogel presents high sensitivity and cold resistance (− 18 °C). Moreover, the PVA–SNF@TA organohydrogel maintains a good transparency of 91% and ultraviolet filtration capacity. A strain sensor made of PVA–SNF@TA organohydrogel has good adhesion and accurate sensing signals. Generally, the designed sensor can significantly monitor small deformations, such as frowning, blinking, smiling, and swallowing motions, showing an impressive sensitivity (gauge factor 1.094) and stable (1000 stretching cycles) variable sensing characteristics. More specifically, a pressure sensor consisted of a PVA–SNF@TA organohydrogel cylinder keeps good sensing stability, thereby desirably detecting different large movements of the human body (finger pressing, walking and running). Our work can offer a broad avenue for the advanced architecture of functional hydrogel materials, which has great potential in the field of human exercise and health monitoring.
Fabrication of versatile polyvinyl alcohol and carboxymethyl cellulose-based hydrogels for information hiding and flexible sensors: Heat-induced adjustable stiffness and transparency

Yuanna Sun,Fenling Shi,Ruobing Tian,Xiaoliang Zhao,Qingshan Li,Chen Song,Ying Du,Xinhai He,Jun Fu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.126950

IF: 8.2

2023-09-22

International Journal of Biological Macromolecules

Abstract:With the growing demand for wearable electronics, designing biocompatible hydrogels that combine self-repairability, wide operating temperature and precise sensing ability offers a promising scheme. Herein, by interpenetrating naturally derived carboxymethyl cellulose (CMC) into a polyvinyl alcohol (PVA) gel matrix, a novel hydrogel is successfully developed via simple coordination with calcium chloride (CaCl 2 ). The chelation of CMC and Ca 2+ is applied as a second crosslinking mechanism to stabilize the hydrogel at relatively high temperature (95 °C). In particular, it has unique heat-induced healing behavior and unexpected tunable stiffness & transparency. Like the sea cucumber, the gel can transform between a stiffened state and a relaxed state (nearly 23 times modulated stiffness from 453 to 20 kPa) which originates from the reconstruction of the crystallites. The adjustable transparency enables the hydrogel to become an excellent information hiding material. Due to the presence of Ca 2+ , the hydrogels show favorable conductivity, anti-freezing and long-term stability. Based on the advantages, a self-powered sensor, where chemical energy is converted to electrical energy, is assembled for human motion detection. The low-cost, environmentally friendly strategy, at the same time, complies to the "green" chemistry concept with the full employment of the biopolymers. Therefore, the proposed hydrogel is deemed to find potential use in wearable sensors.

polymer science,biochemistry & molecular biology,chemistry, applied
Robust hydrogel sensor with good mechanical properties, conductivity, anti-swelling ability, water tolerance and biocompatibility

Airong Xu,Tiantian Sun,Rukuan Liu,Liuzemu Li,Yiming Gong,Zhihong Xiao

DOI: https://doi.org/10.1039/d3gc04487d

IF: 9.8

2024-02-27

Green Chemistry

Abstract:Versatile PVA/SG (polyvinyl alcohol/sodium glycinate) hydrogel sensors have been successfully developed using SG and PVA as cost-efficient and biocompatible starting materials. The mechanical properties significantly increase with increasing F–T (freezing–thawing) times and SG content in the PVA/SG hydrogel. The strengthened mechanical properties mainly result from the abundant hydrogen bond interactions of PVA with SG and the enhanced hydrogen bond crosslinking density endowed by F–T cycles and increased SG content. Moreover, the PVA/SG hydrogel shows excellent electrical conductivity (4.85 S m −1 ), realizing the excellent combination of high mechanical properties and electrical conductivity. Interestingly, as well as wonderful cytocompatibility, the hydrogel displays excellent swelling resistance and water tolerance, and the mechanical properties remain almost unchanged after immersion in water for 6 months. Most importantly, the hydrogel has high strain sensitivity with a gauge factor of 1.76, stable signal repetition monitoring, very good elasticity, fatigue resistance and recovery, and thus can be assembled into flexible sensors to monitor bending changes in human Knuckles, wrists and knees, and also be used to simulate manual control of a mobile phone screen for writing text. This study provides valuable information for the design and construction of wearable hydrogel sensors with high performance for practical applications.

