Abstract:The efficient utilization of biomass energy and the optimal operation of integrated renewable energy sources in virtual power plants have become critical issues to achieve carbon neutrality targets in rural areas. In the rural areas of Northeast China, a large amount of electricity can be generated from biomass. It is very important to develop biomass power generation equipment for this rural area. Due to the high thermal efficiency and its compact system without freezing process like water, CO2 thermal cycle is an appropriate option for this kind of power generation equipment. According to whether the flow is separated, CO2 cycles can be divided into the single flow layouts and split flow layouts. Compared to the single flow layouts, split flow layouts have higher efficiency, but more complex structures and lower heat transfer power per unit area. Considering the climatic characteristics of Heilongjiang Province and the seasonality of straw biomass utilization, this study proposes a modified scheme for the precompression transcritical CO2 cycle in the single flow layout to meet the simple structure requirement of the small power plants in cold areas like Northeast China. Through energy analysis, the study calculates the thermal efficiencies of the two cycles when the inlet pressure of the main compressor is 5 MPa, the turbine inlet temperature is 550 °C and the pressure ratios of the main compressor are in the range of 4.5-5.5. The optimal efficiency of the traditional precompression cycle is 43.55 % when the main compressor pressure ratio is 5.5, while the modified precompression cycle is 44.86 % when the pressure ratio is 5.0266. The modified precompression cycle has a higher efficiency than the traditional precompression cycle at a lower pressure ratio of the main compressor.

Performance analysis and prediction of a modified precompression transcritical CO2 power generation cycle