Abstract:Objective: Employ a novel testing method to assess Multi Directional Impact Protection System (MIPS) helmet technology on rotational velocity and acceleration during head impact. Methods: An optimization study was completed utilizing a 50th percentile male Hybrid III anthropomorphic test device (ATD). Helmets included expanded polystyrene foam (EPS) and two different MIPS helmets (MIPS 1, MIPS 2). A 24.38-m-long elevated track with rails and a motorized sled was utilized to replicate a fall from approximately 2.13 m. The sled was set to a speed of 20.92 kph, where a tripping mechanism induced rotation in the ATD from the sled and onto a sand surface. During impact of the ATD with the sand surface, head kinematics were measured using resultant acceleration (peak G's), duration of impact (ms), and rotational velocity (rad/s). Results: A total of three trials for each helmet did not demonstrate a significant difference between the EPS vs. MIPS 1 group with, peak (G's) for resultant acceleration (p = 0.100), duration (ms) for resultant acceleration, (p = 0.100), peak (G's) for rotational velocity, (p = 0.700), and duration (ms) for rotational velocity (p = 0.700). Similarly, the EPS vs. MIPS 2 testing demonstrated no significant differences between the MIPS 2 helmet compared to the EPS helmet, with resultant acceleration (p = 0.400), duration acceleration (p = 0.200), rotational velocity (p = 0.400) and duration velocity (p = 0.400). However, when the MIPS helmet data were pooled, and the EPS helmet data were compared, a statistically significant difference in the duration of acceleration was found (p = 0.048). Conclusions: Current testing uses a helmeted head form which is dropped or rolled from a prescribed height. These methods discount the loading placed on the neck and head through the angular momentum of the body. Our novel testing method did not find significant differences between the helmet types in diminishing peak rotational forces to the brain; however, our data suggests that MIPS helmet liners may reduce duration of impact. The reduction of acceleration duration could indicate less rotation of the neck, due to the dampening of these forces by the MIPS liners.

Evaluating protective helmet efficacy in work-related accident: A forensic biomechanical analysis of concussion risk from falling objects

Evaluating Head Impact Intensities and Accelerations Using Flexible Wearable Sensors for Traumatic Brain Injury Assessment

Finite element simulations of the head–brain responses to the top impacts of a construction helmet: Effects of the neck and body mass

The Construction and Validation of a Finite Element Human Head Model for Skull Fracture

Testing the shock protection performance of Type I construction helmets using impactors of different masses

Parameter optimization design of the helmet liner structure for mitigating traumatic brain injury under impact loading

Incorporating neck biomechanics in helmet testing: Evaluation of commercially available WaveCel helmets

Video analysis of head injury incidents in equestrian sports

Influence of Long-Term Use of American Football Helmets on Concussion Risk

A New Assessment of Bicycle Helmets: The Brain Injury Mitigation Effects of New Technologies in Oblique Impacts

A novel equestrian helmet testing method: helmet liner performance in highly realistic simulation

Numerical Reconstruction of Cyclist Impact Accidents: Can Helmets Protect the Head-Neck of Cyclists?

Evaluation of possible head injuries ensuing a cricket ball impact

Evaluation of a laboratory model of human head impact biomechanics

A novel bio-inspired helmet with auxetic lattice liners for mitigating traumatic brain injury

The Importance of the Scalp in Head Impact Kinematics

Peaks and Distributions of White Matter Tract-related Strains in Bicycle Helmeted Impacts: Implication for Helmet Ranking and Optimization

Effect of Structure and Wearing Modes on the Protective Performance of Industrial Safety Helmet

A Review of On-Field Investigations into the Biomechanics of Concussion in Football and Translation to Head Injury Mitigation Strategies

Full-face motorcycle helmet protection from facial impacts: an investigation using THOR dummy impacts and SIMon finite element head model

Evaluation of an Elastomeric Honeycomb Bicycle Helmet Design to Mitigate Head Kinematics in Oblique Impacts