Logic Design Principles: With Emphasis on Testable Semicustom Circuits

E. McCluskey

Abstract:Logic design principles: with emphasis on testable semicustom circuits , Logic design principles: with emphasis on testable semicustom circuits , مرکز فناوری اطلاعات و اطلاع رسانی کشاورزی

What problem does this paper attempt to address?

Wetting Behaviors and Mechanism of Micro Droplets on Hydrophilic Micropillar-Structured Surfaces

Xiang Zhang,Azhen Du,Yongsheng Luo,Cunjing Lv,Yu Shrike Zhang,Shujie Yan,Yuanda Wu,Jingjiang Qiu,Yong He,Lixia Wang,Qian Li

DOI: https://doi.org/10.1016/j.surfin.2022.102242

IF: 6.2

2022-01-01

Surfaces and Interfaces

Abstract:Controlling morphology of liquids on solid surfaces plays an important role in both fundamental research and practical applications. We found that, the shape of the liquid after contact between a droplet and a surface could be tuned by designing the hydrophilic micropillar arrays forming this surface. Such a wetting behavior is a result of imbibition in the micropillars, leading to specific final spreading distance and pattern of the droplet. During the spreading, the morphology of the droplet is controlled by both the arrangement and shape of the micropillars. The experimental results indicated that the surface energy barriers caused by the micropillar edges was a key factor accounting for the anisotropic spreading of the liquid. Moreover, the shape of the meniscus at the front location of the spreading liquid was rebuilt based on computational simulation, which agreed well with the experimental data. Interesting, the time-dependence of the displacement of the liquid transport at the edges was found to be different from that of a wicking film. Theoretical models were accordingly proposed to reveal the shape formation of liquids on such micropillar-structured surfaces.
Controllable Coalescence Dynamics of Nanodroplets on Textured Surfaces Decorated with Well-Designed Wrinkled Nanostructures: A Molecular Dynamics Study

Tao Li,Lishu Zhang,Hui Li

DOI: https://doi.org/10.1021/acs.langmuir.1c02052

IF: 3.9

2021-09-16

Langmuir

Abstract:The control of coalescence and motion of droplets play a significant role in advanced technology and our daily life, and one of the most important approaches is surface design. Here, the microtextured surfaces decorated with wrinkled substrates are designed and studied for coalescence behaviors. The simulation results show that the coalescence speed would be slower on such surfaces due to the downward movement of the droplets induced by the penetration of atoms into the grooves that delays their movement along the coalescence direction, which is considered as a restriction effect. With the increase of the angles and the interval distance of wrinkled structures, the coalescence time becomes longer and the coalescing process becomes unfavorable, resulting from the enhanced restriction effect. More importantly, a composite substrate possessing the original and sub-wrinkled structures has been designed to tune the coalescence dynamics. The results of this work may not only help shed light on understanding the coalescence behaviors on the wrinkled substrates but also propose a feasible method for controlling the liquid coalescence behavior, which is expected to provide some useful implications for practical applications.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.langmuir.1c02052.Reason for using liquid films rather than liquid droplets as the original coalescing model and quantitative relationship between the number of penetrating atoms and the coalescence time (PDF)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science
Investigation of triple-coalescence behaviors for comprehensively understanding the structural evolution of coalesced TiAl droplets from an atomic-level view

