[Relation between sensitivity to methylphenidate and predisposition to catatonia in rats].

V. Kolpakov,N. Barykina,I. Chepkasov

Abstract:

What problem does this paper attempt to address?

An analytical review on revamping plastic waste management: exploring recycling, biodegradation, and the growing role of biobased plastics

Jayana Rajvanshi,Monika Sogani,Georgios Tziouvaras,Anu Kumar,Zainab Syed,Kumar Sonu,Nishan Sen Gupta,Himanshi Sen

DOI: https://doi.org/10.1007/s11356-024-33333-7

IF: 5.8

2024-04-18

Environmental Science and Pollution Research

Abstract:Globally, 90% of plastics are synthetic, made up of crude oil, natural gas, and coal. Even though plastic is extremely useful in our lives, its excessive use and mismanaged disposal are negatively affecting the ecosystem. The review highlights that the recycling process plays a critical role in controlling the problem of plastic pollution. Although plastic recycling is the most common approach used for managing plastic waste, only 2% of the total plastic waste enters the closed-loop system. However, the review suggests that along with recycling, cost-effective and environmentally friendly plastic approaches can synergistically help to control this increasing problem of plastic waste accumulation. The review further discusses the consequences of plastic pollution on humans and the environment. In particular, the review focuses on biocatalytic and bioengineering tools for the degradation of polyethylene terephthalate (PET), one of the major contributors to plastic waste in landfills and oceans. Moreover, the review presents biobased and biodegradable materials, derived from renewable feedstocks, as an alternative to petroleum-based plastics along with their complete end-of-life options. Overall, this review analyzes the current scenario of the plastic industry, from plastic production to waste generation and management, loopholes and challenges in the current management strategies, and possible solutions like recycling, biodegradation, and biobased plastics.

environmental sciences
Challenges and Strategies for Bio-Based and Biodegradable Plastic Waste Management in Europe

Žaneta Stasiškienė,Jelena Barbir,Lina Draudvilienė,Zhi Kai Chong,Kerstin Kuchta,Viktoria Voronova,Walter Leal Filho

DOI: https://doi.org/10.3390/su142416476

IF: 3.9

2022-12-09

Sustainability

Abstract:In recent years, an increasing trend towards replacement of conventional fossil-based plastics with bio-based plastics was noticed, i.e., production of plastics partly or fully made from biomass is rapidly expanding. Currently, bio-based and biodegradable plastics have a very small market size, approximately only 1% of all plastics produced. However, the forecast of the global bioplastics production capacities predicts an increase from approximately 2.417 million tonnes in 2021 to approximately 7.593 million tonnes in 2026, more than three times the current capacity. Therefore, it is necessary to assess the challenges and identify the barriers for bio-based and biodegradable plastics for waste management and to evaluate the effectiveness of current plastic waste management strategies for the efficient waste management of bio-based and biodegradable plastics. The main barriers and motivators of the biodegradable and biodegradable plastics market that have been identified include macroeconomic factors, regulatory factors, technological factors, and social factors. The bio-based and biodegradable plastics have to be separately collected and treated under mostly controlled, regulated conditions. However, currently, there are no legal provisions providing for the separate collection of bio-based plastics, leading to their disposal with either hazardous waste, conventional plastics, or municipal waste. Since the effective plastic waste management strategy relates to good performance in each step of the waste management process, bio-based and biodegradable plastic waste management could, therefore, be based on an effective strategy for the management of plastic waste. However, there is a need for standardizing waste collection systems and creating a harmonized waste collection infrastructure, which would lead to effective sorting of bio-based plastic waste.

environmental sciences,environmental studies,green & sustainable science & technology
Management of Environmental Plastic Pollution: a Comparison of Existing Strategies and Emerging Solutions from Nature