chemistry, multidisciplinary,green & sustainable science & technology
Tough, Self-Adhesive, Antibacterial, and Recyclable Supramolecular Double Network Flexible Hydrogel Sensor Based on PVA/Chitosan/Cyclodextrin

Xin Fan,Li Zhao,Qiangjun Ling,Haibin Gu

DOI: https://doi.org/10.1021/acs.iecr.1c04997

2022-03-02

Abstract:Hydrogel-based flexible sensors have attracted extensive attention of researchers due to their great application potential in soft robots, electronic skin, motion monitoring, and disease diagnosis. However, it is still a challenge for hydrogel-based flexible sensors to be integrated with good mechanical performance, sensitivity, self-adhesion, fatigue resistance, antibacterial activity, and recyclability. Here, a novel supramolecular polyoxymethylene cross-linking agent (PCD-Fc-CHO) was designed and synthesized by the host–guest interaction between poly(β-cyclodextrin) and ferrocene. Then, a double network (DN) hydrogel was prepared by a PVA crystallization domain via the freeze-thaw cycle method (first network) and Schiff base between PCD-Fc-CHO and chitosan (second network). The obtained DN hydrogel was immersed in the NaCl solution to form a conductive DN hydrogel. The resulting hydrogel has excellent mechanical properties [tensile (314%, 0.5 MPa), compress (50%, 0.663 MPa)], good fatigue resistance (stretching and compressing cycles at least five times), reliable conductivity (2.48 S/m), high sensitivity [gauge factor (GF) = 4.87], antibacterial, and recyclable properties. In addition, an industrially produced and low-cost plant polyphenol, black wattle tannin, was used for the first time to give the hydrogel good adhesion and repeated adhesion (at least ten times). The obtained hydrogel can be used as a flexible strain sensor to monitor both large movements (bending finger, wrist, elbow, arm, and knee) and micromovements (talking, smiling, blinking, blowing, frowning, and drinking) with high sensitivity and stability. It is noteworthy that the reshaped hydrogel also exhibits sensitive sensing performance, indicating that the hydrogel can be recycled. This work expanded the strategy for the design and preparation of multi-functional DN hydrogels and promoted the application of wearable, highly sensitive, fatigue resistance, antibacterial, and green hydrogel sensors.

engineering, chemical
Highly stretchable, self-healable and adhesive, thermal responsive conductive hydrogel loading nanocellulose complex for a flexible sensor

Cheng Chen,Jiajun Wang,Ziqi Xu,Naipin Chen,Fang Wang

DOI: https://doi.org/10.1016/j.ijbiomac.2023.125595

IF: 8.2

2023-08-01

International Journal of Biological Macromolecules

Abstract:Currently, with the widespread concerns of smart soft sensors in wearable electronics, human health detection and electronic skin, flexible conductive hydrogels have been extensively studied. However, it remains a great challenge to develop hydrogels that have both satisfactory mechanical performance with stretchable and compressible and high conductive. Herein, based on synergistic dynamic hydrogen and metal coordination bonds, polyvinyl alcohol (PVA)/poly (2-hydroxyethyl methacrylate) (PHEMA) hydrogels doped with polypyrrole decorated cellulose nanofibers (CNFs@PPy) are developed via free radical polymerization. The loading versatile CNFs@PPy highlighted the complex hydrogels super-stretchability (approximately 2600 % elongation) and excellent toughness (2.74 MJ/m3) properties to tensile deformation, strong compressive strength (1.96 MPa), fast temperature responsiveness and outstanding strain sensing capability (GF = 3.13). Moreover, the PHEMA/PVA/CNFs@PPy hydrogels possessed rapid self-healing and powerful adhesive abilities to various interfaces without extra assistance, as well as distinguished fatigue resistance performance. Such advantages make the nanocomposite hydrogel displayed high stability and repeatable to both pressure and strain in a wide range of deformations, enabling a promising candidate in the fields of motion monitoring and healthcare management.

