Development of New 2 . 4 L Direct-Injection Gasoline Engine

Yasuhiro Motohashi,K. Kubota,N. Akaishi,Kazuya Ishiki,T. Iwamoto,M. Kinoshita
Abstract:A new 2.4 L i-VTEC 4-cylinder direct injection gasoline engine reconciling low CO2 emissions performance with high power has been developed as part of a next-generation Honda engine series. The new engine employs a direct injection system provided with a high-pressure multi-hole injector positioned between the inlet valves. The inlet head port, combustion chamber shape, injector spray, and fuel injection control were optimized in order to realize homogeneous air-fuel mixture formation and enhanced combustion. Together with the reduction of friction through the modification of the engine framework, these innovations made it possible to realize a 4% increase in maximum power, a 12% increase in maximum torque, and a 5% or more increase in unit fuel efficiency. The use of this engine in the 2013 model year Accord, together with the employment of a high-efficiency CVT and modification of the vehicle body, has made it possible to realize an 11% increase in the EPA fuel economy label value and an emissions level corresponding to the LEV II SULEV level in the California Air Resources Board regulations. In addition, the use of a new engine framework that was reduced in weight while realizing stiffness in the areas necessary for noise and vibration performance made it possible to balance weight savings with the realization of an equivalent or higher level of noise and vibration performance than the previous engine. Introduction of new technologies * Automobile R&D Center that seek to balance further contribution to the realization of a low-carbon society with driving pleasure, the following targets were set for the development of the new engine in an attempt to reconcile environmental performance in the form of increased fuel efficiency and reduced emissions with dynamic performance offering driving pleasure: (1) Dynamic lowand mid-speed torque to realize driving pleasure in the standard driving range (2) Top-class fuel economy (3) Emissions level satisfying the LEV II SULEV standard (4) A balance between increased quietness and reduced weight 3. Overview of Engine and Applied Technologies Figure 1 shows an external view of the engine, and Table 1 shows the main specifications of the new engine and a conventional 2.4 L engine. The core engine technology adopted in order to realize the development goals was in-cylinder direct injection, in an attempt to reconcile power performance with environmental performance by increasing charging efficiency and thermal efficiency against conventional port injection.
What problem does this paper attempt to address?