Mechanical Properties of Femoral Diaphysis and Femoral Neck of Female Rats Chronically Exposed to Various Levels of Cadmium

M. Brzóska,Katarzyna Majewska,Janina Moniuszko-Jakoniuk

DOI: https://doi.org/10.1007/s00223-004-0089-x

2005-03-08

Calcified Tissue International

Abstract:

What problem does this paper attempt to address?

Electrical and Structural Engineering of Cobalt Selenide Nanosheets by Mn Modulation for Efficient Oxygen Evolution

Xu Zhao,Xingqi Li,Yu Yan,Yulin Xing,Sicheng Lu,Liangyong Zhao,Shiming Zhou,Zhenmeng Peng,Jie Zeng

DOI: https://doi.org/10.1016/j.apcatb.2018.05.054

2018-01-01

Abstract:The efficiency of oxygen evolution reaction (OER) depends critically on the steric and electronic structures of electrocatalysts. Moreover, a high conductivity of electrocatalysts ensures a fast electron transfer and thus plays a significant role in OER. Therefore, the development of efficient electrocatalysts with synergistically engineered structure and conductivity is urgently needed. Here, we present an ingenious design of manganese-modulated cobalt selenide nanosheets with systematically engineered structure and conductivity for efficient OER. Tailored atomic disorder, tuned electronic structure, and optimized electrical conductivity could be simultaneously realized by Mn modulation, leading to effective generation of active sites and promoted OER rate. The resultant (CoMn)Se-2 catalysts exhibited remarkable electrocatalytic OER performance with a 5.8-fold and 10.8-fold higher activity relative to CoSe2 and state-of-the-art IrO2. This work provides a comprehensive understanding on origin of high activity of transition metal non-oxide electrocatalysts and enables the rational design of highly efficient electrocatalysts with precisely engineered structural and electrical properties.
Electrochemical Oxygen Evolution Catalyzed by Zn 0.76 Co 0.24 S-Enriched ZnCo 2 S 4 /ZnCr 2 O 4 Nanostructures

Shreelekha Barik,Rathindranath Biswas,Imtiaz Ahmed,Ayan Roy,Krishna Kanta Haldar

DOI: https://doi.org/10.1021/acsanm.3c05739

IF: 6.14

2024-01-10

ACS Applied Nano Materials

Abstract:Finding a suitable replacement for expensive and scarce precious metal electrocatalysts for the oxygen evolution reaction (OER) remains a challenging task. There is a need to research highly efficient and long-lasting catalysts based on transition metals that are readily available on Earth for electrochemical oxygen evolution. In this study, zinc cobalt sulfide (ZnCo2S4) was derived by hydrothermal treatment of metal salt precursors and thioacetamide, followed by calcination at 700 °C for ZnCr2O4 to create a ZnCo2S4/ZnCr2O4 composite nanostructure enriched with Zn0.76Co0.24S. The electrochemical performance of the composition-dependent ZnCo2S4/ZnCr2O4 nanostructure enriched with Zn0.76Co0.24S was then tested along with its constituents, and it was found that the OER activity is not linearly proportional to the composition. We also evaluated the OER activity at pH 7.0 in a neutral medium and the OER electrochemical performance in an alkaline medium. Zn–Co–S is preferable to Zn- and Cr-based thio-spinel as it increases electronic conductivity and decreases charge transfer resistance. Both of these properties are necessary for generating the high oxidative valency of Co species during the OER process. The material’s unique composition and remarkable stability make it highly desirable for future research in this field.

materials science, multidisciplinary,nanoscience & nanotechnology
Zeolitic-imidazolate frameworks-derived Co3S4/NiS@Ni foam heterostructure as highly efficient electrocatalyst for oxygen evolution reaction

Muhammad Rauf,Liulian Pi,Jingwen Wang,Hongwei Mi,Qianling Zhang,Peixin Zhang,Xiangzhong Ren,Yongliang Li

DOI: https://doi.org/10.1016/j.ijhydene.2022.02.103

IF: 7.2

2022-04-01

International Journal of Hydrogen Energy

Abstract:Transition metals sulfide-based nanomaterials have recently received significant attention as a promising cathode electrode for the oxygen evolution reaction (OER) due to their easily tunable electronic, chemical, and physical properties. However, the poor electrical conductivity of metal-sulfide materials impedes their practical application in energy devices. Herein, firstly nano-sized crystals of cobalt-based zeolitic-imidazolate framework (Co-ZIF) arrays were fabricated on nickel-form (NF) as the sacrificial template by a facile solution method to enhance the electrical conductivity of the electrocatalyst. Then, the Co3S4/ heterostructured arrays were synthesized by a simple hydrothermal route. The Co-ZIFs derived Co3S4 nanosheets are grown successfully on NiS nanorods during the hydrothermal sulfurization process. The bimetallic sulfide-based Co3S4/ electrocatalyst demonstrated a very low overpotential of 119 mV at 10 mA cm−2 for OER, which is much lower than that of mono-metal sulfide (201 mV) and ruthenium-oxide (RuO2) on NF (440 mV) electrocatalysts. Furthermore, the Co3S4/ electrocatalyst showed high stability during cyclic voltammetry and chronoamperometry measurements. This research work offers an effective strategy for fabricating high-performance non-precious OER electrocatalysts.