polymer science,biochemistry & molecular biology,chemistry, applied
High tensile poly(vinyl alcohol)/Carboxymethyl cellulose sodium/Polyacrylamide/Borax dual network hydrogel for lifting heavy weight and multi-functional sensors

Yizhe Xu,Shuang Sun,Xieraili Maimaitiyiming

DOI: https://doi.org/10.1007/s10570-023-05548-3

IF: 6.123

2023-11-21

Cellulose

Abstract:In recent years, flexible wearable devices have become one of the most popular research topics due to their good elasticity and high sensitivity. However, traditional flexible sensors have poor mechanical performance and fatigue resistance, leading to the sensor being easily damaged. In this work, a dual-network interpenetrating structure was designed by mixing polyvinyl alcohol (PVA) and polyacrylamide (PAM) to form hydrogen bonds, which greatly improved the mechanical properties of the flexible sensors. In addition, the addition of Carboxymethyl cellulose sodium (CMC) and borax can make the mechanical properties of double network polymer hydrogel stronger, improving the tear resistance and adhesion. After testing, the PVA/CMC/PAM/Borax hydrogel has high stress (1.4 MPa), high break elongation (792%), great toughness (4.67 MJ/m 3 ). Hydrogel sensors can be used not only for human motion detection, but also for temperature and humidity detection. In summary, PVA/CMC/PAM/Borax hydrogel is expected to be a new flexible wearable device with great potential in the field of flexible wearables.

materials science, textiles,polymer science, paper & wood
Poly(vinyl alcohol)/polyacrylamide double‐network ionic conductive hydrogel strain sensor with high sensitivity and high elongation at break

Zijian Wu,Xiaorui Liu,Qi Xu,Liying Zhang,Safaa N. Abdou,Mohamed M. Ibrahim,Jing Zhang,Zeinhom M. El‐Bahy,Ning Guo,Junguo Gao,Ling Weng,Zhanhu Guo

DOI: https://doi.org/10.1002/pol.20240209

IF: 3.046

2024-07-21

Journal of Polymer Science

Abstract:As a soft material with biocompatibility and stimulation response, ionic conductive hydrogel‐based wearable strain sensors show great potential across a wide spectrum of engineering disciplines, but their mechanical toughness is limited in practical applications. In this study, freeze‐thawing techniques were utilized to fabricate double‐network hydrogels of poly(vinyl alcohol)/polyacrylamide (PVA/PAM) with both covalent and physical cross‐linking networks. These double‐network hydrogels demonstrate excellent mechanical performance, with an elongation at break of 2253% and tensile strength of 268.2 kPa. Simultaneously, they also display a high sensitivity (Gage factor, GF = 2.32 at 0%–200% strain), achieve a rapid response time of 368 ms without the addition of extra conductive fillers or ions, stable signal transmission even after multiple cycles, and fast response to human motion detection.

polymer science
High Tensile, Antibacterial, and Conductive Hydrogel Sensor with Multiple Cross-Linked Networks Based on PVA/Sodium Alginate/Zinc Oxide