Tao Li,Jiawei Li,Meng Yan,Lishu Zhang,Chengrui Fu,Ying Ruan,Hui Li

DOI: https://doi.org/10.1016/j.jallcom.2020.157791

IF: 6.2

2021-04-01

Journal of Alloys and Compounds

Abstract:Although great progress has been made in the study of binary-coalescence dynamics, the coalescence behavior of multiple droplets remains to be further investigated as it plays a pivotal role in many industrial processes and advanced technologies. Here, the triple-coalescence dynamics of three metallic droplets are studied by employing molecular dynamics (MD) simulation. Firstly, simulation results give visible evidence that the coalescing process would be favorable when droplets are closely arranged or more liquid bridges are formed. Then, the triple-coalescence behaviors of one Al and two Ti droplets are explored by considering two strategies. When the Al droplet is initially located on the side position, a nonsynchronous coalescing behavior caused by the combination effect of preferential coalescing between two adjacent Ti droplets and “swallowing” coalescing of the Al droplet is observed, leading to some distinct transient segregation microstructures of the coalesced TiAl droplets that are highly sensitive to the arrangement mode during the structural evolution, which prolongs the formation of a homogeneous TiAl droplet. In another strategy involving one center Al droplet, however, the coalescing behavior changes to be synchronous, inducing a “sandwich-like” configuration of the TiAl droplet, which is beneficial to rapidly obtain a homogeneous microstructure of the coalesced TiAl droplet.

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Coalescence of Al droplet impacting on a melt surface

Meng Yan,Tao Li,Peiru Zheng,Fan Chen,Yanyan Jiang,Hui Li

DOI: https://doi.org/10.1016/j.rinp.2020.103733

IF: 4.565

2021-01-01

Results in Physics

Abstract:<p>The droplet falling into its bulk liquid surface is very common but complex which widely exists in nature and industry. In this case, the impact behavior is almost simultaneous with the coalescence. To deeply understand the dynamics and mechanism of this phenomenon, molecular dynamics simulations have been performed to study the characteristics of the impact coalescence process under different conditions. Results show that four coalescence behaviors, including rebound, calm coalescence, deformation and coating, are mainly determined by the impact velocity. Interestingly, a cavity is observed in the liquid bulk when the impact velocity is big enough, which can be explained by the momentum transfer. Beyond that, the mixing degree increases with Weber number and there is a critical Weber number between rebound and coalescence. The study illustrates how the temperature and impact velocity affects the coalescence behavior and provides opportunity to well understand the droplet impact process towards its melt surface.</p>

physics, multidisciplinary,materials science
Coalescence Dynamics of Droplets Collision on Substrates With Different Contact Angles

Lei Xing,Jinyu Li,Minghu Jiang,Lixin Zhao,Zhanjian Liu

DOI: https://doi.org/10.1016/j.colsurfa.2023.131573

2023-05-03

Abstract:Droplet collision coalescence is widely encountered in the petroleum industry, chemical industry, and agricultural applications. In this study, the dynamic behavior of the coalescence process of a free-falling droplet impacting a sessile droplet on substrates with different wettabilities is investigated via high-speed photography. The influences of the substrate contact angle ( α ) and the Weber number ( We ) of the droplet collision were analyzed. Based on the experiments, the process of droplet collision coalescence was divided into four stages: coalescence, spreading, retraction, and oscillation. The maximum spreading diameters, maximum jet heights, spreading velocities, and retraction velocities of droplets with different values of the substrate contact angle and We were obtained. The dynamic mechanism of different collision coalescence stages was revealed by the interconversion of inertial forces, surface tension, and wall adhesion forces. The relationship between the dimensionless spreading coefficient and the dimensionless time was established for different values of the collision We and contact angle α based on the experimental results. The effects of We and α on the coalescence process of the droplets were obtained by analysis of the energy conversion.

chemistry, physical
Wettability Transition of a Liquid Droplet on Solid Surface With Nanoscale Inverted Triangular Grooves

