Aligning Mission and Position in a Critical Policy Leadership Tool: SNRS Nursing Research White Paper Message From the President.

N. Smith-Blair,D. Porche

DOI: https://doi.org/10.1002/nur.21788

2017-02-15

Abstract:

What problem does this paper attempt to address?

Engineering Human Ventricular Heart Muscles Based on a Highly Efficient System for Purification of Human Pluripotent Stem Cell-Derived Ventricular Cardiomyocytes

Bin Li,Hui Yang,Xiaochen Wang,Yongkun Zhan,Wei Sheng,Huanhuan Cai,Haoyang Xin,Qianqian Liang,Ping Zhou,Chao Lu,Ruizhe Qian,Sifeng Chen,Pengyuan Yang,Jianyi Zhang,Weinian Shou,Guoying Huang,Ping Liang,Ning Sun

DOI: https://doi.org/10.1186/s13287-017-0651-x

2017-01-01

Stem Cell Research & Therapy

Abstract:Background Most infarctions occur in the left anterior descending coronary artery and cause myocardium damage of the left ventricle. Although current pluripotent stem cells (PSCs) and directed cardiac differentiation techniques are able to generate fetal-like human cardiomyocytes, isolation of pure ventricular cardiomyocytes has been challenging. For repairing ventricular damage, we aimed to establish a highly efficient purification system to obtain homogeneous ventricular cardiomyocytes and prepare engineered human ventricular heart muscles in a dish. Methods The purification system used TALEN-mediated genomic editing techniques to insert the neomycin or EGFP selection marker directly after the myosin light chain 2 ( MYL2 ) locus in human pluripotent stem cells. Purified early ventricular cardiomyocytes were estimated by immunofluorescence, fluorescence-activated cell sorting, quantitative PCR, microelectrode array, and patch clamp. In subsequent experiments, the mixture of mature MYL2 -positive ventricular cardiomyocytes and mesenchymal cells were cocultured with decellularized natural heart matrix. Histological and electrophysiology analyses of the formed tissues were performed 2 weeks later. Results Human ventricular cardiomyocytes were efficiently isolated based on the purification system using G418 or flow cytometry selection. When combined with the decellularized natural heart matrix as the scaffold, functional human ventricular heart muscles were prepared in a dish. Conclusions These engineered human ventricular muscles can be great tools for regenerative therapy of human ventricular damage as well as drug screening and ventricular-specific disease modeling in the future.
Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues

Lei Gao,Liang Ma,Xiaohong Yin,Yichen Luo,Huayong Yang,Bin Zhang

DOI: https://doi.org/10.1002/smtd.201900669

IF: 12.4

2020-01-01

Small Methods

Abstract:Muscle tissues are characterized by highly organized 3D structures consisting of aligned myocytes and nonmyocytes. Several nano‐ and microfabrication technologies are used to engineer native‐like muscle tissues for muscle regeneration, the treatment of cardiovascular diseases, and in vitro disease modeling. In this paper, traditional tissue engineering methods and novel nano‐/microfabrication technologies for constructing muscle tissues are reviewed. Focus is given on the effects of nano‐/microfabricated architectures on the alignment of cells. In addition, issues of vascularization and cell–cell interaction in fabricating muscle tissues are discussed. Finally, common challenges of fabricating three types of muscle tissues and specific requirements for each type are reviewed, and perspectives are given for future studies.
Engineering Muscle Tissues on Microstructured Polyelectrolyte Multilayer Films

Claire Monge,Kefeng Ren,Kevin Berton,Raphael Guillot,David Peyrade,Catherine Picart

