Abstract:Rare-earth elements (which include all lanthanides, scandium, and yttrium) play a key role in many fields including oil refining, metallurgy, electronics manufacturing, and other high-technology applications. Although the available lanthanide resources are enough for current levels of manufacturing, increased future demand for lanthanides will require new, efficient recovery methods to provide a sustainable supply. Membrane adsorbers are promising separation materials to recover lanthanides from high volumes of wastewater due to their tailorable surface chemistry, high binding capacity and high throughput. In this work, membrane adsorbers were synthesized by first using ultraviolet-initiated free radical polymerization to graft a poly(glycidyl methacrylate) (p-GMA) layer to the surface of polyethersulfone membranes. Then, the reactive epoxy groups of the grafted p-GMA were used for the covalent attachment of lysine molecules via a zinc perchlorate-catalyzed, epoxide ring-opening reaction at 35°C. Changes in membrane surface chemistry throughout the functionalization process were monitored with Fourier Transform Infrared Spectroscopy. The degree of grafting for the p-GMA film was quantified gravimetrically and increased with increasing polymerization time. Equilibrium adsorption experiments were performed for single specie solutions of La3+, Ce3+, Nd3+, Na+, Ca2+, and Mg2+ at pH 5.25 ± 0.25. Lysine-modified membranes showed negligible uptake of Na+, Ca2+, and Mg2+. The maximum capacities modeled by the Langmuir isotherm for La3+ and Ce3+ were 6.11 ± 0.58 and 6.45 ± 1.29 mg/g adsorbent, respectively. Nd3+ adsorbed to the membrane; however, the fit of the Langmuir model was not significant and it adsorbed to a lower extent than La3+ and Ce3+. Lower adsorption of the higher charge density species indicates that the primary binding mode is through the amine moieties of lysine and not the carboxylic acid. Dynamic adsorption experiments were conducted with 1 ppm La3+ feed solutions at different flow rates using either a single membrane or three membranes in series. The dynamic binding capacity at 50% breakthrough was independent of flowrate within the tested range. The low-temperature membrane functionalization methodology presented in this work can be used to immobilize biomolecules with even higher specificity, like engineered peptides or proteins, on membrane surfaces.

Europium Recovery using Selective Metal-Organic Framework Incorporated Mixed-Matrix Membrane

Enhancing the adsorptive recovery of europium from real-world solid samples through the synergistic impact of lysozyme fibril and melamine phytate

Selective recovery of europium from real acid mine drainage using modified Cr-MIL and SBA15 adsorbents

3D-agaric like core-shell architecture UiO-66-NH2@ZIF-8 with robust stability for highly efficient REEs recovery

Investigation of europium(III) uptake from highly sulphate solution via cloud point extraction by mono-Schiff base combined with Triton X-100

Efficient Extraction and Stripping of Nd(III), Eu(III) and Er(III) by Membrane Dispersion Micro-Extractors

Fabrication and TA@MOF-808 modification of new thin-film composite membranes for effective retrieval of ionic rare earths

Carbon Cloth Supported Nano-Mg(OH)2 for the Enrichment and Recovery of Rare Earth Element Eu(III) From Aqueous Solution

New Sustainable Solvent Extraction Pathways for Rare Earth Metals via Oximes Molecules

Selective recovery of yttrium oxide and yttrium–europium oxide particles from fluorescent wastes by solvent extraction, precipitation, and calcination

Efficient Enrichment and Recovery of Rare Earth Elements with Low Concentration by Membrane Dispersion Micro-Extractors

Selective Adsorption of Rare Earth Elements over Functionalized Cr-MIL-101

Effect of solution chemistry on filtration performances and fouling potential of membrane processes for rare earth element recovery from red mud

Cationic Metal-Organic Framework-Based Mixed-Matrix Membranes for Fast Sensing and Removal of Cr2O72- Within Water

Highly Efficient and Selective Recovery of Rare Earth Elements Using Mesoporous Silica Functionalized by Preorganized Chelating Ligands

Cationic Metal-Organic Framework-Based Mixed-Matrix Membranes for Fast Sensing and Removal of Cr2O7 2- Within Water

Efficient Recovery of Rare Earth Elements (Pr(III) and Tm(III)) From Mining Residues Using a New Phosphorylated Hydrogel (Algal Biomass/PEI)

A Lysine-Modified Polyethersulfone (PES) Membrane for the Recovery of Lanthanides

Minerals recovery from a rare earth extraction wastewater by a combined chemical precipitation and membrane distillation process

Functionalized metal-organic-framework CMPO@MIL-101(Cr) as a stable and selective rare earth adsorbent

Recovery of rare earth elements from electronic waste by diffusion dialysis