Monitoring groundwater variation by satellite and implications for in-situ gravity measurements.

Y. Fukuda,Keiko Yamamoto,T. Hasegawa,T. Nakaegawa,J. Nishijima,M. Taniguchi

DOI: https://doi.org/10.1016/j.scitotenv.2008.05.018

2009-04-15

Abstract:

What problem does this paper attempt to address?

Motor Fault Diagnosis Based on Short-time Fourier Transform and Convolutional Neural Network

Li-Hua Wang,Xiao-Ping Zhao,Jia-Xin Wu,Yang-Yang Xie,Yong-Hong Zhang

DOI: https://doi.org/10.1007/s10033-017-0190-5

IF: 2.964

2017-11-01

Chinese Journal of Mechanical Engineering

Abstract:With the rapid development of mechanical equipment, the mechanical health monitoring field has entered the era of big data. However, the method of manual feature extraction has the disadvantages of low efficiency and poor accuracy, when handling big data. In this study, the research object was the asynchronous motor in the drivetrain diagnostics simulator system. The vibration signals of different fault motors were collected. The raw signal was pretreated using short time Fourier transform (STFT) to obtain the corresponding time-frequency map. Then, the feature of the time-frequency map was adaptively extracted by using a convolutional neural network (CNN). The effects of the pretreatment method, and the hyper parameters of network diagnostic accuracy, were investigated experimentally. The experimental results showed that the influence of the preprocessing method is small, and that the batch-size is the main factor affecting accuracy and training efficiency. By investigating feature visualization, it was shown that, in the case of big data, the extracted CNN features can represent complex mapping relationships between signal and health status, and can also overcome the prior knowledge and engineering experience requirement for feature extraction, which is used by traditional diagnosis methods. This paper proposes a new method, based on STFT and CNN, which can complete motor fault diagnosis tasks more intelligently and accurately.

engineering, mechanical
Motor Fault Diagnosis Method Based on Deep Learning

Y. Hu,Dong Yu,Zhen Xu

DOI: https://doi.org/10.1109/ICTech55460.2022.00054

2022-02-01

Abstract:Motors occupies an important position in the manufacturing industry.Aiming at the problem of low accuracy of motor fault recognition,the temporal convolutional neural network(TCN) and attention mechanism are introduced. The fault diagnosis method based on TCN, by adding the SE-block module, improves the performance of the model at the cost of minimal complexity.Comparative experiments show that compared with the GRU model, LSTM model and the original TCN model,this method can better extract fault features in motor fault diagnosis, with higher accuracy and better generalization ability.

Engineering,Computer Science
A deep learning method for motor fault diagnosis based on a capsule network with gate-structure dilated convolutions

Yu Liang,Binbin Li,Bin Jiao

DOI: https://doi.org/10.1007/s00521-020-04999-0

2020-05-23

Neural Computing and Applications

Abstract:Motor fault diagnosis is critical to predictive maintenance of electrical motor condition monitoring, whereas the conventional motor fault diagnosis method cannot effectively diagnose conditions caused by motors' complex structure, non-stationary signals and mechanical big data. To solve the mentioned problems and enhance the fault diagnostic accuracy and generalization performance under different actual motor conditions, this study proposes an efficient, noise-resistant, end-to-end deep learning algorithm based on a novel capsule network with gate-structure dilated convolutions (GDCCN) for motor fault diagnosis; such algorithm is subtly incorporated with the input gate structure of long short-term memory network (LSTM), the dilated convolutions, as well as the capsule network. In the GDCCN model, the raw vibration signals are directly fed into the input gate structure of LSTM, which are employed to effectively remove noise and harvest more valuable information from the input sample. The dilated convolution is exploited in the output denoising feature maps to exponentially expand the receptive field of convolution kernel, so more redundant information can be acquired to reduce the effect of randomness. The capsule network is introduced to generate a set of vector neurons to represent an entity existing in the feature maps; as a result, more specific feature representations can be extracted, and the feature can be comprehended, thereby enhancing the diagnostic accuracy. As revealed from the experimental results, the GDCCN-based intelligent motor fault diagnosis method outperforms the other classical DL algorithms in diagnosis accuracy, noise resistance, generalization and transfer-learning performance of different workloads.

computer science, artificial intelligence
Motor Fault Diagnosis Algorithm Based on Wavelet and Attention Mechanism

