Stigma toward psychosis and its formulation process: prejudice and discrimination against early stages of schizophrenia.

Yoko Baba,T. Nemoto,N. Tsujino,Taiju Yamaguchi,Naoyuki Katagiri,M. Mizuno

DOI: https://doi.org/10.1016/j.comppsych.2016.11.005

IF: 7.211

2017-02-01

Comprehensive Psychiatry

Abstract:

What problem does this paper attempt to address?

A Review of the Residual Stress Generation in Metal Additive Manufacturing: Analysis of Cause, Measurement, Effects, and Prevention

Nabin Bastola,Muhammad P. Jahan,Nithin Rangasamy,Chandra Sekhar Rakurty

DOI: https://doi.org/10.3390/mi14071480

IF: 3.4

2023-07-25

Micromachines

Abstract:Metal additive manufacturing (AM) is capable of producing complex parts, using a wide range of functional metals that are otherwise very difficult to make and involve multiple manufacturing processes. However, because of the involvement of thermal energy in the fabrication of metallic AM parts, residual stress remains one of the major concerns in metal AM. This residual stress has negative effects on part quality, dimensional accuracy, and part performance. This study aims to carry out a comprehensive review and analysis of different aspects of residual stress, including the causes and mechanisms behind the generation of residual stress during metal AM, the state-of-the-art measurement techniques for measuring residual stress, various factors influencing residual stress, its effect on part quality and performance, and ways of minimizing or overcoming residual stress in metal AM parts. Residual stress formation mechanisms vary, based on the layer-by-layer deposition mechanism of the 3D printing process. For example, the residual stress formation for wire-arc additive manufacturing is different from that of selective laser sintering, direct energy deposition, and powder bed fusion processes. Residual stress formation mechanisms also vary based on the scale (i.e., macro, micro, etc.) at which the printing is performed. In addition, there are correlations between printing parameters and the formation of residual stress. For example, the printing direction, layer thickness, internal structure, etc., influence both the formation mechanism and quantitative values of residual stress. The major effect residual stress has on the quality of a printed part is in the distortion of the part. In addition, the dimensional accuracy, surface finish, and fatigue performance of printed parts are influenced by residual stress. This review paper provides a qualitative and quantitative analysis of the formation, distribution, and evolution of residual stress for different metal AM processes. This paper also discusses and analyzes both in situ and ex situ measurement techniques for measuring residual stress. Microstructural evolution and its effect on the formation of residual stress are analyzed. Various pre- and post-processing techniques used to countermeasure residual stress are discussed in detail. Finally, this study aims to present both a qualitative and quantitative analysis of the existing data and techniques in the literature related to residual stress, as well as to provide a critical analysis and guidelines for future research directions, to prevent or overcome residual stress formation in metal AM processes.

chemistry, analytical,nanoscience & nanotechnology,instruments & instrumentation,physics, applied
Additive manufacturing: A review on 3 D printing of metals and study of residual stress, buckling load capacity of strut members

Pritam Anant Pidge,Harish Kumar

DOI: https://doi.org/10.1016/j.matpr.2019.12.012

2020-01-01

Materials Today: Proceedings

Abstract:Additive manufacturing is emerging technology in the growing industry for the production of parts and it can be used for repairing of parts also. Additive manufacturing is the best suitable name for 3 D printing as it prints the part layer by layer so additive. In additive manufacturing 3 D printing of plastics and metals can be done enormously with precise surface finish and feature quality as required. Focusing more on metal 3 D printing it is done with direct metal sintering, direct energy deposition and Metal binder jetting. The metal sintering process use powder bed with powder metal and laser selectively melts a flattened bed of powder which is done with roller with successive rolling of new layer on previous into desired shape before a new layer is pushed on top of the previous layer and successive scanning and lowering of powder bed until the CAD model is done. So melt back happening melting previous layer again due to solidifying the new layer on the earlier layer. This causes residual stresses because of the unique thermal cycle. This residual stress can lead to the failure of the printed part. This can be overcome by preheating of powder bed which will reduce such kind of problem. The printed part can be scanned for with Scanner dimensional accuracy. Much of the metal contracts after melting so this scanning will help for adjusting the size and dimensioning of the CAD model. The surface texture is also analyzed with the help of microscopes for doing comparison with conventional subtractive methods.

