The effects of supplemental food on reproduction in parental male smallmouth bass

M. Ridgway,B. Shuter

DOI: https://doi.org/10.1007/BF00004938

1994-02-01

Environmental Biology of Fishes

Abstract:

What problem does this paper attempt to address?

Interfacial Engineering Regulating Electronic Structure of Homologous S-scheme Co3O4@C-TiO2 Heterojunction for Enhanced Fenton-like Reaction Activity

Fei Wang,Ya Gao,Yutong Chai,Chong-Chen Wang,Jian-Feng Wang,Xiao-Hong Yi,Yang Li,Huifen Fu,Chen Zhao,Peng Wang

DOI: https://doi.org/10.1016/j.apcatb.2024.124848

2024-01-01

Abstract:MOF-on-MOF (ZIF-67@MIL-125) derived S-scheme Co3O4@C-TiO2 (Co@Ti) homologous heterojunction is fabricated with a precisely regulated d-band center by constructing tight interface to enhance the Fenton-like activity. The regulation of d-band center of Co@Ti enhances the peroxymonosulfate (PMS) adsorption and the electron transfer rate, boosting the chloroquine phosphate (CQ) degradation rate constant by more than 20 times. Moreover, the self-made reactor adopting Co@Ti/graphite felt (GF) as immoblized catalyst accomplished long-term and continuous 100.0% CQ degradation efficiency in the simulated pulluted aqueous solution formulated from tap water up to 168.0h. For the first time, the newly-developed feature-based molecular networking (FBMN) technique is applied to analyze the intermediate products of CQ, which improved the efficiency and accuracy in analyzing intermediate products of various micropollutants. This work provides valuable guidance to regulate electronic structure of the catalyst by constructing MOF-on-MOF derived homologous heterojunctions with tight interface for enhanced Fenton-like ability toward water purification.
In Situ Construction of S-scheme Heterojunctions Between BiOCl and Bi-MOF for Enhanced Photocatalytic CO2 Reduction and Pollutant Degradation

Haolan Shi,Mengjiao Xu,Changyu Leng,Lili Ai,Luxiang Wang,Hong Fan,Shumin Wu

DOI: https://doi.org/10.1016/j.jcis.2024.11.077

IF: 9.9

2024-01-01

Journal of Colloid and Interface Science

Abstract:Recently, photocatalytic technology has been widely used as a sustainable method to address environmental pollution issues. Herein, BiOCl/Bi-MOF (BOC/Bi-MOF) based semiconductor photocatalysts with S-scheme heterojunction were fabricated by an in situ growth method, and the photocatalytic activity of the materials was explored for CO2 reduction and pollutant degradation. As confirmed by density functional theory calculations and physiochemical characterizations, the established S-scheme heterojunction confers enhanced carrier separation efficiency and retention of redox capability to the BOC/Bi-MOF. Through an improved combination of charge separation and surface reactions, the prepared BOC/Bi-MOF efficiently reduces CO2 solely to CO. The heterojunction as catalyst is more durable and effective than any of its single component. The CO evolution rate of the optimized composite catalyst was 7.66 and 33.10 times of those of BiOCl and Bi-MOF, respectively. In addition, BOC/Bi-MOF exhibits a high efficiency in the photocatalytic degradation of the pollutant rhodamine B (RhB) in aqueous environments, and the pollutant was completely removed within 20 min. Due to the generation of interfacial potential differences, the internal electric field (IEF) generation at heterogeneous interfaces facilitates the separation and transfer of photogenic charges. This work demonstrated a practical and effective route for in situ growth of S-scheme heterojunctions with high efficiencies in CO2 reduction and RhB degradation.
Synergistic Defects and Structural Reconstruction in S-scheme Bi2MoO6-x-TiO2 Heterojunction for Enhancing Piezo-Photocatalytic Degradation of Gatifloxacin

Ruixin Chen,Wei Gan,Jun Guo,Sheng Ding,Run Liu,Ziwei Zhao,Kui Yan,Zihan Zhou,Miao Zhang,Zhaoqi Sun

