[Eye diseases caused by Leptospira canicola].

V. Rezek,J. Vosta

1957-06-01

Abstract:

What problem does this paper attempt to address?

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Mengru Li,Debin Xia,Aifeng Jiang,Xi Du,Xiao Fan,Lele Qiu,Ping Wang,Ruiqing Fan,Yulin Yang

DOI: https://doi.org/10.1002/ente.201900027

IF: 4.149

2019-01-01

Energy Technology

Abstract:Perovskite crystallization and morphology are two essential factors to the photoelectric performances of perovskite solar cells (PSCs). A 3D metal-organic assembly [In-2(phen)(3)Cl-6]CH(3)CN2H(2)O (In2) is introduced for the first time into lead iodide precursor to modify the quality of a perovskite thin film through a two-step sequential deposition method. As a result, both the lead iodide and perovskite exhibit improved crystallization and modified morphology. The optimized film presents less trap states and is thus in favor of the charge transfer as well as charge collection. Consequently, open circuit voltage (V-oc) and fill factor obviously show enhancements from 0.99 to 1.04V and from 0.66 to 0.71, respectively, yielding a significant increase in a power conversion efficiency from 15.41% to 17.15%. Meanwhile, the hydrophobic property of In2 can increase the moisture resistance of the perovskite, which offers a simple and effective method to improve the stability of PSCs.
Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Tie Xu,Hongkun Cai,Xiaofang Ye,Yinbin Zhu,Jian Ni,Juan Li,Jianjun Zhang

DOI: https://doi.org/10.1063/5.0122201

2022-11-22

Abstract:Black-phase formamidinium lead iodide (FAPbI 3 ), with a narrow bandgap and high thermal stability, has emerged as an in-demand material for highly efficient perovskite solar cells (PSCs). In a two-step sequential deposition, the PbI 2 film plays an important role in the formation of a perovskite film with desirable qualities. This paper explores using N-methyl-2-pyrrolidone (NMP), a strong Lewis base, and N,N-dimethylformamide (DMF) as a mixed precursor solvent (DMF/NMP) of PbI 2 and reports on preparing PbI 2 films with a porous morphology by thermal treatment. Porous PbI 2 films ensure the diffusion and sufficient reaction of the formamidinium iodide solution to form a smooth perovskite film. In addition, a dynamic spin coating method is also introduced to improve the uniformity of the perovskite film. Both methods yield a pure α-phase FAPbI 3 film immediately in the unannealed state, which is necessary for the perovskite film to maintain phase stability. Finally, PSCs with a power conversion efficiency of 21.20% (0.13 cm 2 ) are fabricated and optimized. The unencapsulated PSCs retain 90% of the initial efficiency for 1000 hours in dry air and exhibit a good thermal stability when heated to 85 °C.

chemistry, physical,physics, atomic, molecular & chemical
Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

Tingting Niu,Lingfeng Chao,Yingdong Xia,Kaiyu Wang,Xueqin Ran,Xiao Huang,Changshun Chen,Jinpei Wang,Deli Li,Zhenhuang Su,Zhelu Hu,Xingyu Gao,Jing Zhang,Yonghua Chen

DOI: https://doi.org/10.1002/adma.202309171

IF: 29.4

2023-12-18

Advanced Materials

Abstract:Narrow bandgap cubic formamidine perovskite (α‐FAPbI3) has been widely studied for its potential to achieve record‐breaking efficiency. However, its high preparation difficulty caused by lattice instability has been criticized. A popular strategy for stabilizing the α‐FAPbI3 lattice is to replace intrinsic FA+ or I− with smaller ions of MA+, Cs+, Rb+, and Br−, whereas this generally leads to broadened optical bandgap and phase separation. Studies show that ions substitution‐free phase‐pure α‐FAPbI3 can achieve intrinsic phase stability. However, the challenging preparation of high‐quality films has hindered its further development. Here, we report a facile synthesis of high‐quality MA+, Cs+, Rb+, and Br−‐free phase‐pure α‐FAPbI3 perovskite film by a new solution modification strategy. This enables the activation of lead‐iodine (Pb‐I) frameworks by forming the coated Pb···O network, thus simultaneously promoting spontaneous homogeneous nucleation and rapid phase transition from δ to α phase. As a result, the efficient and stable phase‐pure α‐FAPbI3 PSC was obtained through a one‐step method without antisolvent treatment, with a record efficiency of 23.15% and excellent long‐term operating stability for 500 hours under continuous light stress. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α‐FAPbI 3 Phase Transition for High Efficiency Perovskite Solar Cells