energy & fuels,electrochemistry,chemistry, physical
A Novel Metal–Organic Framework Intermediated Synthesis of Heterogeneous CoS 2 /CoS Porous Nanosheets for Enhanced Oxygen Evolution Reaction

Xiaoyue Hu,Pengfei Tan,Rui Dong,Min Jiang,Lili Lu,Yuan Wang,Hongqin Liu,Yong Liu,Jianping Xie,Jun Pan

DOI: https://doi.org/10.1002/ente.202000961

IF: 4.149

2021-01-14

Energy Technology

Abstract:<section class="article-section__content">Designing and constructing transition metal sulfides (TMSs) as oxygen evolution reaction (OER) electrocatalysts has been attracting increasing attention. Interface engineering can effectively modify the active sites and promote electron transfer, resulting in improvement of electrocatalytic performance. Here, freestanding heterogeneous CoS2/CoS nanosheets are prepared via a simple one‐step sintering process from a kind of novel hierarchical tremella‐like metal–organic framework (MOF). The formation mechanism of the unique MOF and the heterojunctions between CoS2 and CoS is analyzed. Consequently, the prepared cost‐effective OER electrocatalyst achieves satisfying electrocatalytic efficiencies with a diminutive overpotential of 269 mV at 10 mA cm−2 current density, a small Tafel slope of 52 mV dec−1, and good stability in alkaline solution comparable to RuO2 counterparts. This work opens up a new method for constructing 2D electrocatalysts containing catalytic interfaces with boosted OER performance. </section>

energy & fuels
ZIF-67-derived Mn doped Co9S8 supported on N-Enriched porous carbon polyhedron as an efficient electrocatalyst for oxygen evolution reaction

Xiongwei Chen,Weixin Li,Cheng Gong,Xuan He,Hui Chen,Xing Du,Wei Fang,Ling Yang,Lei Zhao

DOI: https://doi.org/10.1016/j.ijhydene.2021.09.123

IF: 7.2

2021-11-01

International Journal of Hydrogen Energy

Abstract:Rational design of efficient oxygen evolution reaction (OER) electrocatalysts plays a significant role in various applications like water splitting and metal-air batteries. Simultaneous modulation of geometric and electronic structure is a promising strategy for boosting the electrocatalytic active of OER catalysts. Herein, a novel type of Mn doped Co9S8 supported on N-enriched porous carbon polyhedron composite material (Mn–Co9S8/NC) is constructed via absorption-pyrolysis-sulfurization treatment of Zeolitic-imidazolate frameworks (ZIF-67). ZIF-67 derived N-enriched porous carbon polyhedron serves as the porous skeleton for anchoring numerous Co9S8 nanoparticles. The results confirm that the incorporation of Mn in Co9S8/NC can improve the degree of graphitization compared with Co9S8/NC, implying the enhancement of the conductivity. Meanwhile, the incorporation of Mn can lead to electronic modulation of Co species to bump up the intrinsic activity of active site in Mn–Co9S8/NC. Due to the synergistic effect of Mn, Co9S8 and porous carbon structure, the specific surface area and electronic structure are optimized, endowing the maximum utilization of active sites. The Mn–Co9S8/NC electrocatalyst exhibits superior OER activity with the overpotential of 286 mV at current density of 10 mA cm−2 in 1.0 M KOH electrolyte. This work provides prospective insights into the synergistic coupling of geometric and electronic structure of Metal-Organic Frameworks (MOFs) material for efficient electrocatalysts.

energy & fuels,electrochemistry,chemistry, physical
Structure optimization and electronic modulation of sulfur-incorporated cobalt nanocages for enhanced oxygen evolution

Ruo-Yao Fan,Jing-Yi Xie,Yu Ma,Jia-Yu Fu,Hai-Jun Liu,Meng-Xuan Li,Wen-Li Yu,Da-Peng Liu,Yong-Ming Chai,Bin Dong