DOI: https://doi.org/10.1016/j.cej.2024.157867

IF: 15.1

2024-01-01

Chemical Engineering Journal

Abstract:Construction of heterojunction piezo-photocatalysts is a promising approach to improve catalytic performance for solving environmental pollution issues. However, the mechanism of the synergistic effect of defects and piezoelectric fields on the interface polarization, charge transfer, and active sites in heterojunctions still needs to be further explored. Here, oxygen vacancy-rich Bi2MoO6 (VBMO) and TiO2 (TO) were combined into an S-scheme heterojunction (VBMO-xTO) by hydrothermal method for piezo-photocatalytic degradation of gatifloxacin (GAT). Experimental and theoretical results confirm that oxygen vacancies induce the formation of Mo (VBMO)-O (TO) bonds at the interface, which in turn aggravates the internal reconstruction of the heterojunction. Simultaneously, the formed interface bonds strengthen the interface bonding force, improve its piezoelectric polarization, and acts as an interface electron bridge to promote charge transfer. In addition, under the action of ultrasound, the piezoelectric field generated by the compressive stress regulates the electron distribution of the heterojunction and enhances its adsorption performance. Benefiting from the synergistic reinforcement mechanism, VBMO-15TO exhibits excellent piezo-photocatalytic degradation of GAT, and the degradation rate is 92.5 % in only 6 min. This study provides a reference for understanding the effect of defects on the piezoelectric properties of heterojunctions.
Boosting Photoelectrochemical Activities of Heterostructured Photoanodes Through Interfacial Modulation of Oxygen Vacancies

Xiaoqiang An,Le Zhang,Bo Wen,Zhenao Gu,Li-Min Liu,Jiuhui Qu,Huijuan Liu

DOI: https://doi.org/10.1016/j.nanoen.2017.04.002

IF: 17.6

2017-01-01

Nano Energy

Abstract:Oxygen deficiency control has become an on-looming strategy for improving the catalytic ability of semiconductors, while the impact of defect distribution on the separation of charge carriers is still an open question. Herein, TiO2/Bi2WO6 heterostructures are used as a typical model to demonstrate the hypothesis of boosting photoactivity of photoanodes through modulating the spatial distribution of oxygen vacancies. Compared to pristine TiO2, significantly improved photoelectrochemical performance is achieved through suppressing intrinsic defects in Bi2WO6 and tuning the formation sites of interfacial oxygen vacancies. Both experimental and theoretical investigations demonstrate that the distribution of interfacial oxygen vacancies around interface of Bi2WO6 and in the TiO2 side is beneficial for the efficient extraction of photogenerated electrons toward counter electrodes. This research shed atomic-level insight into the interfacial modulation of defect distribution. Therefore, it provides a new principle to develop efficient heterostructures for photoelectrochemical and photocatalytic applications.
Improving built-in electric fields for effective photocatalytic activity in rationally designed electron transfer pathway of TiO2@MoS2/Bi2S3

Jianyu Gong,Yihang Zhang,Ting Yue,Yao Lu

DOI: https://doi.org/10.1039/d3ta08108g

IF: 11.9

2024-03-23

Journal of Materials Chemistry A

Abstract:The efficiency of photocatalytic activity relies on rationally controlling the rapid charge transfer channel and the interfacial electric field. In this article, a ternary TiO2@MoS2/Bi2S3 is proposed, in which TiO2 hierarchical microspheres are assembled with MoS2 nanosheets and Bi2S3 NPs. This assembly generates a substantial surface electrostatic potential difference at the interface, thereby strengthening the built-in electric field. The internal electric field intensity of TiO2@MoS2/Bi2S3 is 5.6 and 1.8 times greater than that detected in TiO2 and TiO2@MoS2, respectively. This considerable increase significantly speeds up the migration of out-of-plane electrons at the TiO2/MoS2 and MoS2/Bi2S3 interfaces. Driven by this enhanced field, TiO2@MoS2/Bi2S3 exhibits dramatically improved photocatalytic activity under visible light irradiation, achieving 8.3 times and 2.7 times higher than that of pristine TiO2 and TiO2@MoS2 on the degradation rate of tetrachlorophenol (4-CP) respectively, along with 6% of incident photon-to-electron conversion efficiency (IPCE). In addition, mechanism investigation demonstrated Schottky barrier is established due to the Fermi level convergence and the bending of energy band, effectively inhibiting the electron backflow. Furthermore, DFT calculations and mechanism investigation revealed that the photo-induced electrons transfer route in the direction of MoS2 efficiently suppressed the electron-hole recombination process, ultimately facilitating the generation of reactive oxygen species (ROS). This work provides the comprehensive understanding of the mechanism in depth for enhancing built-in electric field via formation of dual heterostructure, constituting a promising strategy to design photocatalysts for realizing high-efficiency photocatalytic activity. Keywords: Built-in electric fields, charge transfer, TiO2@MoS2/Bi2S3, heterostructure, photocatalytic activity

materials science, multidisciplinary,chemistry, physical,energy & fuels
Facile synthesis of ZnCd-MOF/Ag3PO4 heterojunction for highly efficient photocatalytic oxygen evolution