Yafei Qin,Erjiong Wei,Chenkai Cui,Jiegao Xie

DOI: https://doi.org/10.1021/acsomega.4c01860

IF: 4.1

2024-03-26

ACS Omega

Abstract:Hydrogel sensors have attracted a lot of attention due to their great significance for biosensors and human detection, especially their antibacterial properties when in direct contact with the human body. However, it is challenging to improve mechanical and antibacterial performance simultaneously. In this study, by using ultrasonic dispersion technology to attach zinc oxide to cellulose and adding sodium alginate, a multiple cross-linking network is generated, which effectively solves this problem. The proposed poly(vinyl alcohol)/sodium alginate/zinc oxide/hydrogel sensor exhibits not only excellent biocompatibility but also high tensile properties (strain above 2000%). Besides, the sensor also has an antibacterial function (against Escherichia coli and Staphylococcus aureus). The hydrogel acts as a strain sensor and biosensor; it can also be used as a human health detection sensor; its high tensile properties can detect large tensile deformation and small changes in force, such as finger bending, knee bending, and other joint movements, and can also be used as a sound detection sensor to detect speech and breathing. This study provides a simple method to prepare hydrogel sensors that can be useful for human health detection and biosensor development.

chemistry, multidisciplinary
Triple physical cross-linking cellulose nanofibers-based poly(ionic liquid) hydrogel as wearable multifunctional sensors

Dong Fu,Yang Xie,Lili Zhou,Lili Zhang,Ting Zheng,Jun Shen

DOI: https://doi.org/10.1016/j.carbpol.2023.121572

2024-02-01

Abstract:A novel triple physical cross-linking poly(ionic liquid) hydrogel, composed of poly(acrylamide-co-dodecyl methacrylate-co-1-vinyl-3-methyluracil-imidazolium chloride)/cellulose nanofibers-Ca2+ (PADV/CNFs-Ca2+), was synthesized through micellar-copolymerization followed by a solvent-soaked procedure. The synergistic interactions in polymer network (i.e. the hydrophobic association of dodecyl methacrylate moiety in surfactant micelles, the hydrogen bondings between imidazolium monomer segments and other monomer segments in polymers, and the ionic coordination between Ca2+ and -COO- on cellulose nanofibers surface) endowed the hydrogel with excellent mechanical properties, including high strength (754 kPa of tensile strength and 1905 kPa of compressive strength), outstanding stretchability (1963 %), elastic modulus (56.5 kPa) and remarkable mechanical durability (200 cycles with 500 % deformations and 100 cycles at 50 % compression strain). Besides, this hydrogel exhibited other advantages, such as satisfied conductivity (28.7 mS/cm), high strain/pressure/temperature-sensitive behavior, precise and stable signal transmission, varying degrees of antibacterial activity, and biocompatibility. Owing to the exceptional comprehensive performance, the hydrogel was then assembled as a multifunctional sensor to monitor the joint motion, vocal cord vibration, tactile sensation and body temperature with remarkable sensitivity in real time. This work offered a new strategy for the fabrication of durable, biocompatible, antibacterial and conductive materials for wearable multifunctional electronic devices.
Highly stretchable polyvinyl alcohol composite conductive hydrogel sensors reinforced by cellulose nanofibrils and liquid metal for information transmission

Tianyi Hang,Yiming Chen,Fuqiang Yin,Jiahui Shen,Xiping Li,Zhaochun Li,Jiajia Zheng

DOI: https://doi.org/10.1016/j.ijbiomac.2023.128855

IF: 8.2

2023-12-21

International Journal of Biological Macromolecules

Abstract:Conductive hydrogels have received widespread attention in the field of flexible sensors. However, a single network structure inside the hydrogel sensor usually makes it difficult to bear larger mechanical loadings, greatly limiting practical applications. Developing a recoverable conductive hydrogel sensor with high toughness and adaptability is still challenging. Herein, a high-performance polyvinyl alcohol (PVA)-based conductive composite hydrogel was constructed, assisted by green cellulose nanofibrils (CNFs), magnesium chloride (MgCl 2 ), ethylene glycol (EG), and liquid metal (LM). The synergistic effects between CNFs and LM enhanced the network structure inside the recoverable hydrogel. This resulted in an excellent tensile strength of 3.86 MPa with an elongation at break of as high as 918.4 % and compressive strength of 4.04 MPa at 80 % strain. In addition, the conductive network composed of MgCl 2 and LM endowed the hydrogel good electrical conductivity. Moreover, it could be used as a flexible strain sensor for various application scenarios, e.g. , micro-stress monitoring (water droplet falling) and information encryption transmission of Morse code. Such uniqueness will provide a design strategy for developing a new generation of hydrogel sensors.

polymer science,biochemistry & molecular biology,chemistry, applied
A Multifunctional, Self-Healing, Self-Adhesive, and Conductive Sodium Alginate/Poly(vinyl alcohol) Composite Hydrogel as a Flexible Strain Sensor.