Wenjian Shen,Haoyu Cai,Yingjie Kong,Wei Dong,Cong Bai,Guijie Liang,Wangnan Li,Juan Zhao,Fuzhi Huang,Yi‐Bing Cheng,Jie Zhong

DOI: https://doi.org/10.1002/smll.202302194

IF: 13.3

2023-04-28

Small

Abstract:The α-phase formamidinium lead tri-iodide (α-FAPbI3 ) has become the most promising photovoltaic absorber for perovskite solar cells (PSCs) due to its outstanding semiconductor properties and astonishing high efficiency. However, the incomplete crystallization and phase transition of α-FAPbI3 substantially undermine the performance and stability of PSCs. In this work, a series of the protic amine carboxylic acid ion liquids are introduced as the precursor additives to efficiently regulate the crystal growth and phase transition processes of α-FAPbI3 . The MA2 Pb3 I8 ·2DMSO phase is inhibited in annealing process, which remarkably optimizes the phase transition process of α-FAPbI3 . It is noted that the functional groups of carboxyl and ammonium passivate the undercoordinated lead ions, halide vacancies, and organic vacancies, eliminating the deleterious nonradiative recombination. Consequently, the small-area devices incorporated with 2% methylammonium butyrate (MAB) and 1.5% n-butylammonium formate (BAFa) in perovskite show champion efficiencies of 25.10% and 24.52%, respectively. Furthermore, the large-area modules (5 cm × 5 cm) achieve PCEs of 21.26% and 19.27% for MAB and BAFa additives, indicating the great potential for commercializing large-area PSCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Epitaxial Growth of α‐FAPbI3 at a Well‐Matched Heterointerface for Efficient Perovskite Solar Cells and Solar Modules

Yuanyuan Meng,Yulong Wang,Chang Liu,Pengyu Yan,Kexuan Sun,Yaohua Wang,Ruijia Tian,Ruikun Cao,Jintao Zhu,Hainam Do,Jianfeng Lu,Ziyi Ge

DOI: https://doi.org/10.1002/adma.202309208

IF: 29.4

2023-11-28

Advanced Materials

Abstract:Although the FAPbI3 perovskite system exhibits an impressive optoelectronic characteristic and thermal stability because of its energetically unstable black phase at room temperature, it is considerably challenging to attain a controllable and oriented nucleation of α‐FAPbI3. To overcome this challenge, a two‐dimensional (2D) perovskite with a released inorganic octahedral distortion designed by weakening the hydrogen interactions between the organic interlayer and [PbI6]4‐ octahedron is presented in this study. A highly matched heterointerface can be formed between the (002) facet of the 2D structure and the (100) crystal plane of the cubic α‐FAPbI3, thereby lowering the crystallization energy and inducing a heterogeneous nucleation of α‐FAPbI3. This "epitaxial growth" mechanism results forms the highly preferred crystallographic orientation of the (100) facets, improved crystal quality and film uniformity, substantially increased charge transporting characteristics, and suppressed nonradiative recombination losses. An impressive power conversion efficiency (PCE) of 25.4% (certified 25.2%) is achieved using target PSCs, which demonstrates outstanding ambient and operational stability. We prove the feasibility of this strategy for the scalable deposition of homogeneous and high‐quality perovskite thin films by demonstrating the remarkably increased PCE of the large‐area perovskite solar module, from 18.2% to 20.1%. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
CsPb2Br5 assisted direct crystallization of 3D perovskite phase for highly efficient and stable solar cells

Caiyun Gao,Kun Gao,Bingqian Zhang,Xiuhong Sun,Qiangqiang Zhao,Xiao Wang,Feng Wang,Mingliang Sun,Guanglei Cui,Shuping Pang,KUN GAO

DOI: https://doi.org/10.1039/d4ee00229f

IF: 32.5

2024-03-27

Energy & Environmental Science

Abstract:Improving the crystallization quality of the perovskite film is crucial for both the efficiency and stability of perovskite solar cells. However, the solid-state transition of formamidinium lead iodide perovskite thin films from the δ to α phase at high temperatures typically introduces a significant number of lattice defects, which inturn leads to increased carrier recombination rates and reduced humidity stability. Directly growing the α-phase perovskite phase from the precursor solution still remains a challenge. In this work, a low solubility, halogen rich CsPb2Br5 crystal was introduced into the perovskite solution to regulate the crystallization behavior of the perovskite layer. It was demonstrated that the CsPb2Br5 nanocrystals were pre-precipitated and induced the direct crystallization of the α-phase perovskite during the solution processing. The direct formation of the α-phase instead of the δ-phase effectively enhances the crystalline quality and reduces the defect density of the perovskite films. As a result, the corresponding device exhibits an enhanced power conversion efficiency of 25.55%, and the module efficiency with 14 cm2 of active area achieves 22.35% (certified PCE was 21.7%). Thanks to the higher crystalline quality, these unencapsulated devices exhibit excellent operational stability at the maximum power point (~92% efficiency retention after 1000 h).