DOI: https://doi.org/10.1016/j.ijhydene.2021.06.080

IF: 7.2

2021-08-01

International Journal of Hydrogen Energy

Abstract:Cobalt-based oxides and hydroxides have always been one of the optimal catalysts for Oxygen Evolution Reaction (OER) in alkaline environment in recent years. However, it remains a challenge for simple cobalt oxides such as CoO, Co3O4 and CoOOH to provide high catalytic activity both with ideal conductivity and stability. Herein, we prepared a new type of sulfur-incorporated cobalt oxide nanocages as high efficiency OER catalyst using Co-MOF as precursor. With the help of sodium sulfide, one step water-warm immersion-alcohol refluxing method can achieve the cavitation of precursors and uniform incorporation of sulfur atoms meanwhile. The hollow cubic structure constructed by fluffy nanosheets is beneficial to the exposure of active sites, the regulation of electronic structure and improve the electron transfer speed. After electrochemical testing, the prepared showed outstanding OER activity compared with other cobalt-based catalysts. More importantly, this material has also withstood the electrochemical test of long range due to the stable structural foundation provided by Co-MOF. This work comes up with a new idea for OER activity promotion of hollow doped cobalt-based catalysts through morphology control and electronic structure optimization.

energy & fuels,electrochemistry,chemistry, physical
In situ formation of robust nanostructured Cobalt oxyhydroxide / Cobalt oxide oxygen evolution reaction electrocatalysts

Yupeng Zhao,Dandan Gao,Johannes Biskupek,Ute Kaiser,Rongji Liu,Carsten Streb

DOI: https://doi.org/10.26434/chemrxiv-2024-j9ml0

2024-03-01

Abstract:The design of efficient and stable oxygen evolution reaction (OER) catalysts-based earth-abundant metal precursors is crucial for large-scale energy conversion and storage. To-date, many catalyst materials are limited by poor stability in harsh oxidative conditions. Thus, much research is targeted at developing materials that can operate under demanding OER conditions. One promising approach is the in-situ formation of catalysts which are inherently stable under the oxidizing, alkaline conditions often used in OER studies. Here, we report how mixed metal sulfide precursors (i.e. CoMo2S4 and FeS2) which give the low overpotentials (307 mV at j = 10 mA·cm-2) at the beginning of catalysis, are converted in-situ to give a highly stable composite OER catalyst under alkaline OER conditions (1 M aqueous KOH solution, pH = 13.8). Mechanistic studies reveal that under operation, the precursor materials are converted to γ-CoOOH nanofibers and Co2O3 nanoparticles, both well-known prototype OER catalysts. The report demonstrates that the presence of crystalline mix metal sulfide precursors is critical for the simultaneous in-situ formation of the active catalysts, highlighting that use of these earth-abundant minerals might offer an economically and chemically viable route for scalable catalyst development.

Chemistry
Preparation of S-doped CuCoO2 nanosheets with more oxygen defects for efficient oxygen evolution reaction

chao jiang,Jilin Bai,Qingyang Shen,xin Ku,Wei Liao,Dehua Xiong

DOI: https://doi.org/10.1039/d4nj03425b

IF: 3.3

2024-09-03

New Journal of Chemistry

Abstract:Noble metal catalysts are excellent oxygen evolution reaction (OER) catalysts, but the expensive price and scarce reserves constrain the development of water splitting. CuCoO2 is known as a promising catalytic material due to its abundant raw materials and unique structure. However, its OER performance requires further enhancement. In this research, S-doped CuCoO2 nanocrystals were synthesized through a one-step solvothermal method. The electrochemical test results revealed that 0.33 mmol S doped CuCoO2 (CCOS-3) exhibits superior catalytic activity (η10 = 375.5 mV, Tafel slope = 83.4 mV dec-1) in 1.0 M KOH electrolyte. Furthermore, after an 18-hour OER stability test, the CCOS-3 exhibited a minimal overpotential degradation of 27 mV. Brunauer-Emmett-Teller (BET) tests showed that surface area of CCOS-3 is 12.51 m2 g−1. X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible-near infrared (UV-Vis-NIR) absorption spectra results revealed that S doping boosts the quantity of oxygen defect sites and narrows the band gap of CuCoO2. Therefore, the charge transfer within the material is accelerated and the catalytic activity is optimized. This work may offer a novel insight into enhancing OER performance of CuCoO2 catalysts through nonmetallic doping.

chemistry, multidisciplinary
Superlattice-Like Co-Doped Mn Oxide and NiFe Hydroxide Nanosheets toward an Energetic Oxygen Evolution Reaction