Pengke Deng,Yangyang Xu,Jing Xu,Hua Tang,Qinqin Liu

DOI: https://doi.org/10.1007/s11164-022-04749-y

IF: 3.134

2022-06-23

Research on Chemical Intermediates

Abstract:Constructing suitable heterojunction with interface engineering has been an effective way to boost charge separation of semiconductors, thus providing improved photocatalytic ability. In this work, a novel bimetallic framework (ZnCd-MOF) was prepared to construct heterojunction with Ag 3 PO 4 . The ZnCd-MOF nanosheets were dispersed around Ag 3 PO 4 particles with a close interface; as a result, the interface photo-charge separation was enhanced, and more photogenerated holes can be concentrated on the Ag 3 PO 4 for realizing a higher photocatalytic activity. The obtained ZnCd-MOF/Ag 3 PO 4 composites exhibited higher photocatalytic oxygen production activity than that of pure Ag 3 PO 4 . Furthermore, when the content of ZnCd-MOF in the composite increased from 1 to 10 wt%, the oxygen production increased from 1399 to 2458 μmol g −1 under simulated sunlight irradiation. This work provides a new way to design high-efficiency Ag 3 PO 4 -based heterojunction photocatalyst via taking full advantage of the interface engineering in the composite together with providing abundant active sites for photocatalytic oxygen production.

chemistry, multidisciplinary
An Efficient Strategy for Tailoring Interfacial Charge Transfer Pathway on Semiconductor Photocatalysts: A Case of (BiFeO3)x(SrTiO3)1−x/Mn3O4

Qiang Wang,Li Li,Rongrong Liu,Ping Wang,Yapeng Wang,Jun Liang

DOI: https://doi.org/10.1002/adfm.202408420

IF: 19

2024-09-20

Advanced Functional Materials

Abstract:The authors propose a strategy to realize the effective charge transfer pathway in semiconductor heterostructures through work function manipulation, and introduce BiFeO3 into SrTiO3 to effectively adjust the work function of (BiFeO3)x(SrTiO3)1−x solid solution. The transformation of the original type II heterojunction SrTiO3/Mn3O4 into S‐scheme heterojunction (BiFeO3)0.3(SrTiO3)0.7/Mn3O4 is realized. The ability to generate heterostructures with a desirable charge transfer pathway is essential for achieving semiconductor photocatalysts with super photocatalytic activity. Herein, it is proposed to realize robust tailoring of effective charge transfer pathway in semiconductor‐based heterostructures via work function regulation, and elucidate the influence of the work function of the semiconductor on the charge transfer mechanism at the heterostructure interface. Specifically, taking type‐II heterostructure SrTiO3/Mn3O4 as an example, introducing BiFeO3 into SrTiO3 effectively regulate the work function of the (BiFeO3)x(SrTiO3)1−x/Mn3O4 (BxT1−x/Mn3O4) solid solution through optimizing the x value. Combined with in situ testing, the results show that the original type‐II heterojunction SrTiO3/Mn3O4 is converted into S‐scheme heterojunction (BiFeO3)0.3(SrTiO3)0.7/Mn3O4 when BiFeO3 is introduced. This increases the work function of the semiconductor, inducing the light‐generated carriers to be guided and separated by the generated built‐in electric field. Therefore, the implementation of this strategy can achieve efficient photocatalytic CO2 reduction. In contrast to pristine SrTiO3/Mn3O4, the (BiFeO3)0.3(SrTiO3)0.7/Mn3O4 heterostructure exhibits a 28‐fold enhancement of in electron consumption rate during photocatalytic CO2 reduction, and the reaction mechanism is suggested. In this study, a strategy for effectively converting interfacial charge transfer pathways in semiconductor photocatalysts is developed to enhance the photoconversion kinetics of CO2 and H2O.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
In-situ constructing S-scheme/Schottky junction and oxygen vacancy on SrTiO3 to steer charge transfer for boosted photocatalytic H2 evolution

Chuan-Qi Li,Sha-Sha Yi,Yan Liu,Zhu-Lin Niu,Xin-Zheng Yue,Zhong-Yi Liu

DOI: https://doi.org/10.1016/j.cej.2021.129231

IF: 15.1

2021-08-01

Chemical Engineering Journal

Abstract:The interfacial design and defect engineering are of huge interest for achieving efficient photocatalytic H2 evolution using solar energy. In this work, we successfully integrated the Schottky junction and S-scheme heterojunction with oxygen vacancies to achieve the defective Ru/SrTiO3/TiO2 hybrid photocatalyst. As verified by experimental studies, these junctions with defects fully exploit the benefits of interfacial charge separation and transport. It is demonstrated that the designed hybrid exhibits dramatically enhanced photocatalytic H2 evolution rate with respect to pristine SrTiO3, high apparent quantum efficiency at 365 nm irradiation as well as excellent stability. Furthermore, the Ru/SrTiO3/TiO2 based device photocatalyst also displays the excellent H2 evolution activity with easy recycle nature. This finding provides a newfangled thought for developing highly efficient hybrid materials for photocatalytic H2 evolution.