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Polymerization stabilized black-phase FAPbI3 perovskite solar cells retain 100% of initial efficiency over 100 days

Zidan Liu,Feng Liu,Chenghao Duan,Ligang Yuan,Hepeng Zhu,Jiong Li,Qiaoyun Wen,Geoffrey I.N. Waterhouse,Xianfeng Yang,Keyou Yan

DOI: https://doi.org/10.1016/j.cej.2021.129482

IF: 15.1

2021-09-01

Chemical Engineering Journal

Abstract:The black perovskite (α-FAPbI3) tends to spontaneously transform into the yellow non-perovskite (δ-FAPbI3) under ambient conditions, which degrades the performance and stability of FAPbI3-based perovskite solar cells (PSCs). Herein, we applied an in-situ polymerization controlled growth (IPCG) strategy for crystal grain to suppress the α-to-δ phase conversion. Polymerization of 2-(Dimethylamino) ethyl methacrylate (DMAEMA) contained in the antisolvent created polymers (denoted as Poly(D)) which acted to simultaneously increase the perovskite grain size, passivate defects, stabilize the black phase, and block moisture penetration, thus greatly improving photovoltaic performance and stability. The resulting FAPbI3-based PSC (FTO/SnO2/Perovskite/Spiro-OMeTAD/Au) delivered a high power conversion efficiency (PCE) of ~ 21% (cf. ~ 16.0% PCE for the pristine FAPbI3 device). Further, the polymerization strategy delivers PSCs with remarkable stability, with 100% of the initial PCE performance being retained over 104 days under ambient conditions (room temperature, RH = 50 ± 5%) without encapsulation of the device.

engineering, chemical, environmental
Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Shiheng Wang,Huaiqing Luo,Zhenkun Gu,Rudai Zhao,Lutong Guo,Na Wang,Yunjie Lou,Qun Xu,Shou Peng,Yiqiang Zhang,Yanlin Song

DOI: https://doi.org/10.1002/adfm.202214834

IF: 19

2023-03-23

Advanced Functional Materials

Abstract:A strategy of 4‐fluorobenzamide (FBAD) molecular controlled perovskite crystallization is proposed to suppress the fast reaction between the FAI and PbI2 for high‐quality α‐FAPbI3 films. The optimized solar cell achieves a champion device power conversion efficiency of 24.08% with excellent stability. This study offers an efficient approach to incorporate the only additive of FBAD to produce high‐quality perovskite films for high‐performance solar cells. The two‐step sequentially deposition strategy has been widely used to produce high‐performance FAPbI3‐based solar cells. However, due to the rapid reaction between PbI2 and FAI, a dense perovskite film forms on top of the PbI2 layer immediately and blocks the FAI diffusion into the bottom of the PbI2 film for a complete reaction, which results in a low‐efficiency and limited reproducibility of perovskite solar cells (PSCs). Here, high‐quality α‐FAPbI3 perovskite films by crystal growth regulation with 4‐fluorobenzamide additives is fabricated. The additives can interact with FAI to suppress the fast reaction between the FAI and PbI2 and effectively passivate the under‐coordinated Pb2+ or I‐ defects. As a result, α‐FAPbI3 perovskite films with low trap density and large grain size are prepared. The modified PSCs present a high‐power conversion efficiency of 24.08%, maintaining 90% of their initial efficiency after 1400 h in high humidity. This study provides an efficient strategy of synergistic crystallization and passivation to form high‐quality α‐FAPbI3 films for high‐performance PSCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Hock Beng Lee,Rishabh Sahani,Vasanthan Devaraj,Neetesh Kumar,Barkha Tyagi,Jin‐Woo Oh,Jae‐Wook Kang

