Clinical problem-solving--where did good old clinical diagnosis go?

E. Greeno

IF: 158.5

New England Journal of Medicine

Abstract:

What problem does this paper attempt to address?

Self‐Healing Silk Fibroin‐Based Hydrogel for Bone Regeneration: Dynamic Metal‐Ligand Self‐Assembly Approach

Liyang Shi,Fanlu Wang,Wei Zhu,Zongpu Xu,Sabine Fuchs,Joens Hilborn,Liangjun Zhu,Qi Ma,Yingjie Wang,Xisheng Weng,Dmitri A. Ossipov

DOI: https://doi.org/10.1002/adfm.201700591

IF: 19

2017-01-01

Advanced Functional Materials

Abstract:Despite advances in the development of silk fibroin (SF)‐based hydrogels, current methods for SF gelation show significant limitations such as lack of reversible crosslinking, use of nonphysiological conditions, and difficulties in controlling gelation time. In the present study, a strategy based on dynamic metal‐ligand coordination chemistry is developed to assemble SF‐based hydrogel under physiological conditions between SF microfibers (mSF) and a polysaccharide binder. The presented SF‐based hydrogel exhibits shear‐thinning and autonomous self‐healing properties, thereby enabling the filling of irregularly shaped tissue defects without gel fragmentation. A biomineralization approach is used to generate calcium phosphate‐coated mSF, which is chelated by bisphosphonate ligands of the binder to form reversible crosslinkages. Robust dually crosslinked (DC) hydrogel is obtained through photopolymerization of acrylamide groups of the binder. DC SF‐based hydrogel supports stem cell proliferation in vitro and accelerates bone regeneration in cranial critical size defects without any additional morphogenes delivered. The developed self‐healing and photopolymerizable SF‐based hydrogel possesses significant potential for bone regeneration application with the advantages of injectability and fit‐to‐shape molding.
A Method to Construct a High Mechanical Property’s Silk Fibroin/Hydroxyapatite Scaffold

徐水,张胡静,张海萍,杨明英,朱良均

DOI: https://doi.org/10.16865/j.cnki.1000-7555.2011.10.039

2011-01-01

Abstract:The fibroin/hydroxyapatite scaffold was successfully prepared by dissolving fibroin and hydroxyapatite in the phosphate buffer,cross-linked by glutaral dehyde in moderate condition,which possesses both crystalline structure and β parallel.This study offered a potential benefits for the exploration and utilization of fibroin in the artificial bone.The result shows that the maximum and compressive strength of this scaffold can attain about 48.087MPa and 1.44MPa,respectively,when the ration of fibroin/hydroxyapatite is 6/4.The porosity is 70%.The pore size range is from 50 um to 200 um.All the results suggest this new method highly promotes the scaffold′s mechanical,approaching the cancellous bone of human.
High biocompatible bone screw enabled by a rapid and robust chitosan/silk fibroin composite material

Meng Yu,Renyan Huang,Jiahui Hua,Min Ru,Renchuan You,Ying Huang,Shuqin Yan,Qiang Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2024.131519

Abstract:Hydrogel has attracted tremendous attentions due to its excellent biocompatibility and adaptability in biomedical field. However, it is challenging by the conflicts between inadequate mechanical properties and service requirements. Herein, a rapid and robust hydrogel was developed by interpenetrating networks between chitosan and silk fibroin macromolecules. Thanks to these unique networks, the chitosan-based hydrogel exhibited superior mechanical performances. The maximum breaking strength, Young's modulus and swelling ratio of the hydrogel were 1187.8 kPa, 383.1 MPa and 4.5 % respectively. The hydrogel also supported the proliferation of human umbilical vein endothelial cells for 7 days. Notably, the hydrogel was easily molded into bone screw, and demonstrated compressive strengths of 45.7 MPa, Young's modulus of 675.6 MPa, respectively. After 49-day biodegradation, the residual rate of the screw in collagenase I solution was up to 89.6 % of the initial weight. In vitro, the screws not only had high resistance to biodegradation, but also had outstanding biocompatibility of osteoblast. This study provided a promising physical-chemical double crosslinking strategy to build orthopedic materials, holding a great potential in biomedical devices.
Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Lin Liu,Jinying Liu,Mingqi Wang,Sijia Min,Yurong Cai,Liangjun Zhu,Juming Yao

