Abstract:Background: Neurosurgical procedures are complex and require years of training and experience. Traditional training on human cadavers is expensive, requires facilities and planning, and raises ethical concerns. Therefore, the use of anthropomorphic phantoms could be an excellent substitute. The aim of the study was to design and develop a patient-specific 3D-skull and brain model with realistic CT-attenuation suitable for conventional and augmented reality (AR)-navigated neurosurgical simulations. Methods: The radiodensity of materials considered for the skull and brain phantoms were investigated using cone beam CT (CBCT) and compared to the radiodensities of the human skull and brain. The mechanical properties of the materials considered were tested in the laboratory and subsequently evaluated by clinically active neurosurgeons. Optimization of the phantom for the intended purposes was performed in a feedback cycle of tests and improvements. Results: The skull, including a complete representation of the nasal cavity and skull base, was 3D printed using polylactic acid with calcium carbonate. The brain was cast using a mixture of water and coolant, with 4 wt% polyvinyl alcohol and 0.1 wt% barium sulfate, in a mold obtained from segmentation of CBCT and T1 weighted MR images from a cadaver. The experiments revealed that the radiodensities of the skull and brain phantoms were 547 and 38 Hounsfield units (HU), as compared to real skull bone and brain tissues with values of around 1300 and 30 HU, respectively. As for the mechanical properties testing, the brain phantom exhibited a similar elasticity to real brain tissue. The phantom was subsequently evaluated by neurosurgeons in simulations of endonasal skull-base surgery, brain biopsies, and external ventricular drain (EVD) placement and found to fulfill the requirements of a surgical phantom. Conclusions: A realistic and CT-compatible anthropomorphic head phantom was designed and successfully used for simulated augmented reality-led neurosurgical procedures. The anatomic details of the skull base and brain were realistically reproduced. This phantom can easily be manufactured and used for surgical training at a low cost.

Advancing 3-Dimensional Printed Burr Hole and Craniotomy Models for Neurosurgical Simulation Through Multimaterial Methods

Comparative analysis of mechanical and drilling properties: Human skull vs. 3D-printed replicas for neurosurgical training

Three dimensional printing technology in neurosurgery

Development of 3D Printed Craniocerebral Models for Simulated Neurosurgery.

Development of Three-Dimensional Printed Craniocerebral Models for Simulated Neurosurgery.

Real Stiffness and Vividness Reproduction of Anatomic Structures Into the 3-Dimensional Printed Models Contributes to Improved Simulation and Training in Skull Base Surgery

Application of 3D-Printed Craniocerebral Model in Simulated Surgery for Complex Intracranial Lesions

Design and Validation of a 3D Printed Cranio-Facial Simulator: A Novel Tool for Surgical Education

A neurosurgical simulation of skull base tumors using a 3D printed rapid prototyping model containing mesh structures

Step-by-Step Implementation of Three-Dimensional Print Technology in Preoperative Neurosurgery Planning

3D-Printed Disease Models for Neurosurgical Planning, Simulation, and Training

Three-Dimensional Printing in Neurosurgery: A Review of Current Indications and Applications and a Basic Methodology for Creating a Three-Dimensional Printed Model for the Neurosurgical Practice

Preparation of Simulate Craniocerebral Models Via Three Dimensional Printing Technique

A feasibility study of several 3D printing methods for applications in epilepsy surgery

Evaluation of polyethylene terephthalate glycol (PETG), Simubone™, and photopolymer resin as 3D printed temporal bone models for surgical simulation

3D Printing-Assisted Skull Base Tumor Surgeries: An Institutional Experience

Development of Three-Dimensional Brain Arteriovenous Malformation Model for Patient Communication and Young Neurosurgeon Education

3D Printing Technology-Assisted Endoscopy Surgery in the Treatment of Skull Base Tumors : A retrospective study

The manufacturing procedure of 3D printed models for endoscopic endonasal transsphenoidal pituitary surgery

Retrosigmoid Craniectomy and Suprameatal Drilling-3-Dimensionally Printed Microneurosurgical Simulation: 2-Dimensional Operative Video

Development of a CT-Compatible, Anthropomorphic Skull and Brain Phantom for Neurosurgical Planning, Training, and Simulation