English Else
A Review of Residual Stress and Deformation Modeling for Metal Additive Manufacturing Processes

Asim Rashid,Aditya Gopaluni

DOI: https://doi.org/10.1016/j.cjmeam.2023.100102

2023-12-01

Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers

Abstract:A metal additive manufacturing process results in a nearly net-shaped fabrication of parts directly from digital data. A local heat source melts the deposited material, and a part is built layer-by-layer. Residual stress and deformation are critical issues experienced by additively manufactured parts. Modeling the additive manufacturing process provides important insights and can help determine an optimal build plan so as to minimize residual stress formation. Various approaches have been used for modeling of residual stresses, ranging from high-fidelity models to simplified models, for quicker results. This paper provides a state-of-the-art review of the approaches used to numerically model residual deformation and stresses in structures built using additive manufacturing. Furthermore, it describes the physical causes of residual-stress generation in an additively manufactured structure.
Evolution, Control, and Mitigation of Residual Stresses in Additively Manufactured Metallic Materials: A Review

Yang Liu,Jing Shi,Yachao Wang

DOI: https://doi.org/10.1002/adem.202300489

IF: 3.6

2023-10-08

Advanced Engineering Materials

Abstract:Powder bed fusion (PBF) and directed energy deposition (DED) are the two major types of metal additive manufacturing (AM) processes, in which significant residual stresses could be generated in the as‐deposited materials and in turn affect part quality and performance. Therefore, how to control and mitigate residual stress has been a most pressing challenge for metal AM. In this paper, we systematically review the significant efforts made in literature to address this challenge for both PBF and DED processes. The extensive survey covers the formation of residual stress in AM, influence of various AM process parameters, modeling techniques for predicting residual stresses, and post and in‐situ treatments for mitigating unfavorable residual stress distributions. More importantly, a critical analysis is provided to discuss the research gaps and opportunities, such that more exciting research will be stimulated to address the outstanding issues in this area, and improve the quality and service life of AM produced components. As a result, once being better equipped with residual stress control knowledge and tools, the industry will be more confident in adopting metal AM techniques. This article is protected by copyright. All rights reserved.

materials science, multidisciplinary
Review on residual stress in selective laser melting additive manufacturing of alloy parts

Ze-Chen Fang,Zhi-Lin Wu,Chen-Guang Huang,Chen-Wu Wu

DOI: https://doi.org/10.1016/j.optlastec.2020.106283

2020-09-01

Abstract:<p>The undesirable residual stress accumulated in the parts during the melting and solidification of the metal powder layer by layer retards the further application of the selective laser melting (SLM) process. This paper focuses on reviewing the recent illuminating achievements about physical modeling, experimental characterizing, and active adjusting of the residual stress in the parts fabricated by SLM. The advantages and disadvantages of the mainstream and emerging models or approaches are further analyzed. Based on the status and prospect of the relative techniques, a series of conceptual methods are discussed on mitigating residual stress to make some practical inspiration for developing a systematical residual stress balancing technique for SLM.</p>

optics,physics, applied
Metal additive-manufacturing process and residual stress modeling

Mustafa Megahed,Hans-Wilfried Mindt,Narcisse N’Dri,Hongzhi Duan,Olivier Desmaison