Ying Zhang,Xia Long,Xiaohe Liu,Gen Chen,Ning Zhang,Mimi Li,Renzhi Ma,Hao Wan

DOI: https://doi.org/10.1021/acssuschemeng.2c00773

2022-04-17

Abstract:Designing efficient electrocatalysts without noble metals is an imperative challenge for the oxygen evolution reaction (OER) application used in the water-splitting field. However, the low catalytic stability and conductivity impede the industrial application. Herein, the cobalt-substituted manganese oxide (MnCo-O) monolayer nanosheet was exfoliated via intercalation, and the nickel iron double hydroxide (NiFe-OH) nanosheet served as a highly active composition. The oppositely charged MnCo-O and NiFe-OH nanosheet would stack into the superlattice (MnCo/NiFe) with alternating layers of ∼1 nm. Using potassium hydroxide (KOH) solution as the electrolyte, the MnCo/NiFe composite material delivered superior OER performances, which showed a small overpotential (233 mV) at current density of 10 mA cm−2 and low Tafel slope (46 mV dec–1). Such a catalyst could further present long-term catalytic durability of more than 50 h with almost no attenuation. This study develops a scalable strategy to simultaneously achieve a distinctive structure at a low cost for a high-performance noble-metal-free electrocatalyst.

chemistry, multidisciplinary,engineering, chemical,green & sustainable science & technology
[Histological changes after chemotherapy of soft tissue sarcomas in the adult].

J. Coindre,B. Nguyen,J. Goussot,I. de Mascarel,D. Maree,A. de Mascarel,M. Trojani

IF: 0.411

Annales de Pathologie

Abstract:The variations of histologic patterns inside the primary tumor have been studied in 15 patients with locally advanced soft tissue sarcomas who were given induction (neo adjuvant) chemotherapy. Increase of tumor necrosis and decrease of tumor cellularity were the predominant aspects identified. The mitosis count tend to be lower, while the nuclear atypies and the number of giant malignant cells tend to increase. In 2 cases, a better tumor differentiation, attributable to the induction chemotherapy was noted. In 10/15 cases, it was concluded to a tumoricidal effect of the chemotherapy. According to tumor grade, 6 among 10 patients with grade III tumor presented a histological response (greater than 50 p. cent of tumor destruction) while none among 5 lesions of grade I or II exhibited a response of such a level. So, the histological study allows an evaluation of the response to chemotherapy which usefully completes the clinical appreciation, and that may be useful for the selection of postoperative adjuvant treatment, as it is in osteosarcomas.
Co–Mn Bimetallic Metal–Organic Frameworks Nanosheets for Efficient Oxygen Evolution Electrocatalysis

Yongchao Hao,Ling Wang,Shuling Cheng,Huiya Cheng,Qianyun He,Lizhi Yi

DOI: https://doi.org/10.1002/ente.202401049

IF: 4.149

2024-08-30

Energy Technology

Abstract:A two‐dimensional cobalt‐based metal–organic framework with Mn doped has been prepared as efficient oxygen evolution electrocatalyst. The obtained Co3Mn1 BDC exhibits excellent activity and supervisor durability with a low overpotential and favorable kinetics. Developing an efficient oxygen evolution reaction (OER) catalyst is the footstone of many electrochemical energy conversion devices. Herein, a cobalt–manganese bimetallic metal–organic framework (MOF) is developed as an efficient OER catalyst (denoted as Co3Mn1 BDC). The Co3Mn1 BDC nanosheets demonstrate advantages in specific surface area, pore size distribution comparing with monometallic Co BDC and Mn BDC. The performance investigations demonstrate that the doping of Mn in Co‐based MOFs facilitates the electrochemical area, charge transfer efficiency, reaction kinetics, and turnover frequency. As a consequence, the Co3Mn1 BDC exhibits a low overpotential of 289 mV at current of 10 mA cm−2 and a favorable Tafel slope of 56.8 mV dec−1 on glassy carbon electrode, which is better than IrO2. When the catalyst is loaded on Ni foam, the overpotential and Tafel slope are further decreased to 231 mV and 50.8 mV dec−1. Moreover, the Raman spectrum confirms that the Co3Mn1 BDC can be transformed into active CoOOH, suggesting the bright prospect in electrocatalysis devices as "precatalyst".

energy & fuels
Synergistically coupling CoS/FeS2 heterojunction nanosheets on a MXene via a dual molten salt etching strategy for efficient oxygen evolution reaction

Zuliang Zhang,Tian Liang,Chulong Jin,Shuyi Zhang,Yuanyuan Cui,Jinxing Chen,Xiaojun Zeng