DOI: https://doi.org/10.1089/ten.tea.2012.0079

IF: 4.08

2012-01-01

Tissue Engineering Part A

Abstract:The use of surface coating on biomaterials can render the original substratum with new functionalities that can improve the chemical, physical, and mechanical properties as well as enhance cellular cues such as attachment, proliferation, and differentiation. In this work, we combined biocompatible polydimethylsiloxane (PDMS) with a biomimetic polyelectrolyte multilayer (PEM) film made of poly(L-lysine) and hyaluronic acid (PLL/HA) for skeletal muscle tissue engineering. By microstructuring PDMS in grooves of a different width (5, 10, 30, and 100 μm) and by modulating the stiffness of the (PLL/HA) films, we guided skeletal muscle cell differentiation into myotubes. We found optimal conditions for both the formation of parallel-oriented myotubes and their maturation. Significantly, the myoblasts were collectively prealigned to the grooves before their differentiation. Before fusion, the highest aspect ratio and orientation of nuclei were observed for the 5 and 10 μm wide micropatterns. The formation of myotubes was observed regardless of the size of the micropatterns, and we found that their typical width was 10-12 μm. Their maturation was characterized by the immunolabeling of type II isomyosin. The amount of myosin striation was not affected by the topography, except for the 5 μm wide micropatterns. We highlighted the spatial constraints that led to an important nuclei deformation and further impairment of maturation within the 5 μm grooves. Altogether, our results show that the PEM film combined with PDMS is a powerful tool that is used for skeletal muscle engineering. This work opens perspectives for the development of skeletal muscle tissue in contact with films containing bioactive peptides or growth factors as well as for the study of pathogenic myotubes.
Engineering Stem Cell Fate Controlling Biomaterials to Develop Muscle Connective Tissue Layered Myofibers

Seokgyu Han,Myung Chul Lee,Alejandra Rodríguez-delaRosa,Jiseong Kim,Margot Barroso-Zuppa,Montserrat Pineda-Rosales,Seong Soo Kim,Takaaki Hatanaka,Iman K Yazdi,Nicole Bassous,Indranil Sinha,Olivier Pourquié,Sungsu Park,Su Ryon Shin

DOI: https://doi.org/10.1002/adfm.202304153

2024-01-15

Abstract:Skeletal muscle connective tissue (MCT) surrounds myofiber bundles to provide structural support, produce force transduction from tendons, and regulate satellite cell differentiation during muscle regeneration. Engineered muscle tissue composed of myofibers layered within MCT has not yet been developed. Herein, a bioengineering strategy to create MCT-layered myofibers through the development of stem cell fate-controlling biomaterials that achieve both myogenesis and fibroblast differentiation in a locally controlled manner at the single construct is introduced. The reciprocal role of transforming growth factor-beta 1 (TGF-β1) and its inhibitor as well as 3D matrix stiffness to achieve co-differentiation of MCT fibroblasts and myofibers from a human-induced pluripotent stem cell (hiPSC)-derived paraxial mesoderm is studied. To avoid myogenic inhibition, TGF-β1 is conjugated on the gelatin-based hydrogel to control the fibroblasts' populations locally; the TGF-β1 degrades after 2 weeks, resulting in increased MCT-specific extracellular matrix (ECM) production. The locations of myofibers and fibroblasts are precisely controlled by using photolithography and co-axial wet spinning techniques, which results in the formation of MCT-layered functional myofibers in 3D constructs. This advanced engineering strategy is envisioned as a possible method for obtaining biomimetic human muscle grafts for various biomedical applications.
Application of the Cell Sheet Technique in Tissue Engineering.

Guangnan Chen,Yiying Qi,Lie Niu,Tuoyu Di,Jinwei Zhong,Tingting Fang,Weiqi Yan

DOI: https://doi.org/10.3892/br.2015.522

2015-01-01

Biomedical Reports

Abstract:The development and application of the tissue engineering technique has shown a significant potential in regenerative medicine. However, the limitations of conventional tissue engineering methods (cell suspensions, scaffolds and/or growth factors) restrict its application in certain fields. The novel cell sheet technique can overcome such disadvantages. Cultured cells can be harvested as intact sheets without the use of proteolytic enzymes, such as trypsin or dispase, which can result in cell damage and loss of differentiated phenotypes. The cell sheet is a complete layer, which contains extracellular matrix, ion channel, growth factor receptors, nexin and other important cell surface proteins. Mesenchymal stem cells (MSCs), which have the potential for multiple differentiation, are promising candidate seed cells for tissue engineering. The MSC sheet technique may have potential in the fields of regenerative medicine and tissue engineering in general. Additionally, induced pluripotent stem cell and embryonic stem cell-derived cell sheets have been proposed for tissue regeneration. Currently, the application of cell sheet for tissue reconstruction includes: Direct recipient sites implantation, superposition of cell sheets to construct three-dimensional structure for implantation, or cell sheet combined with scaffolds. The present review discusses the progress in cell sheet techniques, particularly stem cell sheet techniques, in tissue engineering.
Optimization of Culture Media and Cell Ratios for 3D In Vitro Skeletal Muscle Tissues with Endothelial Cells

John Sk Yuen Jr,Brigid M Barrick,Hailey DiCindio,Jaymie A Pietropinto,David L Kaplan

