Transgenic expression of an expanded (GCG)13 repeat PABPN1 leads to weakness and coordination defects in mice

P. Dion,Vijayalakshmi Shanmugam,C. Gaspar,C. Messaed,I. Meijer,A. Toulouse,Janet L Laganière,J. Roussel,D. Rochefort,Simon E. Laganiere,C. Allen,G. Karpati,J. Bouchard,B. Brais,G. Rouleau

DOI: https://doi.org/10.1016/j.nbd.2004.09.021

IF: 7.046

2005-04-01

Neurobiology of Disease

Abstract:

What problem does this paper attempt to address?

Progress of orthopaedic research in China over the last decade

Jun Lin,Lin Chen,Dou Dou

DOI: https://doi.org/10.1016/j.jot.2020.04.010

IF: 6.6

2020-09-01

Journal of Orthopaedic Translation

Abstract:<p>Musculoskeletal injury and disease is one of the major diseases that threaten the human health worldwide. To address these clinical challenges, basic research in the pathogenesis, diagnosis, treatment, and prevention of these diseases and injuries must be strengthened. Over the last decade, National Natural Science Foundation of China (NSFC) has initiated various research programs with a total funding of over 1149 million RMB to support orthopaedic exploration. Under the potent support of NSFC, great progress has been made in basic research, talent training, platform construction and the clinical translation in the field of orthopaedics in China. In this article, we will analyze the data from NSFC, summarize the representative scientific achievements in the past decade, and discuss the future challenges and directions for orthopaedic research in China.</p>

orthopedics
The application of Micro-CT in the microstructure of vertebrae

Li Shengyun,Fan Shunwu,Zhao Fengdong

DOI: https://doi.org/10.3760/cma.j.issn.0253-2352.2016.04.008

2016-01-01

Abstract:With the aging of population, the incidence of osteoporosis and intervertebral disc degeneration increased remarkably.As a consisting part of spine, vertebrae play important roles in spinal diseases.The microstructure of vertebrae is closely associated with not only its biomechanical properties, but also its adjacent intervertebral discs.A detailed understanding of vertebrae's microstructure can help us understand the initial mechanism, progression and prognosis of vertebrae and its adjacent discs' diseases.On the other hand, traditional examinations are less effective in detecting vertebrae's microstructure.Being a noninvasive, high-resolution and bony-sensitive neo-technology, Micro-CT has obvious advantages in detecting vertebrae's microstructure.Many researches have reported the usage of Micro-CT in reveling microstructures while they also raised problems.Thus, herein we searched the related information of vertebrae's microstructure scanning with Micro-CT, explained its basic mechanism, reviewed its progress in technology and arithmetic, and concluded the latest developments.Depending on the microstructure revealed by Micro-CT, achievements in biomechanical properties of vertebrae and intervertebral disc degeneration have been made,and related problems have been summarized.Also, new applications of Micro-CT in spinal diseases are discussed for acquiring reasonable clinical data in the future.
Engineering multi-tissue units for regenerative Medicine: Bone-tendon-muscle units of the rotator cuff

Dan Wang,Xu Zhang,Shuting Huang,Yang Liu,Bruma Sai-Chuen Fu,Kingston King-Lun Mak,Anna Maria Blocki,Patrick Shu-Hang Yung,Rocky S Tuan,Dai Fei Elmer Ker,Bruma Sai-chuen Fu,Kingston King-lun Mak,Patrick Shu-hang Yung,Rocky S. Tuan

DOI: https://doi.org/10.1016/j.biomaterials.2021.120789

IF: 14

2021-05-01

Biomaterials

Abstract:<p>Our body systems are comprised of numerous multi-tissue units. For the musculoskeletal system, one of the predominant functional units is comprised of bone, tendon/ligament, and muscle tissues working in tandem to facilitate locomotion. To successfully treat musculoskeletal injuries and diseases, critical consideration and thoughtful integration of clinical, biological, and engineering aspects are necessary to achieve translational bench-to-bedside research. In particular, identifying ideal biomaterial design specifications, understanding prior and recent tissue engineering advances, and judicious application of biomaterial and fabrication technologies will be crucial for addressing current clinical challenges in engineering multi-tissue units. Using rotator cuff tears as an example, insights relevant for engineering a bone-tendon-muscle multi-tissue unit are presented. This review highlights the tissue engineering strategies for musculoskeletal repair and regeneration with implications for other bone-tendon-muscle units, their derivatives, and analogous non-musculoskeletal tissue structures.</p>

engineering, biomedical,materials science, biomaterials
Application and Development of Modern 3D Printing Technology in the Field of Orthopedics