Meiling Cai,Yuxiu Li,Ying Chen,Jinliang Xu,Longyan Zhang,Junpeng Lei

DOI: https://doi.org/10.1115/mnhmt2019-4217

2019-07-08

Abstract:Abstract Inspired by a few phenomena in nature such as the lotus leaf, red rose petal, gecko’s feet and Nepenthes Alata plant, much attention has been paid to use simple and feasible means to achieve remarkable wetting behaviour for many applications in various areas including self-cleaning for building exteriors and windshields, oil/water separation, anti-icing, liquid collecting, anti-fogging and anti-corrosion. Based on the established theoretical models, wetting behaviour of a liquid droplet obtained by molecular dynamics simulation method is generally in good agreement with the experimental results. In macro and micro scale, the previous theories can explain and predict the wetting behaviors well. However, these theories are invalid for nanoscale. It is essential to reveal the underlying physical mechanism of the wetting behaviors of the droplet on solid surface with nanoroughness. Extensive studies on nanosale wettability focus on the effect of nano structures on wettability state. Desired wetting behavior of rough material surface achieved by nanosize reentrant geometry like “T” or mushroom shape and other variant geometry with solid overhangs has been widely used in self-cleaning surfaces, heat exchange and many applications. For example, “T” shape groove with different depths and widths under nanoscale has been considered to confer superhydrophobicity to hydrophilic surfaces gradually. In this paper, wettability transition of a liquid droplet on geometrically heterogeneous solid substrate with nanoscale structures of inverted triangular grooves is investigated by using molecular dynamics simulation method under the parameter space spanned by structure geometry and solid-liquid molecular interaction potential strength. Three wettability states, namely Cassie nonwetting state, Cassie-to-Wenzel transition state and Wenzel wetting state, are identified with various geometries and potential strength. For Cassie nonwetting state, increasing height of the triangles has less effect on wettability transition with weak solid-liquid molecular interaction. Besides, the Cassie nonwetting state is less sensitive to different interval between the triangles as solid-liquid molecular interaction is weak. For Cassie-to-Wenzel transition state, increasing height of the triangles and decreasing interval between the triangles decrease wettability. For Wenzel wetting state, increasing interval between the triangles with low height increases wettability. With strong solid-liquid molecular interaction, different interval between the triangles results in wetting state transition from Wenzel to transition state. What’s more, liquid droplet changes its state from Wenzel wetting state to Cassie-to-Wenzel transition state with increasing height of the triangles or decreasing interval between the triangles. Three wettability transition regions are identified in the parameter space.
Coalescence of immiscible sessile droplets on a partial wetting surface

Huadan Xu,Xinjin Ge,Tianyou Wang,Zhizhao Che

DOI: https://doi.org/10.1017/jfm.2023.685

2023-09-22

Abstract:Droplet coalescence is a common phenomenon and plays an important role in multi-disciplinary applications. Previous studies mainly consider the coalescence of miscible liquid, even though the coalescence of immiscible droplets on a solid surface is a common process. In this study, we explore the coalescence of two immiscible droplets on a partial wetting surface experimentally and theoretically. We find that the coalescence process can be divided into three stages based on the timescales and force interactions involved, namely (I) the growth of the liquid bridge, (II) the oscillation of the coalescing sessile droplet, and (III) the formation of a partially-engulfed compound sessile droplet and the subsequent retraction. In stage I, the immiscible interface is found not to affect the scaling of the temporal evolution of the liquid bridge, which follows the same 2/3 power law as that of miscible droplets. In Stage II, by developing a new capillary timescale considering both surface and interfacial tensions, we show that the interfacial tension between the two immiscible liquids functions as a nonnegligible resistance to the oscillation which decreases the oscillation periods. In Stage III, a modified Ohnesorge number is developed to characterize the visco-capillary and inertia-capillary timescales involved during the displacement of water by oil; a new model based on energy balance is proposed to analyze the maximum retraction velocity, highlighting that the viscous resistance is concentrated in a region close to the contact line.

Fluid Dynamics,Soft Condensed Matter
Wetting State Transitions of Individual Condensed Droplets on Pillared Textured Surfaces.