DOI: https://doi.org/10.1002/admi.202201658

IF: 5.4

2022-11-29

Advanced Materials Interfaces

Abstract:Cesium iodide‐lead iodide:dimethyl sulfoxide complex additive plays an essential role in promoting the crystal growth and δ→α phase conversion of FAPbI3 perovskite. Perovskite solar cells based on the complex additive‐engineered α‐FAPbI3 film achieve a maximum efficiency of 21.9% with improved environmental stabilities. Solution‐processed formamidinium lead iodide (FAPbI3) perovskite is entropically metastable, and it exhibits condition‐induced crystal polymorphism. Under an ambient atmosphere, the photoactive black α‐FAPbI3 converts easily to photoinactive yellow δ‐FAPbI3. This α → δ phase degradation is further accelerated upon exposure to high temperature/humidity, directly threatening the performance and stability of perovskite solar cells (PSCs). Herein, cesium iodide‐lead iodide:dimethyl sulfoxide (CsI‐PbI2:DMSO) complex is introduced as a phase stabilizer to modulate the crystallization of α‐FAPbI3 perovskite from δ‐FAPbI3 precursor and simultaneously, serve as a defect passivator to suppress trap states formation. Theoretical simulations and experimental results reveal the pivotal role of complex additive in optimizing the energy band alignment and optoelectronic properties of α‐FAPbI3 perovskite and most importantly, hindering the α → δ phase transition. The best PSC device based on the additive‐engineered perovskite film achieves an efficiency of ≈21.9%, which is ≈11% higher than that of its pristine counterpart (≈19.8%). In addition, the incorporation of CsI‐PbI2:DMSO complex remarkably enhances the long‐term stability and photostability of the PSCs by inhibiting ion migrations and preserving the α‐phase in FAPbI3 perovskite. The additive engineering presented herein offers a route to produce FAPbI3‐based PSCs with improved performance, stability, and reproducibility.

materials science, multidisciplinary,chemistry
Single‐Crystal Seeds Inducing the Crystallization of High‐Performance α‐FAPbI3 for Efficient Perovskite Solar Cells

Jun He,Dewang Li,Hongli Liu,Junyan Xiang,Jiaxv Bai,Yuting Ren,Zhongyue Wang,Meng Xia,Xunjie Yin,Longfei Yuan,Fei Zhang,Shirong Wang

DOI: https://doi.org/10.1002/aenm.202300451

IF: 27.8

2023-05-03

Advanced Energy Materials

Abstract:Single‐crystal seeds are embedded in PbI2 films as nucleation sites to promote the rapid formation of high‐quality α‐phase formamidinium lead triiodide (α‐FAPbI3). The formamidine lead bromide (FAPbBr3) seed epitaxial growth crystallization method through a halogen anion exchange process achieves a high‐performance perovskite solar cell with prominent power conversion efficiency of 23.84% and impressive open circuit voltage of 1.18 V. α‐phase formamidine lead iodine (α‐FAPbI3) as a competitive candidate to pursue high‐performance perovskite solar cells (PSCs) suffers from the weakness of random nucleation and disordered growth in chasing high‐grade polycrystalline films. Here, single‐crystal seeds crystallization (SCSC) method is proposed to obtain high‐quality α‐FAPbI3 perovskite films for the first time. Six single‐crystals seeds (CsPbBr3, CsPbI3, FAPbBr3, FAPbI3, MAPbBr3, and MAPbI3) are employed to regulate α‐FAPbI3 perovskite crystallization. These seeds act as nucleation sites and allow the perovskite to grow directly. The rapid crystallization significantly improves the crystallinity of perovskite films with uniform morphology, large grain size, and less defects. Of particular note, FAPbBr3 seed prefers to grow α‐FAPbI3 epitaxially from FAPbBr3@PbI2 heterostructure through a halogen anion exchange process. The average grain size of FAPbBr3‐perovskite film is boosted to 2.6 μm, and the trap density reduced by 11 times. The resultant FAPbBr3‐PSCs achieve a maximum power conversion efficiency (PCE) of 23.84% with a high open‐circuit voltage of 1.18 V. The unencapsulated PSC retains 91% of the initial PCE after 3000 h of storage at ≈30–50% relative humidity and preserves 98.5% of the original value after 155 h illumination with maximum power point tracking.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
The Molecular Additive N-Acetyl-L-Phenylalanine Delays the Crystallization and Suppresses the Phase Impurity for Achieving Triple-Cation Perovskite Solar Cells with Efficiency over 25.

Yang Ding,Siyuan Lu,Jianhui Chang,Erming Feng,Hengyue Li,Caoyu Long,Yingguo Yang,Chenyi Yi,Zijian Zheng,Liming Ding,Junliang Yang