DOI: https://doi.org/10.1186/s40192-016-0047-2

2016-02-24

Integrating Materials and Manufacturing Innovation

Abstract:Additive manufacturing (AM), widely known as 3D printing, is a direct digital manufacturing process, where a component can be produced layer by layer from 3D digital data with no or minimal use of machining, molding, or casting. AM has developed rapidly in the last 10 years and has demonstrated significant potential in cost reduction of performance-critical components. This can be realized through improved design freedom, reduced material waste, and reduced post processing steps. Modeling AM processes not only provides important insight in competing physical phenomena that lead to final material properties and product quality but also provides the means to exploit the design space towards functional products and materials. The length- and timescales required to model AM processes and to predict the final workpiece characteristics are very challenging. Models must span length scales resolving powder particle diameters, the build chamber dimensions, and several hundreds or thousands of meters of heat source trajectories. Depending on the scan speed, the heat source interaction time with feedstock can be as short as a few microseconds, whereas the build time can span several hours or days depending on the size of the workpiece and the AM process used. Models also have to deal with multiple physical aspects such as heat transfer and phase changes as well as the evolution of the material properties and residual stresses throughout the build time. The modeling task is therefore a multi-scale, multi-physics endeavor calling for a complex interaction of multiple algorithms. This paper discusses models required to span the scope of AM processes with a particular focus towards predicting as-built material characteristics and residual stresses of the final build. Verification and validation examples are presented, the over-spanning goal is to provide an overview of currently available modeling tools and how they can contribute to maturing additive manufacturing.

materials science, multidisciplinary,engineering, manufacturing
Residual Stress Distribution in Selective Laser Melting of SS316L Parts

Harinadh Vemanaboina,Paolo Ferro,B. Sridhar Babu,Edison Gundabattini,Kaushik Kumar,Filippo Berto

DOI: https://doi.org/10.1155/2022/5687407

IF: 2.0981

2022-08-01

Advances in Materials Science and Engineering

Abstract:Additive manufacturing is one of the fastest-growing fields in materials engineering. This is because there is a new trend for custom, high-precision, and on-demand manufacturing. The undesired residual stress induced in the components during layer-by-layer melting and solidification of the metal powder is an important issue related to the selective laser melting (SLM) process that needs to be studied deeply. These stresses may impair mechanical performance and potentially result in premature failure. As a result, a thorough knowledge of residual stress is crucial for improved component dependability. By keeping constant process parameters, samples were produced with a difference in the scanning method. Results indicate that the defect-free parts are manufactured in all the four patterns used, and the self-balanced residual stresses are within the safe limits of yield strength.

materials science, multidisciplinary
Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review

Chang Ye,Chaoyi Zhang,Jingyi Zhao,Yalin Dong

DOI: https://doi.org/10.1007/s11665-021-06021-7

IF: 2.3

2021-07-26

Journal of Materials Engineering and Performance

Abstract:Additive manufacturing (AM) has attracted much attention due to its capability in building parts with complex geometries. Unfortunately, AM metals suffer from three major drawbacks, including high porosity, poor surface finish, and tensile residual stresses, all of which will significantly compromise the fatigue performance. These drawbacks present a major obstacle to the application of AM metals in industries that produce fatigue-sensitive components. Many post-processing methods, including heat treatment, hot isotropic pressing, laser shock peening, ultrasonic nanocrystal surface modification, advanced finishing and machining, and laser polishing, have been used to treat AM metals to decrease their porosity, improve the surface finish, and eliminate tensile residual stresses. As a result, significant improvement in fatigue performance has been observed. In this paper, the state of the art in utilizing post-processing techniques to treat AM metals and the effects of these treatments on the porosity, surface finish, and residual stresses of metal components and their resultant fatigue performance are reviewed.

materials science, multidisciplinary
Single cyclic nucleotide-activated ion channel activity in olfactory receptor cell soma membrane.