Chenlei Chu,Yinggang Zhao,Pengfei Hao,Cunjing Lv

DOI: https://doi.org/10.1039/d2sm01271e

IF: 4.046

2023-01-01

Soft Matter

Abstract:The ability to realize the self-removal of condensed droplets from a surface is of critical importance for science and applications such as water harvesting and thermal engineering. Despite the enormous interest in micro/nanotextured superhydrophobic materials for high-efficiency condensation, a clear picture of the wetting state transition of condensed droplets is missing, particularly, on a single-droplet level of the order of micrometers. Herein, by varying a substantial parameter space of the contact angle and the geometry of the pillared textures, we have quantified the wetting transition of individual droplets during condensation. We found that a droplet is finally either spontaneously removed from the textures due to a Laplace pressure difference or wets the textures; four different wetting state transition modes have been identified numerically and they are classified in a phase diagram. Simple theories have been constructed to correlate the critical conditions of the wetting state transition to the wettability and geometry of the textures, and they were verified experimentally. We found that the self-removal of condensed droplets benefits from the contact angle and the height of the pillars. These findings not only enhance our fundamental understanding of the wetting state transition of condensed droplets but also allow the rational design of micro/nanotextured water-repellent materials for anti-fogging and anti-wetting.
Droplet Coalescence by Selective Wettability Enhancement in Microfluidic Devices

Nahla Alamoodi,Anas Alazzam

DOI: https://doi.org/10.3390/nano10040737

IF: 5.3

2020-04-12

Nanomaterials

Abstract:A new approach for droplet coalescence in microfluidic channels based on selective surface energy alteration is demonstrated. The proposed method involves patterning the surface of cyclic olefin copolymer (COC), a hydrophobic substrate attached to a polydimethylsiloxane hydrophobic microchannel, with graphene oxide (GO) using standard microfabrication techniques. Surface wettability and adhesion analyses confirmed the enhancement of the COC surface energy upon GO patterning and the stability of the GO film on COC. Three representative cases are illustrated to demonstrate the effectiveness of the method on the coalescence of droplets for different droplet flow regimes, as well as the effect of changing the size of the patterned surface area on the fusion process. The method achieves droplet coalescence without the need for precise synchronization.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Probing the coalescence of non-Newtonian droplets on a substrate

Hao Chen,Xiaolong Pan,Qichun Nie,Qianli Ma,Haisheng Fang,Zhouping Yin

DOI: https://doi.org/10.1063/5.0085765

IF: 4.6

2022-03-01

Physics of Fluids

Abstract:To better understand the coalescence of droplets, which play critical roles in diverse natural processes and industrial applications, we give attention to the non-Newtonian rheology of liquid drops—in particular, studying the coalescence of two non-Newtonian droplets on a solid surface, with special attention to the effect of the shear thinning behavior. Based on a theoretical power-law model, we show that the height [Formula: see text] of the liquid bridge connecting two adjacent droplets grows with a power function of time as [Formula: see text], where [Formula: see text] indicates the power-law exponent. Through numerical simulations, we reveal a self-similar regime during the initial stage of coalescence and propose an accurate prediction for capturing the spatial structure of the flow. Our results also update the effect of the contact angle, which significantly alters the coalescence dynamics.

mechanics,physics, fluids & plasmas
Self-cleaning of hydrophobic rough surfaces by coalescence-induced wetting transition

Kaixuan Zhang,Zhen Li,Martin Maxey,Shuo Chen,George Em Karniadakis

DOI: https://doi.org/10.1021/acs.langmuir.8b03664

2018-10-31

Abstract:The superhydrophobic leaves of a lotus plant and other natural surfaces with self-cleaning function have been studied intensively for the development of artificial biomimetic surfaces. Surface roughness generated by hierarchical structures is a crucial property required for superhydrophobicity and self-cleaning. Here, we demonstrate a novel self-cleaning mechanism of textured surfaces attributed to a spontaneous coalescence-induced wetting transition. We focus on the wetting transition as it represents a new mechanism, which can explain why droplets on rough surfaces are able to change from the highly adhesive Wenzel state to the low-adhesion Cassie-Baxter state and achieve self-cleaning. In particular, we perform many-body dissipative particle dynamics simulations of liquid droplets sitting on mechanically textured substrates. We quantitatively investigate the wetting behavior of an isolated droplet as well as coalescence of droplets for both Cassie-Baxter and Wenzel states. Our simulation results reveal that droplets in the Cassie-Baxter state have much lower contact angle hysteresis and smaller hydrodynamic resistance than droplets in the Wenzel state. When small neighboring droplets coalesce into bigger ones on textured hydrophobic substrates, we observe a spontaneous wetting transition from a Wenzel state to a Cassie-Baxter state, which is powered by the surface energy released upon coalescence of the droplets. For superhydrophobic surfaces, the released surface energy may be sufficient to cause a jumping motion of droplets off the surface, in which case adding one more droplet to coalescence may increase the jumping velocity by one order of magnitude. When multiple droplets are involved, we find that the spatial distribution of liquid components in the coalesced droplet can be controlled by properly designing the overall arrangement of droplets and the distance between them.