DOI: https://doi.org/10.1163/156856208783721010

2008-01-01

Abstract:Novel tissue engineering scaffold materials of nano-hydroxyapatite (nHA)/silk fibroin (SF) biocomposite were prepared by freeze-drying. The needle-like nHA crystals of about 10 nm in diameter by 50-80 nm in length, which were uniformly distributed in the porous nHA/SF scaffolds, were prepared by a co-precipitation method with a size. The as-prepared nHA/SF scaffolds showed good homogeneity, interconnected pores and high porosity. XRD and FT-IR analysis suggested that the silk fibroin was in beta-sheet structure, which usually provides outstanding mechanical properties for silk materials. In this work, composite scaffolds containing as high as 70% (w/w) nHA were prepared, which had excellent compressive modulus and strength, higher than the scaffolds at low nHA content level and other porous biodegradable polymeric scaffolds often considered in bone-related tissue engineering reported previously. The cell compatibility of composite scaffolds was evaluated through cell viability by MTT assay. All these results indicated that these nHA/SF scaffold materials may be a promising biomaterial for bone tissue engineering.
Silk as a potential candidate for bone tissue engineering

Fatemeh Mottaghitalab,Hossein Hosseinkhani,Mohammad Ali Shokrgozar,Chuanbin Mao,Mingying Yang,Mehdi Farokhi

DOI: https://doi.org/10.1016/j.jconrel.2015.07.031

IF: 11.467

2015-01-01

Journal of Controlled Release

Abstract:Regeneration of large bone defects is challenging in the next few years because the age of the population is growing. Bone grafting as a gold standard of bone repairing is limited as a result of many disadvantages. In recent years, many novel materials and processing methods have been introduced to construct the native bone extracellular matrix (ECM) and restore the functions of degenerated bone. Silk fibroin (SF) as a natural polymer, has established a good reputation for bone tissue engineering applications due to its many unique properties, including exceptional biocompatibility, biodegradability, mechanical behavior, and ease of processability. In this review, recent advances in the design and application of SF-based scaffolds for bone regeneration are discussed.
Physically Crosslinked Biocompatible Silk‐Fibroin‐Based Hydrogels with High Mechanical Performance

kunyuan luo,yuhong yang,zhengzhong shao

DOI: https://doi.org/10.1002/adfm.201503450

IF: 19

2016-01-01

Advanced Functional Materials

Abstract:Developing hydrogel which combines superior mechanical performance and biocompatibility attracts researchers' attention in recent years. Here, a novel biocompatible hydrogel with excellent mechanical performance, comprised of regenerated silk fibroin (RSF) and hydroxypropyl methyl cellulose (HPMC), is fabricated by simply mixing and heating. It is found that both of compressive modulus and tensile modulus of the optimal RSF/HPMC hydrogel are over 1.0 MPa. Meanwhile, the break energy is up to 3500 J m(-2), which is higher than that of some natural elastomers, such as cartilage, cork, and skin. The investigation of gelation mechanism reveals that more uniformly dispersed crosslinks dominated by smaller -sheet structures, which is attributed to the synergistic effects of hydrogen bonding and hydrophobic interaction between HPMC and RSF molecules, contribute to the superior mechanical performance of RSF/HPMC hydrogel. This biocompatible high strength silk protein based hydrogel diversifies the robust hydrogels and holds a great promise as candidates for load-bearing materials in biomedical field.
Preparation of silk fibroin/hyaluronic acid hydrogels with enhanced mechanical performance by a combination of physical and enzymatic crosslinking

Xiaohang Qu,Ling Yan,Shuang Liu,Yunfei Tan,Jing Xiao,Yuan Cao,Ke Chen,Wenqian Xiao,Bo Li,Xiaoling Liao