Yong Yan,Qiang Liu,Xiao qin Gao

DOI: https://doi.org/10.1155/2021/3782446

IF: 2.336

2021-07-08

Journal of Sensors

Abstract:In order to improve the maintenance efficiency of the motor and realize the real-time fault diagnosis function of the motor, a motor fault diagnosis algorithm based on wavelet and attention mechanism is proposed. Firstly, the motor vibration signal is decomposed by wavelet transform, and the high-frequency signal is denoised to improve the signal-to-noise ratio. Secondly, the frequency band and time dimension after wavelet decomposition are taken as input data, the convolution neural network is used to fuse the frequency band features of data, and the bidirectional gated loop unit is used to fuse the time series features. Then, the attention mechanism is used to adaptively integrate the features of different time points. Finally, motor fault diagnosis and prediction are realized by classifier recognition. Experimental results show that, compared with the existing deep learning fault diagnosis model, this method has higher diagnosis accuracy and can accurately diagnose the running state of the motor.

engineering, electrical & electronic,instruments & instrumentation
Sound Visualization and Convolutional Neural Network in Fault Diagnosis of Electric Motorbike

Jian-Da Wu,Che-Yuan Hsieh,Wen-Jun Luo

DOI: https://doi.org/10.18280/ts.380626

IF: 2.299

2021-12-31

Traitement du signal

Abstract:This study proposed convolutional neural network (CNN) training for different figure recognition to diagnose electric motorbike faults. Traditional motorbike maintenance is usually carried out by technicians to find the problem step by step. Many resources are wasted and time consumed in diagnosing maintenance problems. Due to rising environmental protection awareness, motorbike power systems gradually transformed from combustion engines into the electric motor. The sound amplitude generated by the combustion engine is great and may cover other faulty sounds. The electric power system sound amplitude is greatly decreased, permitting various fault diagnosis to be performed by extracting the electric motor sound. With the development of computers and image processing, deep learning neural network for picture recognition technology becomes more feasible. This study presents the motor system sound visualization for fault diagnosis. First obtain the sound signals of the motor in the five different states of the operation in the laboratory and the road test, and draw the time domain graph, frequency domain graph and spectrogram graph to be used as the test database. The results graphs of various states were trained through a CNN. The signal states were then classified to achieve fault diagnosis. Experiments and identification results show that the spectrogram and CNN method can identify motorbike faults most effectively compared to the time domain graph and the frequency domain graph.

computer science, artificial intelligence,engineering, electrical & electronic
IInception-CBAM-IBiGRU based fault diagnosis method for asynchronous motors

Zhengting Li,Peiliang Wang,Zeyu Yang,Xiangyang Li,Ruining Jia

DOI: https://doi.org/10.1038/s41598-024-55367-0

2024-03-02

Abstract:Aiming at the problems of insufficient extraction of asynchronous motor fault features by traditional deep learning algorithms and poor diagnosis of asynchronous motor faults in robust noise environments, this paper proposes an end-to-end fault diagnosis method for asynchronous motors based on IInception-CBAM-IBiGRU. The method first uses a signal-to-grayscale image conversion method to convert one-dimensional vibration signals into two-dimensional images and initially extracts shallow features through two-dimensional convolution; then the Improved Inception (IInception) module is used as a residual block to learning features at different scales with a residual structure, and extracts its important feature information through the Convolutional Block Attention Module (CBAM) to extract important feature information and adjust the weight parameters; then the feature information is input to the Improved Bi-directional Gate Recurrent Unit (IBiGRU) to extract its timing features further; finally, the fault identification is achieved by the SoftMax function. The primary hyperparameters in the model are optimized by the Weighted Mean Of Vectors Algorithm (INFO). The experimental results show that the method is effective in fault diagnosis of asynchronous motors, with an accuracy rate close to 100%, and can still maintain a high accuracy rate under the condition of low noise ratio, with good robustness and generalization ability.
Effective Fault Diagnosis Based on Wavelet and Convolutional Attention Neural Network for Induction Motors