N. Suzuki

DOI: https://doi.org/10.1016/0921-8696(90)90013-S

Abstract:
Metal additive manufacturing: Technology, metallurgy and modelling

Shaun Cooke,Keivan Ahmadi,Stephanie Willerth,Rodney Herring

DOI: https://doi.org/10.1016/j.jmapro.2020.07.025

IF: 5.684

2020-09-01

Journal of Manufacturing Processes

Abstract:This paper provides a comprehensive review of metal additive manufacturing, a rapidly evolving field with innovative technologies and processes. The purpose of this review paper is to provide a complete picture of the current research on metal AM and its capabilities. An overview of metal AM and the current processing methods are provided, along with a brief introduction to the complex physics behind the melt pool formation. Common metal AM characteristic defects are discussed as well as the current metals and alloys that are commercially available. Furthermore, process optimization techniques and computational modelling methods are reviewed. Lastly, various post-processing methods to improve surface roughness, mechanical properties and dimensional precision are discussed. Although the library for printable alloys is increasing, there is still a need for alloy development outside of the commercial setting. Furthermore, there is currently not a complete numerical model of the AM process which is mainly due to the computational costs. Although metal AM is still in its infancy, the frequency and significance of new developments are driving AM to mainstream adoption.

engineering, manufacturing
[Outpatient chemotherapy for advanced lung cancer].

M. Okazaki,N. Katakami,C. Nishio,S. Fujita,E. Kaneshiro,T. Nishimura,A. Ikeda,T. Hasegawa,B. Umeda

2001-10-01

Abstract:We reviewed the records of outpatient chemotherapy for advanced lung cancer in our institution. Thirty-two patients received 122 courses of cisplatin-free chemotherapy as outpatient treatments. Before outpatient treatment, every patient received the first chemotherapy as an inpatient treatment and the dose of cytotoxic drugs was reduced accordingly when side effects were judged to be untolerable. Only 1 patient needed hospitalization because of pneumonia with grade IV neutropenia. The overall response included partial responses (PR) 18%, no change (NC) 55%, progressive disease (PR) 11% and the median survival from the start of outpatient chemotherapy was 384 days. The monthly average cost of medical care per inpatient was more than three times as high as that of outpatients. Cisplatin-free chemotherapy for advanced lung cancer should be given as outpatient treatment not only to maintain the quality of life of patients, but also to restrain the total cost of medical care and to use hospital beds efficiently.
Residual Stress Characterization of an Additively Manufactured Titanium Alloy

Ali Mustapha Alibe,A.A Janga,Ahmad Girgiri,I.M Alibe

DOI: https://doi.org/10.55041/ijsrem25885

2023-09-01

INTERANTIONAL JOURNAL OF SCIENTIFIC RESEARCH IN ENGINEERING AND MANAGEMENT

Abstract:Additive manufacturing (AM) has emerged as a revolutionary technology for producing complex and customized components, particularly in aerospace and medical industries, using materials like titanium alloys known for their exceptional strength-to-weight ratio. However, the inherent thermal gradients and rapid solidification processes during AM can introduce residual stresses in the manufactured parts, significantly affecting their mechanical properties and structural integrity. This study focuses on the comprehensive characterization of residual stresses in additively manufactured titanium alloy components, particularly on understanding the influence of various AM process parameters, post-processing techniques, and part geometries. We employ state-of-the-art semi-destructive techniques, incremental hole drilling and strain gauging to map and quantify the residual stress distribution within the fabricated parts. We elucidate the factors contributing to residual stress formation through carefully designed experiments and numerical simulations, including thermal history, cooling rates, and build orientation. The findings of this research not only advance our fundamental understanding of residual stress mechanisms in additively manufactured titanium alloys but also provide valuable insights for optimizing the AM process and post-processing steps to minimize residual stress-induced defects and enhance the reliability of components in critical applications. Ultimately, this work contributes to the broader goal of unlocking the full potential of additive manufacturing for high-performance engineering materials like titanium alloys.
Obtaining Metal Parts by Additive Manufacturing, as an Alternative to Traditional Manufacturing Methods – A Review