DOI: https://doi.org/10.1039/d4ta01999g

IF: 11.9

2024-05-24

Journal of Materials Chemistry A

Abstract:Metal sulfides exhibit good catalytic activity for the oxygen evolution reaction (OER) due to their distinctive electronic and structural properties; however, their inadequate electrical conductivity hinders electron transfer, while easy agglomeration obstructs active sites. Herein, a dual molten salt etching strategy and subsequent sulfidation are employed to anchor CoS/FeS 2 heterojunction nanosheets onto an electrically conductive MXene (MXene@CoS/FeS 2 ) for efficient OER. The strong electronic interaction between CoS and FeS 2 , in conjunction with the conductive MXene, facilitates rapid charge transfer, while the heterostructured nanosheets on the MXene substrate expose abundant catalytic active sites. Dut to its delicate nanostructure, the MXene@CoS/FeS 2 composite demonstrates an exceptionally low overpotential (278 mV achieved at 10 mA cm −2 ) and remarkable stability (over 40 h). Density functional theory (DFT) calculations indicate that the electron transfer at the CoS/FeS 2 interface effectively reduces the energy barrier of the rate-determining step (RDS) for MXene@CoS/FeS 2 . Additionally, the simple and straightforward preparation process eliminates the need for HF, enabling efficient and large-scale catalyst production while ensuring safety and environmental friendliness. Overall, the designed MXene@CoS/FeS 2 holds great promise as an OER catalyst.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Co1-xS Embedded in Porous Carbon Derived from Metal Organic Framework As a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

Denghong He,Xiaolin Wu,Wei Liu,Chaojun Lei,Chunlin Yu,Guokui Zheng,Junjie Pan,Lecheng Lei,Xingwang Zhang

DOI: https://doi.org/10.1016/j.cclet.2018.03.020

IF: 9.1

2018-01-01

Chinese Chemical Letters

Abstract:Developing active, robust, and cost-efficient electrocatalysts is critical for oxygen evolution reaction (OER). Here, a novel composite catalyst of Co1-xS embedded in porous dodecahedron carbon hybrid was synthesized by a two-step conversion protocol of a cobalt-based metal-organic framework (ZIF-67). The porous dodecahedron Co1-xS@C composite catalyst was prepared by direct oxidation of ZIF-67 followed by sulfurization reaction. The Co1-xS@C composite exhibit superior OER performance, including a low overpotential of 260 mV for 10 mA/cm(2), a small Tafel slope of similar to 85 mV/dec, outstanding stability over 80 h and almost 100% Faradaic efficiency. The various material characterizations indicate that the excellent activity and strong stability of Co1-xS@C might be attributed to good conductivity of Co1-xS, mesoporous nanostructure, and synergistic effect of Co1-xS encapsulated within porous carbon. This work provides a novel strategy for designing and synthesizing advanced composite electrocatalysts (C) 2018 Chinese Chemical Society and Institute of Materia Medica, Chinese Academy of Medical Sciences. Published by Elsevier B.V. All rights reserved.
A Pacman‐Like Titanium‐Doped Cobalt Sulfide Hollow Superstructure for Electrocatalytic Oxygen Evolution

Tong Bao,Yi Xia,Jingyi Lu,Chaoqi Zhang,Jing Wang,Ling Yuan,Yunxia Zhang,Chao Liu,Chengzhong Yu

DOI: https://doi.org/10.1002/smll.202103106

IF: 13.3

2021-11-10

Small

Abstract:Transition-metal sulfides (TMSs) are attractive oxygen evolution reaction (OER) electrocatalysts. Developing new strategies to improve their electrochemical performance of TMSs is of great significance. Herein, a unique pacman-like titanium-doped cobalt sulfide hollow superstructure (Ti-CoSx HSS) is fabricated as an OER electrocatalyst. Using a prearranged metal-organic framework (MOF)-on-MOF heterostructure as a precursor treated by one-pot sulfidation, a sequential structural conversion process leads to the formation of Ti-CoSx HSS, which is assembled by interconnected Ti-doped CoSx nanocages around a cake-like cavity. Benefiting from the architecture and compositional advantages, Ti-CoSx HSS exhibits excellent OER performance with an overpotential of 249 mV at 10 mA cm-2 and Tafel slope of 45.5 mV dec-1 due to increased active site exposure, enhanced electron and mass transfer. This strategy enabled by MOF-on-MOF paves the way toward innovative MOF derivatives for various applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Interface engineering triggered by carbon nanotube-supported multiple sulfides for boosting oxygen evolution

