Abstract:With the acceleration of the urban development process and the rapid growth of China's population, the subway has become the first choice for people to travel, and the urban underground space has been continuously improved. The subway construction has become the focus of urban underground space development in the 21st century. During the construction of subway tunnels, the problem of surface settlement will inevitably be caused, and the problem of surface settlement will have a certain safety impact on the safe use of surface buildings. The impact of surface construction is predicted, so as to select the best construction technology and avoid the problem of surface subsidence to the greatest extent. On the basis of analyzing the principle of surface subsidence, this paper studies the optimal control strategy and process of subsidence in subway tunnel engineering. The research results of the article show the following. (1) The two sections of the pebble soil layer have basically the same subsidence trend. Among them, the first section has a larger settlement amplitude and both sides are steeper. The second section is mainly cobble clay soil. The pebble layer has good mechanical properties. If it can be well filled, its stability will be improved. The comparative analysis of the two sections shows that with the increase of the soil cover thickness, the maximum subsidence at the surface gradually decreases. The reason is that when the stratum loss is the same, the greater the soil cover thickness, the greater the settlement width. Sections 2 and 3 of a single silty clay have relatively close settlement laws, and the settlement changes on both sides of the tunnel are similar. (2) The surface subsidence caused by the excavation of the side hole accounts for more than 50% of the total surface subsidence, and the width of the settlement tank after the excavation of the side hole is increased by 8-10 meters compared with the excavation of the middle hole. (3) The prediction error of the BP neural network model proposed in this paper is the lowest among the four models, whether it is the prediction of the cumulative maximum surface subsidence or the location of the cumulative maximum surface subsidence, and the average relative error of the cumulative maximum surface subsidence is 3.27%, the root mean square error is 3.87, the average relative error of the location of the cumulative maximum surface subsidence is 7.96%, and the root mean square error is 21.06. In the prediction process of the cumulative maximum surface subsidence, the prediction error value of the Elman neural network is relatively large, and the GRNN generalized neural network and RBF neural network have no significant changes; in the process of predicting the position where the cumulative maximum surface subsidence occurs, the prediction error value of RBF neural network is maximum.

The forecasting of surface displacement for tunnel slopes utilizing the WD-IPSO-GRU model

Multi-objective Optimization-Based Prediction of Excavation-Induced Tunnel Displacement

Dynami C Mul Ti-Obj Ecti V E Opti Mi Zati on Inv Er Se Pr Edi Cti on of Excavation-Induced Tunnel Displacement

Surface Deformation Prediction Model of High and Steep Open-Pit Slope Based on APSO and TWSVM

Displacement prediction of tunnel entrance slope based on LSSVM and bacterial foraging optimization algorithm

A Data‐driven Intelligent Model for Landslide Displacement Prediction

Wavelet Prediction Method for Ground Deformation Induced by Tunneling

Research on Prediction of Surface Deformation in Mining Areas Based on TPE-Optimized Integrated Models and Multi-Temporal InSAR

Explainable Deep Learning-Based Dynamic Prediction of Surface Settlement Considering Temporal Characteristics During Deep Excavation

Prediction of Tunnel Deformation Using PSO Variant Integrated with XGBoost and Its TBM Jamming Application

Prediction of 3D deformation due to large gradient mining subsidence based on InSAR and constraints of IDPIM model

Enhancing the performance of tunnel water inflow prediction using Random Forest optimized by Grey Wolf Optimizer

Novel Hybrid Method to Predict the Ground-Displacement Field Caused by Shallow Tunnel Excavation

Inversion of Surrounding Red-Bed Soft Rock Mechanical Parameters Based on the PSO-XGBoost Algorithm for Tunnelling Operation

Time-series prediction of settlement deformation in shallow buried tunnels based on EMD-SSA-GRNN model

Tunnel Displacement Prediction under Spatial Effect Based on Gaussian Process Regression Optimized by Differential Evolution

Soft Computing Approach for Prediction of Surface Settlement Induced by Earth Pressure Balance Shield Tunneling

Analysis and Prediction of Subway Tunnel Surface Subsidence Based on Internet of Things Monitoring and BP Neural Network

Newmark sliding displacements of slopes

A Hybrid Data-Driven Model for Geotechnical Reliability Analysis

Research on prediction of surrounding rock deformation and optimization of construction parameters of high ground stress tunnel based on WOA-LSTM