Abstract:Additive manufacturing has been well established in many sectors, including the medical industry. For load-bearing bone implants, titanium and its alloys, such as Ti6Al4V, are widely used due to their high strength to weight ratio and osseointegrative properties. However, bone resorption and loosening of implants is related to the significantly higher stiffness of dense Ti6Al4V, leading to stress shielding. With the aging of population, there is an increasing need for orthopedic implants with a high success rate and a long implant life span. Besides that the treatment of non-healing segmental bone defects, where the self-repairing properties of bone tissue are not sufficient, is still a challenge. In both fields of application, patient-specific titanium implants combined with functionally graded porosity designed according to locally expected loads unlock new possibilities. Many studies underline the huge potential of the new design freedom to generate open porous structures and more personalized implants with enhanced mechanical properties that also integrate well with surrounding tissues. Integration of functionally graded open porosity into implants allows for the implant to more closely mimic the mechanical properties of human bone and its internal architecture. The results of this work represent the basis for developing complex porous titanium structures with various pore sizes and shapes to tailor structural mechanical properties and biological responses. Therefore, 3D porous structures with various pore sizes and shapes were designed and manufactured in Ti6Al4V using laser powder bed fusion (PBF-LB/M). Based on these structures, the correlation of pore size and shape with cell ingrowth, morphology, metabolic activity, and early markers for bone formation (ALP activity) was investigated in static cell cultures using the osteosarcoma cell line Saos-2. Mechanical properties, such as stiffness and compression strength, were investigated with compression testing. The present study concludes that cell morphology, metabolic activity, and ALP activity are widely independent of pore shape and size within the tested range of 400–700 μm pore size. Furthermore, the mechanical properties of the evaluated structures were in the range of cortical and trabecular bone. This opens the possibility to design mechanical properties with gradient porosity without decisively affecting biological responses.

Ti6Al4V Implants with Dense-Trabecular Bilayer Morphology for Bone Ingrowth: Synergy of Green Net Shaping and Sacrificial Templating

Bionic mechanical design and 3D printing of novel porous Ti6Al4V implants for biomedical applications

Ti6Al4V biomimetic scaffolds for bone tissue engineering: Fabrication, biomechanics and osseointegration

Ti6Al4V biomimetic scaffolds for bone tissue engineering:Fabrication, biomechanics and osseointegration

Design and Manufacturing of a Novel Trabecular Tibial Implant

Fabrication and in Vivo Evaluation of Ti6Al4V Implants with Controlled Porous Structure and Complex Shape

Properties of Additive-Manufactured Open Porous Titanium Structures for Patient-Specific Load-Bearing Implants

Porous tantalum structure integrated on Ti6Al4V base by Laser Powder Bed Fusion for enhanced bony-ingrowth implants: In vitro and in vivo validation

A novel methodology for developing dense and porous implants on single generic optimized setting for excellent bio-mechanical characteristics

Application of laser engineered net shaping (LENS) to manufacture porous and functionally graded structures for load bearing implants

Biomimetic design strategy of complex porous structure based on 3D printing Ti-6Al-4V scaffolds for enhanced osseointegration

Trabecular-like Ti-6Al-4V Scaffolds for Orthopedic: Fabrication by Selective Laser Melting and in Vitro Biocompatibility

Novel adaptive finite element algorithms to predict bone ingrowth in additive manufactured porous implants

Low elastic modulus and highly porous triply periodic minimal surfaces architectured implant for orthopedic applications

Osseointegration of functionally graded Ti6Al4V porous implants: Histology of the pore network

3D-ink-extruded titanium scaffolds with porous struts and bioactive supramolecular polymers for orthopedic implants

3D Printing and Surface Engineering of Ti6Al4V Scaffolds for Enhanced Osseointegration in an In Vitro Study

Fabrication and compressive properties of Ti6Al4V implant with honeycomb-like structure for biomedical applications

3D Printing of Ti-6Al-4V-Based Porous-Channel Dental Implants: Computational, Biomechanical, and Cytocompatibility Analyses

The biomimetic design and 3D printing of customized mechanical properties porous Ti6Al4V scaffold for load-bearing bone reconstruction

Topography‐Supported Nanoarchitectonics of Hybrid Scaffold for Systematically Modulated Bone Regeneration and Remodeling