Ming Chen,Yiping Hu,Kun Liang,Ziming Zhao,Yutong Luo,Sha Luo,Jiantai Ma

DOI: https://doi.org/10.1039/d1nr04540g

IF: 6.7

2021-11-18

Nanoscale

Abstract:Finding an efficient, stable and cheap oxygen evolution reaction (OER) catalyst is very important for renewable energy conversion systems. There are relatively few related research reports due to the thermodynamic instability of transition metal sulfides (TMSs) at the oxidation potential and these are usually focused on single metal sulfides or bimetal sulfides. Metal sulfide mixture systems are rarely studied. The fabrication of a TMS/TMS interface is a feasible method to improve the kinetics of the OER. Here, we constructed TMS hybrid electrocatalysts with multiple phase interfaces for the oxygen evolution reaction, named S-CoFe/CNTs. The results show that the S-CoFe/CNT catalyst exhibits a low overpotential of 258 mV to achieve a current density of 10 mA cm-2, and has high activity in the OER process. Meanwhile, the catalyst also shows a low Tafel slope (69 mV dec-1) and good stability. This can be attributed to the synergistic catalysis of the multiphase interface in the catalyst and the rapid electron transfer pathway brought by CNTs. The new strategy for the synthesis of catalysts containing the TMS/TMS interface provides a new idea and method for the development of efficient and practical water splitting catalysts.
Self‐Supported Gold‐Silk‐Chrysanthemum‐Like Superstructures Arrays Derived from Mn‐doped CoPS Nanowires with Superhydrophilic and Superaerophobic Surface for Enhanced Oxygen Evolution

Jiayao Fan,Mingyu Chen,Bingxue Liu,Dongdong Xu,Yue Lin,Naien Shi,Ying Liu,Zhihui Dai,Jianchun Bao,Min Han,Wei Huang

DOI: https://doi.org/10.1002/admi.202200098

IF: 5.4

2022-05-13

Advanced Materials Interfaces

Abstract:Self‐supported Mn‐doped CoPS nanowires‐based gold‐silk‐chrysanthemum‐like superstructures arrays on carbon cloth (CC) are developed as electrocatalysts for oxygen evolution reaction (OER), showing Mn‐content (x%) dependent electrocatalytic performance. Due to the appropriate Mn‐doping‐content and unique superhydrophilic/superaerophobic surface, the Mn‐CoPS‐5%/CC manifests greatly enhanced OER performance with higher turnover frequency and mass activity, outperforming its counterparts, IrO2/CC, and most of reported OER catalysts. Metal phosphosulfides (layered MPS3 or pyrite‐type MPS) nanostructures have emerged as promising active materials for optoelectronics, magnetism, energy storage, and catalysis. Despite great progress that has been achieved, controllable synthesis of cationic‐doped CoPS nanostructures or related superstructures arrays remains challenging, and their electrocatalytic applications toward oxygen evolution reaction (OER) are not explored. Herein, the self‐supported Mn‐doped CoPS nanowire‐based gold‐silk‐chrysanthemum‐like superstructures arrays on carbon cloth (CC) with variable Mn‐content (Mn‐CoPS‐x%/CC) are fabricated by thermal conversion of MnCo‐layered‐double‐hydroxides‐x%/CC precursors under PxSy vapor/Ar atmosphere. Compared with pure CoPS/CC, all the Mn‐CoPS‐x%/CC show greatly enhanced electrocatalytic OER activity. Due to the suited Mn‐doping content and unique microstructure‐induced superhydrophilic and superaerophobic surface that can optimize electronic structure, offer more available active sites, and foster desorption of O2 product, the Mn‐CoPS‐5%/CC manifests the best OER activity with a low overpotential (270 mV) to reach 20 mA cm−2 current density and high turnover frequency (0.13 s−1), outperforming its counterparts, IrO2/CC and most of recently reported OER catalysts. Moreover, such Mn‐CoPS‐5%/CC exhibits good catalytic stability. This work offers an efficient avenue for optimizing MPS nanostructures toward OER by combining doping and structure engineering strategies, and may promote their applications in water‐splitting or other clean energy options.

materials science, multidisciplinary,chemistry
An efficient and stable MnCo@NiS catalyst for oxygen evolution reaction constructed by a step-by-step electrodeposition way

Xiangxi Wang,Lei Li,Liangge Xu,Zhao Wang,Zhuoyan Wu,Zhiliang Liu,Piaoping Yangs

DOI: https://doi.org/10.1016/j.jpowsour.2021.229525

IF: 9.2

2021-03-01

Journal of Power Sources

Abstract:The oxygen evolution reaction (OER) is vital for water electrolysis which demands low-cost, durable, and efficient electrocatalysts. Recently, 3d transition metal based OER catalysts become very attractive due to their abundant earth reserve and low price. However, these transition metals still suffer from severe dissolution problem and inappropriate adsorption ability to the intermediate species during OER catalysis. Herein, we prepared Mn and Co co-decorated Ni composites nanosheets () via a facile step-by-step electrodeposition way, which showed near-optimal adsorption energy to oxygenated intermediates and much better electrocatalytic OER performance than single metal decorated NiS or non-decorated one, especially requiring a low OER overpotential of only 286 mV at 10 mA cm−2 in an alkaline electrolyte and Tafel slope of 31.5 mV dec−1. The results indicated Mn and Co co-decoration is very efficient way to change the electron distribution and optimize the adsorption energy of NiS, leading to the high OER performance. In particular, the electrode demonstrates a highly impressive stability with not only much less cation dissolution but negligible degradation after 20 h durability test at 50 mA cm−2.