Computational Physics,Fluid Dynamics
Coalescence and Rebound Dynamics in Two Droplets Train Impacting on a Heterogeneous Wettability Surface

Tongwei Zhang,Meixuan Li,Fei Dong,Fuxiang Huang,Kaku Chuyo,Jie Wu

DOI: https://doi.org/10.1021/acs.langmuir.4c02742

IF: 3.9

2024-10-22

Langmuir

Abstract:Droplets that can be steered and rebound off surfaces are fundamentally interesting and important due to their promising potential in numerous applications, such as anti-icing and -fogging, spray coating, and self-cleaning. Heterogeneous wettability surfaces have been shown to be an effective means of droplet manipulation. This paper combines numerical simulation with theoretical analysis to investigate the dynamics of two droplets training impacting on and bouncing off a heterogeneous surface (superhydrophobic substrate decorated with a hydrophilic strip). First, the time evolutions of the droplet morphology and velocity vectors are examined to explore the particular dynamic behaviors. At different ratios of the impact velocity, three distinct rebound patterns are observed, and a regime diagram is established. After that, the effects of the impact conditions and surface wettability on the rebound performance of the coalesced droplet are studied systematically. Special attention is paid to the variations of the rebound height and the lateral transportation distance with the Weber number of two droplets and the distance between the impacting point and the hydrophilic stripe. Moreover, a theoretical analysis of two droplets' impact is performed based on the energy conservation. The obtained scaling laws match well with the numerical data in the trend. Our research may strengthen the understanding of the interactions between droplets, which is valuable for the manipulation of multiple droplets in related fields.
Droplet attraction and coalescence mechanism on textured oil-impregnated surfaces

Haobo Xu,Yimin Zhou,Dan Daniel,Joshua Herzog,Xiaoguang Wang,Volker Sick,Solomon Adera

DOI: https://doi.org/10.1038/s41467-023-40279-w

IF: 16.6

2023-08-19

Nature Communications

Abstract:Droplets residing on textured oil-impregnated surfaces form a wetting ridge due to the imbalance of interfacial forces at the contact line, leading to a wealth of phenomena not seen on traditional lotus-leaf-inspired non-wetting surfaces. Here, we show that the wetting ridge leads to long-range attraction between millimeter-sized droplets, which coalesce in three distinct stages: droplet attraction, lubricant draining, and droplet merging. Our experiments and model show that the magnitude of the velocity and acceleration at which droplets approach each other horizontally is the same as the vertical oil rise velocity and acceleration in the wetting ridge. Moreover, the droplet coalescence mechanism can be modeled using the classical mass-spring system. The insights gained from this work will inform future fundamental studies on remote droplet interaction on textured oil-impregnated surfaces for optimizing water harvesting and condensation heat transfer.

multidisciplinary sciences
Coalescence-Induced Droplet Jumping on Superhydrophobic Surfaces with Annular Wedge-Shaped Micropillar Arrays