DOI: https://doi.org/10.1080/09205063.2021.1932070

2021-06-24

Abstract:Silk fibroin (SF) from Bombyx mori is a natural polymer with exceptional biocompatibility, low immunogenicity, and ease of processability. SF-based hydrogels have been identified as one of the most attractive candidate scaffolds for tissue engineering and can be fabricated through various physical or chemical crosslinking approaches. However, conventional SF hydrogels may suffer from several major drawbacks, such as structural inhomogeneity, poor mechanical properties or utilization of cytotoxic reagents. Herein, a dually crosslinked SF-based composite hydrogel with enhanced strength and elasticity was fabricated by inducing the formation of uniform and small β-sheet structures by sonication in a restricted enzymatic precrosslinked network. The composite hydrogel not only demonstrated concentration-dependent stiffness variation but also exhibited time-dependent changes in toughness behavior. Moreover, subsequent experimental results revealed that the hydrogels exhibit other advantages, including high water retention capacity and long-term stability under physiological conditions. Finally, a three-dimensional (3 D) construct of the cell-laden hydrogel was fabricated, confirming that the composite hydrogel could provide a biocompatible microenvironment with dynamically changing mechanical properties. The combination of physical and enzymatic crosslinking strategies contributes to a biocompatible composite hydrogel with unique mechanical properties that holds great potential for use in tissue engineering and regenerative medicine.

engineering, biomedical,materials science, biomaterials,polymer science
Controllable Production of Natural Silk Nanofibrils for Reinforcing Silk-Based Orthopedic Screws

Shuqin Yan,Li He,Abdul Moqeet Hai,Zhanao Hu,Renchuan You,Qiang Zhang,David L. Kaplan

DOI: https://doi.org/10.3390/polym15071645

IF: 5

2023-03-26

Polymers

Abstract:As a natural high-performance material with a unique hierarchical structure, silk is endowed with superior mechanical properties. However, the current approaches towards producing regenerated silk fibroin (SF) for the preparation of biomedical devices fail to fully exploit the mechanical potential of native silk materials. In this study, using a top-down approach, we exfoliated natural silk fibers into silk nanofibrils (SNFs), through the disintegration of interfibrillar binding forces. The as-prepared SNFs were employed to reinforce the regenerated SF solution to fabricate orthopedic screws with outstanding mechanical properties (compression modulus > 1.1 GPa in a hydrated state). Remarkably, these screws exhibited tunable biodegradation and high cytocompatibility. After 28 days of degradation in protease XIV solution, the weight loss of the screw was ~20% of the original weight. The screws offered a favorable microenvironment to human bone marrow mesenchymal stem cell growth and spread as determined by live/dead staining, F-action staining, and Alamar blue staining. The synergy between native structural components (SNFs) and regenerated SF solutions to form bionanocomposites provides a promising design strategy for the fabrication of biomedical devices with improved performance.

polymer science
Investigation on the Structure and Mechanical Properties of Highly Tunable Elastomeric Silk Fibroin Hydrogels Cross-Linked by γ-Ray Radiation.

Nier Wu,Huilei Yu,Muyang Sun,Zong Li,Fengyuan Zhao,Yingfang Ao,Haifeng Chen

DOI: https://doi.org/10.1021/acsabm.9b01062

2020-01-01

ACS Applied Bio Materials

Abstract:Silk fibroin (SF) is a natural polymer with low immunogenicity and good biocompatibility. However, most silk-based hydrogels formed through chemical or physical cross-linking are brittle, the preparation of which also inevitably introduces cytotoxic cross-linking agents. Herein, a simple strategy is presented for synthesizing SF hydrogels with tunable mechanical properties by combining γ-ray radiation with ethanol treatment. Neither toxic initiators nor chemical agents are utilized during the whole preparation procedure. For "soft" hydrogels, the compressive moduli are less than 29 kPa (SF-S hydrogels), while for "tough" hydrogels, the compressive moduli are between 1.21 and 2.41 MPa (SF-D hydrogels). Specifically, γ-ray radiation makes SF form uniform and stable chemical cross-linking sites within and between molecular chains, resulting in "soft" and highly elastic SF hydrogels. The physical cross-linking via ethanol treatment leads to the self-assembly of fibroin chains, transforming those soft hydrogels to tough hydrogels. These double cross-linked SF hydrogels (SF-D hydrogels) exhibit excellent mechanical strength. Effects of various cross-linking conditions on the secondary structure, pore structure, mechanical properties, gelation degree, swelling, and in vitro degradation properties are explored. A series of cell experiments demonstrate that the SF hydrogels with different mechanical strength can stimulate the expression of specific genes of rat bone marrow mesenchymal stem cells (BMSCs) in various differentiation directions. These results also show the application prospects in tissue engineering by customizing hydrogels for the mechanical strength of different tissues.
Robust Bioactive Protein-Based Screws with Dual Crosslinked Network for Internal Bone Fixation