Minh-Quang Tran,Meng-Kun Liu,Quoc-Viet Tran,Toan-Khoa Nguyen

DOI: https://doi.org/10.1109/tim.2021.3139706

IF: 5.6

2022-01-01

IEEE Transactions on Instrumentation and Measurement

Abstract:Induction motors are important equipment in modern industry. However, the occurrence of fatigue failure following an extended period of operation invariably results in a catastrophic failure. As a result, monitoring and diagnosing induction motors is critical to avoiding unplanned shutdowns caused by premature failures. This article aims to develop an effective method for motor fault detection using time–frequency contents of vibration signals and an attention-based convolutional neural network model. First, the vibration signals are collected and labeled into five different categories: normal condition, outer ring fault, inner ring fault, misalignment condition, and broken rotor bar. Then, using the Morlet function, continuous wavelet transform (CWT) converts the vibratory time-series signals to the scalogram feature images. The time–frequency feature images are created after downsampling and converting the measured vibration signals to the frequency domain. These images are then resized and fed into the proposed convolutional attention neural network (CANN) to identify various induction motor failures. The experimental results demonstrate that the suggested model can provide an excellent diagnosis accuracy of 99.43%, significantly better than the state-of-the-art deep learning approaches for fault diagnosis. Moreover, the developed model’s robustness is validated against adversarial attacks based on the fast gradient sign method (FGSM) by including white Gaussian noise.

engineering, electrical & electronic,instruments & instrumentation
Real-Time Motor Fault Diagnosis Based on TCN and Attention

Hui Zhang,Baojun Ge,Bin Han

DOI: https://doi.org/10.3390/machines10040249

IF: 2.899

2022-03-30

Machines

Abstract:Motor failure can result in damage to resources and property. Real-time motor fault diagnosis technology can detect faults and diagnosis in time to prevent serious consequences caused by the continued operation of the machine. Neural network models can easily and accurately fault diagnose from vibration signals. However, they cannot notice faults in time. In this study, a deep learning model based on a temporal convolutional network (TCN) and attention is proposed for real-time motor fault diagnosis. TCN can extract features from shorter vibration signal sequences to allow the system to detect and diagnose faults faster. In addition, attention allows the model to have higher diagnostic accuracy. The experiments demonstrate that the proposed model is able to detect faults in time when they occur and has an excellent diagnostic accuracy.

engineering, mechanical, electrical & electronic
A deep learning approach for electric motor fault diagnosis based on modified InceptionV3

Lifu Xu,Soo Siang Teoh,Haidi Ibrahim

DOI: https://doi.org/10.1038/s41598-024-63086-9

IF: 4.6

2024-05-30

Scientific Reports

Abstract:Electric motors are essential equipment widely employed in various sectors. However, factors such as prolonged operation, environmental conditions, and inadequate maintenance make electric motors prone to various failures. In this study, we propose a thermography-based motor fault detection method based on InceptionV3 model. To enhance the detection accuracy, we apply Contrast Limited Adaptive Histogram Equalization (CLAHE) to the input images. Furthermore, we improved the performance of the InceptionV3 by integrating a Squeeze-and-Excitation (SE) channel attention mechanism. The proposed model was tested using a dataset containing 369 thermal images of an electric motor with 11 types of faults. Image augmentation was employed to increase the data size and the evaluation was conducted using fivefold cross validation. Experimental results indicate that the proposed model can achieve accuracy, precision, recall, and F1 score of 98.82%, 98.93%, 98.82%, and 98.87%, respectively. Additionally, by freezing the fully connected layers of the InceptionV3 model for feature extraction and training a Support Vector Machines (SVM) to perform classification, it is able to achieve 100% detection rate across all four evaluation metrics. This research contributes to the field of industrial motor fault diagnosis. By incorporating deep learning techniques based on InceptionV3 and SE channel attention mechanism with a traditional classifier, the proposed method can accurately classify different motor faults.

multidisciplinary sciences
A novel deep convolutional neural network and its application to fault diagnosis of the squirrel-cage asynchronous motor under noisy environment