DOI: https://doi.org/10.1002/smll.202410601

2024-01-01

Abstract:The crystallization process plays an important role in the formation of high-quality perovskite film for achieving efficient perovskite solar cells (PSCs), especially in the formation of mixed-cation perovskite film, as there are normally more phase impurities than in pure CH(NH2)2PbI3 (FAPbI3) film. Herein, a molecular additive strategy, i.e., introducing non-planar molecule N-acetyl-L-phenylalanine (APO) into the lead iodide (PbI2) precursor solution, is proposed to modulate crystallization kinetics and inhibit the generation of phase impurities of metastable pretreated perovskite film. The delayed crystallization process promotes a sufficient reaction between organic salts solution and inorganic Pb-I framework, and perovskite phase decomposition is prevented by forming strong hydrogen bonds between ─NH and I, resulting in the formation of uniform film with large-size crystal grains and high-purity crystalline phase. Ultimately, the target PSC devices achieve an impressive power conversion efficiency (PCE) of 25.05%, which is among the highest values of triple-cation (FAMACs) PSCs. Meanwhile, PSC modules with 10.8 cm2 obtain a PCE of 20.35%. Furthermore, the unencapsulated PSCs retain 94% of the initial efficiency after 40 days of storage under ambient conditions with 20% RH and also yield superior operational stability under light soaking at maximum power point tracking (MPPT) in nitrogen (N2) atmosphere.
Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Xu Liu,Lei Shi,Jialiang Huang,Ziheng Liu,Pengfei Zhang,Jae Sung Yun,Arman Mahboubi Soufiani,Jan Seidel,Kaiwen Sun,Ziv Hameiri,John A. Stride,Yuanfang Zhang,Martin A. Green,Hong Lin,Xiaojing Hao

DOI: https://doi.org/10.1002/solr.201800338

IF: 9.1726

2019-01-01

Solar RRL

Abstract:While interfacial and grain-boundary passivation presently attract enormous research interest for perovskite solar cells (PSCs), the improvement of Cs-(FAPbI(3))(X)(MAPbBr(3))(Y) bulk quality still lacks systematical study, especially for constructing polycrystalline layers in planar configurations. Here, a DMSO-molecule-process for improving the quality of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) is developed, where the molar ratio of precursors, the kind of anti-solvents, and speed-time profiles are found critical. The optimized treatment significantly enhanced the crystal orientation, grain size, surface roughness, photo-response, carrier lifetime, and contact potential difference of absorbers. Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) absorbers also present superior charge transport, as well as reduced carrier recombination and decreased trap densities via DMSO-molecule-control, enabling performance improvement on both long-term stability and photovoltaic parameters of 1cm(2) PSCs. Champion planar cells demonstrated a power conversion efficiency (PCE) of 21.07% (0.159cm(2)) and PCE of 19.4% (1cm(2)) with negligible hysteresis. Moreover, 1cm(2) devices retained 90% of initial PCE after aging 50 days in ambient air.
Multifunctional Crosslinking‐Enabled Strain‐Regulating Crystallization for Stable, Efficient α‐FAPbI 3 ‐Based Perovskite Solar Cells

Hengkai Zhang,Zhiliang Chen,Minchao Qin,Zhiwei Ren,Kuan Liu,Jiaming Huang,Dong Shen,Zehan Wu,Yaokang Zhang,Jianhua Hao,Chun‐sing Lee,Xinhui Lu,Zijian Zheng,Wei Yu,Gang Li

DOI: https://doi.org/10.1002/adma.202008487

IF: 29.4

2021-06-04

Advanced Materials

Abstract:α-Formamidinium lead triiodide (α-FAPbI3) represents the state-of-the-art for perovskite solar cells (PSCs) but experiences intrinsic thermally induced tensile strain due to a higher phase-converting temperature, which is a critical instability factor. An in situ crosslinking-enabled strain-regulating crystallization (CSRC) method with trimethylolpropane triacrylate (TMTA) is introduced to precisely regulate the top section of perovskite film where the largest lattice distortion occurs. In CSRC, crosslinking provides in situ perovskite thermal-expansion confinement and strain regulation during the annealing crystallization process, which is proven to be much more effective than the conventional strain-compensation (post-treatment) method. Moreover, CSRC with TMTA successfully achieves multifunctionality simultaneously: the regulation of tensile strain, perovskite defects passivation with an enhanced open-circuit voltage (VOC = 50 mV), and enlarged perovskite grain size. The CSRC approach gives significantly enhanced power conversion efficiency (PCE) of 22.39% in α-FAPbI3-based PSC versus 20.29% in the control case. More importantly, the control PSCs' instability factor—residual tensile strain—is regulated into compression strain in the CSRC perovskite film through TMTA crosslinking, resulting in not only the best PCE but also outstanding device stability in both long-term storage (over 4000 h with 95% of initial PCE) and light soaking (1248 h with 80% of initial PCE) conditions.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Dongqin Bi,Chenyi Yi,Jingshan Luo,Jean-David Décoppet,Fei Zhang,Shaik Mohammed Zakeeruddin,Xiong Li,Anders Hagfeldt,Michael Grätzel