Lucian-Corneliu Dârlău

DOI: https://doi.org/10.2478/bipcm-2023-0005

2023-03-01

Bulletin of the Polytechnic Institute of Iași. Machine constructions Section

Abstract:Abstract The advantages of Additive Manufacturing (AM) over conventional manufacturing processes are incontestable: complex geometries of obtained parts, wide variety of materials (polymers, composites, low melting metal alloys) used, simple and cost-effective process. Material Extrusion (ME) (piston, filament or screw) is the most widespread AM technology. In this paper, a comparative analysis of different materials used in high reinforcement 3D printing is made. Thus, ceramic and metallic composites, composites with titanium particles, AISI M2 high speed steel powder and Nickel 625 alloy are presented. The conclusion of each study is that increasing powder concentration (up to 65%, by volume) increases parts density (up to 90%), improves sintering process, but narrows process parameters. A balance between raw material properties and processing parameters must be sought to obtain custom parts with optimal properties.
An overview of surface roughness enhancement of additively manufactured metal parts: a path towards removing the post-print bottleneck for complex geometries

Haniyeh Fayazfar,Javid Sharifi,Mohsen K. Keshavarz,Mazyar Ansari

DOI: https://doi.org/10.1007/s00170-023-10814-6

2023-01-13

Abstract:Since the advent of additive manufacturing (AM) (also called 3D-printing), substantial progress has been achieved in technological advances in the processes and micro/macro characteristics of the components. However, this rapidly evolving field is faced with some barriers to industrial adoption, especially in the case of metals processing. Poor surface quality and surface topography imperfections, which are inherent in metal AM, are among the main drawbacks hindering AM broad industrial adoption. This issue cannot be addressed only by AM process optimization due to the intrinsic complexity of the process. Therefore, effective surface post-treatment methods are required to enhance the surface quality of the final parts for both external and hard-to-reach internal surfaces. Considering the importance and urgent need for surface modification of AM metals, this review aims to provide a broad overview of the existing research endeavors as well as gaps and opportunities in the surface enhancement of AM metals, with a focus on solution-based approaches to improve surface roughness of complex metal 3D-printed parts with intricate surfaces and evaluate the effect of these approaches on the functional properties for end-use applications. Assessing the effectiveness of the surface modification techniques, the present paper further provides the research needs to fulfill the performance-impacting knowledge gap for AM industrial adoption and further expansion of surface treatment methodologies for improved surface finish of complex metal printed parts.

engineering, manufacturing,automation & control systems
Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method

Quoc-Phu Ma,Jakub Mesicek,Frantisek Fojtik,Jiri Hajnys,Pavel Krpec,Marek Pagac,Jana Petru

DOI: https://doi.org/10.3390/ma15176057

IF: 3.4

2022-09-02

Materials

Abstract:In metal 3D printing with Selective Laser Melting (SLM) technology, due to large thermal gradients, the residual stress (RS) distribution is complicated to predict and control. RS can distort the shape of the components, causing severe failures in fabrication or functionality. Thus, several research papers have attempted to quantify the RS by designing geometries that distort in a predictable manner, including the Bridge Curvature Method (BCM). Being different from the existing literature, this paper provides a new perspective of the RS build-up in aluminum parts produced with SLM using a combination of experiments and simulations. In particular, the bridge samples are printed with AlSi10Mg, of which the printing process and the RS distribution are experimentally assessed with the Hole Drilling Method (HDM) and simulated using ANSYS and Simufact Additive. Subsequently, on the basis of the findings, suggestions for improvements to the BCM are made. Throughout the assessment of BCM, readers can gain insights on how RS is built-up in metallic 3D-printed components, some available tools, and their suitability for RS prediction. These are essential for practitioners to improve the precision and functionality of SLM parts should any post-subtractive or additive manufacturing processes be employed.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,metallurgy & metallurgical engineering
The metallurgy and processing science of metal additive manufacturing

W. J. Sames,F. A. List,S. Pannala,R. R. Dehoff,S. S. Babu

DOI: https://doi.org/10.1080/09506608.2015.1116649

2016-03-07

International Materials Reviews

Abstract:Additive manufacturing (AM), widely known as 3D printing, is a method of manufacturing that forms parts from powder, wire or sheets in a process that proceeds layer by layer. Many techniques (using many different names) have been developed to accomplish this via melting or solid-state joining. In this review, these techniques for producing metal parts are explored, with a focus on the science of metal AM: processing defects, heat transfer, solidification, solid-state precipitation, mechanical properties and post-processing metallurgy. The various metal AM techniques are compared, with analysis of the strengths and limitations of each. Only a few alloys have been developed for commercial production, but recent efforts are presented as a path for the ongoing development of new materials for AM processes.