Lerui Chen,Yidan Ma,Haiquan Wang,Shengjun Wen,Lifen Guo

DOI: https://doi.org/10.1088/1361-6501/acea9b

IF: 2.398

2023-08-04

Measurement Science and Technology

Abstract:The intelligent classification achieved through the utilization of deep learning networks, which possess the capability to automatically extract essential features from data, has garnered significant attention within the domain of fault diagnosis research. Nevertheless, within the industrial production process, the data collected inevitably suffers from noise contamination, thereby adversely affecting the network's diagnostic results. To enhance the denoising prowess and mitigate the risks associated with overfitting in deep learning networks, this paper introduces the input gate structure of long short-term memory and an attention module into the convolutional neural network to propose a novel architecture known as the gate convolutional attention neural network (gate-CANN), which subsequently finds application in the domain of squirrel-cage asynchronous motor fault diagnosis. Firstly, the sensor-acquired time domain vibration undergo conversion into two-dimensional time–frequency images through the employment of continuous wavelet transform (CWT). Subsequently, the CWT images in two directions are put into gate-CANN for feature extraction, respectively. Finally, feature fusion and fault diagnosis are achieved in the end of network. To validate the effectiveness of the proposed method, it undergoes verification using the fault diagnosis testbed specific to squirrel cage asynchronous motors. The obtained results demonstrate that, in comparison to alternative diagnostic methods, the proposed approach exhibits superior capabilities in terms of noise resistance and generalization.

engineering, multidisciplinary,instruments & instrumentation
A Residual Multihead Self-Attention Network Using Multimodal Shallow Feature Fusion for Motor Fault Diagnosis

Xiaoliang Feng,Jinya Su,Juan Feng

DOI: https://doi.org/10.1109/JSEN.2023.3322151

IF: 4.3

2023-12-01

IEEE Sensors Journal

Abstract:Fault diagnosis (FD) is a crucial task in motor-based industrial systems, but traditional signal analysis-based methods face various challenges that make it difficult to achieve high-level performance. This article proposes a novel approach called residual multihead self-attention network using multimodal shallow feature fusion (ResMHA-MMSFF) for motor FD. The method first applies an improved feature fusion technique based on a gating mechanism (GM) to combine the datasets provided by both vibration and current signals. The fused features are then introduced into the residual multihead self-attention network to obtain more detailed information. Finally, a SoftMax function is adopted to classify faults and diagnose motor system faults. Comparative experiments under different loads and speed conditions are conducted to demonstrate the effectiveness of the proposed method, which outperforms existing single-signal or other deep learning-based methods.

Engineering,Computer Science
A Multi-Input Convolutional Neural Network Model for Electric Motor Mechanical Fault Classification Using Multiple Image Transformation and Merging Methods

Insu Bae,Suan Lee

DOI: https://doi.org/10.3390/machines12020105

IF: 2.899

2024-02-03

Machines

Abstract:This paper addresses the critical issue of fault detection and prediction in electric motor machinery, a prevalent challenge in industrial applications. Faults in these machines, stemming from mechanical or electrical issues, often lead to performance degradation or malfunctions, manifesting as abnormal signals in vibrations or currents. Our research focuses on enhancing the accuracy of fault classification in electric motor facilities, employing innovative image transformation methods—recurrence plots (RPs), the Gramian angular summation field (GASF), and the Gramian angular difference field (GADF)—in conjunction with a multi-input convolutional neural network (CNN) model. We conducted comprehensive experiments using datasets encompassing four types of machinery components: bearings, belts, shafts, and rotors. The results reveal that our multi-input CNN model exhibits exceptional performance in fault classification across all machinery types, significantly outperforming traditional single-input models. This study not only demonstrates the efficacy of advanced image transformation techniques in fault detection but also underscores the potential of multi-input CNN models in industrial fault diagnosis, paving the way for more reliable and efficient monitoring of electric motor machinery.

engineering, mechanical, electrical & electronic
Fault Detection and Diagnosis in Electric Motors Using Convolution Neural Network and Short-Time Fourier Transform

Ronny Francis Ribeiro Junior,Isac Antônio dos Santos Areias,Mateus Mendes Campos,Carlos Eduardo Teixeira,Luiz Eduardo Borges da Silva,Guilherme Ferreira Gomes

DOI: https://doi.org/10.1007/s42417-022-00501-3

2022-04-22

Abstract:PurposeFault diagnosis is vital to any maintenance sector since early fault detection can avoid catastrophic failures and also a waste of both time and money. Common defect diagnostic methods take just a few features from the vibration signal, which can lead to a wrong analysis. Deep Learning (DL) is well-known for its ability to extract features from a signal, and a Convolutional Neural Network (CNN) is one of the most successful deep learning approaches.MethodsThis paper uses a CNN with Short-time Fourier Transform (STFT), a time-frequency feature map, to extract as much information as possible from vibration signals. To validate the method, an experimental bench was used where it was possible to simulate up to six different faults. A vibration signal in the time domain was recorded to obtain the STFT response. Then, a CNN is trained to diagnose and predict the faults, considering the STFT as the only input.ResultsThe findings suggest that the proposed method can properly identify the various faults.ConclusionSince the approach is based on frequency domain analysis, it can be easily replicated for different motors.