Xiong Liu,Haibin Gu,Li Zhao,Zhijun Ren,Qiangjun Ling,Zhengjun Li

DOI: https://doi.org/10.1021/acsami.1c01343

2021-02-23

Abstract:Hydrogel-based wearable devices have attracted tremendous interest due to their potential applications in electronic skins, soft robotics, and sensors. However, it is still a challenge for hydrogel-based wearable devices to be integrated with high conductivity, a self-healing ability, remoldability, self-adhesiveness, good mechanical strength and high stretchability, good biocompatibility, and stimulus-responsiveness. Herein, multifunctional conductive composite hydrogels were fabricated by a simple one-pot method based on poly(vinyl alcohol) (PVA), sodium alginate (SA), and tannic acid (TA) using borax as a cross-linker. The composite hydrogel network was built by borate ester bonds and hydrogen bonds. The obtained hydrogel exhibited pH- and sugar-responsiveness, high stretchability (780% strain), and fast self-healing performance with healing efficiency (HE) as high as 93.56% without any external stimulus. Additionally, the hydrogel displayed considerable conductive behavior and stable changes of resistance with high sensitivity (gauge factor (GF) = 15.98 at a strain of 780%). The hydrogel was further applied as a strain sensor for monitoring large and tiny human motions with durable stability. Significantly, the healed hydrogel also showed good sensing behavior. This work broadens the avenue for the design and preparation of biocompatible polymer-based hydrogels to promote the application of hydrogel sensors with comfortable wearing feel and high sensitivity.

Engineering,Medicine,Materials Science
Highly conductive hydrogel sensor driven by amylose with freezing and dehydration resistance

Yiyan Gao,Yang Gao,Zhixin Zhang,Xiuyan Ren,Fei Jia,Guanghui Gao,Yuan-Rui Wang

DOI: https://doi.org/10.1039/d2tc02205b

IF: 6.4

2022-08-09

Journal of Materials Chemistry C

Abstract:Conductive hydrogels are ideal materials for preparing wearable strain sensing devices due to their flexibility and stretchability. However, most hydrogels exhibited poor freezing resistance and weak water-holding ability, thus hindering the working range of hydrogel-based sensors in extreme environments. Here, a conductive hydrogel featuring conspicuous anti-freezing and water retention abilities was prepared by integrating amylose (AMY) into polyvinyl alcohol (PVA)/glycerol/NaCl hydrogel. AMY possessed amounts of hydroxyl groups, which could interact with PVA and glycerin via hydrogen bonds, enhancing the toughness of the hydrogel. Meanwhile, based on the strong hydrogen bonding between glycerol and water molecules, the hydrogel displayed water-retaining property after 7 days of storage in an open environment. The synergistic action of NaCl and glycerol prevented the crystallization of the water at low temperatures, endowing the hydrogel with outstanding conductivity and stretchability at -20 °C. Furthermore, the hydrogel-based wearable strain sensor exhibited excellent sensitivity (GF=2.55), fast response/recovery time, good durability and biocompatibility, which accurately detected joint movements and physiological signals at room temperature or under extreme conditions. Therefore, the conductive hydrogels would possess significant application prospects in health detection, disease diagnosis, and artificial intelligence.

materials science, multidisciplinary,physics, applied
Natural polymers-enhanced double-network hydrogel as wearable flexible sensor with high mechanical strength and strain sensitivity