Huimin Hou,Xiaomin Wu,Zhifeng Hu,Sihang Gao,Zhiping Yuan

DOI: https://doi.org/10.1021/acs.langmuir.3c02534

2023-01-01

Abstract:The coalescence-induced droplet jumping on superhydrophobic surfaces has extensive application potential in water harvesting, thermal management of electronic devices, and microfluidics. The rational design of the surface structure can influence the interaction between the droplet and the surface, thereby controlling the velocity and direction of the droplet's jumping. In this study, we fabricate the superhydrophobic surface with annular wedge-shaped micropillar arrays, examine the dynamic behavior of condensate droplets on the surface, and measure the temporal and spatial variations of droplet density, average radius, and surface coverage with wedge-shaped micropillars of varying sizes. In addition, the energy analysis of the coalescence-induced droplet jumping reveals that the two primary factors influencing the jumping are the relative size and position of the droplets and micropillars. Further numerical simulations find that the wedge-shaped micropillars cause an asymmetric distribution of pressure within the droplet and at the solid-liquid contact surface, which generates an unbalanced force driving the droplet in the gradient direction of the wedge-shaped micropillar, causing the droplet to jump off the surface with both vertical and gradient-direction velocities. The capacity of the wedge-shaped micropillar surface to transport droplets in the gradient direction increases and then decreases as the relative size of the droplets and micropillars increases. The relative position of the droplet center-of-mass line perpendicular to the bottom edge of the wedge micropillars' trapezoidal shape is more favorable for droplet transport. This work reveals the influence mechanism of surface structure on the velocity and direction of droplet jumping, and the results can guide the microstructure design of superhydrophobic surfaces, which has significant implications for the application of droplet jumping.
Coalescence-induced droplet jumping on superhydrophobic surfaces with non-uniformly distributed micropillars

Huimin Hou,Xiaomin Wu,Zhifeng Hu,Sihang Gao,Liyu Dai,Zhiping Yuan

DOI: https://doi.org/10.1016/j.colsurfa.2023.132127

2023-07-27

Abstract:The phenomenon of droplet jumping induced by coalescence holds significant potential for application in diverse areas such as water collection, self-cleaning, and thermal management of electronic devices. In comparison to a flat surface, a superhydrophobic surface with structure can affect the interaction between the droplet and the surface, thereby affecting parameters such as the droplet jumping velocity. In this study, numerical simulation was used to examine the similarities and differences of coalescence-induced droplet jumping on superhydrophobic surfaces with uniform and non-uniform micropillars, as well as the effect of micropillar non-uniformity on droplet jumping. The results indicated that the non-uniform distribution of micropillars could lead to asymmetries in the shrinkage of the liquid bridge, the morphology of the droplet when it jumps off the surface, and the distribution of the high-pressure region at the bottom of the droplet. Additionally, it decreased the droplet's vertical velocity while substantially increasing the horizontal velocity. When the droplet radius was constant, decreasing the micropillar width or increasing the micropillar spacing on the sparse side was advantageous for the droplet jumping on a superhydrophobic surface with non-uniform micropillars. By defining the solid fraction on the micropillar surface with non-uniform distribution, the coupling effect of the width and spacing of the micropillars on the droplet jumping was thoroughly analyzed, and the optimal solid fraction for the best directional transport effect of droplets was determined. This study revealed the mechanism underlying the effect of surface micropillar structure on coalescence-induced droplet jumping, and the findings could guide the design of superhydrophobic surface microstructures, which was of great significance for the advancement of droplet jumping applications.

chemistry, physical
Relationship between condensed droplet coalescence and surface wettability

Fuqiang Chu,Xiaomin Wu,Yi Zhu,Zhiping Yuan

DOI: https://doi.org/10.1016/j.ijheatmasstransfer.2017.04.052

IF: 5.2

2017-01-01

International Journal of Heat and Mass Transfer

Abstract:Droplet condensation, which has better heat transfer performance than film condensation, can improve the efficiency of various engineering applications such as power generation, water harvesting and air conditioning. With the growth of condensed droplets, coalescence among these droplets is certainly taking place. Since the coalescence behavior greatly influences the droplet growth, the relationship between the droplet coalescence and the surface wettability needs to be understood. In this study, condensation experiments on prepared surfaces with various wettability were performed to observe the droplet coalescence behavior. The relationship between the droplet coalescence and the surface wettability was discussed and a regional map was created to classify different droplet coalescence behavior with four regions divided. To make the divided regions understandable, a dimensionless number called the Hysteresis number was first defined to denote the relative importance of the contact angle hysteresis compared to the contact angle for a random surface. Besides the application for analyzing the droplet coalescence behavior, the Hysteresis number can be widely applied for analyzing surface-droplet interactions in various engineering fields with a high value indicating that the contact angle hysteresis plays an important role and cannot be ignored. (C) 2017 Elsevier Ltd. All rights reserved.
States of a Water Droplet on Nanostructured Surfaces