DOI: https://doi.org/10.1038/nenergy.2016.142

IF: 56.7

2016-09-19

Nature Energy

Abstract:The past several years have witnessed the rapid emergence of a class of solar cells based on mixed organic–inorganic halide perovskites. Today’s state-of-the-art perovskite solar cells (PSCs) employ various methods to enhance nucleation and improve the smoothness of the perovskite films formed via solution processing. However, the lack of precise control over the crystallization process creates a risk of forming unwanted defects, for example, pinholes and grain boundaries. Here, we introduce an approach to prepare perovskite films of high electronic quality by using poly(methyl methacrylate) (PMMA) as a template to control nucleation and crystal growth. We obtain shiny smooth perovskite films of excellent electronic quality, as manifested by a remarkably long photoluminescence lifetime. We realize stable PSCs with excellent reproducibility showing a power conversion efficiency (PCE) of up to 21.6% and a certified PCE of 21.02% under standard AM 1.5G reporting conditions.

materials science, multidisciplinary,energy & fuels
Optimization of Α-Fapbi3 Crystallization by Intermediate Compounds Transformation for Efficient and Stable Perovskite Solar Cells

Ruochuan Liu,Chunyan Deng,Guodong Li,Yibo Tu,Gaoyuan Yang,Hongyu Chen,Jing Song,Qin Zhou,Yue Zang,Lei Weng,Liang Chu,Jihuai Wu,Wensheng Yan

DOI: https://doi.org/10.1016/j.cej.2024.157734

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Efficient and stable perovskite solar cells (PSCs) is inseparable from the deposition of splendid perovskite absorbent layer. The intermediate compounds of (PbI2)2RbAc was constructed through the introduction of RbAc additive in the PbI2 precursor solution, and further transformed into the (PbI2)2RbCl secondary phase under the annealing of perovskite films, along with delaying the growth of perovskite crystals, regulating residual PbI2, and optimizing the quality of perovskite crystals. Besides, the introduction of RbAc additive passivated the defects of α-FAPbI3 perovskite and inhibited the non-radiative recombination of carriers. Based on the novel mechanism of regulating α-FAPbI3 crystallization through secondary phase transformation, PSCs optimized with RbAc additive achieved a power conversion efficiency (PCE) of 24.45%, and the PSCs prepared under natural humid air environment obtained a PCE of 23.20%. Moreover, the optimized PSCs retained 91.55% of the initial PCE after 1200 h of storage, and showed excellent light and thermal stability.
Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

Jingjing Liu,Biao Shi,Qiaojing Xu,Yucheng Li,Yuxiang Li,Pengfei Liu,Zetong SunLi,Xuejiao Wang,Cong Sun,Wei Han,Diannan Li,Sanlong Wang,Dekun Zhang,Guangwu Li,Xiaona Du,Ying Zhao,Xiaodan Zhang

DOI: https://doi.org/10.1007/s40820-024-01406-4

2024-05-02

Abstract:Monolithic textured perovskite/silicon tandem solar cells (TSCs) are expected to achieve maximum light capture at the lowest cost, potentially exhibiting the best power conversion efficiency. However, it is challenging to fabricate high-quality perovskite films and preferred crystal orientation on commercially textured silicon substrates with micrometer-size pyramids. Here, we introduced a bulky organic molecule (4-fluorobenzylamine hydroiodide (F-PMAI)) as a perovskite additive. It is found that F-PMAI can retard the crystallization process of perovskite film through hydrogen bond interaction between F- and FA+ and reduce (111) facet surface energy due to enhanced adsorption energy of F-PMAI on the (111) facet. Besides, the bulky molecular is extruded to the bottom and top of perovskite film after crystal growth, which can passivate interface defects through strong interaction between F-PMA+ and undercoordinated Pb2+/I-. As a result, the additive facilitates the formation of large perovskite grains and (111) preferred orientation with a reduced trap-state density, thereby promoting charge carrier transportation, and enhancing device performance and stability. The perovskite/silicon TSCs achieved a champion efficiency of 30.05% based on a silicon thin film tunneling junction. In addition, the devices exhibit excellent long-term thermal and light stability without encapsulation. This work provides an effective strategy for achieving efficient and stable TSCs.
Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Chenxu Zhao,Qi Zhang,Yongao Lyu,Jing Liu,Fan Shen,Huijing Liu,Hao Kong,Huifang Han,Anurag Krishna,Jia Xu,Hong Zhang,Jianxi Yao