DOI: https://doi.org/10.1021/acsbiomaterials.3c00358

2023-08-14

Abstract:A major challenge of engineering larger macroscale tissues in vitro is the limited diffusion of nutrients and oxygen to the interior. For skeletal muscle, this limitation results in millimeter scale outcomes to avoid necrosis. One method to address this constraint may be to vascularize in vitro-grown muscle tissue, to support nutrient (culture media) flow into the interior of the structure. In this exploratory study, we examine culture conditions that enable myogenic development and endothelial cell survival within tissue engineered 3D muscles. Myoblasts (C2C12s), endothelial cells (HUVECs), and endothelial support cells (C3H 10T1/2s) were seeded into Matrigel-fibrin hydrogels and cast into 3D printed frames to form 3D in vitro skeletal muscle tissues. Our preliminary results suggest that the simultaneous optimization of culture media formulation and cell concentrations is necessary for 3D cultured muscles to exhibit robust myosin heavy chain expression and GFP expression from GFP-transfected endothelial cells. The ability to form differentiated 3D muscles containing endothelial cells is a key step toward achieving vascularized 3D muscle tissues, which have potential use as tissue for implantation in a medical setting, as well as for future foods such as cultivated meats.
Engineered meatballs via scalable skeletal muscle cell expansion and modular micro-tissue assembly using porous gelatin micro-carriers

Ye Liu,Rui Wang,Shijie Ding,Liping Deng,Yuanyuan Zhang,Junyang Li,Ziao Shi,Zhongyuan Wu,Kaini Liang,Xiaojun Yan,Wei Liu,Yanan Du

DOI: https://doi.org/10.1016/j.biomaterials.2022.121615

IF: 14

2022-08-01

Biomaterials

Abstract:The emerging field of cultured meat faces several technical hurdles, including the scale-up production of quality muscle and adipose progenitor cells, and the differentiation and bioengineering of these cellular materials into large, meat-like tissue. Here, we present edible, 3D porous gelatin micro-carriers (PoGelat-MCs), as efficient cell expansion scaffolds, as well as modular tissue-engineering building blocks for lab-grown meat. PoGelat-MC culture in spinner flasks, not only facilitated the scalable expansion of porcine skeletal muscle satellite cells and murine myoblasts, but also triggered their spontaneous myogenesis, in the absence of myogenic reagents. Using 3D-printed mold and transglutaminase, we bio-assembled pork muscle micro-tissues into centimeter-scale meatballs, which exhibited similar mechanical property and higher protein content compared to conventional ground pork meatballs. PoGelat-MCs also supported the expansion and differentiation of 3T3L1 murine pre-adipocytes into mature adipose micro-tissues, which could be used as modular assembly unit for engineered fat-containing meat products. Together, our results highlight PoGelat-MCs, in combination with dynamic bioreactors, as a scalable culture system to produce large quantity of highly-viable muscle and fat micro-tissues, which could be further bio-assembled into ground meat analogues.

engineering, biomedical,materials science, biomaterials
Tissue-Specific Extracellular Matrix Enhances Skeletal Muscle Precursor Cell Expansion And Differentiation For Potential Application In Cell Therapy

Deying Zhang,Yong Zhang,Yuanyuan Zhang,Hualin Yi,Zhan Wang,Rongpei Wu,Dawei He,Guanghui Wei,Shicheng Wei,Yun Hu,Junhong Deng,Tracy Criswell,James Yoo,Yu Zhou,Anthony Atala