engineering, mechanical,mechanics
Optimizing and Analyzing Performance of Motor Fault Diagnosis Algorithms for Autonomous Vehicles via Cross-Domain Data Fusion

Fengyun Xie,Gang Li,Qiuyang Fan,Qian Xiao,Shengtong Zhou

DOI: https://doi.org/10.3390/pr11102862

IF: 3.5

2023-09-29

Processes

Abstract:Electric motors play a pivotal role in the functioning of autonomous vehicles, necessitating accurate fault diagnosis to ensure vehicle safety and reliability. In this paper, a novel motor fault diagnosis approach grounded in vibration signals to enhance fault detection performance is presented. The method involves capturing vibration signals from the motor across various operational states and frequencies using vibration sensors. Subsequently, the signals undergo transformation into frequency domain representations through fast Fourier transform. This includes normalizing and concatenating the amplitude frequency and phase frequency signals into comprehensive frequency domain information. Leveraging Gramian image-encoding attributes, cross-domain fusion of time-domain and frequency-domain data is achieved. Finally, the fused Gram angle field map is fed into the ConvMixer deep learning model, augmented by the ECA mechanism to facilitate precise motor fault identification. Experimental outcomes underscore the efficacy of cross-domain data fusion, showcasing improved pattern recognition and recognition rates for the models compared to traditional time-domain methods. Additionally, a comparative analysis of various deep learning models highlights the superior performance of the ECA-ConvMixer model. This study makes significant contributions by introducing a cross-domain data fusion method, merging time-domain and frequency-domain information to enhance motor vibration signal analysis. Additionally, the incorporation of the ECA-ConvMixer deep learning model, equipped with attention mechanisms, effectively captures critical features, thus serving as a robust tool for motor fault diagnosis. These innovations not only enhance diagnostic accuracy but also have broad applications in areas like autonomous vehicles and industry, leading to reduced maintenance expenses and enhanced equipment reliability.

engineering, chemical
CNN-Based Feature Fusion Motor Fault Diagnosis

Long Qian,Binbin Li,Lijuan Chen

DOI: https://doi.org/10.3390/electronics11172746

IF: 2.9

2022-09-01

Electronics

Abstract:Artificial intelligence fields have been using deep learning in recent years. Due to its powerful data mining capabilities, deep learning has a wide-ranging impact on the diagnosis of motor faults. A method for diagnosing motor faults based on the multi-feature fusion of convolutional neural network (CNN) is presented in this paper. As far as the method is concerned, CNN is used as the basic framework, and the CNN model has been improved. First, the collected vibration and current signals are preprocessed. Second, segmented multi-time window synchronous input is performed on the processed data. In addition, a multi-scale feature extraction process and time series fusion of vibration and current signals subject to synchronous input in the same time window can be performed, which ultimately enables the identification of motor faults with a high degree of accuracy. In order to verify the validity of the proposed fault diagnosis model, an experimental platform for fault simulation was built for the motor, and vibration and current signals of different motor states were collected and verified by experimentation. According to the results of the experiment, the method can effectively combine motor vibration and current signal fault features, and thus motor fault diagnosis can be improved. In comparison with a single signal input, a multi-signal input provides greater accuracy and stability. As compared to other multi-signal feature fusion methods, such a deep learning model is able to extract fault features in a more comprehensive manner, which helps to improve the accuracy of motor fault diagnosis.

engineering, electrical & electronic,computer science, information systems,physics, applied
In Situ Motor Fault Diagnosis Using Enhanced Convolutional Neural Network in an Embedded System