Rebecca Amy Dunn,Natalie Ann Welden

DOI: https://doi.org/10.1007/s11270-023-06190-2

2023-03-14

Abstract:The recalcitrance of modern plastics is a key driver of the accretion of plastics in both waste management streams and the environment. As a result, the management of plastic waste has become a focal point of both research and public policy. The following review summarises the effectiveness of widespread approaches to plastic management, before exploring recent developments in the use of both naturally derived products and plastic-degrading organisms to reduce the burden of plastic wastes, including the potential value of symbiotic relationships between plastic-degrading organisms in the biodegradation of plastics in the environment. To date, plastic management strategies have typically focused on interventions to influence both plastic production and consumer behaviour, improvements in effective waste management systems and increased circularity of materials, and changes to the product design to increase the lifespan of the product and its suitability for preferred waste streams. However, the relative success of these measures has been mixed. Complementary to these established approaches is the increasing exploitation of biological and biochemical processes and natural products, including the identification of organisms and enzymes which are able to biodegrade different plastics at meaningful rates. This recent research frequently focuses on microbes from soil and marine environments, identifying numerous enzymes capable of acting on polymers or specific functional groups. While questions remain as to their effectiveness outside of laboratory conditions, the distribution of identified species and their apparent effectiveness indicates the potential benefits of these microbes both individually or in symbiosis with an appropriate host species.

environmental sciences,water resources,meteorology & atmospheric sciences
Integrated approaches for plastic waste management

Rajkumar D Kherdekar,Avinash B Ade

DOI: https://doi.org/10.3389/fmicb.2024.1426509

2024-09-26

Abstract:Plastic pollution is the challenging problem of the world due to usage of plastic in daily life. Plastic is essential for packaging food and other goods and utensils to avoid the risk of microbial attack. Due to its hydrophobic nature, it is used for wrapping as laminates or packaging liquid substances in pouches and sachets. The tensile strength of the plastic is more therefore it is used for manufacturing carrying bags that can bear heavy loads. Plastic is available in various forms as per the requirements in our daily life. Annually millions to trillions of polyethene carry bags are being manufactured and utilized throughout the world. The plastic requires millions of years for natural degradation. The physical and chemical processes are able to degrade plastic material at the meager level by 200 to 500 years in natural conditions. Many industries focus on recycling of plastic. Biodegradation is a comparatively slow and cheaper process that involves microbes. To dispose of plastic completely there is a need of an integrated process in which all the possible methods of disposal are involved and used sustainably so that minimum depletion occurs to the livestock and the environment. In the current review, we could try to emphasize the intricate nature of plastic polymers, pollution caused by it and possible mitigation strategies for plastic waste management.
Revitalizing plastic wastes employing bio-circular-green economy principles for carbon neutrality

Aishwarya Rani,Suraj Negi,Chihhao Fan,Su Shiung Lam,Hyunook Kim,Shu-Yuan Pan

DOI: https://doi.org/10.1016/j.jhazmat.2024.134394

2024-07-05

Abstract:The use of plastics has become deeply ingrained in our society, and there are no indications that its prevalence will decrease in the foreseeable future. This article provides a comprehensive overview of the global plastic waste disposal landscape, examining it through regional perspectives, various management technologies (dumping or landfilling, incineration, and reuse and recycling), and across different sectors including agriculture and food, textile, tourism, and healthcare. Notably, this study compiles the findings on life-cycle carbon footprints associated with various plastic waste management practices as documented in the literature. Employing the bio-circular-green economy model, we advocate for the adoption of streamlined and sustainable approaches to plastic management. Unique management measures are also discussed including the utilization of bioplastics combined with smart and efficient collection processes that facilitate recycling, industrial composting, or anaerobic digestion. Moreover, the integration of advanced recycling methods for conventional plastics with renewable energy, the establishment of plastic tax and credits, and the establishment of extended producer responsibility are reviewed. The success of these initiatives relies on collaboration and support from peers, industries, and consumers, ultimately contributing to informed decision-making and fostering sustainable practices in plastic waste management.
Critical Review on the Progress of Plastic Bioupcycling Technology as a Potential Solution for Sustainable Plastic Waste Management

