Abstract:Statement of problem: Failure of a fiber post and composite resin core often occurs at the junction between the 2 materials. This failure process requires better characterization. Purpose: The purpose of this study was to evaluate the effect of 2 chemical solvents, hydrogen peroxide and methylene chloride, on the shear bond strength of quartz and glass fiber posts to a composite resin. Material and methods: Twenty-four posts (3 +/-0.1 mm in length) were prepared for each quartz (LIGHT-POST (LP)) and glass fiber (Cytec blanco (CB)) post. Posts were horizontally embedded in acrylic resin with half of the post diameter exposed. The exposed surfaces were successively ground with 400-, 800-, and 1200-grit silicon carbide papers, to ensure uniform smoothness. The specimens were divided into 3 subgroups (n=8) representing different surface treatment techniques, including application of silane for 60 seconds (S), etching with hydrogen peroxide for 20 minutes (H), and etching with methylene chloride for 5 seconds (M). Silane-treated specimens served as controls. A dual-polymerized composite resin (Tetric EvoCeram) was placed in a polytetrafluoroethylene mold (30 x 2 mm) positioned upon the post specimens and polymerized for 20 seconds with a light-emitting diode (LED) polymerization unit. The specimens were stored in water at 37 degrees C for 24 hours. Shear bond strength values (MPa) of posts and composite resin cores were measured using a universal testing machine with a crosshead speed of 0.5 mm/min. Data were analyzed by 2-way analysis of variance (ANOVA). Post hoc Tukey intervals for comparison among the 2 post materials and 3 surface treatment techniques were calculated (alpha =.05). The effect of the chemical surface treatments on glass and quartz fiber post surfaces were examined with a scanning electron microscope (SEM). Results: There were significant differences between the shear bond strength for LP and CB (P<.001). For all groups, the application of H showed the highest bond strength values. There was no significant difference between the S and M groups (P>.05). The SEM observations demonstrated that the fiber post surfaces were modified after chemical surface treatment techniques. Conclusions: The surface treatment of quartz and glass fiber posts with hydrogen peroxide significantly enhanced the shear bond strength of the composite resin tested due to its ability to dissolve the epoxy resin matrix used in each post. The lowest bond strength was obtained with M and S groups. Application of methylene chloride to the fiber post surfaces for 5 seconds was not effective in increasing the shear bond strength of the fiber post to composite resin.

Effect of Different Surface Treatments on the Bonding Strength of Three Different Post Biomaterials to a Resin-Based Luting Agent

The effect of different surface treatments on the shear bond strength of luting cements to titanium

Surface treatments of a glass-fiber reinforced composite: Effect on the adhesion to a composite resin

Surface roughness and bond strength of zirconia posts to a resin cement after various surface pretreatments

The effect of surface treatments of tooth on the shear bond strength of direct composite veneers: An in vitro scanning electron microscope study

Influence of different surface treatment on bonding of metal and ceramic Orthodontic Brackets to CAD-CAM all ceramic materials

Evaluation of Effect by Different Surface Treatment Agents on Retention of Custom Made Cast Metal Post and Prefabricated Glass Fibre Post-A Comparative Study

Effect of various surface treatments on relining bond strength of CAD‐CAM denture base materials

Influence of Surface Pretreatment on the Bond Strength of a Resin Luting Cement to Saliva-contaminated Enamel and Dentin

The Effect of Different Combinations of Surface Treatments and Bonding Agents on the Shear Bond Strength Between Titanium Alloy and Lithium Disilicate Glass-Ceramic

Effects of chemical surface treatments of quartz and glass fiber posts on the retention of a composite resin

The Effect of Bonding Surface Design on Shear Bond Strength of 3D-Printed Orthodontic Attachments

Effect of surface treatments and bonding type on elemental composition and bond strength of dentin

Influence of surface treatment on repair bond strength of CAD/CAM long-term provisional restorative materials: an in vitro study

Improving the bonding stability between resin cements and zirconia-based ceramic using different surface treatments

Investigating the impact of surface treatments on tensile bond strength between pediatric prefabricated zirconia crowns and primary maxillary incisors with various types of luting cement: an in vitro study

Effect of Different Surface Treatment Methods on the Shear Bond Strength of Resin Composite/Zirconia for Intra-oral Repair of Zirconia Restorations

Effects of pretreatment in post space on the bonding strength of self-adhesive resin cement to fiber posts

Effect of Bonding Agents on the Shear Bond Strength of Tooth-colored Restorative Materials to Dentin: An In Vitro Study

Evaluation of the Effect of Different Surface Treatments on Luting CAD/CAM Composite Resin Overlay Workpieces

Exploring Zirconia Adhesion: Pre and Postsintering Physical Surface Treatment, Chemical Treatment, and Cement Interactions