engineering, chemical, environmental
Synergistic regulation of d-band center photocatalytic hydrogen evolution at S-scheme heterojunction reduction sites through defect engineering and interface electric field

Xinyu Miao,Jie He,Haiyang Zhai,Zhiliang Jin

DOI: https://doi.org/10.1016/j.jcis.2024.08.028

2024-08-06

Abstract:The efficiency of photocatalytic hydrogen evolution can be significantly enhanced while maintaining cost-effectiveness through the synergistic effect of defect surface engineering and multi-component heterojunctions. The structure and properties of NiCo2O4 nanorods were modified by inducing oxygen vacancies at different temperatures in this study, resulting in improved optical properties and electron adsorption capacity. The presence of oxygen vacancies leads to a reduction in the band gap of NiCo2O4, thereby enhancing electron transport efficiency through band gap engineering. Simultaneously, surface properties undergo changes, and vacancy defects serve as electron trapping centers, facilitating an increased participation of electrons in the hydrogen evolution reaction process. The dodecahedron KMP with a cavity structure is additionally introduced to form an S-scheme heterojunction with NiCo2O4. This establishes a novel mechanism for electron transport, which effectively enhances the separation of electron-hole pairs and improves the redox capacity of the photocatalytic system. The adsorption of intermediates in the hydrogen production process is enhanced through synergistic regulation of d-band centers via surface defect engineering and S-scheme heterojunction. Additionally, this approach improves the separation efficiency of electron-hole pairs and accelerates electron transfer dynamics, significantly enhancing hydrogen production efficiency.
Boosting the Photocatalytic Activity of Β-Feooh Catalyst for Toluene Oxidation by Constructing Internal Electric Field at 0D/1D Homojunction Interfaces.

Zhichun Si,Mengxi Pei,Yishui Liu,Bo Li,Feiyu Kang

DOI: https://doi.org/10.1016/j.jcis.2023.10.049

IF: 9.9

2024-01-01

Journal of Colloid and Interface Science

Abstract:Photocatalytic degradation is considered as the most energy-efficient, environmentally benign, and effective method for treating low fraction organic contaminants. However, the photocatalysts still suffer from low utilization efficiency of visible-light and severe carrier recombination. Heterojunctions can resolve these two main problems in some extent but still be restrained by the low quality of hetero-interface. In this study, homojunction was constructed of β-FeOOH quantum dots and nanorods with the same lattice by a two-step precipitation method, to avoid the heterointerface with too many defects and possess good charge separation as a consequence. The catalysts were characterized by activity test, electron spin resonance, Mott-Schottky plots, photocurrent density tests and open-circuit potential measurements, etc. The results revealed that a strong internal electric fields (IEFs) was created at the interface of catalyst. Beneficently, the electron rearrangement leads to a more rational distribution of oxygen vacancies in the catalyst, resulting in more efficient dissociation of oxygen molecules and formation of active radicals, thus facilitating the efficient degradation of toluene. This study proposes a novel strategy to boosting the photocatalytic activity of low dimensional semiconductors via forming homojunction interfaces to improve their charge transfer.
Surface defect engineering of Fe-doped Bi7O9I3 microflowers for ameliorating charge-carrier separation and molecular oxygen activation

Tao Jia,Jiang Wu,Zhonghao Ji,Cheng Peng,Qizhen Liu,Min Shi,Jun Zhu,Huaning Wang,Dongjing Liu,Min Zhou

DOI: https://doi.org/10.1016/j.apcatb.2020.119727

2021-05-01

Abstract:Effective charge-carrier separation and molecular oxygen activation are crucial factors for photocatalytic environmental purification. Herein, an efficient Fe-doped Bi7O9I3 microflowers photocatalyst was synthesized. It was discovered that Fe doping could not only tune the concentration of oxygen vacancies of Bi7O9I3 to optimize the dissociation of excitons, but also promote the separation of charge-carriers and the activation of oxygen molecules. Meanwhile, the inducing of surface oxygen vacancies and Fe3+/Fe2+ by Fe optimal doping can act as the activation center for catalytic reactions, which also significantly enhances the photocatalytic activity. Benefiting from the optimized properties, the photocatalytic activity of Fe-doped Bi7O9I3 photocatalyst has been significantly improved by more than 4 times. Finally, we proposed that a highly efficient catalytic oxidation reaction mechanism can be achieved via modulating Fe doping to induce oxygen vacancies to promote charge separation and molecular oxygen activation. This work provides a novel approach for designing efficient photocatalysts.