Zhijie Zhao,Xiao Fan,Shuoxuan Wang,Xiaoning Jin,Junjie Li,Yuping Wei,Yong Wang

DOI: https://doi.org/10.1016/j.cclet.2022.107892

IF: 9.1

2023-06-01

Chinese Chemical Letters

Abstract:Conductive hydrogels have shown great prospects as wearable flexible sensors. Nevertheless, it is still a challenge to construct hydrogel-based sensor with great mechanical strength and high strain sensitivity. Herein, an ion-conducting hydrogel was fabricated by introducing gelatin-dialdehyde β-cyclodextrin (Gel-DACD) into polyvinyl alcohol-borax (PVA-borax) hydrogel network. Natural Gel-DACD network acted as mechanical deformation force through non-covalent cross-linking to endow the polyvinyl alcohol-borax/gelatin-dialdehyde β-cyclodextrin hydrogel (PGBCDH) with excellent mechanical stress (1.35 MPa), stretchability (400%), toughness (1.84 MJ/m3) and great fatigue resistance (200% strain for 100 cycles). Surprisingly, PGBCDH displayed good conductivity of 0.31 S/m after adding DACD to hydrogel network. As sensor, it showed rapid response (168 ms), high strain sensitivity (gage factor (GF) = 8.57 in the strain range of 200%-250%) and reliable sensing stability (100% strain for 200 cycles). Importantly, PGBCDH-based sensor can accurately monitor complex body movements (knee, elbow, wrist and finger joints) and large-scale subtle movements (speech, swallow, breath and facial expressions). Thus, PGBCDH shows great potential for human monitoring with high precision.

chemistry, multidisciplinary
Design, characterization, and performance evaluation of novel PVA/CS/CNF/MOP TN ionic conductive hydrogels for flexible sensors

Wenjun Xu,All Amin Newton,Zhuoming Chen,Binjie Xin,Md All Amin Newton

DOI: https://doi.org/10.1002/pol.20240043

IF: 3.046

2024-04-03

Journal of Polymer Science

Abstract:Flexible hydrogel polymers with excellent stretchability, high conductivity, and biocompatibility are widely used to prepare flexible sensing devices. However, it remains difficult to simultaneously combine excellent tensile capacity and high ion conducting ability into a simple hydrogel material. While PVA‐based hydrogels have been developed before, this work focuses on a unique preparation method. It solves the engineering problem of making hydrogels that have both high elongation at break and high ionic conductivity. In the study, we introduced cellulose nanofibers (CNFs) into polyvinyl alcohol (PVA)/chitosan (CS) cross‐linked polymer networks to form triple network (TN) composite hydrogel. The labyrinthine three‐dimensional (3D) honeycomb through‐hole network nanostructure generated by the addition of CNF provides the hydrogel with excellent mechanical properties. Then, the simple salting‐out strategy of muriate of potash (MOP) solution gives the hydrogel superior mechanical properties and high ionic conductivity. The prepared PVA/CS/CNF/MOP TN ionic conductive hydrogel not only exhibits excellent mechanical properties (toughness up to 2.39 MJ m−3, fracture strength up to 1.78 MPa, fracture strain up to 350%) but also has impressive ionic conductivity (highest to 8.4 S m−1). The flexible hydrogel strain sensor assembled from the PVA/CS/CNF/MOP TN ionic conductive hydrogel showed remarkable sensitivity (gauge factor for 6.9) and the ability to detect human motions reliably. Besides, the hydrogel also has maintained long‐term antimicrobial and antioxidant properties. The study provided a new perspective on designing multifunctional materials featuring strong mechanical properties and high ionic conductivity, contributing to the advancement of flexible sensor technologies.

polymer science
Multi-physics coupling reinforced polyvinyl alcohol/cellulose nanofibrils based multifunctional hydrogel sensor for human motion monitoring

Jianquan Hu,Kai Li,Liangliang An,Dayong Ding,Sheng Chen,Zhong Liu,Yuxin Liu,Feng Xu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.123841