Passanun Lomwongsopon,Cristiano Varrone

DOI: https://doi.org/10.3390/polym14224996

IF: 5

2022-11-18

Polymers

Abstract:Plastic production worldwide has doubled in the last two decades and is expected to reach a four-fold increase by 2050. The durability of plastic makes them a perfect material for many applications, but it is also a key limitation to their end-of-life management. The current plastic lifecycle is far from circular, with only 13% being collected for recycling and 9% being successfully recycled, indicating the failure of current recycling technology. The remaining plastic waste streams are thus incinerated, landfilled, or worse, mismanaged, leading to them leaking into the environment. To promote plastic circularity, keeping material in the loop is a priority and represents a more sustainable solution. This can be achieved through the reuse of plastic items, or by using plastic waste as a resource for new materials, instead of discarding them as waste. As the discovery of plastic-degrading/utilizing microorganisms and enzymes has been extensively reported recently, the possibility of developing biological plastic upcycling processes is opening up. An increasing amount of studies have investigated the use of plastic as a carbon source for biotechnological processes to produce high-value compounds such as bioplastics, biochemicals, and biosurfactants. In the current review, the advancements in fossil-based plastic bio- and thermochemical upcycling technologies are presented and critically discussed. In particular, we highlight the developed (bio)depolymerization coupled with bioconversion/fermentation processes to obtain industrially valuable products. This review is expected to contribute to the future development and scale-up of effective plastic bioupcycling processes that can act as a drive to increase waste removal from the environment and valorize post-consumer plastic streams, thus accelerating the implementation of a circular (plastic) economy.

polymer science
Exploring biodegradable alternatives: microorganism-mediated plastic degradation and environmental policies for sustainable plastic management

Garcia Simão, Rita de Cássia,Rocha, Paula Maria Carneiro,Martins, Júlia Thays Kava,Turkiewicz, Maurício,Plewka, Jacqueline,da-Conceição Silva, José Luis,Maller, Alexandre,Kadowaki, Marina Kimiko

DOI: https://doi.org/10.1007/s00203-024-04170-6

IF: 2.667

2024-11-06

Archives of Microbiology

Abstract:Plastics offer versatility, durability and low production costs, but they also pose environmental and health risks due to improper disposal, accumulation in water bodies, low recycling rates and temporal action that causes physicochemical changes in plastics and the release of toxic products to animal health and nature. Some microorganisms may play crucial roles in improving plastic waste management in the future. Cunningamella echinulata has been identified as a promising candidate that remains viable for long periods and produces a cutinase that is capable of degrading plastic. Other recent approaches involving the use of microorganisms are discussed in this review. However, there does not seem to be a single science that is efficient or most appropriate for solving the problem of plastic pollution on the planet at present. Regulations, especially the implementation of different laws that address the entire plastic cycle in different countries, such as Brazil, the USA, China and the European Union, play important roles in the management of this waste and can contribute to reducing this problem. In the context of the transversality of the information compiled here, the current limitations are discussed, and an effective plan is proposed to reduce plastic pollution. Although it is challenging, it involves implementing legislation, promoting sustainable alternatives, improving collection and recycling systems, encouraging reuse, supporting research and technological innovation, promoting corporate responsibility, collaborating globally, raising public awareness, optimizing waste management and, above all, continuously monitoring the progress of actions based on measurable metrics.

microbiology
Synthesis and commercialization of bioplastics: Organic waste as a sustainable feedstock

Anjaly P Thomas,Vara Prasad Kasa,Brajesh Kumar Dubey,Ramkrishna Sen,Ajit K Sarmah