Binglong Li,Meng Zhang,Qunshan Lu,Baoqing Zhang,Zhuang Miao,Lei Li,Tong Zheng,Peilai Liu

DOI: https://doi.org/10.1155/2022/8759060

2022-02-15

BioMed Research International

Abstract:3D printing, also known as additive manufacturing, is a technology that uses a variety of adhesive materials such as powdered metal or plastic to construct objects based on digital models. Recently, 3D printing technology has been combined with digital medicine, materials science, cytology, and other multidisciplinary fields, especially in the field of orthopedic built-in objects. The development of advanced 3D printing materials continues to meet the needs of clinical precision medicine and customize the most suitable prosthesis for everyone to improve service life and satisfaction. This article introduces the development of 3D printing technology and different types of materials. We also discuss the shortcomings of 3D printing technology and the current challenges, including the poor bionics of 3D printing products, lack of ideal bioinks, product safety, and lack of market supervision. We also prospect the future development trends of 3D printing.

biotechnology & applied microbiology,medicine, research & experimental
Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

Alice Cheng,Zvi Schwartz,Adrian Kahn,Xiyu Li,Zhenxing Shao,Muyang Sun,Yingfang Ao,Barbara D. Boyan,Haifeng Chen

DOI: https://doi.org/10.1089/ten.teb.2018.0119

2019-02-01

Abstract:IMPACT STATEMENT: Challenges in musculoskeletal tissue regeneration affect millions of patients globally. Scaffolds for tissue engineering bone and cartilage provide promising solutions that increase healing and decrease need for complicated surgical procedures. Porous scaffolds have emerged as an attractive alternative to traditional scaffolds. However, the success of advanced materials, use of biological factors, and manufacturing techniques can vary depending on use case. This review provides perspective on porous scaffold manufacturing, characterization and application, and can be used to inform future scaffold design.
Current advancements in therapeutic approaches in orthopedic surgery: a review of recent trends

Wenqing Liang,Chao Zhou,Juqin Bai,Hongwei Zhang,Bo Jiang,Jiangwei Wang,Lifeng Fu,Hengguo Long,Xiaogang Huang,Jiayi Zhao,Haibing Zhu

DOI: https://doi.org/10.3389/fbioe.2024.1328997

IF: 5.7

2024-02-10

Frontiers in Bioengineering and Biotechnology

Abstract:Recent advancements in orthopedic surgery have greatly improved the management of musculoskeletal disorders and injuries. This review discusses the latest therapeutic approaches that have emerged in orthopedics. We examine the use of regenerative medicine, including stem cell therapy and platelet-rich plasma (PRP) injections, to accelerate healing and promote tissue regeneration. Additionally, we explore the application of robotic-assisted surgery, which provides greater precision and accuracy during surgical procedures. We also delve into the emergence of personalized medicine, which tailors treatments to individual patients based on their unique genetic and environmental factors. Furthermore, we discuss telemedicine and remote patient monitoring as methods for improving patient outcomes and reducing healthcare costs. Finally, we examine the growing interest in using artificial intelligence and machine learning in orthopedics, particularly in diagnosis and treatment planning. Overall, these advancements in therapeutic approaches have significantly improved patient outcomes, reduced recovery times, and enhanced the overall quality of care in orthopedic surgery.

multidisciplinary sciences
Orthopedical Nanotechnology

Peng Wang,Qing Jiang

DOI: https://doi.org/10.1007/978-981-16-8984-0_15

2023-01-01

Abstract:Nanotechnology is considered to be a very promising platform for biomedical applications. Most recently, this modern technology has brought innovation in the field of nanomedicine, particularly within orthopedics. Various kinds of nanotechnology-based biomaterials with novel physical, chemical, and biological properties have been applied in orthopedics to improve the way of diagnosis and treatment. In this chapter, nanotechnology-based biomaterials that used within the field of orthopedics, including metallic nanomaterials, nonmetallic nanomaterials, are briefly introduced. We further summaries the biomedical applications of nanotechnology-based biomaterials in terms of bone/cartilage tissue engineering for scaffolds preparation, surface modifications for implantable materials with enhanced osteointegration properties, diagnosis and therapeutics for oncology and musculoskeletal infections, and nanotechnology-based drug delivery systems in orthopedics. Although nanotechnology has revolutionized the diagnosis of and treatment for orthopedics, there are still some future obstacles that have been discussed that extensive clinical safety investigations should be further performed to verify their long-term effects on human health.
Advanced therapies in orthopaedics

