Abstract:Vascularization is essential for the regeneration of three-dimensional (3D) bioprinting organs. As a general method to produce microfluidic channels in 3D printing constructs, coaxial extrusion has attracted great attention. However, the biocompatible bioinks are very limited for coaxial extrusion to fabricate microchannels with regular structure and enough mechanical properties. Herein, a hybrid bioink composed of alginate (Alg) and silk fibroin (SF) was proposed for 3D bioprinting of microchannel networks based on coaxial extrusion. The rheological properties of the bioink demonstrated that the hybrid Alg/SF bioink exhibited improved viscosity and shear thinning behavior compared with either pure Alg or SF bioink and had similar storage and loss modulus in a wide range of shear frequency, indicating a sound printability. Using a coaxial extrusion system with calcium ions and Pluronic F127 flowing through the core nozzle as cross-linkers, the Alg/SF bioink could be extruded and deposited to form a 3D scaffold with interconnected microchannels. The regular structure and smooth pore wall of microchannels inside the scaffold were demonstrated by optical coherence tomography. Micropores left by the rinse of F127 were observed by scanning electron microscope, constituting a hierarchical structure together with the microchannels and printed macropores. Fourier transform infrared spectroscopy analysis proved the complete rinse of F127 and the formation of beta-sheet SF structure. Thus, Alg/SF could form a double cross-linked network, which was much stronger than the pure Alg network. Moreover, cells in the Alg/SF scaffold showed higher viability and proliferation rate than in the Alg scaffold. Therefore, Alg/SF is a promising bioink for coaxial extrusion-based 3D bioprinting, with the printed microchannel network beneficial for complex tissue and organ regeneration.

Optimization of mechanical properties of small diameter artificial blood vessels based on alginate/chitosan/gelatin

3D-Bioprinted Vascular Scaffold with Tunable Mechanical Properties for Simulating and Promoting Neo-Vascularization

Engineering gelatin-based alginate/carbon nanotubes blend bioink for direct 3D printing of vessel constructs

3D Printing of Artificial Blood Vessel: Study on Multi-Parameter Optimization Design for Vascular Molding Effect in Alginate and Gelatin

In Vitro and in Vivo Evaluation of 3D Bioprinted Small-Diameter Vasculature with Smooth Muscle and Endothelium.

Freeform laser and inkjet printing of biological constructs

Thermo-sensitive Sacrificial Microsphere-based Bioink for Centimeter-scale Tissue with Angiogenesis

3D Bioprinting of Reinforced Vessels by Dual-Cross-linked Biocompatible Hydrogels.

Slide-Ring Structure-Based Double-Network Hydrogel with Enhanced Stretchability and Toughness for 3D-Bio-printing and Its Potential Application As Artificial Small-Diameter Blood Vessels.

Complexation‐Induced Resolution Enhancement Pleiotropic Small Diameter Vascular Constructs with Superior Antibacterial and Angiogenesis Properties

Formation of Stable Vascular Networks by 3D Coaxial Printing and Schiff-Based Reaction

3D Bioprinting of Vessel-like Structures with Multilevel Fluidic Channels

Engineering alginate as bioink for bioprinting

Preparation, Mechanical and Biological Properties of Inkjet Printed Alginate/Gelatin Hydrogel

Freestanding vascular scaffolds engineered by direct 3D printing with Gt-Alg-MMT bioinks

Microfluidic Printing of Tunable Hollow Microfibers for Vascular Tissue Engineering.

Three-Dimensional Bioprinting Of Perfusable Hierarchical Microchannels With Alginate And Silk Fibroin Double Cross-Linked Network

Three-dimensional bioprinting of artificial blood vessel: Process, bioinks, and challenges

Microfiber-Templated Porogel Bioinks Enable Tubular Interfaces and Microvascularization Down to the Building Blocks for 3D Bioprinting

A 3D Printing Mold Method for Rapid Fabrication of Artificial Blood Vessels

An approach for mechanical property optimization of cell-laden alginate-gelatin composite bioink with bioactive glass nanoparticles