DOI: https://doi.org/10.1016/j.scitotenv.2023.167243

2023-12-15

Abstract:Substituting synthetic plastics with bioplastics, primarily due to their inherent biodegradable properties, represents a highly effective strategy to address the current global issue of plastic waste accumulation in the environment. Advances in bioplastic research have led to the development of materials with improved properties, enabling their use in a wide range of applications in major commercial sectors. Bioplastics are derived from various natural sources such as plants, animals, and microorganisms. Polyhydroxyalkanoate (PHA), a biopolymer synthesized by bacteria through microbial fermentation, exhibits physicochemical and mechanical characteristics comparable to those of synthetic plastics. In response to the growing demand for these environmentally friendly plastics, researchers are actively investigating various cleaner production methods, including modification or derivatization of existing molecules for enhanced properties and new-generation applications to expand their market share in the coming decades. By 2026, the commercial manufacturing capacity of bioplastics is projected to reach 7.6 million tonnes, with Europe currently holding a significant market share of 43.5 %. Bioplastics are predominantly utilized in the packaging industry, indicating a strong focus of their application in the sector. With the anticipated rise in bioplastic waste volume over the next few decades, it is crucial to comprehend their fate in various environments to evaluate the overall environmental impact. Ensuring their complete biodegradation involves optimizing waste management strategies and appropriate disposal within these facilities. Future research efforts should prioritize exploration of their end-of-life management and toxicity assessment of degradation products. These efforts are crucial to ensure the economic viability and environmental sustainability of bioplastics as alternatives to synthetic plastics.
Operative therapy of gallbladder disease in patients with cystic fibrosis.

C. Snyder,K. Ferrell,D. Saltzman,W. Warwick,A. Leonard

DOI: https://doi.org/10.1016/0002-9610(89)90698-3

1989-06-01

Abstract:
Waste to energy: Trending key challenges and current technologies in waste plastic management

Sai Sree Varsha Vuppaladadiyam,Arun K. Vuppaladadiyam,Abhisek Sahoo,Ajay Urgunde,S. Murugavelh,Vít Šrámek,Michael Pohořelý,Lukáš Trakal,Sankar Bhattacharya,Ajit K. Sarmah,Kalpit Shah,Kamal K. Pant

DOI: https://doi.org/10.1016/j.scitotenv.2023.169436

IF: 9.8

2024-01-06

The Science of The Total Environment

Abstract:Due to the 'forever' degrading nature of plastic waste, plastic waste management is often complicated. The applications of plastic are ubiquitous and inevitable in many scenarios. Current global waste plastics production is ca. 3.5 MMT per year, and with the current trend, plastic waste production will reach 25,000 MMT by 2040. However, the rapid growth in plastic manufacture and the material's inherent nature resulted in the accumulation of a vast amount of plastic garbage. The current recycling rate is <10 %, while the large volumes of discarded plastic waste cause environmental and ecological problems. Recycling rates for plastic vary widely by region and type of plastic. In some developed countries, the recycling rate for plastics is around 20–30 %, while in many developing nations, it is much lower. These statistics highlight the magnitude of the plastic waste problem and the urgent need for comprehensive strategies to manage plastic waste more effectively and reduce its impact on the environment. This review critically analyses past studies on the essential and efficient techniques for turning plastic trash into treasure. Additionally, an attempt has been made to provide a comprehensive understanding of the plastic upcycling process, the 3Rs policy, and the life-cycle assessment (LCA) of plastic conversion. The review advocates pyrolysis as one of the most promising methods of turning plastic trash into valuable chemicals. In addition, plastic waste management can be severely impacted due to uncontrollable events, such as Covid 19 pandemic. Recycling and chemical upcycling can certainly bring value to the end-of-life plastic. However, the LCA analysis indicated there is still a huge scope for innovation in chemical upcycling area compared to mechanical recycling. The formulation of policies and heightened public participation could play a pivotal role in reducing the environmental repercussions of plastic waste and facilitating a shift towards a more sustainable future.

environmental sciences
Modeling of a low-loss spot-size converter for hollow waveguides with sub-wavelength air core