DOI: https://doi.org/10.1089/ten.tea.2016.0489

IF: 4.08

2017-01-01

Tissue Engineering Part A

Abstract:Skeletal muscle precursor cells (MPCs) are considered a key candidate for cell therapy in the treatment of skeletal muscle dysfunction due to injury, disease, or age. However, expansion of a sufficient number of functional skeletal muscle cells in vitro from a small tissue biopsy has been challenging due to changes in phenotypic expression of these cells under traditional culture conditions. Thus, the aim of the study was to develop a better culture system for the expansion and myo-differentiation of MPCs that could further be used for therapy. For this purpose, we developed an ideal method of tissue decellularization and compared the ability of different matrices to support MPC growth and differentiation. Porcine-derived skeletal muscle and liver and kidney extracellular matrix (ECM) were generated by decellularization methods consisting of distilled water, 0.2 mg/mL DNase, or 5% fetal bovine serum. Acellular matrices were further homogenized, dissolved, and combined with a hyaluronic acid-based hydrogel decorated with heparin (ECM-HA-HP). The cell proliferation and myogenic differentiation capacity of human MPCs were assessed when grown on gel alone, ECM, or each ECM-HA-HP substrate. Human MPC proliferation was significantly enhanced when cultured on the ECM-HA-HP substrates compared to the other substrates tested, with the greatest proliferation on the muscle ECM-HA-HP (mECM-HA-HP) substrate. The number of differentiated myotubes was significantly increased on the mECM-HA-HP substrate compared to the other gel-ECM substrates, as well as the numbers of MPCs expressing specific myogenic cell markers (i.e., myosin, desmin, myoD, and myf5). In conclusion, skeletal mECM-HA-HP as a culture substrate provided an optimal culture microenvironment potentially due to its similarity to the in vivo environment. These data suggest a potential use of skeletal muscle-derived ECM gel for the expansion and differentiation of human MPCs for cell-based therapy for skeletal muscle dysfunction.
Tissue-specific extracellular matrix promotes myogenic differentiation of human muscle progenitor cells on gelatin and heparin conjugated alginate hydrogels

Hualin Yi,Steven Forsythe,Yunyan He,Qiang Liu,Geng Xiong,Shicheng Wei,Guodong Li,Anthony Atala,Aleksander Skardal,Yuanyuan Zhang

DOI: https://doi.org/10.1016/j.actbio.2017.08.022

IF: 10.633

2017-10-01

Acta Biomaterialia

Abstract:Myogenic differentiation, cell fusion, and myotube formation of skeletal muscle progenitor cells (SMPCs) have key roles during skeletal muscle development and repair. However, after isolation from living tissue and transition to culture dishes, SMPCs gradually lose their function and stop propagating due to the absence of extracellular matrix (ECM). Despite encouraging results of experiments using ECM components in cell culture for maintenance and propagation of some tissue types, the benefits of this approach on SMPC culture are limited, because the bioactive molecules and proteins instantly release and are degraded during culture. In this study, we developed a novel approach to enhance the proliferation and differentiation of human skeletal muscle progenitor cells (hSMPCs) in vitro with skeletal muscle ECM in combination with a modified alginate hydrogel conjugated with gelatin and heparin (Alg-G-H) as a substrate. This Alg-G-H substrate, together with skeletal muscle ECM, significantly enhanced cell expansion, differentiation, and maturation of hSMPCs compared with individual substrata (i.e. gelatin, Matrigel®, or ECM alone). In Western-blot and immunocytochemical analyses, the Alg-G-H-ECM predominantly enhanced expression of skeletal myogenesis markers (MyoD, Myf5, Myogenin, Desmin and Myosin) and myotube formation in hSMPCs. This study demonstrated that combining Alg-G-H substrates with skeletal muscle ECM modulated homeostasis of cell proliferation, differentiation, and maturation of hSMPCs by releasing signaling molecules and growth factors. This technique could be a cost-effective tool for in vitro skeletal muscle cell differentiation and maturation, with potential applications in tissue regeneration and drug development.STATEMENT OF SIGNIFICANCE: Alginate based biomaterials are commonly used in tissue engineering and regenerative medicine field, however, the inefficient sequestration of growth factors restricted its utilization. In this study, a novel alginate based substrates was produced covalently modified with gelatin and heparin, in order to capture more effective cytokines and proteins in the culture milieu, keep homeostasis for cell survival and tissue regeneration with growth factor sequestration and long-term release capacities. Combining with skeletal muscle derived ECM, the modified Alginate-Gelatin-Heparin gel could most effectively mimic the tissue specific microenvironment to support skeletal muscle progenitor cells proliferation, differentiation and myotube formation. Additionally, the economical and practical features will make it more promising in high-throughput application for regenerative medicine research.

engineering, biomedical,materials science, biomaterials
A 3D, Magnetically Actuated, Aligned Collagen Fiber Hydrogel Platform Recapitulates Physical Microenvironment of Myoblasts for Enhancing Myogenesis

Nianyuan Shi,Yuhui Li,Le Chang,Guoxu Zhao,Guorui Jin,Yi Lyu,Guy M. Genin,Yufei Ma,Feng Xu