chemistry, physical,engineering, chemical, environmental
Synergistic introduction of oxygen vacancy and silver/silver iodide: Realizing deep structure regulation on bismuth oxybromide for robust carbon dioxide reduction and pollutant oxidation

Xuemei Jia,Haili Lin,Jing Cao,Cheng Hu,Haoyu Sun,Shifu Chen,Xuemei Jia,Haili Lin,Jing Cao,Cheng Hu,Haoyu Sun,Shifu Chen

DOI: https://doi.org/10.1016/j.jcis.2022.05.101

IF: 9.9

2022-10-15

Journal of Colloid and Interface Science

Abstract:To efficiently solve severe energy shortage and environmental pollution issues, step-scheme (S-scheme) photocatalytic system, as perfect photocatalyst with strong redox ability and swift separation efficiency of carriers, has been considered a feasible tactic. Herein, a novel S-scheme silver/silver iodide/bismuth oxybromide heterojunction with rich oxygen vacancies (OVs) (labeled as Ag/AgI/BiO1−xBr) was in situ fabricated via a simple photodeposition-precipitation method. It was discovered that the obtained Ag/AgI/BiO1−xBr heterojunction with the optimized molar ratio of silver/bismuth (Ag/Bi) at 0.4 presented excellent photocatalytic properties for carbon dioxide (CO2) reduction (2.46 μmol g−1h−1 carbon monoxide (CO) and 1.25 μmol g−1h−1 methane (CH4) generation) and antibiotic tetracycline (TC) removal (96.7%) even in actual waste water or in the presence of electrolytes. The enhanced performance of S-scheme Ag/AgI/BiO1−xBr composite may be ascribed to the collaborative effect of OVs and silver/silver iodide (Ag/AgI), in which OVs acted as the charge transmission bridge for reducing the interface migration resistance of the charge and Ag/AgI served as a cocatalyst for enhancing the separation efficiency of carriers. Furthermore, a feasible photocatalytic mechanism was discussed via density functional theory calculation and in-situ X-ray photoelectron spectroscopy. This work not only demonstrated the synergistic application of OVs transmission bridge and Ag/AgI cocatalyst, but also provided a facile way to design high-efficiency and stable photocatalysts for energy production and environmental remediation.

chemistry, physical
Multi-electric field modulation for photocatalytic oxygen evolution: Enhanced charge separation by coupling oxygen vacancies with faceted heterostructures

Tingcha Wei,Ya-Nan Zhu,Zhenao Gu,Xiaoqiang An,Li-min Liu,Yuxuan Wu,Huijuan Liu,Junwang Tang,Jiuhui Qu

DOI: https://doi.org/10.1016/j.nanoen.2018.07.018

IF: 17.6

2018-09-01

Nano Energy

Abstract:A fundamental challenge of photocatalysis is developing efficient strategies to suppress the recombination of photogenerated charge carriers. Herein, ZnO/BiVO4 hierarchical nanostructures were exemplified to demonstrate new concept of multi-electric field-assisted charge separation. The contribution of both facet engineering and defect modulation to the facilitated photocatalysis was confirmed by both experimental observations and theoretical calculations. Such integration of built-in fields in faceted BiVO4 and anisotropic ZnO nanorods, together with the possible Z-scheme at the interfaces resulted into 1.36 mmol h−1 g−1 O2 produced under visible light irradiation, and more than one order of magnitude enhanced apparent quantum yield at 450 nm. This work not only provides fundamental insights into the facet-dependent distribution of interfacial defects, but also offers a strategy for the design of faceted heterojunctions with controlled vacancies for significantly enhanced charge separation.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Insight into the Synergistic Effect of Defect and Strong Interface Coupling on ZnIn2S4/CoIn2S4 Heterostructure for Boosting Photocatalytic H2 Evolution

Xuehua Wang,Tianyu Shi,Xianghu Wang,Aili Song,Guicun Li,Lei Wang,Jianfeng Huang,Alan Meng,Zhenjiang Li

DOI: https://doi.org/10.1016/j.jechem.2023.12.040

IF: 13.1

2024-01-01

Journal of Energy Chemistry

Abstract:Steering the directional carrier migration across the interface is a central mission for efficient photocatalytic reactions. In this work, an atomic-shared heterointerface is constructed between the defect-rich ZnIn2S4 (HVs-ZIS) and CoIn2S4 (CIS) via a defect-guided heteroepitaxial growth strategy. The strong interface coupling induces adequate carriers exchanging passageway between HVs-ZIS and CIS, enhancing the internal electric field (IEF) in the ZnIn2S4/CoIn2S4 (HVs-ZIS/CIS) heterostructure. The defect structure in HVs-ZIS induces an additional defect level, improving the separation efficiency of photocarriers. Moreover, promoted by the IEF and intimate heterointerface, photogenerated electrons trapped by the defect level can migrate to the valence band of CIS, contributing to massive photogenerated electrons with intense reducibility in HVs-ZIS/CIS. Consequently, the HVs-ZIS/CIS heterostructure performs a boosted H2 evolution activity of 33.65 mmol g-1 h-1. This work highlights the synergistic effects of defect and strong interface coupling in regulating carrier transfer and paves a brave avenue for constructing efficient heterostructure photocatalysts. (c) 2024 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by ELSEVIER B.V. and Science Press. All rights reserved.
Synergistic defect and doping engineering building strong bonded S-scheme heterojunction for photocatalysis