Qi-Chen Zhang,Wang Ding,Sheng-Long Ding,Qing-Bing Meng,Di-Han Su,Tai-Wei Zhang,Qing Chen,Rui-Xian Lian,Ming-Dong Zhao,Bao-Qing Yu,Xi-Lei Li,Yu-Lin li,Li-Bo Jiang

DOI: https://doi.org/10.1016/j.compositesb.2022.109884

2022-01-01

Abstract:Resorbable fixation systems have gained interest in orthopedics by avoiding secondary surgery and stress shielding, but lack of enough bioactivity. Herein, we fabricated resorbable and bioactive regenerated silk fibroin/ gelatin (RSF/G) screws with dual physically and chemically crosslinked networks, which can control the release of Arg-Gly-Asp (RGD) peptide and bear pull-out and shear forces comparable to those of pure RSF and commercial poly (lactic-co-glycolic acid) devices under dry and wet conditions. The controllable swelling properties of the RSF/G screws support implantation although with the high hydrophilic gelatin. Compared to RSF screws, the RSF/G screws have better bioactivity and significantly promote cell proliferation, adhesion, spreading and osteogenic differentiation by RGD-integrin interactions via the focal adhesion kinase/extracellular signal regulated (FAK/ERK) pathway. Eight weeks after implantation in rats, the RSF/G screws with magnetic resonance imaging(MRI) compatibility remained fixed with tight contact, less inflammatory reaction and more new bone formation compared with pure RSF screws. The results indicate great promise for the application of RSF/G screws in bone fracture fixation.
Processing, mechanical properties and bio-applications of silk fibroin-based high-strength hydrogels

Yu Zhao,Zhi Shou Zhu,Juan Guan,Su Jun Wu

DOI: https://doi.org/10.1016/j.actbio.2021.02.018

IF: 10.633

2021-04-01

Acta Biomaterialia

Abstract:Hydrogels are an attractive class of materials that possess similar structural and functional characteristics to wet biological tissues and demonstrate a diversity of applications in biomedical engineering. Silk fibroin (SF) is a unique natural polymer due to its fibrous protein nature, versatile formats, biocompatibility, tunable biodegradation and is thus a good hydrogel candidate for bio-applications. Compared to synthetic polymer hydrogels, poor mechanical performance is still a fatal drawback that hinders the application of SF hydrogels as structural materials. Researchers have attempted to develop strategies to construct silk fibroin-based high-strength hydrogels (SF-HSHs). Herein, we firstly provide an overview of the approaches of processing SF-HSHs with a focus on the physical/non-covalent crosslinking mechanisms. The examples of SF-HSHs are discussed in detail under four categories, including physical-crosslinked, dual-crosslinked, double network and composite hydrogels respectively. A brief section follows to elucidate on the gelation mechanisms of SF-HSHs before a description of the utility of SF-HSHs in biomedicine and devices is presented. Finally, the potential challenges and future development of SF-HSHs are briefly discussed. This review aims to enhance our understanding of the structure-mechanical property-function relationships of soft materials made from natural polymers and guide future research of silk fibroin-based hydrogels for biomedical applications.

engineering, biomedical,materials science, biomaterials
Silk fibroin hydrogel membranes prepared by a sequential cross-linking strategy for guided bone regeneration