Tobias Winkler,Sven Geissler,Tazio Maleitzke,Carsten Perka,Georg N Duda,Alexander Hildebrandt

DOI: https://doi.org/10.1530/EOR-24-0084

2024-09-02

Abstract:Advanced therapies are expected to play a crucial role in supporting repair after injury, halting the degeneration of musculoskeletal tissue to enable and promote physical activity. Despite advancements, the progress in developing advanced therapies in orthopaedics lags behind specialties like oncology, since innovative regenerative treatment strategies fall short of their expectations in musculoskeletal clinical trials. Researchers should focus on understanding the mechanism of action behind the investigated target before conducting clinical trials. Strategic research networks are needed that not only enhance scientific exchange among like-minded researchers but need to include early on commercial views, companies and venture perspectives, regulatory insights and reimbursement perspectives. Only in such collaborations essential roadblocks towards clinical trials and go-to-patients be overcome.
Advances in Regenerative Sports Medicine Research

Liren Wang,Jia Jiang,Hai Lin,Tonghe Zhu,Jiangyu Cai,Wei Su,Jiebo Chen,Junjie Xu,Yamin Li,Jing Wang,Kai Zhang,Jinzhong Zhao

DOI: https://doi.org/10.3389/fbioe.2022.908751

IF: 5.7

2022-05-14

Frontiers in Bioengineering and Biotechnology

Abstract:Regenerative sports medicine aims to address sports and aging-related conditions in the locomotor system using techniques that induce tissue regeneration. It also involves the treatment of meniscus and ligament injuries in the knee, Achilles' tendon ruptures, rotator cuff tears, and cartilage and bone defects in various joints, as well as the regeneration of tendon–bone and cartilage–bone interfaces. There has been considerable progress in this field in recent years, resulting in promising steps toward the development of improved treatments as well as the identification of conundrums that require further targeted research. In this review the regeneration techniques currently considered optimal for each area of regenerative sports medicine have been reviewed and the time required for feasible clinical translation has been assessed. This review also provides insights into the direction of future efforts to minimize the gap between basic research and clinical applications.

multidisciplinary sciences
Is there a color line in death? An examination of end-of-life care in the African American community.

R. Hazin,Cheryl A. Giles

IF: 2.739

Journal of the National Medical Association

Abstract:Although the goals of end-of-life care and hospice are to mitigate suffering and improve quality of life for patients with terminal illnesses, they remain underutilized by a significant number of African Americans. While sociocultural issues play a role in the underutilization of these resources among African Americans, other confounding factors affect the ability of African Americans to adequately access quality care at the end of life. Here, the authors examine the various barriers preventing increased use of hospice care and palliative therapy among African Americans. A particular focus of this examination will revolve around suggestions for increasing the use of end-of-life care among African Americans in the future.
Linguistic Analysis Identifies Emergent Biomaterial Fabrication Trends for Orthopaedic Applications

Ryan C Locke,Hannah M Zlotnick,Brendan D Stoeckl,George W Fryhofer,Jonathan H Galarraga,Abhishek P Dhand,Miltiadis H Zgonis,James L Carey,Jason A Burdick,Robert L Mauck

DOI: https://doi.org/10.1002/adhm.202202591

Abstract:The expanse of publications in tissue engineering (TE) and orthopedic TE (OTE) over the past 20 years presents an opportunity to probe emergent trends in the field to better guide future technologies that can make an impact on musculoskeletal therapies. Leveraging this trove of knowledge, a hierarchical systematic search method and trend analysis using connected network mapping of key terms is developed. Within discrete time intervals, an accelerated publication rate for anatomic orthopedic tissue engineering (AOTE) of osteochondral defects, tendons, menisci, and entheses is identified. Within these growing fields, the top-listed key terms are extracted and stratified into evident categories, such as biomaterials, delivery method, or 3D printing and biofabrication. It is then identified which categories decreased, remained constant, increased, or emerged over time, identifying the specific emergent categories currently driving innovation in orthopedic repair technologies. Together, these data demonstrate a significant convergence of material types and descriptors used across tissue types. From this convergence, design criteria to support future research of anatomic constructs that mimic both the form and function of native tissues are formulated. In summary, this review identifies large-scale trends and predicts new directions in orthopedics that will define future materials and technologies.
BIOMECHANICS OF THE BONE AND THE KNEE JOINT