DOI: https://doi.org/10.1002/smtd.202100276

IF: 12.4

2021-05-13

Small Methods

Abstract:Many cell responses that underlie the development, maturation, and function of tissues are guided by the architecture and mechanical loading of the extracellular matrix (ECM). Because mechanical stimulation must be transmitted through the ECM architecture, the synergy between these two factors is important. However, recapitulating the synergy of these physical microenvironmental cues in vitro remains challenging. To address this, a 3D magnetically actuated collagen hydrogel platform is developed that enables combined control of ECM architecture and mechanical stimulation. With this platform, it is demonstrated how these factors synergistically promote cell alignment of C2C12 myoblasts and enhance myogenesis. This promotion is driven in part by the dynamics of Yes‐associated protein and structure of cellular microtubule networks. This facile platform holds great promises for regulating cell behavior and fate, generating a broad range of engineered physiologically representative microtissues in vitro, and quantifying the mechanobiology underlying their functions.

materials science, multidisciplinary,chemistry, physical,nanoscience & nanotechnology
Matrix scaffolding for stem cell guidance toward skeletal muscle tissue engineering

Claudia Fuoco,Lucia Lisa Petrilli,Stefano Cannata,Cesare Gargioli

DOI: https://doi.org/10.1186/s13018-016-0421-y

IF: 2.6

2016-07-27

Journal of Orthopaedic Surgery and Research

Abstract:Extracellular matrix (ECM) is composed of many types of fibrous structural proteins and glycosaminoglycans. This important cell component not only provides a support for cells but is also actively involved in cell-cell interaction, proliferation, migration, and differentiation, representing, therefore, no longer only a mere static structural scaffold for cells but rather a dynamic and versatile compartment. This aspect leads to the need for investigating new bio-inspired scaffolds or biomaterials, able to mimic ECM in tissue engineering. This new field of research finds particular employment in skeletal muscle tissue regeneration, due to the inability of this complex tissue to recover volumetric muscle loss (VML), after severe injury. Usually, this is the result of traumatic incidents, tumor ablations, or pathological states that lead to the destruction of a large amount of tissue, including connective tissue and basement membrane. Therefore, skeletal muscle tissue engineering represents a valid alternative to overcome this problem.Here, we described a series of natural and synthetic biomaterials employed as ECM mimics for their ability to recreate the correct muscle stem cell niche, by promoting myogenic stem cell differentiation and so, positively affecting muscle repair.

orthopedics
Development of Self-assembled Muscle-powered Microdevices

Xi Jianzhong,Schmidt Jacob J.,Montemagno Carlo D.

DOI: https://doi.org/10.1557/proc-823-w9.8/o5.8

2004-01-01

MRS Proceedings

Abstract:As microcomponents in engineered systems, biological muscles have unique advantages such as large force transduction, utilization of biochemical fuel, and self-assembly from single cells, over other inorganic actuators for biomedical engineering applications. Successful integration of muscles with inorganic fabricated structures and electronics promises the capability of precisely characterizing muscles' mechanical properties and fabricating self-assembled controllable autonomous structures powered by ubiquitous glucose. However, the use of extracted muscle tissue from animals on these devices is impractical and inefficient, as the tissues must be dissected and incorporated into each device by hand with crude interfaces between the biological tissue and inorganic materials. Integration of muscle with fabricated structures would be optimally achieved through self-assembling muscle cells on MEMS. The construction of self-assembled muscle-powered MEMS structures is complicated by the stringent requirements to spatially direct the cell growth, control the tight connection of these differentiated structures with MEMS structures, and enable the cells and the integrated hybrid freedom to move. Conventional and soft photolithography techniques have been extensively employed to pattern the growth of a variety of cell types and investigate their interaction with substrate in the micrometer level. However, all studies are only suitable for patterning static cells on an immobile surface, so a novel system of spatially patterning the contractible cells must be developed to enable the cells and the integrated hybrid devices to be free to move.We present a novel system of self-assembling myocytes on MEMS devices. This system has shown its capability of spatially and selectively directed growth and differentiation of myocytes into single muscle bundles, attachment of these functional bundles to MEMS structures, and the controlled partial release of the resultant hybrid devices. Two groups of self-assembled muscle-MEMS devices, force-measuring cantilevers and muscle-powered microrobots have been created. Here the further detailed studies of this system are discussed, especially the concept of the self-assembly and the material interfacial problems in this system.
Engineering 3D functional tissue constructs using self-assembling cell-laden microniches

Dan Xing,Wei Liu,Jiao Jiao Li,Longwei Liu,Anqi Guo,Bin Wang,Hongsheng Yu,Yu Zhao,Yuling Chen,Zhifeng You,Cheng Lyu,Wenjing Li,Aifeng Liu,Yanan Du,Jianhao Lin