2023-04-30

Abstract:Ionic conductive hydrogels have been widely used for sensor, energy storage and human-machine interface. To address the problems of the traditional ionic conductive hydrogels fabricated with the soaking method, such as the lack of frost resistance, poor mechanical properties, time-consuming and chemical-wasting, herein, a multi-physics crosslinking reinforced strong, anti-freezing and ionic conductive hydrogel sensor is fabricated utilizing the tannin acid-Fe2(SO4)3 through the simple one-pot freezing-thawing process at low electrolyte concentration. The results show that the P10C0.4T8-Fe2(SO4)3 (PVA10%CNF0.4%TA8%-Fe2(SO4)3) displayed better mechanical property and ionic conductivity due to hydrogen bonding and coordination interaction. The tensile stress reaches up to 0.980 MPa (570 % strain). Moreover, the hydrogel presents excellent ionic conductivity (0.220 S⋅m-1 at room temperature), anti-freezing performance (0.183 S⋅m-1 at -18 °C), large gauge factor (1.75), excellent sensing stability, repeatability, durability and reliability. This work paves a way for preparing mechanical strong and anti-freezing hydrogel based on multi-physics crosslinking with one-pot freezing-thawing process.
Anti-freezing, Resilient and Tough Hydrogels for Sensitive and Large-Range Strain and Pressure Sensors

Yanyu Yang,Yatian Yang,Yanxia Cao,Xing Wang,Yourong Chen,Hongyan Liu,Yafei Gao,Jianfeng Wang,Chao Liu,Wanjie Wang,Jia-Kuo Yu,Decheng Wu

DOI: https://doi.org/10.1016/j.cej.2020.126431

IF: 15.1

2020-01-01

Chemical Engineering Journal

Abstract:Hydrogel sensors are peculiarly attractive in flexible wearable electronics due to the stretchability and strain-responsive ability. However, flexible sensors (e.g. electronic skin) in practice require to perceive both strain and pressure concurrently and repeatedly, which put forward an imperative demand for multi-model and durable hydrogel sensors. Additionally, freezing intolerance is also an urgent problem to be addressed for low-temperature applications of hydrogel sensors. Herein, we constructed a wearable multi-model hydrogel sensor featuring with sensitive and large-range strain and pressure detection capacity, together with long-term stability and wide operating temperature range, based on a resilient, anti-fatigue and freezing-tolerant chitosan-poly (hydroxyethyl acrylamide) double-network (CS-PHEAA DN) hydrogel, which was fabricated via post-cross-linking CS-PHEAA composite hydrogel into Na(3)Cit solution. The ions simultaneously furnished the hydrogel with superior mechanics (stretchability, supercompressibility, excellent resilience and remarkable fatigue resistance), prominent ionic conductivity and low temperature tolerance. Impressively, the assembled hydrogel sensor exhibited preeminent sensitivity and cycling stability on detecting multi-type and large-range deformation (elongation, compression and bend), pressure and various human motions even at low temperatures. Remarkably, the fabricated hydrogel/aluminum hybrid combination serving as a flexible sensor maintained mechanical advantages, sensitive sensing capacity and good durability within a wide temperature range. This work provides a feasible method to construct anti-freezing, durable and multi-mode hydrogel sensors with high sensitivity and large-range detection capacity and paves a way for versatile applications in electronic skin, human-motion detection and intelligence device.
Polyvinyl alcohol/chitosan based nanocomposite organohydrogel flexible wearable strain sensors for sports monitoring and underwater communication rescue

Zhenchun Li,Peng Liu,Shaowei Chen,Bingzhen Wang,Shiyuan Liu,Enyuan Cui,Feihong Li,Yunwu Yu,Wenhao Pan,Ning Tang,Yaxin Gu