Zhixiu Hao,Huijie Leng,Chuanyong Qu,Chao Wan

DOI: https://doi.org/10.19636/j.cnki.cjsm42-1250/o3.2010.06.004

2010-01-01

Abstract:Osteoarthritis caused by knee sports injuries and cumulative fatigue damage is very common.The research result of biomechanical behavior of the human knee is not only important to know the etiology and pathogenesis,improve the treatment of joint diseases,but also helpful to design the knee rehabilitation and orthopedic brace.The experimental method and simulation method are mainly used in the biomechanical research of the knee joints.The finite element simulation method has been widely used in recent years,and its further development has to depend on the knowledge of macroscopic mechanical properties and microscopic structure of joint bone and tissue.
3D Printing Technology Applied in Orthopaedics

He Chao,Wang Lei,Li Guoyuan,Jiang Wenbo,Hao Yongqiang

DOI: https://doi.org/10.3760/cma.j.issn.0253-2352.2017.19.008

2017-01-01

Abstract:3D printing is an important technology occurs in 1980s,which has been about more than 30 years since the first 3D printing machine was developed.Currently,it develops rapidly and its application scope has been greatly expanded.Its most prominent features are the "personalized" printing and the diversification of "printing ink".The "personalized" printing can make it possible to tailor the biological materials for each patient,and the diversity of "printing ink" can make the technology meeting different clinical needs.3D printing can be divided into four aspects:l) the collection and formation of inage of printing object;2) the treatment and the transformation of the image information;3) printing based on the data formatted;4) the post-treatment and pedormance evaluating of the printing object.At present,the common methods related to orthopaedics include:1) stereolithography appearance;2) selective laser sintering;3) fused deposition modeling;4) laminated object manufacturing;5) the direct metal melting technology (selective laser melting or electron beam melting);6) the ink jet printing technology.A variety of materials have been used in 3D printers,including the natural medical materials like collagen and chitosan,the synthetic polymers like polylactic acid,polyglycolic acid and peek,the bioactive ceramic materials like hydroxyapatite,the medical metal materials like titanium.The 3D printed material are mainly used in the following seven aspects in orthopaedics:1) the preoperative planning,such as the printing of the lesion and resection model;2) operation navigation make the surgery procedure more accurate;3) making the customized prosthesis and implant;4) implanting the external fixation;5) the development of new surgical instruments meets the special needs of patients;6) making the personalized tissue engineering scaffold used in regenerative medicine;7) the development of drug and its release study.
From Materials to Clinical: Advances in 3D-Printed Scaffolds for Cartilage Tissue Engineering

hewen Zhang,Meng Wang,Rui Wu,Jianjun Guo,Aihua Sun,Zhixiang Li,Ruqing Ye,Gaojie Xu,Yuchuan Cheng

DOI: https://doi.org/10.1039/d3cp00921a

IF: 3.3

2023-08-26

Physical Chemistry Chemical Physics

Abstract:Osteoarthritis caused by articular cartilage defects is a particularly common orthopedic disease that can involve the entire joint, causing pain and even amputation. A global patient population of approximately 250 million people has an increasing demand for new therapies with excellent results, tissue engineering scaffolds have been proposed as a potential strategy for the repair and reconstruction of cartilage defects. The precise control and high flexibility of 3D printing provide a platform for subversive innovation. In this review, cartilage tissue engineering (CTE) scaffolds manufactured by different biomaterials were summarized from the perspective of 3D printing strategies, the bionic structure strategies and special functional designs were classified and discussed, and the advantages and limitations of the above CTE scaffold preparation elements were analyzed in detail. Finally, the application prospect and challenges of 3D printing CTE scaffold are discussed, which can provide enlightening insights for the current research on it.

chemistry, physical,physics, atomic, molecular & chemical
Engineering Musculoskeletal Grafts for Multi-Tissue Unit Repair: Lessons From Developmental Biology and Wound Healing