DOI: https://doi.org/10.1016/j.actbio.2020.07.058

IF: 10.633

2020-09-01

Acta Biomaterialia

Abstract:Tissue engineering using traditional size fixed scaffolds and injectable biomaterials are faced with many limitations due to the difficulties of producing macroscopic functional tissues. In this study, 3D functional tissue constructs were developed by inducing self-assembly of microniches, which were cell-laden gelatin microcryogels. During self-assembly, the accumulation of extracellular matrix (ECM) components was found to strengthen cell-cell and cell-ECM interactions, leading to the construction of a 'native' microenvironment that better preserved cell viability and functions. MSCs grown in self-assembled constructs showed increased maintenance of stemness, reduced senescence and improved paracrine activity compared with cells grown in individual microniches without self-assembly. As an example of applying the self-assembled constructs in tissue regeneration, the constructs were used to induce in vivo articular cartilage repair and successfully regenerated hyaline-like cartilage tissue in the absence of other extrinsic factors. This unique approach of developing self-assembled 3D functional constructs holds great promise for the generation of tissue engineered organoids and repair of challenging tissue defects.

engineering, biomedical,materials science, biomaterials
Engineering Stem Cell Fate Controlling Biomaterials to Develop Muscle Connective Tissue Layered Myofibers (Adv. Funct. Mater. 3/2024)

Seokgyu Han,Myung Chul Lee,Alejandra Rodríguez‐delaRosa,Jiseong Kim,Margot Barroso‐Zuppa,Montserrat Pineda‐Rosales,Seong Soo Kim,Takaaki Hatanaka,Iman K. Yazdi,Nicole Bassous,Indranil Sinha,Olivier Pourquié,Sungsu Park,Su Ryon Shin

DOI: https://doi.org/10.1002/adfm.202470014

IF: 19

2024-01-16

Advanced Functional Materials

Abstract:Tissue Engineering In article number 2304153, Sungsu Park, Su Ryon Shin, and co‐workers introduce a novel bioengineering method to develop muscle connective tissue‐layered myofibers using a human‐induced pluripotent stem cell‐derived paraxial mesoderm. The development of stem cell fate‐controlling biomaterials via control of the reciprocal activities of transforming growth factor‐beta 1 and its inhibitor enables co‐differentiation of muscle connective tissue fibroblasts and myofibers within a single microscale construct in a locally controlled manner.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Rapid prototyping of three-dimensional cell/matrix constructs

Xiaohong Wang,Yongnian Yan,Wei Xü,Haixia Liu,Zhuo Xiong,Feng Lin,RenDong Wu,Renji Zhang

DOI: https://doi.org/10.1049/cp:20061060

2006-01-01

Abstract:The current and traditional tissue engineering approaches have been strictly limited to simple functional tissues such as bone, cartilage and skin. Until now there has been no reported success in the construction of functional complex tissue/organ substitutes such as liver, kidney and pancreas. We have recently developed an organ manufacturing technique that enables us to form cell/biomaterial complex three-dimensional (3D) architectures in designed patterns. Rapid prototyping technique was used to assemble hepatocytes and gelatin/alginate matrix into 3D constructs. The embedded hepatocytes remain viable and perform biological functions as long as the 3D structures are retained. The new technology has the potential for eventual high-throughput production of artificial human tissues and organs.
Engineering Skeletal Muscle Tissue in Bioreactor Systems

An Yang,Li Dong

DOI: https://doi.org/10.3760/cma.j.issn.0366-6999.20141076

IF: 6.133

2014-01-01

Chinese Medical Journal

Abstract:Objective To give a concise review of the current state of the art in tissue engineering (TE) related to skeletal muscle and kinds of bioreactor environment.Data sources The review was based on data obtained from the published articles and guidelines.Study selection A total of 106 articles were selected from several hundred original articles or reviews. The content of selected articles is in accordance with our purpose and the authors are authorized scientists in the study of engineered muscle tissue in bioreactor.Results Skeletal muscle TE is a promising interdisciplinary field which aims at the reconstruction of skeletal muscle loss. Although numerous studies have indicated that engineering skeletal muscle tissue may be of great importance in medicine in the near future, this technique still represents a limited degree of success. Since tissue-engineered muscle constructs require an adequate connection to the vascular system for efficient transport of oxygen, carbon dioxide, nutrients and waste products. Moreover, functional and clinically applicable muscle constructs depend on adequate neuromuscular junctions with neural cells. Third, in order to engineer muscle tissue successfully, it may be beneficial to mimic the in vivo environment of muscle through association with adequate stimuli from bioreactors.Conclusion Vascular system and bioreactors are necessary for development and maintenance of engineered muscle in order to provide circulation within the construct.
Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique

