Abstract:Lead-halide perovskite nanocrystals (NCs) present superior photoelectric properties, but the poor stability seriously hinders their practical application. The encapsulation of perovskite NCs inside mesoporous silica (m-SiO2) matrix is considered as one of the most feasible pathways to improve the stability of NCs. However, the challenges of loose encapsulation structure, aggregation of particles, high energy consumption during the preparation of CsPbX3@m-SiO2 composites have not yet been overcome, which throw a shadow over the large-scale commercial applications. Here, we present a dual-shell encapsulation strategy that enables the formation of highly emissive CsPbBr3@m-SiO2@SiO2 composites, achieving an exceptional photoluminescence quantum yield (PLQY) of 97.37%. The reaction parameters for the preparation of composites are meticulous investigated. The CsPbBr3 NCs can be well formed inside the pores of m-SiO2 as the m-SiO2 is introduced into the precursor solution. The secondary SiO2 shells can effectively seal the open pores of m-SiO2. As a result, the as-prepared CsPbBr3@m-SiO2@SiO2 composites present excellent stability, in which the composites can maintain 93.16% of initial intensity after storage for 84 days. Besides, a series of CsPbX3@m-SiO2@SiO2 composites with tunable emission wavelength in the range of 428.6-630.6 nm are prepared through facile designing the halide ratios of precursor solution, which present a wide color gamut (148.48% of the National Television Standards Committee). In addition, a white light-emitting diode (LED) is fabricated by combining CsPbBr3@m-SiO2@SiO2 composites and K2SiF6:Mn4+ phosphors with a 455 nm LED chip, which exhibits good photoelectric performances. This facile low-temperature dual-shell encapsulation strategy reported here provides a new pathway for preparing high-performance perovskite composites, facilitating their practical photoelectric application.

In Situ Fabrication of Highly Efficient and Stable Cs2NaInCl6: Sb3+@PVDF Composite Films for Optoelectronic Devices

In Situ Fabrication of Lead-Free Double Perovskite/Polymer Composite Films for Optoelectronic Devices and Anticounterfeit Printing.

In Situ Preparation of Highly Luminescent Sb3+/Mn2+ Co-Doped Cs2KInCl6 Lead-Free Double Perovskites in a PVDF Matrix and Application to White Light Emitting Diodes and Anti-Counterfeiting

Synergistic Effects of Surface Ligand Engineering and Double Matrices Protecting Enable Ultrastable and Highly Emissive Blue/Cyan Perovskite Nanocrystal Films for Multifunctional Applications

In Situ Fabrication of Superfine Perovskite Composite Nanofibers with Ultrahigh Stability by One-Step Electrospinning Toward White Light-Emitting Diode

Highly Efficient Blue Emission from Self-Trapped Excitons in Stable Sb 3+ -Doped Cs 2 NaInCl 6 Double Perovskites.

High Stability and Strong Luminescence CsPbBr3–Cs4PbBr6 Thin Films for All-Inorganic Perovskite Light-Emitting Diodes

One-Step Polymeric Melt Encapsulation Method To Prepare Cspbbr3 Perovskite Quantum Dots/Polymethyl Methacrylate Composite With High Performance

Dielectric screening enabled ultrastable luminescence in CsPbBr3 perovskite crystal encapsulated by ferroelectric Poly(vinylidene fluoride)

Highly Efficient White‐Light Emission Triggered by Sb3+ Dopant in Indium‐Based Double Perovskites

Surface ligand engineering renders tube-like perovskite nanocrystal composites with outstanding polar organic solvent-tolerance and strong emission

In Situ Fabrication of Lead-Free Cs3Cu2I5 Nanostructures Embedded in Poly(Vinylidene Fluoride) Electrospun Fibers for Polarized Emission

CsPbBr3 Nanoplatelets Via a Room-Temperature Postsynthetic Surface-Mediated Strategy for Blue Light-Emitting Diodes

Improving the Performance and Stability of Perovskite Light-Emitting Diodes by a Polymeric Nanothick Interlayer-Assisted Grain Control Process

In Situ Fabrication of Lead-Free Cs 3 Cu 2 I 5 Nanostructures Embedded in Poly(Vinylidene Fluoride) Electrospun Fibers for Polarized Emission

Dual-Shell Protection Enables Highly Efficient and Stable All-Inorganic Perovskite Composites for Light-Emitting-Diodes

Unusual Stability and Temperature-Dependent Properties of Highly Emissive CsPbBr 3 Perovskite Nanocrystals Obtained from in Situ Crystallization in Poly(vinylidene difluoride).

Thermal polymerization synthesis of CsPbBr3 perovskite-quantum-dots@copolymer composite: Towards long-term stability and optical phosphor application

Scalable and room-temperature preparation of Cs2HfCl6 double perovskites with recorded photoluminescence efficiency and robust stability

Ultrastable Emissive Perovskite Nanocomposite Via Dual Protection of Polymer-Grafted TS-1 Zeolite for Backlight Display Application

A novel in-situ process for high performance blue CsPbBr3 perovskite quantum dots via Cs ion-exchange in Sodium Titanium Silicate