materials science, multidisciplinary
Review on the evolution and technology of State-of-the-Art metal additive manufacturing processes

S. Pratheesh Kumar,S. Elangovan,R. Mohanraj,J.R. Ramakrishna

DOI: https://doi.org/10.1016/j.matpr.2021.02.567

2021-01-01

Materials Today: Proceedings

Abstract:Nowadays, the requirements of customers undergo dynamic changes and industries are heading towards the manufacturing of customized end-user products, making market fluctuations extremely unpredictable. This demands the production industries to shift towards instantaneous product development strategies that can deliver products on the shortest lead time without compromise in the quality and accuracy. Direct metal deposition is one such evolving additive manufacturing (AM) technique that has found its application from rapid prototyping to production of real-time industrial components. In addition, the process is ideal for just-in-time manufacturing, producing parts-on-demand while offering the potential to reduce cost, energy consumption, and carbon footprint. The evolution of this advanced manufacturing technique had drastically reduced the manufacturing constraints and greatly improved the product versatility. This review provides insight into the evolution, current status, and challenges of metal additive manufacturing (MAM) techniques, starting from powder bed fusion and direct metal deposition. In addition to this, the review explores the variants of metal additive manufacturing with its process mechanism, merits, demerits, and applications. The efficiency of the processes is finally analysed using a time–cost triangle and the mechanical properties are comprehensively compared. The review will enhance the basic understanding of MAM and thus broaden the scope of research and development.

English Else
A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding

Chanun Suwanpreecha,Anchalee Manonukul

DOI: https://doi.org/10.3390/met12030429

IF: 2.695

2022-02-28

Metals

Abstract:Material extrusion additive manufacturing of metal (metal MEX), which is one of the 3D printing processes, has gained more interests because of its simplicity and economics. Metal MEX process is similar to the conventional metal injection moulding (MIM) process, consisting of feedstock preparation of metal powder and polymer binders, layer-by-layer 3D printing (metal MEX) or injection (MIM) to create green parts, debinding to remove the binders and sintering to create the consolidated metallic parts. Due to the recent rapid development of metal MEX, it is important to review current research work on this topic to further understand the critical process parameters and the related physical and mechanical properties of metal MEX parts relevant to further studies and real applications. In this review, the available literature is systematically summarised and concluded in terms of feedstock, printing, debinding and sintering. The processing-related physical and mechanical properties, i.e., solid loading vs. dimensional shrinkage maps, sintering temperature vs. relative sintered density maps, stress vs. elongation maps for the three main alloys (316L stainless steel, 17-4PH stainless steel and Ti-6Al-4V), are also discussed and compared with well-established MIM properties and MIM international standards to assess the current stage of metal MEX development.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling

G. Vastola,Gang Zhang,Qing-Xiang Pei,Yu Zhang

DOI: https://doi.org/10.1016/j.addma.2016.05.010

IF: 11

2016-01-01

Additive Manufacturing

Abstract:Minimizing the residual stress build-up in metal-based additive manufacturing plays a pivotal role in selecting a particular material and technique for making an industrial part. In beam-based additive manufacturing, although a great deal of effort has been made to minimize the residual stresses, it is still elusive how to do so by simply optimizing the manufacturing parameters, such as beam size, beam power, and scan speed. With reference to the Ti6Al4V alloy and manufacturing by electron beam melting, we perform systematic finite element modeling of one-pass scanning to study the effects of beam size, beam power density, beam scan speed, and chamber bed temperature on the magnitude and distribution of residual stresses. Our study elucidates both qualitative and quantitative features of the residual stress fields originated by these manufacturing parameters. Our findings can serve as useful guidelines for engineers and designers to deal with residual stress build-up during additive manufacturing of Ti6Al4V.
Residual Stresses in Wire Arc Additive Manufacturing Products and Their Measurement Techniques: A Systematic Review