Y. Sakurai,F. Koyama

DOI: https://doi.org/10.1587/elex.1.115

IEICE Electronics Express

Abstract:We propose the integration of a tapered spot-size converter for coupling between a narrow air-core hollow waveguide and a single-mode fiber (SMF). The linear taper waveguide consisting of SiO2 is integrated with a hollow waveguide composed of highly reflective multilayer mirrors. Light is guided with total internal reflections at a SiO2 taper surface and the multiple reflections in the multilayer mirror. The core thickness of a taper SiO2 waveguide is linearly changed from 15µm to 0.6µm. The modeling result shows a coupling loss of less than 1dB between a SMF and a hollow waveguide with an air-core thickness of 1µm. A taper waveguide-induced loss is less than 0.1dB for a two-dimensional linear taper waveguide with a length of less than 1mm. Using the proposed structure, we can expect the dramatic reduction in coupling losses by 10dB. The device structure can be formed by fully planar fabrication processes based on lithography, etching and coating. The proposed spot-size converter enables us to achieve a large tunability of over 10% in propagation constant in hollow waveguides with a variable air-core.
Biodegradable plastics – Where to throw? A life cycle assessment of waste collection and management pathways in Austria

Namrata Mhaddolkar,Concetta Lodato,Alexia Tischberger-Aldrian,Daniel Vollprecht,Thomas Fruergaard Astrup

DOI: https://doi.org/10.1016/j.wasman.2024.10.018

IF: 8.816

2024-10-31

Waste Management

Abstract:The current waste management systems are struggling to optimally handle biodegradable plastics (BDPs) and are facing numerous challenges; one of which is the consumer confusion about how to best source-segregate BDPs. Based on an environmental life-cycle assessment, this study investigated the consequences of collecting BDPs in one of three waste streams (packaging waste, biowaste, and residual waste) in Austria. Collecting BDPs as (i) packaging waste resulted in incineration (SP1) or mechanical recycling (SP2), (ii) biowaste resulted in composting (SB1) or anaerobic digestion (AD) (SB2), and (iii) residual waste in incineration (SR1). SP2 performed best in most of the 16 investigated impact categories (ICs). Three scenario analyses demonstrated that (i) utilisation of BDPs as an alternative fuel for process heat substitution yielded more environmental benefits than incineration in SP1 and SP2, (ii) adding a material recovery facility (MRF) with AD increased the environmental load for SB2, while (iii) the energy scenario with zero electricity imports plus heat from biomass performed best for most alternative pathways across the 16 ICs. Eight technology parameters (out of 97) were identified as most relevant for the results based on data quality, sensitivity ratio, and analytical uncertainty; they were related to waste incineration, MRF, recycling facility, compost- and AD processes. Overall, mechanical recycling emerged as the most favourable option which is aligned with the waste-hierarchy mentioned in the European Union Waste Framework Directive. However, effective mechanical recycling of BDPs requires (i) a 'sufficient' waste amount, (ii) a market for recyclates, and (iii) relevant mechanical recycling infrastructure.

environmental sciences,engineering, environmental
Practical ways to recycle plastic: current status and future aspects

DOI: https://doi.org/10.1007/s10163-023-01611-0

2023-02-17

Journal of Material Cycles and Waste Management

Abstract:With sky-rocketing demand and unrestricted global production, plastics have become an inseparable part of daily human life and the circular economy at large. Notwithstanding, it is crucial to consider that they lead to substantial economic losses, disrupt the ecological equilibrium, and cause environmental pollution. In this regard, several strategies have been employed in the past, such as recycling techniques, waste management systems, extended producer responsibility, reduction of incineration, plastic prohibition, and globular thinking. These methods work toward the more sustainable usage of plastics in the future, but so far, none have scaled up to the industries' growing demands. It also reflects the current state of the art of these methods concerning the status of scientific research and gap areas in the recycling pathways. Chemical recycling seems to be one of the most efficient techniques, as it is less time consuming and the least waste is generated, but the requirement of efficient sorting makes it time consuming. While other methods generate waste and are comparatively more time consuming. Thus, each recycling method has its limitations, indicating that much work is needed to tackle the growing problem of plastic pollution. In addition, in the context of the present drawbacks of the methods, this review discusses a concomitant solution to the problem of plastic pollution via sustainable development by offering an alternative to fossil fuel-based plastic materials, i.e., biodegradable plastics.