Yongnian Yan,Xiaohong Wang,Yuqiong Pan,Haixia Liu,Jie Cheng,Zhuo Xiong,Feng Lin,Rendong Wu,Renji Zhang,Qingping Lu

DOI: https://doi.org/10.1016/j.biomaterials.2005.02.027

IF: 14

Biomaterials

Abstract:We have recently developed an organ manufacturing technique that enables us to form cell/biomaterial complex three-dimensional (3D) architectures in designed patterns. This technique employs a highly accurate 3D micropositioning system with a pressue-controlled syringe to deposit cell/biomaterial structures with a lateral resolution of 10 microm. The pressure-activated micro-syringe is equipped with a fine-bore exit needle using which a wide variety of 3D patterns with different arrays of channels (through-holes) were created. The channels can supply living cells with nutrients and allow removing the cell metabolites. The embedded cells remain viable and perform biological functions as long as the 3D structures are retained. The new technology has the potential for eventual high-throughput production of artificial human tissues and organs.
A Modular Approach to the Engineering of A Centimeter-Sized Bone Tissue Construct with Human Amniotic Mesenchymal Stem Cells-Laden Microcarriers

Maiqin Chen,Xiu Wang,Zhaoyang Ye,Yan Zhang,Yan Zhou,Wen-Song Tan

DOI: https://doi.org/10.1016/j.biomaterials.2011.06.054

IF: 14

2011-01-01

Biomaterials

Abstract:Tissue engineering of clinical-relevant large tissue constructs remains a big challenge due to the mass transfer limit. A modular approach via the assembling of modular tissues thus eliminating the mass transfer limit holds great promise for fabricating centimeter-sized constructs. In the present study, we investigated the feasibility of using microcarriers seeded with adult mesenchymal stem cells (MSCs) to fabricate a large bone tissue. It was demonstrated that human amniotic MSCs (hAMSCs) were efficiently seeded onto CultiSpher S microcarriers (made of porcine gelatin) in a spinner flask and quickly proliferated while retaining a great viability. Within a total culture period of 28 days, using a two-stage culture strategy, hAMSCs-laden microcarriers with a high cell density were prepared at the first stage and the cells were then directly induced to undergo osteogenic differentiation in the same culture flask. During this cultivation process, the aggregation of cell-laden microcarriers was apparent, which resulted in aggregates of 700-800 mu m, a size permissive for maintaining high cell viability. The osteogenic differentiation of hAMSCs on microcarriers was confirmed with increased mineral deposition (Alizarin red S staining and quantification of calcium content), ALP activity as well as gene expression of osteogenic markers (collagen type I and osteocalcin). These modular bone-like tissues were used as building blocks to fabricate a macroscopic bone construct in a cylindrical perfusion culture chamber (2 cm in diameter). After a 7-day perfusion culture, these modular tissues readily assembled into a centimeter-sized construct (diameter x height: 2 cm x 1 cm). Both good cell viability and fairly homogenous distribution of cellular content and bone-characteristic ECM within the macrotissue were elaborated. This paper provided a proof-of-concept study for modularly engineering clinical-relevant large tissue replacements with cell-laden microcarriers. (C) 2011 Elsevier Ltd. All rights reserved.
Advances in Skeletal Muscle Engineering in Biomedical Research

Mengqian Zhao,Haitao Liu,Xu Zhang,Jianhua Qin

DOI: https://doi.org/10.1002/admt.202300595

IF: 6.8

2023-10-08

Advanced Materials Technologies

Abstract:Skeletal muscle contributes significantly to human health, such as locomotion, energy metabolism, and immune regulation. The development of muscle tissue engineering better mimics complex muscle structure and functions. This review summarizes emerging strategies to fabricate biomimetic muscle tissue with various cell resources mimicking the architecture and physiology of muscle tissue and their applications. Skeletal muscle contributes significantly to human health, which is closely relevant to human locomotion, energy metabolism, immune regulation, and aging. Skeletal muscle holds the potential to recover its healthy condition via self‐repairing after minor damage. However, the capacity of sarcous self‐repair becomes incompetent following massive trauma or some myopathy, which raises a huge demand for skeletal muscle regeneration. Skeletal muscle engineering aims to rebuild muscle tissues in vitro to repair muscle injuries, develop pathological models, advance myopathy‐related research, and explore myopathy‐related medications. This review summarizes the advances in skeletal muscle engineering, including the cell resources that can be used in muscle regeneration, the recent progress of rebuilding methods for skeletal muscle engineering, as well as the biomedical applications of engineered skeletal muscle for tissue repair, drug testing, disease modeling, and soft robots. Finally, the challenges and future perspectives are discussed on improving skeletal muscle engineering by integrating multidisciplinary approaches, thus accelerating the technological innovation and translational application of this area.