Fakada Gurmesa,Hirpa Lemu,Yosef Adugna,Mesfin Harsibo

DOI: https://doi.org/10.3390/applmech5030025

2024-07-10

Applied Mechanics

Abstract:This literature review provides an in-depth exploration of the research conducted on residual stresses (RS) in Wire Arc Additive Manufacturing (WAAM) products, particularly focusing on how process parameters influence the phenomenon. The motivation of the study is the growing focus on WAAM technology and the observation that RS plays a crucial role in determining the mechanical behavior and structural integrity of WAAM components. Thus, the review is intended to provide a better understanding of the relationship between process parameters and RS to optimize the WAAM process and ensure the durability of the final products. It also summarizes key findings, measurement techniques, challenges, and future directions in this evolving field. The review also analyzes measurement techniques used to characterize RS in products fabricated by WAAM as a function of process parameters. Experimental measuring techniques and numerical analysis of RS to determine the impacts of RS in mechanical responses in products of WAAM were discussed. Experimental measuring techniques, such as X-ray diffraction, neutron diffraction (ND), contour and ND, digital image correlation, thermomechanical coupling and contour, and hole-drilling methods, along with numerical simulations like finite element analysis, are discussed to determine the impacts of RS on the mechanical responses of WAAM products. Additionally, it addresses the influence of thermal cycles, cooling rates, and deposition strategies on RS formation. The role of material properties, such as thermal conductivity and expansion coefficients, in RS development is also considered. By offering a comprehensive overview of current research trends and insights, this review serves as a valuable resource to guide future investigations, fostering the advancement of WAAM as a robust and efficient manufacturing technology. The review also underscores the importance of interdisciplinary approaches combining experimental and numerical methods to tackle the complex issues of RS in WAAM, aiming to enhance the performance and reliability of additively manufactured components.

Stigma toward psychosis and its formulation process: prejudice and discrimination against early stages of schizophrenia.

A Review of the Residual Stress Generation in Metal Additive Manufacturing: Analysis of Cause, Measurement, Effects, and Prevention

Additive manufacturing: A review on 3 D printing of metals and study of residual stress, buckling load capacity of strut members

A Review of Residual Stress and Deformation Modeling for Metal Additive Manufacturing Processes

Evolution, Control, and Mitigation of Residual Stresses in Additively Manufactured Metallic Materials: A Review

Review on residual stress in selective laser melting additive manufacturing of alloy parts

Metal additive-manufacturing process and residual stress modeling

Residual Stress Distribution in Selective Laser Melting of SS316L Parts

Effects of Post-processing on the Surface Finish, Porosity, Residual Stresses, and Fatigue Performance of Additive Manufactured Metals: A Review

Single cyclic nucleotide-activated ion channel activity in olfactory receptor cell soma membrane.

Metal additive manufacturing: Technology, metallurgy and modelling

[Outpatient chemotherapy for advanced lung cancer].

Residual Stress Characterization of an Additively Manufactured Titanium Alloy

Obtaining Metal Parts by Additive Manufacturing, as an Alternative to Traditional Manufacturing Methods – A Review

An overview of surface roughness enhancement of additively manufactured metal parts: a path towards removing the post-print bottleneck for complex geometries

Residual Stress Build-Up in Aluminum Parts Fabricated with SLM Technology Using the Bridge Curvature Method

The metallurgy and processing science of metal additive manufacturing

Review on the evolution and technology of State-of-the-Art metal additive manufacturing processes

A Review on Material Extrusion Additive Manufacturing of Metal and How It Compares with Metal Injection Moulding

Controlling of residual stress in additive manufacturing of Ti6Al4V by finite element modeling

Residual Stresses in Wire Arc Additive Manufacturing Products and Their Measurement Techniques: A Systematic Review