Jia-Jing Zhang,Jun Di,Yun-Peng Zhao,He-Shan Zheng,Pin Song,Jing-Zhi Tian,Wei Jiang,Yong-Jie Zheng

DOI: https://doi.org/10.1016/j.chemosphere.2023.140347

IF: 8.8

2023-10-06

Chemosphere

Abstract:Photocatalytic degradation of pollutants is considered a promising approach for wastewater treatment, but is hampered by low efficiency and limited understanding of degradation pathways. A novel oxygen-doped porous g-C 3 N 4 /oxygen vacancies-rich BiOCl (OCN/OVBOC) heterostructure was prepared for photocatalytic degradation of bisphenol A (BPA). The synergistic defect and doping engineering favor the formation of strong bonded interface for S-scheme mechanism. Among them, 0.3 OCN/OVBOC showed the most excellent degradation rate, which was 8 times and 4 times higher than that of pure g-C 3 N 4 and BiOCl, respectively. This excellent performance is mainly attributed to the significantly enhanced charge separation via strong bonded interface and redox capability of the S-scheme heterojunction structure, by tuning the coordination excitation and electron localization of the catalyst via O doping and vacancies. This work provides important insights into the role of synergistic defect and doping engineering in facilitating the formation of strong bonded S-scheme heterojunction and ultimately sheds new light on the design of efficient photocatalysts.

environmental sciences
Heterojunction interface field and piezoelectric polarization field cooperatively facilitating photocarrier separation in heterojunction piezo-photocatalysts: Experimental and theoretical characterization

Xiaofeng Sun,Tao Xian,Ruishan Li,Hua Yang

DOI: https://doi.org/10.1016/j.colsurfa.2023.132430

IF: 5.518

2023-09-21

Colloids and Surfaces A Physicochemical and Engineering Aspects

Abstract:To understand the piezo-photocatalysis mechanism, herein we have designed novel β-Bi 2 O 3 /BiFeO 3 heterojunctions by decorating β-Bi 2 O 3 particles on the surface of BiFeO 3 microdiscs, and experimentally and theoretically elucidated their enhanced piezo-photocatalytic activity and mechanism for tetracycline hydrochloride (TC) elimination. The photodegradation experiment, performed under simulated-sunlight irradiation, shows that the optimal composite 9.1 %BO/BFO has a photodegradation activity increased by 5.2 times over that of BiFeO 3 and 1.9 times over that of β-Bi 2 O 3 , which can be interpreted by the heterojunction-interface-field-induced Z-scheme photocarrier transfer mechanism. The piezo-photodegradation activity of the 9.1 %BO/BFO composite was evaluated under irradiation of both simulated sunlight and ultrasonic, manifesting a further increase. The piezo-photocatalytic synergistic factor is obtained as SF = 1.62, evidencing an obvious synergistic enhancement between photocatalysis and piezocatalysis. This phenomenon can be explained due to the fact that the heterojunction interface field and piezoelectric polarization field cooperatively facilitate the separation of photocarriers (particularly those in the bulk) and make them participate in the redox degradation of TC more efficiently. To understand the piezo-photocatalysis mechanism of the β-Bi 2 O 3 /BiFeO 3 heterojunctions as well as the TC decomposition mechanism, theoretical studies were conducted by density functional theory (DFT) and finite-element method (FEM).

chemistry, physical
Novel AgI/BiSbO4 heterojunction for efficient photocatalytic degradation of organic pollutants under visible light: Interfacial electron transfer pathway, DFT calculation and degradation mechanism study