materials science, multidisciplinary
Development of a serum-free medium for myoblasts long-term expansion and 3D culture for cell-based meat

Wenjing Dai,Yawen Chen,Wanli Xiong,Shihao Li,Wen-Song Tan,Yan Zhou

DOI: https://doi.org/10.1111/1750-3841.16884

Abstract:Cell-based meat technology provides an effective method to meet the demand for meat, while also posing a huge challenge to the expansion of myoblasts. It is difficult to develop serum-free medium suitable for long-term culture and large-scale expansion of myoblasts, which causes limited understanding of myoblasts expansion. Therefore, this study used C2C12 myoblasts as model cells and developed a serum-free medium for large-scale expansion of myoblasts in vitro using the Plackett-Burman design. The serum-free medium can support short-term proliferation and long-term passage of C2C12 myoblasts, while maintaining myogenic differentiation potential well, which is comparable to those of growth medium containing 10% fetal bovine serum. Based on the C2C12 myoblasts microcarriers serum-free culture system established in this study, the actual expansion folds of myoblasts can reach 43.55 folds after 7 days. Moreover, cell-based meat chunks were preliminarily prepared using glutamine transaminase and edible pigments. The research results provide reference for serum-free culture and large-scale expansion of myoblasts in vitro, laying the foundation for cell-based meat production. PRACTICAL APPLICATION: This study developed a serum-free medium suitable for long-term passage of myoblasts and established a microcarrier serum-free culture system for myoblasts, which is expected to solve the problem of serum-free culture and large-scale expansion of myoblasts in cell culture meat production.

Aligning Mission and Position in a Critical Policy Leadership Tool: SNRS Nursing Research White Paper Message From the President.

Engineering Human Ventricular Heart Muscles Based on a Highly Efficient System for Purification of Human Pluripotent Stem Cell-Derived Ventricular Cardiomyocytes

Nano‐ and Microfabrication for Engineering Native‐Like Muscle Tissues

Engineering Muscle Tissues on Microstructured Polyelectrolyte Multilayer Films

Engineering Stem Cell Fate Controlling Biomaterials to Develop Muscle Connective Tissue Layered Myofibers

Application of the Cell Sheet Technique in Tissue Engineering.

Optimization of Culture Media and Cell Ratios for 3D In Vitro Skeletal Muscle Tissues with Endothelial Cells

Engineered meatballs via scalable skeletal muscle cell expansion and modular micro-tissue assembly using porous gelatin micro-carriers

Tissue-Specific Extracellular Matrix Enhances Skeletal Muscle Precursor Cell Expansion And Differentiation For Potential Application In Cell Therapy

Tissue-specific extracellular matrix promotes myogenic differentiation of human muscle progenitor cells on gelatin and heparin conjugated alginate hydrogels

A 3D, Magnetically Actuated, Aligned Collagen Fiber Hydrogel Platform Recapitulates Physical Microenvironment of Myoblasts for Enhancing Myogenesis

Matrix scaffolding for stem cell guidance toward skeletal muscle tissue engineering

Development of Self-assembled Muscle-powered Microdevices

Engineering 3D functional tissue constructs using self-assembling cell-laden microniches

Engineering Stem Cell Fate Controlling Biomaterials to Develop Muscle Connective Tissue Layered Myofibers (Adv. Funct. Mater. 3/2024)

Rapid prototyping of three-dimensional cell/matrix constructs

Engineering Skeletal Muscle Tissue in Bioreactor Systems

Fabrication of viable tissue-engineered constructs with 3D cell-assembly technique

A Modular Approach to the Engineering of A Centimeter-Sized Bone Tissue Construct with Human Amniotic Mesenchymal Stem Cells-Laden Microcarriers

Advances in Skeletal Muscle Engineering in Biomedical Research

Development of a serum-free medium for myoblasts long-term expansion and 3D culture for cell-based meat