Yuan Wang,Zhenyu Yang,Xi Chen,Xiaofeng Jiang,Gang Fu

DOI: https://doi.org/10.1016/j.jmbbm.2023.106133

Abstract:Silk fibroin hydrogel is a widely used material for tissue engineering. However, its mechanical properties are the main obstacle to its application to medical bone regeneration barrier membranes. Here, we developed a new hydrogel membrane for guided bone regeneration (GBR). In this study, a sequential crosslinking strategy including photo crosslinking and organic solvent (ethanol) treatment was used to obtain silk fibroin hydrogel membrane (EA-SF). The mechanical properties of EA-SF were significantly enhanced compared to the hydrogel prepared only by photocrosslinking (E-SF). The compressive and tensile strengths of the hydrogel film treated with 75% ethanol for 6 h were 1.18 ± 0.36 MPa and 0.43 ± 0.03 MPa, respectively. In vitro cell culture results showed that EA-SF has good biocompatibility and can effectively shield fibroblasts (L929). EA-SF also has excellent in vitro protein hydrolysis stability. In vivo experiments (subcutaneous implantation and calvarial defect experiment) confirmed the stability and barrier functionality of EA-SF. In conclusion, this study demonstrated that ethanol could improve the mechanical properties of silk fibroin hydrogel and extend the scope of their application, making silk fibroin hydrogel a promising GBR material.
Investigation On The Structure And Mechanical Properties Of Highly Tunable Elastomeric Silk Fibroin Hydrogels Cross-Linked By Gamma-Ray Radiation

Nier Wu,Huilei Yu,Muyang Sun,Zong Li,Fengyuan Zhao,Yingfang Ao,Haifeng Chen

DOI: https://doi.org/10.1021/acsabm.9b01062

2020-01-01

ACS Applied Bio Materials

Abstract:Silk fibroin (SF) is a natural polymer with low immunogenicity and good biocompatibility. However, most silk-based hydrogels formed through chemical or physical cross-linking are brittle, the preparation of which also inevitably introduces cytotoxic cross-linking agents. Herein, a simple strategy is presented for synthesizing SF hydrogels with tunable mechanical properties by combining gamma-ray radiation with ethanol treatment. Neither toxic initiators nor chemical agents are utilized during the whole preparation procedure. For "soft" hydrogels, the compressive moduli are less than 29 kPa (SF-S hydrogels), while for "tough" hydrogels, the compressive moduli are between 1.21 and 2.41 MPa (SF-D hydrogels). Specifically, gamma-ray radiation makes SF form uniform and stable chemical cross-linking sites within and between molecular chains, resulting in "soft" and highly elastic SF hydrogels. The physical cross-linking via ethanol treatment leads to the self-assembly of fibroin chains, transforming those soft hydrogels to tough hydrogels. These double cross-linked SF hydrogels (SF-D hydrogels) exhibit excellent mechanical strength. Effects of various cross-linking conditions on the secondary structure, pore structure, mechanical properties, gelation degree, swelling, and in vitro degradation properties are explored. A series of cell experiments demonstrate that the SF hydrogels with different mechanical strength can stimulate the expression of specific genes of rat bone marrow mesenchymal stem cells (BMSCs) in various differentiation directions. These results also show the application prospects in tissue engineering by customizing hydrogels for the mechanical strength of different tissues.
Preparation of bacterial cellulose/silk fibroin double-network hydrogel with high mechanical strength and biocompatibility for artificial cartilage

Ke Wang,Qian Ma,Yuan-Ming Zhang,Guang-Ting Han,Cai-Xin Qu,Shu-Dong Wang

DOI: https://doi.org/10.1007/s10570-019-02869-0

IF: 6.123

2019-12-18

Cellulose

Abstract:Bacterial cellulose (BC) and silk fibroin (SF) double-network hydrogel with high mechanical strength and biocompatibility was synthesized by using BC as the novel polymer substrate to absorb aqueous SF solution as the modifier. Fundamental physical characterizations were carried out by scanning electron microscopy, energy dispersive spectrometry, fourier transform infrared spectrometry, X-ray diffraction and X-ray photoelectron spectroscopy. Thermogravimetric and differential thermal analysis was used to investigate the stability of the hydrogel. Strength and biocompatibility of the BC/SF hydrogel for cartilage tissue engineering were evaluated by tensile strength tester and cell culture experiments. Results reveal that the BC/SF double-network hydrogel was prepared successfully, and the hydrogel could be used as a cartilage repair material in clinical application.<h3 class="Heading">Graphic abstract</h3> <a href="https://media.springernature.com/original/springer-static/image/art%3A10.1007%2Fs10570-019-02869-0/MediaObjects/10570_2019_2869_Figa_HTML.png">Open image in new window</a>

materials science, textiles,polymer science, paper & wood
Biomimetic Silk Fibroin Hydrogels Strengthened by Silica Nanoparticles Distributed Nanofibers Facilitate Bone Repair