Zhuangzhuang Wang,Lisha Jiang,Kai Wang,Yuan Li,Gaoke Zhang

DOI: https://doi.org/10.1016/j.jhazmat.2020.124948

IF: 13.6

2021-05-01

Journal of Hazardous Materials

Abstract:Herein, we constructed a novel AgI/BiSbO4 heterojunction via a hydrothermal-precipitation method. The heterojunction structure boosts the generation of hydroxyl and superoxide radicals for efficient degradation of organic pollutants. The photocatalytic activities of the optimal sample for ARG and TC degradation are 10 and 1.6 times higher than those of bare AgI, respectively. Characterizations and theoretical calculations together confirm a strong interfacial charge transfer exists between the interlayer in AgI and BiSbO4 by the formation of Ag-O bond, making O atoms obtain rich free electrons from Ag atoms of AgI, thus forming an ultrahigh electron transfer tunnel, and ultimately accelerating the separation of photoinduced electrons. More interestingly, low amounts of Ag0 NPs formed during the photocatalytic process, enhancing the visible light absorption because of its SPR (surface plasmon resonance) effect and further promoting the separation of photoinduced carriers. Furthermore, photocatalytic degradation pathways were proposed in detail by analyzing intermediates and a reasonable photocatalytic mechanism was unearthed. This work extends the development of AgI-based heterojunction photocatalysts.

environmental sciences,engineering, environmental
Unraveling the synergy of interface engineering -MnO2/Bi2WO6 heterostructures and defective active sites for superdurable photocatalysis: Mechanistic insights into charge separation/transfer

Muhammad Arif,Ayaz Mahsud,Amjad Ali,Shipeng Liao,Jiawei Xia,Hai Xiao,Mohammad Azam,Tahir Muhmood,Zhansheng Lu,Yinjuan Chen

DOI: https://doi.org/10.1016/j.cej.2023.146458

IF: 15.1

2023-01-01

Chemical Engineering Journal

Abstract:The construction of visible-light-driven hybrid heterostructure photocatalysts is of great significance for environmental remediation, although the utilization of strong visible-light response photocatalysts with high efficiency and stability remains a major challenge. Defect engineering is an excellent way to introduce metal cation vacancies in materials, thereby ensuing in highly enhanced catalytic performance. Inspired by this, we effectively constructed a built-in interface alpha-MnO2/Bi2WO6 heterostructure with abundant intimate interfaces and defective Mn3+/Mn4+ active sites for photocatalytic tetracycline hydrochloride (TC-HCl), hexavalent chromium Cr6+ reduction, and Escherichia coli (E. coli) inactivation. The experimental results, such as the active species test and X-ray photoelectron spectroscopy, indicated that the defective sites Mn3+/Mn4+, surface oxygen vacancies, and Bi(3+x)+ boosted the visible light absorption, and highly enhanced the photoinduced charge separation/transfer. Furthermore, experimental and DFT calculations reveal the high charge density at the built-in interface heterostructure and the Z-scheme charge transfer mechanism during the photocatalytic process. The results further reveal that O-2(-) and O-1(2) are the main reactive active species contributing to the photocatalytic reaction. The exceptional TC-HCl decomposition activity of the alpha-MnO2/Bi2WO6 heterostructure (97.56%, 2.31, and 2.04 times higher than bulk), enhanced reaction kinetics (K-app = 0.041 min(-1), 6.4, and 5.2 times higher than bulk), removal rate of 80.3%, Cr6+ reduction to Cr3+ (98.56%, K-app = 0.0599 min(-1)), and almost 100% bacterial inactivation compared to bulk alpha-MnO2 (42.22%) and Bi2WO6 (47.76%), were mainly due to the enhanced charge separation/transfer at the built-in interface and high charge density. This study opens new horizons for constructing Z-scheme MnO-based interface heterostructures with abundant defect sites for exceptional photocatalytic applications.
Light-controlled convergence of photogenerated carriers and reactants to boost photocatalytic performance

Rui Zhang,Xingjun Sun,Lingcheng Zheng,Hui Liu,Xinghua Zhang,Zunming Lu,Weihua Wang,Feng Lu,Hong Dong,Hui Liu,Rongkun Zheng,Yahui Cheng

DOI: https://doi.org/10.1016/j.jcat.2021.05.018

IF: 7.3

2021-08-01

Journal of Catalysis

Abstract:Photocarriers and reactants are two crucial factors in photocatalytic reactions, the divergence between them severely limits the photocatalytic performance. Herein, we proposed a light-controlled method to converge photocarriers and reactants to the same location. Based on energy band engineering, we adjust the wavelength of the irradiated light to selectively grow cocatalyst in the desired position in a semiconductor. The pinpointed growth of the cocatalyst serves as a bridge between the photocarriers and the reactants, and thus improves the photocatalytic efficiency. We applied this strategy to the Ag/Cu2O photocatalyst, and the Ag was selectively grown on the edge, {111} facet and {100} facet of Cu2O, respectively. Benefiting from the synergy of the photocarriers and the reactants, the edge-preferred growth of Ag/Cu2O showed 30-fold increased degradation rate for MO and 6-fold increased photocurrent density for water splitting at 0 V vs. RHE compared with the bare Cu2O. This strategy has also been successfully applied to Pt/BiVO4, Ag/BiVO4 and MnOx/BiVO4 systems. This method opens up a new way for the rational design of high-performance photocatalysts.

