Abstract:In recent years, there has been a rapid growth in new technologies within nuclear medicine and PET diagnostics, particularly in the field of radiopharmaceutical dose preparation. These advancements are driven by the integration of automatic algorithms into the process. This evolution has brought about significant improvements in the efficiency and accuracy of radiopharmaceutical dose preparation. These automatic algorithms utilize state-of-the-art technologies to streamline the process and ensure precise and tailored doses for patients. The integration of these advanced technologies has revolutionized the field, allowing for more effective and personalized treatment options in nuclear medicine and PET diagnostics. By employing automatic radiopharmaceutical dose dispensers (ARDDs), radiation exposure to technologists is minimized while also mitigating the risk of potential infections for patients. Ionization chambers are currently the most used detectors to measure the activity of radiopharmaceuticals in ARDDs. However, they present certain limitations, including size constraints. This study is part of an international endeavor to develop a new approach for evaluating radiopharmaceutical activity in an ARDD named KAR l 100 . A new approach was used to develop a scintillation detector by linking a PVT detector to a SiPMs array consisting of four elements, each having an active surface of 6 × 6 mm with a bias voltage of 30 V. The detection system's amplified output was then fed to a single-channel analyzer called Enviro, developed by Tema Sinergie S.p.A in Italy. The counts per second (CPS) detected by the detector were studied using WinTAM software allowing for the radionuclide's activity concentration to be read out at run-time. Three widely used medical radioisotopes, 18 F, 11 C and 68 Ga, were used to evaluate the performance of the detector in terms of linearity and repeatability of the measurements. Half-life and linear response were evaluated over a wide range of activities with different decay schemes. Data analysis was conducted, resulting in half-lives of the 18 F, 11 C and 68 Ga radioisotopes of 109.75 ± 0.35, 20.62 ± 0.34 and 67.82 ± 0.25 min, respectively, with calculated deviations of 0.0167%, 1.00% and 0.29% from expected values. The linear response of the detector over the entire range of desired activity concentrations was confirmed after data correction for the detector dead time. Calibration of the detector combined with the dispenser system was carried out in parallel investigations to provide the required device properties for reference applications in nuclear medicine. Furthermore, Monte Carlo simulations using FLUKA code were performed to investigate the contribution of beta particles in addition to gamma radiations to assess the influence of beta particles on the calibration factors. For better accuracy, a shielding was designed to prevent any beta particles from reaching the detector.

Ultra-fast, selective and pseudo-quantitative analysis of 99Tc in nuclear waste for screening purposes

Ultra-fast, selective and pseudo-quantitative analysis of 99 Tc in nuclear waste for screening purposes

Recyclable Robust Plastic Scintillation Resin Achieving the Exceptional Separation and Detection of Technetium‐99

Optimization of a new radiochemical method based on extraction chromatographic resins and plastic scintillation for measurement of 90Sr in nuclear waste

Quantification of technetium-99 in wastewater by means of automated on-line extraction chromatography – anion-exchange chromatography – inductively coupled plasma-mass spectrometry.

Development and validation of an alternative procedure for quantitative quality control analysis of 99mTc-radiopharmaceuticals using a Geiger Müller counter

Mechanism Unravelling for Ultrafast and Selective 99tco4 - Uptake by a Radiation-Resistant Cationic Covalent Organic Framework: a Combined Radiological Experiment and Molecular Dynamics Simulation Study.

Determination of 90Sr in highly radioactive aqueous samples via conversion to a kinetically stable 1,4,7,10-tetraazacyclododecane-1,4,7,10-tetraacetic acid complex followed by concentration–separation–fractionation based on capillary electrophoresis–liquid scintillation

Optimization of the radiochemical separation and determination for 147Pm and 151Sm in nuclear waste samples

Quantification of [99Tc]TcO4- in urine by means of anion-exchange chromatography–aerosol desolvation nebulization–inductively coupled plasma–mass spectrometry

Rapid Determination of Ultra-Trace Plutonium Isotopes (239pu, 240pu and 241pu) in Small-Volume Human Urine Bioassay Using Sector-Field Inductively Coupled Plasma Mass Spectrometry.

Ultratrace Determination of 99Tc in Small Natural Water Samples by Accelerator Mass Spectrometry with the Gas-Filled Analyzing Magnet System

Assessment of Radioecologically Relevant Radionuclides 14C, 99Tc, and 129I in Vitrified High-Level Nuclear Wastes from Spent Fuel Reprocessing

Using a High-Throughput Screening Algorithm and relativistic Density Functional Theory to Find Chelating Agents for Separation of Radioactive Waste

Nanotrap Infused Ultrathin Hybrid Composite Material for Rapid and Highly Selective Entrapment of 99TcO4-

Recent progress in separation of technetium-99 from spent nuclear fuel and radioactive waste. Challenges and prospects

A novel method for accurate and real-time quantification of radiopharmaceutical activity in automated dose dispensers

99 TcO 4 – Separation through Selective Crystallization Assisted by Polydentate Benzene-Aminoguanidinium Ligands

Sensitive imaging of actinide materials in shielded radioactive waste

Quaternary Phosphonium Modified Cellulose Microsphere Adsorbent for 99tc Decontamination with Ultra-High Selectivity

Determination of Np, Pu and Am in High Level Radioactive Waste with Extraction-Liquid Scintillation Counting