Siliang Lu,Gang Qian,Qingbo He,Fang Liu,Yongbin Liu,Qunjing Wang

DOI: https://doi.org/10.1109/jsen.2019.2911299

IF: 4.3

2020-08-01

IEEE Sensors Journal

Abstract:Convolutional neural networks (CNNs) are one of the most efficient deep learning techniques and have been widely used in motor fault diagnosis. However, most of them are implemented in desktop computers to process off-line signals. In this paper, an in situ motor fault diagnosis method is proposed by implementing an enhanced CNN model into a designed embedded system consisting of a Raspberry Pi and a signal acquisition and processing circuit. To the best of our knowledge, this topic has not been investigated yet in the literature. First, the hardware, algorithms, and heterogeneous computing framework are introduced in detail. Then, the method effectiveness and efficiency are validated on a motor test rig. In particular, as the resources in an embedded system are limited, the algorithm accuracy and execution time are investigated. The robustness of the designed system is further validated by analyzing the motor signals with different signal-to-noise ratios. The contributions of this paper include the following: 1) a heterogeneous computing framework is proposed and an integrated embedded system is designed; 2) the performance of the enhanced CNN in embedded system is validated; and 3) the proposed method provides a solution to realize in situ motor fault diagnosis on a small-size, flexible, and convenient handheld device by exploiting the artificial intelligence technique.

engineering, electrical & electronic,instruments & instrumentation,physics, applied
Application of Convolutional Neural Network in Motor Bearing Fault Diagnosis

Shuiqin Zhou,Lepeng Lin,Chu Chen,Wenbin Pan,Xiaochun Lou

DOI: https://doi.org/10.1155/2022/9231305

IF: 3.12

2022-08-30

Computational Intelligence and Neuroscience

Abstract:In the field of mechanical and electrical equipment, the motor rolling bearing is a workpiece that is extremely prone to damage and failure. However, the traditional fault diagnosis methods cannot keep up with the development pace of the times because they need complex manual pretreatment or the support of specific expert experience and knowledge. As a rising star, the data-driven fault diagnosis methods are increasingly favored by scholars and experts at home and abroad. The convolutional neural network has been widely used because of its powerful feature extraction ability for all kinds of complex information and its outstanding research results in image processing, target tracking, target diagnosis, time-frequency analysis, and other scenes. Therefore, this paper introduces a convolutional neural network and applies it to motor-bearing fault diagnosis. Aiming at the shortcomings of fault signal and convolutional neural network, a large-scale maximum pooling strategy is proposed and optimized by wavelet transform to improve the fault diagnosis efficiency of motor bearing under high-voltage operation. Compared with other machine learning algorithms, the convolution neural network fault diagnosis model constructed in this paper not only has high accuracy (up to 0.9871) and low error (only 0.032) but also is simple to use. It provides a new way for motor bearing fault diagnosis and has very important economic and social value.

mathematical & computational biology,neurosciences
Global contextual residual convolutional neural networks for motor fault diagnosis under variable-speed conditions

Yadong Xu,Xiaoan Yan,Beibei Sun,Zheng Liu,Yadong Xu,Xiaoan Yan,Beibei Sun,Zheng Liu

DOI: https://doi.org/10.1016/j.ress.2022.108618

2022-09-01

Abstract:Convolutional neural networks, with a powerful ability for feature representation, have made vast inroads into motor fault diagnosis. However, most of the existing CNN models cannot favorably handle the data generated in variable-speed scenarios. First, the continuous irregular fluctuation of the motor makes the time domain interval between two adjacent fault pulses change continuously. Secondly, due to the complex transmission path of the signal under unstable conditions, the noise distribution is complex. To address this problem, a global contextual residual convolutional neural network is proposed. The major novelties fall into three aspects. First, to make full use of the features from all intermediate layers and explore multiscale information, a new hierarchical structure is adopted in the CNN model. Second, since different features are of different importance for fault detection tasks, the global context module is explored to guide the model to pay more attention to global discriminant features. Third, the features learned by the network can either promote each other or contradict each other, so a multi-feature fusion layer is introduced to integrate these features adaptively. Case studies using the benchmark motor dataset and the industrial motor bearing dataset are performed to validate the superiority of the GC-ResCNN.

engineering, industrial,operations research & management science
Enhancing Rolling Bearing Fault Diagnosis in Motors Using the OCSSA-VMD-CNN-BiLSTM Model: A Novel Approach for Fast and Accurate Identification