environmental sciences
Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy

Rumana Hossain,Md Tasbirul Islam,Riya Shanker,Debishree Khan,Katherine Elizabeth Sarah Locock,Anirban Ghose,Heinz Schandl,Rita Dhodapkar,Veena Sahajwalla

DOI: https://doi.org/10.3390/su14084425

IF: 3.9

2022-04-08

Sustainability

Abstract:Plastic waste (PW) is one of the most rapid-growing waste streams in municipal solid waste all over the world. India has become a global player in the plastic value chain. Despite low consumption, domestic generation and imports create a significant burden on the overall waste management system, which requires in-depth understanding of the scenario and pathways that can mitigate the crisis. Although Indian researchers have widely researched technology-related issues in academic papers, a substantial knowledge gap exists in understanding the problem’s depth and possible solutions. This review article focuses on current plastic production, consumption, and waste generation in India. This review article mainly analyzes data and information regarding Indian PW management and highlights some critical issues such as reverse supply chain, effective PW management, source-specific recovery, and PW rules in India. Comprehensively, this review will help to identify implementable strategies for policymakers and research opportunities for future researchers in holistic PW management and recycling in India, focusing on the circular economy and sustainable development goals.

environmental sciences,environmental studies,green & sustainable science & technology
Current advances, challenges and strategies for enhancing the biodegradation of plastic waste

Yuehui He,Xilong Deng,Lei Jiang,Lijuan Hao,Yong Shi,Mingsheng Lyu,Lei Zhang,Shujun Wang

DOI: https://doi.org/10.1016/j.scitotenv.2023.167850

IF: 9.8

2023-10-18

The Science of The Total Environment

Abstract:Due to its highly recalcitrant nature, the growing accumulation of plastic waste is becoming an urgent global problem. Biodegradation is one of the best possible approaches for the treatment of plastic waste in an environmentally friendly manner, but our current knowledge on the underlying mechanisms, as well as strategies for the development and enhancement of plastic biodegradation are still limited. This review aims to provide an updated and comprehensive overview of current research on plastic waste biodegradation, focusing on enhancement strategies with ongoing research significance, including the mining of highly efficient plastic-degrading microorganisms/enzymes, utilization of synergistic additives, novel pretreatment approaches, modification via molecular engineering, and construction of bacterial/enzyme consortia systems. Studying these strategies can (i) enrich the high-performance microbial/enzymes toolbox for plastic degradation, (ii) provide methods for recycling and upgrading plastics, as well as (iii) enable further molecular modification and functional optimization of plastic-degrading enzymes to realize economically viable biodegradation of plastics. To the best of our knowledge, this is the first review to discuss in detail strategies to enhance biodegradation of plastics. Finally, some recommendations for future research on plastic biodegradation are listed, hoping to provide the best direction for tackling the plastic waste dilemma in the future.

environmental sciences
Environmental degradation of ordinary plastic wastes: a review on present awareness and disposal prospects

Vinima Gambhir,Manita Deepak Shah,Nidhi Sharma,Shri Bhagwan

DOI: https://doi.org/10.31893/multirev.2023ss026

2024-03-24

Multidisciplinary Reviews

Abstract:Plastic waste has emerged as a major global environmental challenge, posing detrimental impacts on ecosystems and human health. This review critically analyzes the existing level of awareness about the adverse effects of plastic waste on the environment, encompassing issues such as land and marine pollution, micro-plastic contamination, and the disruption of ecological balance. The issue of plastic garbage accumulation has gained significant recognition in recent times as an effective environmental problem with global implications. It has been observed to affect various living forms, natural ecosystems, and the economy. Given the current threat, it is imperative to prioritize exploring alternative alternatives, such as biodegradation, as a substitute for conventional disposal methods. There is a shortage of information regarding the processes and efficacy of plastic biodegradation. The objective of this review is to examine the adverse environmental impacts resulting from the accumulation commonly used the materials polyethylene, polypropylene, polyester, polyvinyl chlorides, polyethylene terse and polyol trash, which are examples of waste from plastics. Additionally, this review aims to assess the potential for degradation of these plastics through both abiotic and biotic processes. Moreover, a comprehensive analysis is conducted on the capacity of several microbial species to degrade these polymers. The current study examines the involvement of invertebrates namely insects, in the process of plastic degradation, emphasizing the significant potential they possess in shaping future outcomes.
Plastic waste as a significant threat to environment – a systematic literature review