DOI: https://doi.org/10.1002/adfm.202404099

IF: 19

2024-06-04

Advanced Functional Materials

Abstract:A novel organic multifunctional additive, 2‐(furan‐3‐yl)ethanamine hydrochloride (FFEACl), is introduced in this study, which plays a pivotal role in promoting the oriented crystallization of the α‐phase FAPbI3 and reducing defect density in the resulting perovskite film. Consequently, the top‐performing PSC exhibits an impressive power conversion efficiency of 25.41%, along with enhanced operational stability. Efficient manipulation of crystallization and control over defects are crucial for optimizing the performance and durability of perovskite solar cells (PSCs). In this study, a novel organic multifunctional additive, 2‐(furan‐3‐yl)ethanamine hydrochloride (FFEACl), is introduced which plays a pivotal role in regulating the crystallization process of FAPbI3. Incorporating FFEACl into the perovskite precursor solution effectively suppresses the formation of undesirable non‐perovskite phase impurities while promoting the oriented crystallization of the α‐phase FAPbI3. Moreover, the addition of FFEACl leads to a more uniform surface potential and reduced defect density in the resulting FAPbI3 film. Consequently, the top‐performing PSC exhibits an impressive power conversion efficiency (PCE) of 25.41%, along with enhanced operational stability. Notably, the fabricated PSCs maintain over 80% of their initial PCE even after 1000 h of continuous operation under one‐sun illumination. The findings present a facile and effective strategy for fabricating perovskite photovoltaic devices with exceptional performance and long‐term reliability.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Modulation of Nucleation and Crystallization in PbI2 Films Promoting Preferential Perovskite Orientation Growth for Efficient Solar Cells

Wenlong Shao,Haibing Wang,Feihong Ye,Cheng Wang,Chen Wang,Hongsen Cui,Kailian Dong,Yansong Ge,Ti Wang,Weijun Ke,Guojia Fang

DOI: https://doi.org/10.1039/d2ee03342a

2022-12-10

Energy and Environmental Sciences

Abstract:Formamidinium (FA)-rich lead iodide perovskite solar cells (PSCs) are gaining popularity because of their excellent photovoltaic performance. Nevertheless, the FA-rich perovskites processed by a two-step sequential deposition method usually possess many non-radiative recombination sites, undesired crystal orientations, and too much excess lead iodide (PbI2) that can seriously deteriorate device performance. Here, we modulate the nucleation and crystallization of the PbI2 films by introducing pentafluoroanilinium trifluoromethanesulfonate (PFAT) into PbI2 precursor solutions. Such modulatory PbI2 films as porous templates allow the growth of perovskites with a preferential orientation, enlarged grains, reduced defects, and decreased PbI2 residues, owing to the reduced Gibbs free energy of PbI2 and the acceleration of perovskite formation. Ultimately, we derive FA-rich lead iodide PSCs with an impressive power conversion efficiency of 24.52%, which is among the highest values of two-step sequential deposition-processed PSCs. Furthermore, the unencapsulated device maintains ~90% of its initial efficiency after 500 hours of maximum power point loading under constant light irradiation at ~55°C in an N2 atmosphere. This study presents an effective way to improve the crystalline quality of perovskites by synchronously pre-modulating the morphology, nucleation, and crystallization of PbI2 precursor films.

energy & fuels,chemistry, multidisciplinary,engineering, chemical,environmental sciences
Controlled Nucleation and Oriented Crystallization of Methylammonium‐Free Perovskites via In‐Situ Generated 2D Perovskite Phases

Yuping Gao,Zonglong Song,Qiang Fu,Yu Chen,Liu Yang,Ziyang Hu,Yongsheng Chen,Yongsheng Liu

DOI: https://doi.org/10.1002/adma.202405921

IF: 29.4

2024-06-23

Advanced Materials

Abstract:Enhancing stability while maintaining high efficiency is among the primary challenges in the commercialization of perovskite solar cells (PSCs). Here, a crystal growth technique assisted by in‐situ generated 2D perovskite phases has been developed to construct high quality 2D/3D perovskite films. The in‐situ generated 2D perovskite serve as templates for regulating the nucleation and oriented crystal growth in the α‐FAPbI3‐rich film. This led to a high film quality with much reduced trap density and an ultralong carrier lifetime. The obtained perovskite film shows excellent stability under extreme environment conditions (T = 200 °C, RH = 75 ± 5%). The corresponding PSC achieved an efficiency of 26.16% (certified 25.84%), along with excellent operational stability (T93 > 1300 hours, T = ∼50 °C) as well as outstanding high and low temperature cycle stability. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells

Yao Zhang,Xiangyu Sun,Zhen Guan,Dongni Li,Qingya Wang,Yansong Yue,Fangze Liu,Jing Wei,Hongbo Li