DOI: https://doi.org/10.1016/j.ijbiomac.2023.129054

IF: 8.2

2023-12-01

International Journal of Biological Macromolecules

Abstract:Hydrogel-based flexible wearable sensors have garnered significant attention in recent years. However, the use of hydrogel, a biomaterial known for its high toughness, environmental friendliness, and frost resistance, poses a considerable challenge. In this study, we propose a stepwise construction and multiple non-covalent interaction matching strategy to successfully prepare dynamically physically crosslinked multifunctional conductive hydrogels. These hydrogels self-assembled to form a rigid crosslinked network through intermolecular hydrogen bonding and metal ion coordination chelation. Furthermore, the freeze-thawing process promoted the formation of poly(vinyl alcohol) microcrystalline domains within the amorphous hydrogel network system, resulting in exceptional mechanical properties, including a tensile strength (2.09 ± 0.01 MPa) and elongation at break of 562 ± 12 %. It can lift 10,000 times its own weight. Additionally, these hydrogels exhibit excellent resistance to swelling and maintain good toughness even at temperatures as low as -60 °C. As a wearable strain sensor with remarkable sensing ability (GF = 1.46), it can be effectively utilized in water and underwater environments. Moreover, it demonstrates excellent antimicrobial properties against Escherichia coli (Gram-negative bacteria). Leveraging its impressive sensing ability, we combine signal recognition with a deep learning model by incorporating Morse code for encryption and decryption, enabling information transmission.

polymer science,biochemistry & molecular biology,chemistry, applied

Mort Levin and the emergence of chronic disease epidemiology.

Stretchable, compressible, and conductive hydrogel for sensitive wearable soft sensors

Biocompatible polysaccharide ionic hydrogel as ultra-stretchable and multifunctional wearable sensor

Polyvinyl alcohol/PEDOT:PSS with Fe3+/amylopectin enabled highly tough, anti-freezing and healable hydrogels for multifunctional wearable sensors

Ultrahigh-strength PVA–SNF@TA hydrogel with multifunctionality applied as strain and pressure sensor

Fabrication of versatile polyvinyl alcohol and carboxymethyl cellulose-based hydrogels for information hiding and flexible sensors: Heat-induced adjustable stiffness and transparency

Robust hydrogel sensor with good mechanical properties, conductivity, anti-swelling ability, water tolerance and biocompatibility

Tough, Self-Adhesive, Antibacterial, and Recyclable Supramolecular Double Network Flexible Hydrogel Sensor Based on PVA/Chitosan/Cyclodextrin

Highly stretchable, self-healable and adhesive, thermal responsive conductive hydrogel loading nanocellulose complex for a flexible sensor

High tensile poly(vinyl alcohol)/Carboxymethyl cellulose sodium/Polyacrylamide/Borax dual network hydrogel for lifting heavy weight and multi-functional sensors

Poly(vinyl alcohol)/polyacrylamide double‐network ionic conductive hydrogel strain sensor with high sensitivity and high elongation at break

High Tensile, Antibacterial, and Conductive Hydrogel Sensor with Multiple Cross-Linked Networks Based on PVA/Sodium Alginate/Zinc Oxide

Triple physical cross-linking cellulose nanofibers-based poly(ionic liquid) hydrogel as wearable multifunctional sensors

Highly stretchable polyvinyl alcohol composite conductive hydrogel sensors reinforced by cellulose nanofibrils and liquid metal for information transmission

A Multifunctional, Self-Healing, Self-Adhesive, and Conductive Sodium Alginate/Poly(vinyl alcohol) Composite Hydrogel as a Flexible Strain Sensor.

Highly conductive hydrogel sensor driven by amylose with freezing and dehydration resistance

Natural polymers-enhanced double-network hydrogel as wearable flexible sensor with high mechanical strength and strain sensitivity

Design, characterization, and performance evaluation of novel PVA/CS/CNF/MOP TN ionic conductive hydrogels for flexible sensors

Multi-physics coupling reinforced polyvinyl alcohol/cellulose nanofibrils based multifunctional hydrogel sensor for human motion monitoring

Anti-freezing, Resilient and Tough Hydrogels for Sensitive and Large-Range Strain and Pressure Sensors

Polyvinyl alcohol/chitosan based nanocomposite organohydrogel flexible wearable strain sensors for sports monitoring and underwater communication rescue