energy & fuels,materials science, multidisciplinary,electrochemistry,chemistry, physical
Metal-organic framework-derived cation regulation of metal sulfides for enhanced oxygen evolution activity

Kai Wan,Jiangshui Luo,Wenbo Liu,Ting Zhang,Jordi Arbiol,Xuan Zhang,Palaniappan Subramanian,Zhiyong Fu,Jan Fransaer

DOI: https://doi.org/10.1016/s1872-2067(23)64533-4

IF: 16.5

2023-11-01

Chinese Journal of Catalysis

Abstract:Heteroatom doping serves as an important strategy to improve the oxygen evolution reaction (OER) activity of transition-metal compounds, while the investigation of intrinsic active sites and mechanisms remains insufficient. In this work, a facile cation regulation strategy is reported to boost the OER activity of metal sulfides via pyrolysis of the Ni-Co bimetallic metal-organic framework. The obtained Ni-substituted CoS nanoparticles on nitrogen-doped mesoporous carbon (Ni-CoS/NC) catalyst achieves a current density of 10 mA cm−2 at a small overpotential of 270 mV with a Tafel slope of 37 mV dec−1 in 1.0 mol L−1 KOH. Through a combination of spectroscopy study and theoretical computations, the activity origin is revealed at the atomic level. The Co x Ni1–x OOH serves as the real active site for the OER generated by the Ni-CoS/NC reconstruction under oxidation potential during OER. The Ni substitution results in a strong electronic interaction between the two metals, thus generating more negatively charged Co atoms and more positively charged Ni atoms in the electrocatalyst. The metal sites with regulated electronic structure exhibit enhanced surface adsorption of OOH* and reduce the OER overpotential. Meanwhile, the conductive porous carbon scaffold facilitates electron transfer, mass diffusion, and the accessibility of active sites. This work not only provides a feasible cation regulation strategy for the design of high-performance electrocatalysts for low-cost energy storage and conversion systems, but also yields fresh insight into the activity enhancement mechanisms and intrinsic active sites.

chemistry, physical,engineering, chemical, applied
Sub-3-nm High-Entropy Metal Sulfide Nanoparticles with Synergistic Effects as Promising Electrocatalysts for Enhanced Oxygen Evolution Reaction

Fengqi Li,Yujie Ma,Hao Wu,Qingxi Zhai,Jingyuan Zhao,Hurong Ji,Shaochun Tang,Xiangkang Meng

DOI: https://doi.org/10.1021/acs.jpcc.2c05666

2022-10-19

The Journal of Physical Chemistry C

Abstract:Both high-entropy materials and metal–organic frameworks (MOFs) can be used as efficient catalysts for oxygen evolution, but it remains a challenge to combine their advantages to further improve the oxygen evolution reaction (OER). Herein, MOFs are served as precursors to prepare the high-entropy metal sulfide (HEMS) (MnFeCoNiCu)S2 nanoparticles based on the maximized configurational entropy theory, exhibiting ultra-efficient OER performance. The strong synergistic effect among Mn, Fe, Co, Ni, and Cu builds a stable electronic structure and provides a favorable local coordination environment, which enhance the catalytic performance greatly. In addition, the appropriate doping of sulfur source contributes to modulate the electronic structure, which promotes the formation of single-phase HEMS nanoparticles with the dimeter of sub-3 nm. The (MnFeCoNiCu)S2 nanoparticles display the best OER performance (a low overpotential of 221 mV at 10 mA cm–2 in 1 M KOH solution) and good stability (remains to be 97.6% after 12 h by chronoamperometry). This work provides a potential application for high-entropy materials based on MOF precursors as OER catalysts.

chemistry, physical,nanoscience & nanotechnology,materials science, multidisciplinary
Boosting Oxygen Evolution Reaction on Metallocene‐based Transition Metal Sulfides Integrated with N‐doped Carbon Nanostructures