Muhammad Ilyas,Waqas Ahmad,Hizbullah Khan,Saeeda Yousaf,Kifayatullah Khan,Shah Nazir

DOI: https://doi.org/10.1515/reveh-2017-0035

2018-09-06

Reviews on Environmental Health

Abstract:Abstract Context Materials which exceed the balance of their production and destruction lead to the deterioration in the environment. Plastic is one such material which poses a big threat to the environment. A huge amount of plastic is produced and dumped into the environment which does not readily degrade naturally. In this paper, we address the organization of a large body of literature published on the management of waste plastics being the most challenging issue of the modern world. Objectives To address the issue of the management of waste plastics, there is a dire need to organize the literature published in this field. This paper presents a systematic literature review on plastic waste, its fate and biodegradation in the environment. The objective is to make conclusions on possible practical techniques to lessen the effects of plastic waste on the environment. Method A systematic literature review protocol was followed for conducting the present study [Kitchenham B, Brereton OP, Budgen D, Turner M, Bailey J, Linkman S. Systematic literature reviews in software engineering – A systematic literature review. Inf Softw Technol 2009;51(1):7–15.]. A predefined set of book sections, conference proceedings and high-quality journal publications during the years 1999 to September 2017 were used for data collection. Results One hundred and fifty-three primary studies are selected, based on predefined exclusion, inclusion and quality criteria. These studies will help to identify the fate of different waste plastics, their impact and management and the disposal techniques frequently used. The study also identifies a number of significant techniques and measures for the conversion of waste plastic materials into useful products. Conclusion Five fundamental strategies are used for the handling of plastic waste. These strategies include: recycling, depositing in landfill, incineration, microbial degradation and conversion into useful materials. All of these methods have their own limitations, due to which there is need to explore the studies for optimum solutions of the management of plastics waste.

public, environmental & occupational health,environmental sciences
Bioplastic production in terms of life cycle assessment: A state-of-the-art review

Sameh Samir Ali,Tamer Elsamahy,Rania Al-Tohamy,Fanghua Li,Michael Kornaros,Antonio Zuorro,Daochen Zhu,Jianzhong Sun,Esraa A. Abdelkarim

DOI: https://doi.org/10.1016/j.ese.2023.100254

IF: 9.371

2023-07-01

Environmental Science and Ecotechnology

Abstract:The current transition to sustainability and the circular economy can be viewed as a socio-technical response to environmental impacts and the need to enhance the overall performance of the linear production and consumption paradigm. The concept of biowaste refineries as a feasible alternative to petroleum refineries has gained popularity. Biowaste has become an important raw material source for developing bioproducts and biofuels. Therefore, effective environmental biowaste management systems for the production of bioproducts and biofuels are crucial and can be employed as pillars of a circular economy. Bioplastics, typically plastics manufactured from bio-based polymers, stand to contribute to more sustainable commercial plastic life cycles as part of a circular economy in which virgin polymers are made from renewable or recycled raw materials. Various frameworks and strategies are utilized to model and illustrate additional patterns in fossil fuel and bioplastic feedstock prices for various governments' long-term policies. This review paper highlights the harmful impacts of fossil-based plastic on the environment and human health, as well as the mass need for eco-friendly alternatives such as biodegradable bioplastics. Utilizing new types of bioplastics derived from renewable resources (e.g., biowastes, agricultural wastes, or microalgae) and choosing the appropriate end-of-life option (e.g., anaerobic digestion) may be the right direction to ensure the sustainability of bioplastic production. Clear regulation and financial incentives are still required to scale from niche polymers to large-scale bioplastic market applications with a truly sustainable impact.

