Abstract:It is vital to explore sustainable and highly efficient catalysts for the oxygen reduction reaction (ORR) with increasing energy demand. Herein, a cobalt (Co) atom dispersed on an N-doped carbon nanosphere catalyst (denoted as ) was designed and constructed by a simple precursor-engineering method. The regulation of heteroatoms and Co metal atoms in precursors introduces more defects and thus reduces the degree of graphitization in the catalyst. The high N content of 5.23 at% in the catalyst provides abundant N sites to anchor metallic Co atoms, which further increases the defects for enhanced catalytic activity. The obtained with an ultralow loading of Co (only 0.041 wt %) exhibits an onset potential of 1.05 V, a limited-diffusion current density of 4.74 mA/cm<sup>2</sup>, and a half-wave potential of 0.79 V for the ORR under alkaline conditions, comparable to those of commercial Pt/C (1.06 V, 4.58 mA/cm<sup>2</sup>, and 0.81 V, respectively). Therefore, the synergistic effect of heteroatoms and Co metal atoms is beneficial for tuning the carbon matrix defects, which leads to the improvement of ORR activity. The Koutecky–Levich equation and rotating ring-disk electrode tests reveal a complete four-electron oxygen reduction pathway, impeding hydrogen peroxide generation. Moreover, nearly 93.8% of the current is retained for after 10 h stability testing without any morphological structural collapse. Meanwhile, it demonstrates superior tolerance to methanol. Our discovery opens a door to engineering the defects of carbon catalysts through introducing ultralow loading of non-noble metal atoms on substrates.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c03197?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c03197</a>.**Polarization curves of catalysts for temperature regulation; TEM and HAADF-STEM graphs; TGA curves of catalysts; XRD and Raman analysis of ECo-900; XPS C1s spectra of catalysts; additional cyclic voltammogram and LSV data; stability testing data; methanol resistance testing data; K–L plots and electron number; cycling performance of Zn-air equipped battery data; and element analysis results (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c03197/suppl_file/ae0c03197_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Deepening the Understanding of Carbon Active Sites for ORR Using Electrochemical and Spectrochemical Techniques

Pre-fixing defects in carbon framework for revealing the active sites of oxygen reduction reaction at nitrogen-doped carbon nanotubes

C-O--K+ (na+) Groups in Non-Doped Carbon As Active Sites for the Oxygen Reduction Reaction

Defect-induced Catalysis toward the Oxygen Reduction Reaction in Single-walled Carbon Nanotube: Nitrogen doped and Non-nitrogen doped

Uncovering pH-dependency and interfacial electron-transfer mechanisms of oxygen reduction reaction sites in nitrogen-doped carbon materials

Electrochemically controlled in situ conversion of CO2 to defective carbon nanotubes for enhanced H2O2 production

Vaporized-salt-induced sp3-hybridized defects on nitrogen-doped carbon surface towards oxygen reduction reaction

Boosting Oxygen Reduction Reaction Kinetics by Designing Rich Vacancy Coupling Pentagons in the Defective Carbon

Dopant–free edge–rich mesoporous carbon: Understanding the role of intrinsic carbon defects towards oxygen reduction reaction

Ammonia Thermal Treatment toward Topological Defects in Porous Carbon for Enhanced Carbon Dioxide Electroreduction

Superior Oxygen Reduction Electrocatalysis Enabled by Integrating Hierarchical Pores, Fe3C Nanoparticles and Bamboo-Like Carbon Nanotubes

Enhanced Oxygen Reduction Catalysis of Carbon Nanohybrids from Nitrogen-Rich Edges

Heating Treated Carbon Nanotubes As Highly Active Electrocatalysts for Oxygen Reduction Reaction

Defect-Engineered Mesoporous Undoped Carbon Nanoribbons Outperform the Pt/C Benchmark for Oxygen Reduction

Enhancing Defects of N-Doped Carbon Nanospheres Via Ultralow Co Atom Loading Engineering for a High-Efficiency Oxygen Reduction Reaction

Carbon nanotube supported zinc, cobalt, nitrogen, sulfur-doped porous carbon as electrocatalyst for enhanced oxygen reduction reaction

Intrinsic Carbon Defects in Nitrogen and Sulfur Doped Porous Carbon Nanotubes Accelerate Oxygen Reduction and Sulfur Reduction for Electrochemical Energy Conversion and Storage

A New Method for Developing Defect-Rich Graphene Nanoribbons/onion-Like Carbon@co Nanoparticles Hybrid Materials As an Excellent Catalyst for Oxygen Reactions

The vital balance of graphitization and defect engineering for efficient bifunctional oxygen electrocatalyst based on N‐doping carbon/CNTs frameworks

Co/N-doped Carbon Nanotube Arrays Grown on 2D MOFs-derived Matrix for Boosting the Oxygen Reduction Reaction in Alkaline and Acidic Media

Rational Control of Topological Defects in Porous Carbon for High‐Efficiency Carbon Dioxide Conversion