Shuai Chen,Jiadao Wang,Darong Chen

DOI: https://doi.org/10.1021/jp504070e

2014-01-01

The Journal of Physical Chemistry C

Abstract:Wetting behavior of a water droplet on nanostructured surfaces is studied by molecular dynamics simulations. The results show that the equilibrium states can be classified into four categories: the Wenzel, the metastable Cassie, the globally steady Cassie, and the Cross state. For the Wenzel state, the equilibrium state is independent of the initial state of the water droplet, and always in the Wenzel state no matter if the initial state is the Wenzel or the Cassie state. For the metastable Cassie state, the equilibrium state is dependent on the initial state: the equilibrium state presents as the Cassie state only when the initial state is the Cassie state, otherwise it presents as the Wenzel state. For the globally steady Cassie state, it is always in an equilibrium state of the Cassie state regardless of the initial state, which indicates that the transition from the Wenzel to the Cassie state can spontaneously happen. The results also show that the equilibrium state remains unchanged with the droplet size increasing for these three states. The Cross state is a state that can only be found on nanostructured surfaces, and the existence of this state should be attributed to the structured water molecules in the nanostructures. Furthermore, calculation from a criterion derived from a continuum mechanical analysis for the Cassie state is given, and the results demonstrate that the predictions from the criteria for the Cassie state agree with the results from molecular dynamics simulation for the globally steady Cassie state.
Wetting Transitions of Condensed Droplets on Superhydrophobic Surfaces with Two-Tier Roughness

Cunjing Lv,Pengfei Hao,Xiwen Zhang,Feng He

DOI: https://doi.org/10.48550/arXiv.1506.08236

2015-06-26

Soft Condensed Matter

Abstract:Although realizing wetting transitions of droplets spontaneously on solid rough surfaces is quite challenging, it is becoming a key research topic in many practical applications which require highly efficient removal of liquid. We report wetting transitions of condensed droplets occurring spontaneously on pillared surfaces with two-tier roughness owing to excellent superhydrophobicity. The phenomenon results from further decreased Laplace pressure on the top side of the individual droplet when its size becomes comparable to the scale of the micropillars, which leads to a surprising robust spontaneous wetting transition, from valleys to tops of the pillars. A simple scaling law is derived theoretically, which demonstrates that the critical size of the droplet is determined by the space of the micropillars. For this reason, highly efficient removal of water benefits greatly from smaller micropillar space. Furthermore, three wetting transition modes exist, in which the in situ wetting behaviors are in good agreement with our quantitative theoretical analysis.
From Initial Nucleation to Cassie-Baxter State of Condensed Droplets on Nanotextured Superhydrophobic Surfaces.

Cunjing Lv,Xiwen Zhang,Fenglei Niu,Feng He,Pengfei Hao

DOI: https://doi.org/10.1038/srep42752

IF: 4.6

2017-01-01

Scientific Reports

Abstract:Understanding how droplet condensation happens plays an essential role for our fundamental insights of wetting behaviors in nature and numerous applications. Since there is a lack of study of the initial formation and growing processes of condensed droplets down to nano-/submicroscale, relevant underlying mechanisms remain to be explored. We report an in situ observation of vapor condensation on nano-/microtextured superhydrophobic surfaces using optical microscopy. An interesting picture of the vapor condensation, from the initial appearance of individual small droplets (≤1 μm) to a Cassie-Baxter wetting state (>30 μm), are exhibited. It is found that individual droplets preferentially nucleate at the top and the edge of single micropillars with very high apparent contact angles on the nanotextures. Scenarios of two distinguished growing modes are reported statistically and the underlying mechanisms are discussed in the view of thermodynamics. We particularly reveal that the formation of the Cassie-Baxter wetting state is a result of a continuous coalescence of individual small droplets, in which the nanotexture-enhanced superhydrophobicity plays a crucial role. We envision that these fundamental findings can deepen our understanding of the nucleation and development of condensed droplets in nanoscale, so as to optimize design strategies of superhydrophobic materials for a broad range of water-harvesting and heat-transfer systems.
The effect of surface texturing on the laser-induced wetting behavior of AlSi5 alloy on Ti6Al4V alloy