Yuet Cheng,Gu Cheng,Congyong Xie,Chengcheng Yin,Xiangyang Dong,Zhi Li,Xue Zhou,Qun Wang,Hongbing Deng,Zubing Li,Yuet Cheng,Gu Cheng,Congyong Xie,Chengcheng Yin,Xiangyang Dong,Zhi Li,Xue Zhou,Qun Wang,Hongbing Deng,Zubing Li

DOI: https://doi.org/10.1002/adhm.202001646

IF: 10

2021-03-10

Advanced Healthcare Materials

Abstract:Various materials are utilized as artificial substitutes for bone repair. In this study, a silk fibroin (SF) hydrogel reinforced by short silica nanoparticles (SiNPs)‐distributed‐silk fibroin nanofibers (SiNPs@NFs), which exhibits a superior osteoinductive property, is fabricated for treating bone defects. SF acts as the base part of the composite scaffold to mimic the extracellular matrix (ECM), which is the organic component of a native bone. The distribution of SiNPs clusters within the composite hydrogel partially mimics the distribution of mineral crystals within the ECM. Incorporation of SiNPs@NFs enhances the mechanical properties of the composite hydrogel. In addition, the composite hydrogel provides a biocompatible microenvironment for cell adhesion, proliferation, and osteogenic differentiation in vitro. In vivo studies confirm that the successful repair is achieved with the formation of a large amount of new bone in the large‐sized cranial defects that are treated with the composite hydrogel. In conclusion, the SiNPs@NFs‐reinforced‐hydrogel fabricated in this study has the potential for use in bone tissue engineering.

nanoscience & nanotechnology,engineering, biomedical,materials science, biomaterials
A bioinspired mineral-organic composite hydrogel as a self-healable and mechanically robust bone graft for promoting bone regeneration

Shumeng Bai,Mengya Zhang,Xiaowei Huang,Xueliang Zhang,Chunhua Lu,Jibin Song,Huanghao Yang

DOI: https://doi.org/10.1016/j.cej.2020.127512

IF: 15.1

2021-06-01

Chemical Engineering Journal

Abstract:Despite advances in the development of osteo-regenerative biomaterials, current products are vulnerable to stress-induced formation of cracks, resulting in the loss of functionality and a limited lifespan. In the present study, a strategy based on host-guest assembly was developed to fabricate a silk fibroin-based inorganic-organic hybrid hydrogel (termed SF@HG@HA) in which silk fibroin was used as a polymer template to tether host (β-cyclodextrin) and guest (cholesterol) monomers, respectively. Due to dynamic host-guest interactions, the prepared hydrogel could repair itself spontaneously when damaged, without the assistance of any external stimuli, mimicking the self-healing characteristics of native bone tissue. Furthermore, the efficient energy dissipation mechanism provided by the host-guest crosslinking strategy endowed the hydrogel with robust mechanical properties to bear substantial mechanical loading. SF@HG@HA was shown to support cell proliferation and osteogenic differentiation in vitro and accelerate bone regeneration in critical-size rat femoral defects in vivo. Together, the silk fibroin-based self-healing hydrogel with robust mechanical properties shows potential applications in the reconstruction of bone defects, which may provide new directions for the design of functional biomaterials for tissue regeneration.

engineering, chemical, environmental
Enhanced Silk Fibroin/Sericin Composite Film: Preparation, Mechanical Properties and Mineralization Activity

Meng Li,Wei Tian,Yao Zhang,Hui Song,Yangxiao Yu,Xiangshang Chen,Nan Yong,Xiuzhen Li,Yin Yin,Qingmin Fan,Jiannan Wang