Pitchai Thangasamy,Sanghee Nam,Saewoong Oh,Hyacinthe Randriamahazaka,Il‐Kwon Oh

DOI: https://doi.org/10.1002/cssc.202101469

IF: 8.4

2021-10-14

ChemSusChem

Abstract:In this study, utilizing metallocene and organosulfur chelating agent, we report an innovative synthetic route to electrochemically activated transition metal sulfides entrapped in pyridinic nitrogen-incorporated carbon nanostructures for superior oxygen evolution reaction (OER). Most importantly, preferential electrochemical activation process, which consists of both anodic and cathodic pre-treatment steps, strikingly enhance OER and long-lasting cyclic stability. The substantial increase in OER electrocatalytic activity of Ni9S8/Ni3S2-NC and Co9S8-NC during the activation process is mainly attributed to the increase of faradaic active site density on the catalytic layer resulting from the reconstruction of catalytic interfaces. We also found that Fe-based metallocene (ferrocene (Fc))-incorporation in the Co9S8-NC and Ni9S8/Ni3S2-NC nanostructures have significantly boost the OER activity. Thus, the combined effects of Fc-incorporation and the electrochemical activation process reduced the overpotential of about ~115 mV and ~95 mV on the Ni9S8/Ni3S2-NC and Co9S8-NC nanostructures to derive a current density of 10 mA cm-2, respectively. Notably, Fc-Ni9S8/Ni3S2-NC electrocatalysts needing a very small overpotentials of ~222 mV, ~244 mV, and ~280 mV to acquire the current densities of 10, 20, and 50 mA cm-2, respectively. This work opens up a new avenue for superior OER electrocatalysts by the utilization of metallocene and the preferential electrochemical activation process.

chemistry, multidisciplinary,green & sustainable science & technology

Mechanical Properties of Femoral Diaphysis and Femoral Neck of Female Rats Chronically Exposed to Various Levels of Cadmium

Electrical and Structural Engineering of Cobalt Selenide Nanosheets by Mn Modulation for Efficient Oxygen Evolution

Electrochemical Oxygen Evolution Catalyzed by Zn 0.76 Co 0.24 S-Enriched ZnCo 2 S 4 /ZnCr 2 O 4 Nanostructures

Zeolitic-imidazolate frameworks-derived Co3S4/NiS@Ni foam heterostructure as highly efficient electrocatalyst for oxygen evolution reaction

A Novel Metal–Organic Framework Intermediated Synthesis of Heterogeneous CoS 2 /CoS Porous Nanosheets for Enhanced Oxygen Evolution Reaction

ZIF-67-derived Mn doped Co9S8 supported on N-Enriched porous carbon polyhedron as an efficient electrocatalyst for oxygen evolution reaction

Structure optimization and electronic modulation of sulfur-incorporated cobalt nanocages for enhanced oxygen evolution

In situ formation of robust nanostructured Cobalt oxyhydroxide / Cobalt oxide oxygen evolution reaction electrocatalysts

Preparation of S-doped CuCoO2 nanosheets with more oxygen defects for efficient oxygen evolution reaction

Superlattice-Like Co-Doped Mn Oxide and NiFe Hydroxide Nanosheets toward an Energetic Oxygen Evolution Reaction

[Histological changes after chemotherapy of soft tissue sarcomas in the adult].

Co–Mn Bimetallic Metal–Organic Frameworks Nanosheets for Efficient Oxygen Evolution Electrocatalysis

Synergistically coupling CoS/FeS2 heterojunction nanosheets on a MXene via a dual molten salt etching strategy for efficient oxygen evolution reaction

Co1-xS Embedded in Porous Carbon Derived from Metal Organic Framework As a Highly Efficient Electrocatalyst for Oxygen Evolution Reaction

A Pacman‐Like Titanium‐Doped Cobalt Sulfide Hollow Superstructure for Electrocatalytic Oxygen Evolution

Interface engineering triggered by carbon nanotube-supported multiple sulfides for boosting oxygen evolution

Self‐Supported Gold‐Silk‐Chrysanthemum‐Like Superstructures Arrays Derived from Mn‐doped CoPS Nanowires with Superhydrophilic and Superaerophobic Surface for Enhanced Oxygen Evolution

An efficient and stable MnCo@NiS catalyst for oxygen evolution reaction constructed by a step-by-step electrodeposition way

Metal-organic framework-derived cation regulation of metal sulfides for enhanced oxygen evolution activity

Sub-3-nm High-Entropy Metal Sulfide Nanoparticles with Synergistic Effects as Promising Electrocatalysts for Enhanced Oxygen Evolution Reaction

Boosting Oxygen Evolution Reaction on Metallocene‐based Transition Metal Sulfides Integrated with N‐doped Carbon Nanostructures