Yong Chang,Guangqing Bao

DOI: https://doi.org/10.1109/access.2024.3408628

IF: 3.9

2024-06-08

IEEE Access

Abstract:This study addresses the challenges posed by the strong noise and nonstationary characteristics of vibration signals to enhance the efficiency and accuracy of rolling-bearing fault diagnosis in electric motors. A fault diagnosis model is proposed based on improved variational mode decomposition (VMD) and a convolutional neural network bidirectional long short-term memory (CNN-BiLSTM). In the feature extraction stage, the Osprey-Cauchy-Sparrow search algorithm (OCSSA) optimizes the modal number K and penalty coefficient of the VMD, facilitating the decomposition and reconstruction of the original vibration signals to extract fault features based on the minimum envelope entropy criterion. In the fault diagnosis stage, the mean, variance, peak value, kurtosis, RMS value, peak-to-average ratio (PAR), impulse factors, form factor, and clearance factor were computed from the reconstructed signals. These indicators were used to construct a feature vector for each sample, serving as the input for the OCSSA-VMD-CNN-BiLSTM fault diagnosis model, which quickly and accurately identifies the fault types. Experimental verification confirms that this method enhances the speed and accuracy of rolling-bearing fault identification compared to traditional approaches.

computer science, information systems,telecommunications,engineering, electrical & electronic
A motor bearing fault diagnosis method based on multi-source data and one-dimensional lightweight convolution neural network

Yifan Dong,Chuanbo Wen,Zheng Wang

DOI: https://doi.org/10.1177/09596518221124785

2022-10-08

Abstract:Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering, Ahead of Print. Deep learning is widely adopted in the field of fault diagnosis because of its powerful feature representation capabilities. The existing diagnosis methods are always proposed based on the data only from a single source and are susceptible to interference. Due to the need to convertthe data into two dimensions, data preprocessing also requires a lot of time. To address these problems, a new fault diagnosis algorithm based on multi-source data and one-dimensional lightweight convolutional neural network is presented. In particular, original data can be exploited directly without conversion to two dimensions. To enhance data fusion, attention module and channel shuffle module are added. Besides, to improve the utilization of data, a modified [math] criterion is proposed to remove outliers in multi-source data. The performance of the proposed method in multi-source data fusion is verified in bearing failure experiments. Compared with the existing diagnosis methods (one-dimensional convolutional neural network, ResNet, ShuffleNet, MobileNet, EfficientNet and the two recurrence methods), multi-source data and one-dimensional lightweight convolutional neural network does a better job of balancing the efficiency and robustness.

Monitoring groundwater variation by satellite and implications for in-situ gravity measurements.

Motor Fault Diagnosis Based on Short-time Fourier Transform and Convolutional Neural Network

Motor Fault Diagnosis Method Based on Deep Learning

A deep learning method for motor fault diagnosis based on a capsule network with gate-structure dilated convolutions

Motor Fault Diagnosis Algorithm Based on Wavelet and Attention Mechanism

Sound Visualization and Convolutional Neural Network in Fault Diagnosis of Electric Motorbike

IInception-CBAM-IBiGRU based fault diagnosis method for asynchronous motors

Effective Fault Diagnosis Based on Wavelet and Convolutional Attention Neural Network for Induction Motors

Real-Time Motor Fault Diagnosis Based on TCN and Attention

A deep learning approach for electric motor fault diagnosis based on modified InceptionV3

A novel deep convolutional neural network and its application to fault diagnosis of the squirrel-cage asynchronous motor under noisy environment

A Residual Multihead Self-Attention Network Using Multimodal Shallow Feature Fusion for Motor Fault Diagnosis

A Multi-Input Convolutional Neural Network Model for Electric Motor Mechanical Fault Classification Using Multiple Image Transformation and Merging Methods

Fault Detection and Diagnosis in Electric Motors Using Convolution Neural Network and Short-Time Fourier Transform

Optimizing and Analyzing Performance of Motor Fault Diagnosis Algorithms for Autonomous Vehicles via Cross-Domain Data Fusion

CNN-Based Feature Fusion Motor Fault Diagnosis

In Situ Motor Fault Diagnosis Using Enhanced Convolutional Neural Network in an Embedded System

Application of Convolutional Neural Network in Motor Bearing Fault Diagnosis

Global contextual residual convolutional neural networks for motor fault diagnosis under variable-speed conditions

Enhancing Rolling Bearing Fault Diagnosis in Motors Using the OCSSA-VMD-CNN-BiLSTM Model: A Novel Approach for Fast and Accurate Identification

A motor bearing fault diagnosis method based on multi-source data and one-dimensional lightweight convolution neural network