Xu Zhang,Dan Wang,King-Lun Kingston Mak,Rocky S. Tuan,Dai Fei Elmer Ker

DOI: https://doi.org/10.3389/fphys.2021.691954

IF: 4

2021-08-24

Frontiers in Physiology

Abstract:In the musculoskeletal system, bone, tendon, and skeletal muscle integrate and act coordinately as a single multi-tissue unit to facilitate body movement. The development, integration, and maturation of these essential components and their response to injury are vital for conferring efficient locomotion. The highly integrated nature of these components is evident under disease conditions, where rotator cuff tears at the bone-tendon interface have been reported to be associated with distal pathological alterations such as skeletal muscle degeneration and bone loss. To successfully treat musculoskeletal injuries and diseases, it is important to gain deep understanding of the development, integration and maturation of these musculoskeletal tissues along with their interfaces as well as the impact of inflammation on musculoskeletal healing and graft integration. This review highlights the current knowledge of developmental biology and wound healing in the bone-tendon-muscle multi-tissue unit and perspectives of what can be learnt from these biological and pathological processes within the context of musculoskeletal tissue engineering and regenerative medicine. Integrating these knowledge and perspectives can serve as guiding principles to inform the development and engineering of musculoskeletal grafts and other tissue engineering strategies to address challenging musculoskeletal injuries and diseases.

physiology
Computer-Aided Tissue Engineering in Whole Bone Replacement Treatment

m wettergreen,b s bucklen,wei sun,michael a k liebschner

DOI: https://doi.org/10.1115/imece2005-82000

2005-01-01

Abstract:Tissue engineering is developing into a less speculative field involving the careful interplay of numerous design parameters and multi-disciplinary professionals. Problem solving abilities and state of the art research tools are required to develop solutions for a wide variety of clinical issues. One area of particular interest is orthopaedic biomechanics, a field that is responsible for the treatment of over 700,000 vertebral fractures in the U.S alone last year. Engineers are currently lacking the technology and knowledge required to govern the subsistence of cells in vivo, let alone the knowledge to create a functional tissue replacement for a whole organ. Despite this, advances in Computer Aided Tissue Engineering (CATE) are continually growing. Using a combinatory approach to scaffold design, patient-specific implants may be constructed. Computer aided design (CAD), optimization of geometry using voxel finite element models or other optimization routines, creation of a library of architectures with specific material properties, rapid prototyping, and determination of a defect site using imaging modalities highlight the current availability of design resources. Our study represents a patient specific approach for constructing a complete vertebral body via building blocks. Though some of the methods described cannot be realized with current technology, namely complete construction of the vertebral body via FDM, the necessary advances are not far off. Computing power and CAD programs need to improve slightly to allow the rapid generation of complex models that would ease the fabrication of an appropriate number of building blocks. The main bottleneck of the process described in this study is the general lack of knowledge of human mechanobiology and the role of cellular interactions on artificial substrates including immune responses, and foreign body reactions. Assuming these biological parameters can be identified, a scaffold may be designed-with a proper pore size and interconnectivity, microstructure, degradation rate, and surface chemistry. The advantage of the outlined process lies in adjustment of the vertebral compliance first, to ensure adequate load transfer, an important property for vertebral replacement. Subsequently, net biological properties can be fine tuned by simply scaling the final construct. Mixing and matching of geometries may be utilized to design asymmetric scaffolds, or scaffolds that exhibit a discontinuous microstructural stiffness with the goal of accentuating fluid flow. Finally, while these techniques lend themselves to the formulation of bone constructs, they can be used for other parts of the body as well that do not require load-bearing support.
Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics

Chaohua Gao,Chenyu Wang,Hui Jin,Zhonghan Wang,Zuhao Li,Chenyu Shi,Yi Leng,Fan Yang,He Liu,Jincheng Wang

DOI: https://doi.org/10.1039/c8ra04815k

IF: 4.036

2018-01-01

RSC Advances

Abstract:The bone defects can be investigated according to 3D data from computed tomography and magnetic resonance imaging, and then treated by CAD software for model and topology optimization to fabricate the customized implants.

chemistry, multidisciplinary
Healthcare and Scientific Treatment of Knee Osteoarthritis

Huan Wang,Baoan Ma

DOI: https://doi.org/10.1155/2022/5919686

2022-01-28

Journal of Healthcare Engineering

Abstract:Knee osteoarthritis is a chronic degenerative disease companied with chronic knee pain and dysfunction. However, the etiology and pathogenesis of knee osteoarthritis were unclear. Currently, age, diet, trauma, obesity, and inheritance are the main risk factors. The major pathological hallmarks of knee osteoarthritis included subchondral bone sclerosis, articular cartilage degeneration, arthrosynovitis, and osteophyte. With the acceleration of the aging process in China, the treatment of knee arthritis and the methods to improve the quality of life have become the focus of medical staff. Currently, therapies in clinical practice include surgery and nonoperative treatment; however, the clinical effects of different individuals at different stages will still be very different. This article reviews the recent advances in the treatment of knee osteoarthritis from three aspects: nonsurgical treatment, surgical treatment, and modern new medical means.