DOI: https://doi.org/10.3390/polym14122466

IF: 5

2022-06-18

Polymers

Abstract:The periosteum plays an important role in bone formation and reconstruction. One of the reasons for the high failure rate of bone transplantation is the absence of the periosteum. Silk fibroin (SF) and silk sericin (SS) have excellent biocompatibility and physicochemical properties, which have amazing application prospects in bone tissue engineering, but lacked mechanical properties. We developed a series of SF/SS composite films with improved mechanical properties using boiling water degumming, which caused little damage to SF molecular chains to retain larger molecules. The Fourier transform infrared spectroscopy and X-ray diffraction results showed that there were more β-sheets in SF/SS films than in Na2CO3 degummed SF film, resulting in significantly improved breaking strength and toughness of the composite films, which were increased by approximately 1.3 and 1.7 times, respectively. The mineralization results showed that the hydroxyapatite (HAp) deposition rate on SF/SS composite films was faster than that on SF film. The SF/SS composite films effectively regulated the nucleation, growth and aggregation of HAp-like minerals, and the presence of SS accelerated the early mineralization of SF-based materials. These composite films may be promising biomaterials in the repair and regeneration of periosteum.

polymer science
High‐Strength, Durable All‐Silk Fibroin Hydrogels with Versatile Processability Toward Multifunctional Applications

Zhenghua Zhu,Shengjie Ling,Jingjie Yeo,Siwei Zhao,Lorenzo Tozzi,Markus J. Buehler,Fiorenzo Omenetto,Chunmei Li,David L. Kaplan

DOI: https://doi.org/10.1002/adfm.201704757

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:Hydrogels are the focus of extensive research due to their potential use in fields including biomedical, pharmaceutical, biosensors, and cosmetics. However, the general weak mechanical properties of hydrogels limit their utility. Here, pristine silk fibroin (SF) hydrogels with excellent mechanical properties are generated via a binary‐solvent‐induced conformation transition (BSICT) strategy. In this method, the conformational transition of SF is regulated by moderate binary solvent diffusion and SF/solvent interactions. β‐sheet formation serves as the physical crosslinks that connect disparate protein chains to form continuous 3D hydrogel networks, avoiding complex chemical and/or physical treatments. The Young's modulus of these new BSICT–SF hydrogels can reach up to 6.5 ± 0.2 MPa, tens to hundreds of times higher than that of conventional hydrogels (0.01–0.1 MPa). These new materials fill the “empty soft materials' space” in the elastic modulus/strain Ashby plot. More remarkably, the BSICT–SF hydrogels can be processed into different constructions through different polymer and/or metal‐based processing techniques, such as molding, laser cutting, and machining. Thus, these new hydrogel systems exhibit potential utility in many biomedical and engineering fields.
Meso-reconstructed Silk Fibroin/iron Oxide Nanoparticle Composites Dominated by Silk I Structures Through Unidirectional Nanopore Dehydration for Potential Application in Bone Regeneration

Hengda Wang,Yalikun Yusufu,Lanlan Wang,Jian Gan,Meng Zhang,Jiayu Gu,Kai Lan,Peng Wang,Caoxing Huang

DOI: https://doi.org/10.1007/s42114-024-00888-5

IF: 11.806

2024-01-01

Advanced Composites and Hybrid Materials

Abstract:Silk fibroin (SF), an innovative bioactive material widely used in tissue engineering, is commonly employed to construct biological scaffolds. Conventional approaches for fabricating water-insoluble SF-based films, such as evaporative dehydration and induced annealing with organic solvents, often result in membranes dominated by silk II structures with poor ductility and intricate preparation processes. In this study, inspired by the self-assembly behavior observed in SF solution during dialysis, we developed a unidirectional nanopore dehydration (UND) method to prepare SF-based membranes (SFMU) dominated by silk I structures. The SF solution underwent direct dehydration through UND, yielding enhanced water stability. Furthermore, to enhance the overall properties of SFMU and apply it to the field of bone tissue engineering, biocompatible iron oxide nanoparticles (IONPs) were incorporated into SFMU, leading to the creation of three types of SFMU-IONPs by varying the added IONP amounts. The results demonstrated that SFMU-IONPs formed water-insoluble silk I structures with a lower elastic modulus, and the addition of IONPs endowed neat SFMU with improved structural order, porosity, and mechanical properties. Additionally, SFMU-IONPs demonstrated exceptional biocompatibility towards pre-osteoblast cell line MC3T3-E1 as evidenced by their non-toxic effects on cell viability and attachment. Taken together, SFMU-IONPs with enhanced properties could serve as promising repair composite membranes for bone regeneration in clinical applications.
Silk‐Fabric Reinforced Silk for Artificial Bones