environmental sciences,green & sustainable science & technology
Biobased, biodegradable and compostable plastics: chemical nature, biodegradation pathways and environmental strategy

Sabzoi Nizamuddin,Chengrong Chen

DOI: https://doi.org/10.1007/s11356-023-31689-w

IF: 5.8

2024-01-04

Environmental Science and Pollution Research

Abstract:Increasing pollution of plastic waste is one of the major global environmental threats, deteriorating our land, water and air. The shift towards biobased, biodegradable and compostable plastics is considered a green alternative to petroleum-based plastic due to its renewable source or biodegradability. However, there is a misconception about biodegradable plastics and their degradability and behaviour after service life. Biobased, biodegradable and compostable plastics offer various benefits such as less carbon footprint, energy efficiency, independence and eco-safety. On the other hand, there are some disadvantages such as higher cost, limited recycling, misuse of terms and lack of legislation. Also, there is an urgent need for comparable international standard methods to define these materials as biodegradable material, or biocompostable material. There are some standards currently available, however, an in-depth detail and explanation of these standards is still missing. This review outlines the basic definition and chemical structure of biobased, biodegradable and compostable plastics; describes the degradation pathways of biodegradable and compostable plastics; and summarises current key applications of these materials together with possible future applications in different industries. Finally, strategies are developed for minimising the environmental impacts and the need for future research is proposed.

environmental sciences
Emission analysis of Sm(3+) and Dy(3+):MgLaLiSi(2)O(7) powder phosphors.

G. S. R. Raju,S. Buddhudu

Abstract:This paper reports on the structural and emission properties of newly synthesized Sm(3+) and Dy(3+):MgLaLiSi(2)O(7) powder phosphors based on the measurement of their XRD, SEM, FTIR and photoluminescence spectra. Emission spectra of the Sm(3+):MgLaLiSi(2)O(7) phosphors with lambda(exci)=402 nm ((6)H(5/2)-->(4)F(7/2)) and Dy(3+):MgLaLiSi(2)O(7) phosphors with lambda(exci)=385 nm ((6)H(15/2)-->(4)I(13/2)) have been analyzed. Emission mechanisms of these phosphors have also been explained.

[Relation between sensitivity to methylphenidate and predisposition to catatonia in rats].

An analytical review on revamping plastic waste management: exploring recycling, biodegradation, and the growing role of biobased plastics

Challenges and Strategies for Bio-Based and Biodegradable Plastic Waste Management in Europe

Management of Environmental Plastic Pollution: a Comparison of Existing Strategies and Emerging Solutions from Nature

Integrated approaches for plastic waste management

Revitalizing plastic wastes employing bio-circular-green economy principles for carbon neutrality

Critical Review on the Progress of Plastic Bioupcycling Technology as a Potential Solution for Sustainable Plastic Waste Management

Exploring biodegradable alternatives: microorganism-mediated plastic degradation and environmental policies for sustainable plastic management

Synthesis and commercialization of bioplastics: Organic waste as a sustainable feedstock

Operative therapy of gallbladder disease in patients with cystic fibrosis.

Waste to energy: Trending key challenges and current technologies in waste plastic management

Modeling of a low-loss spot-size converter for hollow waveguides with sub-wavelength air core

Biodegradable plastics – Where to throw? A life cycle assessment of waste collection and management pathways in Austria

Practical ways to recycle plastic: current status and future aspects

Plastic Waste Management in India: Challenges, Opportunities, and Roadmap for Circular Economy

Current advances, challenges and strategies for enhancing the biodegradation of plastic waste

Environmental degradation of ordinary plastic wastes: a review on present awareness and disposal prospects

Plastic waste as a significant threat to environment – a systematic literature review

Bioplastic production in terms of life cycle assessment: A state-of-the-art review

Biobased, biodegradable and compostable plastics: chemical nature, biodegradation pathways and environmental strategy

Emission analysis of Sm(3+) and Dy(3+):MgLaLiSi(2)O(7) powder phosphors.