DOI: https://doi.org/10.1002/smtd.202400214

IF: 12.4

2024-06-20

Small Methods

Abstract:For perovskite based on a two‐step method, N‐methylpyrrolidone (NMP) is doped into the PbI2 solution to obtain a stable and homogeneous PbI2‐NMP complex. The interaction between NMP and FAI made it a bridge to promote the reaction between PbI2 and FAI, leading to (001)‐oriented quasi‐single‐crystal perovskite films with carrier lifetime of 1.5 μs and grain size larger than 3 μm. Solar cells exhibit an efficiency of 24.1% with working stability of T96 = 300 h. Controllable fabrication of formamidinium (FA)‐based perovskite solar cells (PSCs) with both high efficiency and long‐term stability is the key to their further commercialization. However, the diversity of PbI2 complexes and perovskite compositions usually leads to light sensitive PbI2 residues and phase impurities in the film, which can accelerate the device degradation. Here, the crystallization kinetics of FA‐based perovskite films are studied and a bridging‐solvent strategy is proposed to modulate the reaction kinetics between PbI2 and ammonium salts by prohibiting the formation of undesired intermediates. N‐methylpyrrolidone (NMP) solvent is introduced into the PbI2 precursor solution to obtain stable and homogeneous PbI2‐NMP complex films. The strong interaction between NMP and formamidinium iodide (FAI) molecules promotes the conversion from PbI2‐NMP into (001)‐oriented quasi‐single‐crystal perovskite films with negligible impurities, long carrier lifetime of 1.5 μs and a large grain size of 3 μm. The optimized PSCs exhibit a high power conversion efficiency of 24.1%, as well as superior shelf stability which maintains 95% initial efficiency after storage in air for 1200 h (T95 = 1200 h), and operating stability with T96 = 300 h under continuous working at the maximum power point. This work offers a simple and reproducible method for fabricating phase‐pure and uniaxially oriented perovskite films.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology

[Eye diseases caused by Leptospira canicola].

Enhanced Crystallization and Optimized Morphology of Perovskite through Doping Indium-Based Metal-Organic Assembly: Achieving Significant Solar Cell Efficiency Enhancements

Stable α‐FAPbI3 via porous PbI2 for efficient perovskite solar cells

Phase‐pure Α‐Fapbi3 Perovskite Solar Cells via Activating Lead‐Iodine Frameworks

Protic Amine Carboxylic Acid Ionic Liquids Additives Regulate α‐FAPbI 3 Phase Transition for High Efficiency Perovskite Solar Cells

Epitaxial Growth of α‐FAPbI3 at a Well‐Matched Heterointerface for Efficient Perovskite Solar Cells and Solar Modules

CsPb2Br5 assisted direct crystallization of 3D perovskite phase for highly efficient and stable solar cells

Polymerization stabilized black-phase FAPbI3 perovskite solar cells retain 100% of initial efficiency over 100 days

Crystal Growth Regulation of α‐FAPbI3 Perovskite Films for High‐Efficiency Solar Cells with Long‐Term Stability

Complex Additive‐Assisted Crystal Growth and Phase Stabilization of α‐FAPbI3 Film for Highly Efficient, Air‐Stable Perovskite Photovoltaics

Single‐Crystal Seeds Inducing the Crystallization of High‐Performance α‐FAPbI3 for Efficient Perovskite Solar Cells

The Molecular Additive N-Acetyl-L-Phenylalanine Delays the Crystallization and Suppresses the Phase Impurity for Achieving Triple-Cation Perovskite Solar Cells with Efficiency over 25.

Improvement of Cs-(FAPbI(3))(0.85)(MAPbBr(3))(0.15) Quality Via DMSO-Molecule-Control to Increase the Efficiency and Boost the Long-Term Stability of 1cm(2) Sized Planar Perovskite Solar Cells

Multifunctional Crosslinking‐Enabled Strain‐Regulating Crystallization for Stable, Efficient α‐FAPbI 3 ‐Based Perovskite Solar Cells

Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%

Optimization of Α-Fapbi3 Crystallization by Intermediate Compounds Transformation for Efficient and Stable Perovskite Solar Cells

Textured Perovskite/Silicon Tandem Solar Cells Achieving Over 30% Efficiency Promoted by 4-Fluorobenzylamine Hydroiodide

Regulating the Crystallization of FAPbI3‐Based Perovskite with a Furan Substituted Ethylammonium Additive for Achieving Highly Efficient Solar Cells

Modulation of Nucleation and Crystallization in PbI2 Films Promoting Preferential Perovskite Orientation Growth for Efficient Solar Cells

Controlled Nucleation and Oriented Crystallization of Methylammonium‐Free Perovskites via In‐Situ Generated 2D Perovskite Phases

Bridging‐Solvent Strategy for Quasi‐Single‐Crystal Perovskite Films and Stable Solar Cells