health care sciences & services
3D bioprinting in orthopedics translational research

XuanQi Zheng,JinFeng Huang,JiaLiang Lin,DeJun Yang,TianZhen Xu,Dong Chen,Xingjie Zan,AiMin Wu

DOI: https://doi.org/10.1080/09205063.2019.1623989

2019-06-13

Abstract:The repair of critical-size bone defect remains a challenge for orthopedic surgeons. With the advent of an aging society and their accompanying chronic diseases, it is becoming more difficult to treat bone defects, especially large segmental bone defects that are caused by trauma, tumors, infections, and congenital malformations. New materials and technologies need to be developed to address these conditions. 3D bioprinting is a novel technology that bridges the biomaterial and living cells and is an important method in tissue engineering projects. 3D bioprinting has the advantages of replacing or repairing damaged tissue and organs. The progress in material science and 3D printing devices make 3D bioprinting a technology which can be used to create various scaffolds with a large range of advanced material and cell types. However, in regard to the widespread use of bioprinting, biosafety, immunogenicity and rising costs are rising to be concerned. This article reviews the developments and applications of 3D bioprinting and highlights newly applied techniques and materials and the recent achievements in the orthopedic field. This paper also briefly reviews the difference between the methods of 3D bioprinting. The challenges are also elaborated with the aim to research materials, manufacture scaffolds, promote vascularization and maintain cell viability.
Bone Tissue Engineering in the Treatment of Bone Defects

Nannan Xue,Xiaofeng Ding,Rizhong Huang,Ruihan Jiang,Heyan Huang,Xin Pan,Wen Min,Jun Chen,Jin-Ao Duan,Pei Liu,Yiwei Wang

DOI: https://doi.org/10.3390/ph15070879

IF: 4.6

2022-07-18

Pharmaceuticals

Abstract:Bones play an important role in maintaining exercise and protecting organs. Bone defect, as a common orthopedic disease in clinics, can cause tremendous damage with long treatment cycles. Therefore, the treatment of bone defect remains as one of the main challenges in clinical practice. Today, with increased incidence of bone disease in the aging population, demand for bone repair material is high. At present, the method of clinical treatment for bone defects including non-invasive therapy and invasive therapy. Surgical treatment is the most effective way to treat bone defects, such as using bone grafts, Masquelet technique, Ilizarov technique etc. In recent years, the rapid development of tissue engineering technology provides a new treatment strategy for bone repair. This review paper introduces the current situation and challenges of clinical treatment of bone defect repair in detail. The advantages and disadvantages of bone tissue engineering scaffolds are comprehensively discussed from the aspect of material, preparation technology, and function of bone tissue engineering scaffolds. This paper also summarizes the 3D printing technology based on computer technology, aiming at designing personalized artificial scaffolds that can accurately fit bone defects.

pharmacology & pharmacy,chemistry, medicinal

Transgenic expression of an expanded (GCG)13 repeat PABPN1 leads to weakness and coordination defects in mice

Progress of orthopaedic research in China over the last decade

The application of Micro-CT in the microstructure of vertebrae

Engineering multi-tissue units for regenerative Medicine: Bone-tendon-muscle units of the rotator cuff

Application and Development of Modern 3D Printing Technology in the Field of Orthopedics

Advances in Porous Scaffold Design for Bone and Cartilage Tissue Engineering and Regeneration

Current advancements in therapeutic approaches in orthopedic surgery: a review of recent trends

Orthopedical Nanotechnology

Advanced therapies in orthopaedics

Advances in Regenerative Sports Medicine Research

Is there a color line in death? An examination of end-of-life care in the African American community.

Linguistic Analysis Identifies Emergent Biomaterial Fabrication Trends for Orthopaedic Applications

BIOMECHANICS OF THE BONE AND THE KNEE JOINT

3D Printing Technology Applied in Orthopaedics

From Materials to Clinical: Advances in 3D-Printed Scaffolds for Cartilage Tissue Engineering

Engineering Musculoskeletal Grafts for Multi-Tissue Unit Repair: Lessons From Developmental Biology and Wound Healing

Computer-Aided Tissue Engineering in Whole Bone Replacement Treatment

Additive manufacturing technique-designed metallic porous implants for clinical application in orthopedics

Healthcare and Scientific Treatment of Knee Osteoarthritis

3D bioprinting in orthopedics translational research

Bone Tissue Engineering in the Treatment of Bone Defects