Abstract:In the mobile optoelectronic tracking system (MOTS) based on charge-coupled device (CCD) and fiber-optic gyroscope (FOG), the tracking performance (TP) and anti-disturbance ability (ADA) characterized by boresight error are of equal importance. Generally, the position tracking loop, limited by the image integration time of CCD, would be subject to a non-negligible delay and low-sampling rate, which could not minimize the boresight error. Although the FOG-based velocity loop could enhance the ADA of the system, it is still insufficient in the case of some uncertain disturbances. In this paper, a feedforward control method based on the results of error and disturbance observation was proposed. The error observer (EOB) based on the CCD data and model output essentially combined the low-frequency tracking feedforward and closed-loop disturbance observer (DOB), which could simultaneously enhance the low-frequency TP and ADA. In addition, in view of the poor low-frequency performance of the FOG due to drift and noise that may result in the inaccuracy of the observed low-frequency disturbance, the FOG-based DOB was used to improve the relatively high-frequency ADA. The proposed method could make EOB and DOB complementary and help to obtain a high-precision MOTS, for in practical engineering, we give more attention to the low-frequency TP and full-band ADA. Simulations and experiments demonstrated that the proposed method was valid and had a much better performance than the traditional velocity and position double-loop control (VPDC).

A Smith Predictor Modified with a Pseudo Feedforward Control for the Charge-Coupled Device-Based Optoelectronic Tracking System

Improved Smith Predictor Control for Fast Steering Mirror System

Multiple closed-loop control based on improved Smith predictor

Prediction and Control of Small Deviation in the Time-Delay of the Image Tracker in an Intelligent Electro-Optical Detection System

Stabilization Control of Electro-Optical Tracking System with Fiber-Optic Gyroscope Based on Modified Smith Predictor Control Scheme

Two Degree-of-Freedom Smith Predictor for Processes with Time Delay

Feedforward Control Based on Error and Disturbance Observation for the CCD and Fiber-Optic Gyroscope-Based Mobile Optoelectronic Tracking System

Error-Based Feedforward Control for a Charge-Coupled Device Tracking System

Small Tracking Error Correction for Moving Targets of Intelligent Electro-Optical Detection Systems

A Control Method for Tracking Large Position Deviation Signal Fast and Smoothly

Modified Smith Predictor Design and Its Applications to Long Time Delay Systems

Position Control of an Electro-Hydraulic Servo System Based on Improved Smith Predictor.

A New Smith Predictor Motor Control System to Reduce Disturbance Effects Caused by Unknown Terrain Slopes in Mobile Robots

Line of Sight Tracking Method Based on Feedback Linearization and Command Planning

Visual Servoing with Modified Smith Predictor for Micromanipulation Tasks

Compensating for Some Errors Related to Time Delay in a Charge-Coupled-device-based Fast Steering Mirror Control System Using a Feedforward Loop

Optimizing Controls to Track Moving Targets in an Intelligent Electro-Optical Detection System

Modified Steady Tracking Strategy for Composite Axes System in Free-Space Laser Communication

Improved TLD Approach Applied in Optoelectronic Tracking

Photoelectric Turret Control Method Based on Predictive Tracking and Sliding Mode Variable Structure Control with Extended State Observer

Adaptive Optics Tip-Tilt Correction Based on Smith Predictor and Filter-Optimized Linear Active Disturbance Rejection Control Method