Haoyue Li,Liqun Li,Rongrong Huang,Caiwang Tan,Jin Yang,Hongbo Xia,Bo Chen,Xiaoguo Song

DOI: https://doi.org/10.1016/j.apsusc.2021.150630

IF: 6.7

2021-11-01

Applied Surface Science

Abstract:Due to the shorter heating time and strongly nonisothermal nature of laser-heating, laser-induced wetting behavior exhibits a huge difference when compared to isothermal wetting. In this study, the laser-induced wetting behavior of AlSi5 alloys on Ti6Al4V substrates with various microtextures was investigated. The role of microtexture in wetting was evaluated using interfacial structures, surface energy, and thermodynamics. The results showed that the laser-induced wetting behavior on untextured Ti6Al4V was dominated by adsorption/desorption and the surface textures changed the dominant limiting factors to diffusion during the early wetting process (stage III-1). After surface texturing, the diffusion of Ti atoms was promoted at the interface, while texturing had a limited effect on the types of intermetallic compounds. The surface energy of textured substrates increased, which was beneficial for wetting. In addition, microtextures led to the generation of energy barriers in the perpendicular direction while affording promotion in the parallel direction. This led to the distortion and stretching of droplets, resulting in anisotropic wetting behavior. The wetting behavior was determined by the synergistic effects of the reaction, surface energy, and thermodynamic driving force. Wettability was promoted only for a groove distance larger than 0.25 mm.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films

Logic Design Principles: With Emphasis on Testable Semicustom Circuits

Wetting Behaviors and Mechanism of Micro Droplets on Hydrophilic Micropillar-Structured Surfaces

Controllable Coalescence Dynamics of Nanodroplets on Textured Surfaces Decorated with Well-Designed Wrinkled Nanostructures: A Molecular Dynamics Study

Investigation of triple-coalescence behaviors for comprehensively understanding the structural evolution of coalesced TiAl droplets from an atomic-level view

Coalescence of Al droplet impacting on a melt surface

Coalescence Dynamics of Droplets Collision on Substrates With Different Contact Angles

Wettability Transition of a Liquid Droplet on Solid Surface With Nanoscale Inverted Triangular Grooves

Coalescence of immiscible sessile droplets on a partial wetting surface

Wetting State Transitions of Individual Condensed Droplets on Pillared Textured Surfaces.

Droplet Coalescence by Selective Wettability Enhancement in Microfluidic Devices

Probing the coalescence of non-Newtonian droplets on a substrate

Self-cleaning of hydrophobic rough surfaces by coalescence-induced wetting transition

Coalescence and Rebound Dynamics in Two Droplets Train Impacting on a Heterogeneous Wettability Surface

Droplet attraction and coalescence mechanism on textured oil-impregnated surfaces

Coalescence-Induced Droplet Jumping on Superhydrophobic Surfaces with Annular Wedge-Shaped Micropillar Arrays

Coalescence-induced droplet jumping on superhydrophobic surfaces with non-uniformly distributed micropillars

Relationship between condensed droplet coalescence and surface wettability

States of a Water Droplet on Nanostructured Surfaces

Wetting Transitions of Condensed Droplets on Superhydrophobic Surfaces with Two-Tier Roughness

From Initial Nucleation to Cassie-Baxter State of Condensed Droplets on Nanotextured Superhydrophobic Surfaces.

The effect of surface texturing on the laser-induced wetting behavior of AlSi5 alloy on Ti6Al4V alloy