Linlin Lu,Xuqing Liu,Yan Sun,Shujuan Wang,Jiantao Liu,Shengbo Ge,Tongxue Wei,Haiyang Zhang,Jinhui Su,Yingying Zhang,Wei Fan

DOI: https://doi.org/10.1002/adma.202308748

IF: 29.4

2024-02-27

Advanced Materials

Abstract:Bone implants for different body parts require varying mechanical properties, dimensions, and biodegradability rates. Currently, it is still challenging to produce artificial bones with perfect compatibility with human bones. In this study, we report a silk‐fabric reinforced silk material (SFS) composed of pure silk with exceptional biocompatibility, osteogenesis and biodegradability, and demonstrate its outstanding performance as a bone implant material. The SFS was fabricated using a simple hot‐pressing technique, with degummed silk fabric as the reinforcement and silk fibroin as the matrix. The SFS as a self‐reinforced composite, has exceptional mechanical properties due to the almost perfect interface between the matrix and reinforcement. More importantly, its mechanical properties, biodegradability rates and density can be tailored by adjusting the reinforcement structure and the ratio of the reinforcement to the matrix to align with the requirements for bone implantation in different parts of the human body. Besides, the SFS can improve osteoblastic proliferation and increase osteogenic activity, which is not the case with clinically used titanium alloy artificial bone. Therefore, the SFS holds significant potential to replace conventional metal or ceramic implants in the field of medical fracture repair. This article is protected by copyright. All rights reserved

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology

Clinical problem-solving--where did good old clinical diagnosis go?

Self‐Healing Silk Fibroin‐Based Hydrogel for Bone Regeneration: Dynamic Metal‐Ligand Self‐Assembly Approach

A Method to Construct a High Mechanical Property’s Silk Fibroin/Hydroxyapatite Scaffold

High biocompatible bone screw enabled by a rapid and robust chitosan/silk fibroin composite material

Preparation and characterization of nano-hydroxyapatite/silk fibroin porous scaffolds.

Silk as a potential candidate for bone tissue engineering

Physically Crosslinked Biocompatible Silk‐Fibroin‐Based Hydrogels with High Mechanical Performance

Preparation of silk fibroin/hyaluronic acid hydrogels with enhanced mechanical performance by a combination of physical and enzymatic crosslinking

Controllable Production of Natural Silk Nanofibrils for Reinforcing Silk-Based Orthopedic Screws

Investigation on the Structure and Mechanical Properties of Highly Tunable Elastomeric Silk Fibroin Hydrogels Cross-Linked by γ-Ray Radiation.

Robust Bioactive Protein-Based Screws with Dual Crosslinked Network for Internal Bone Fixation

Processing, mechanical properties and bio-applications of silk fibroin-based high-strength hydrogels

Silk fibroin hydrogel membranes prepared by a sequential cross-linking strategy for guided bone regeneration

Investigation On The Structure And Mechanical Properties Of Highly Tunable Elastomeric Silk Fibroin Hydrogels Cross-Linked By Gamma-Ray Radiation

Preparation of bacterial cellulose/silk fibroin double-network hydrogel with high mechanical strength and biocompatibility for artificial cartilage

Biomimetic Silk Fibroin Hydrogels Strengthened by Silica Nanoparticles Distributed Nanofibers Facilitate Bone Repair

A bioinspired mineral-organic composite hydrogel as a self-healable and mechanically robust bone graft for promoting bone regeneration

Enhanced Silk Fibroin/Sericin Composite Film: Preparation, Mechanical Properties and Mineralization Activity

High‐Strength, Durable All‐Silk Fibroin Hydrogels with Versatile Processability Toward Multifunctional Applications

Meso-reconstructed Silk Fibroin/iron Oxide Nanoparticle Composites Dominated by Silk I Structures Through Unidirectional Nanopore Dehydration for Potential Application in Bone Regeneration

Silk‐Fabric Reinforced Silk for Artificial Bones