chemistry, physical,engineering, chemical
Synergistic introducing of oxygen vacancies and hybrid of organic semiconductor: Realizing deep structure modulation on Bi5O7I for high-efficiency photocatalytic pollutant oxidation

Xiaoming Gao,Kailong Gao,Feng Fu,Chunhua Liang,Qiangen Li,Jiaqing Liu,Loujun Gao,Yongfa Zhu

DOI: https://doi.org/10.1016/j.apcatb.2019.118562

2020-01-01

Abstract:Under inducing of acetic acid, Perylene imide (PDI) were successfully self-assembled through strong pi-pi stacking with the form of face-to-face. The structure of bismuth-rich Bi5O7I was maintained. A mechanism was proposed to illustrate the self-assembly of PDI supramolecules on the surface of Bi5O7I inducing by acetic acid, which was confirmed by the calculation of thermodynamics. Furthermore, there were multiple oxygen vacancies in the Bi5O7I samples during the alcohothermal process. The introduction of oxygen vacancies enhanced the performance of visible light-harvesting and changed the band structure of Bi5O7I. Under visible light irradiation, the photocatalytic activities of Bi5O7I-OVs/PDI for the degradation of organic pollutant were significantly improved. The improved activity was attributed to the high ability of holes oxidation of bismuth-rich metastable Bi5O7I and the introduction of oxygen vacancies. This study provided a method for PDI self-assembled on the surface of bismuth-rich BixOyXz and an effective strategy for improving photocatalytic activity.

The effects of supplemental food on reproduction in parental male smallmouth bass

Interfacial Engineering Regulating Electronic Structure of Homologous S-scheme Co3O4@C-TiO2 Heterojunction for Enhanced Fenton-like Reaction Activity

In Situ Construction of S-scheme Heterojunctions Between BiOCl and Bi-MOF for Enhanced Photocatalytic CO2 Reduction and Pollutant Degradation

Synergistic Defects and Structural Reconstruction in S-scheme Bi2MoO6-x-TiO2 Heterojunction for Enhancing Piezo-Photocatalytic Degradation of Gatifloxacin

Boosting Photoelectrochemical Activities of Heterostructured Photoanodes Through Interfacial Modulation of Oxygen Vacancies

Improving built-in electric fields for effective photocatalytic activity in rationally designed electron transfer pathway of TiO2@MoS2/Bi2S3

Facile synthesis of ZnCd-MOF/Ag3PO4 heterojunction for highly efficient photocatalytic oxygen evolution

An Efficient Strategy for Tailoring Interfacial Charge Transfer Pathway on Semiconductor Photocatalysts: A Case of (BiFeO3)x(SrTiO3)1−x/Mn3O4

In-situ constructing S-scheme/Schottky junction and oxygen vacancy on SrTiO3 to steer charge transfer for boosted photocatalytic H2 evolution

Synergistic regulation of d-band center photocatalytic hydrogen evolution at S-scheme heterojunction reduction sites through defect engineering and interface electric field

Boosting the Photocatalytic Activity of Β-Feooh Catalyst for Toluene Oxidation by Constructing Internal Electric Field at 0D/1D Homojunction Interfaces.

Surface defect engineering of Fe-doped Bi7O9I3 microflowers for ameliorating charge-carrier separation and molecular oxygen activation

Synergistic introduction of oxygen vacancy and silver/silver iodide: Realizing deep structure regulation on bismuth oxybromide for robust carbon dioxide reduction and pollutant oxidation

Multi-electric field modulation for photocatalytic oxygen evolution: Enhanced charge separation by coupling oxygen vacancies with faceted heterostructures

Insight into the Synergistic Effect of Defect and Strong Interface Coupling on ZnIn2S4/CoIn2S4 Heterostructure for Boosting Photocatalytic H2 Evolution

Synergistic defect and doping engineering building strong bonded S-scheme heterojunction for photocatalysis

Heterojunction interface field and piezoelectric polarization field cooperatively facilitating photocarrier separation in heterojunction piezo-photocatalysts: Experimental and theoretical characterization

Novel AgI/BiSbO4 heterojunction for efficient photocatalytic degradation of organic pollutants under visible light: Interfacial electron transfer pathway, DFT calculation and degradation mechanism study

Unraveling the synergy of interface engineering -MnO<sub>2</sub>/Bi<sub>2</sub>WO<sub>6</sub> heterostructures and defective active sites for superdurable photocatalysis: Mechanistic insights into charge separation/transfer

Light-controlled convergence of photogenerated carriers and reactants to boost photocatalytic performance

Synergistic introducing of oxygen vacancies and hybrid of organic semiconductor: Realizing deep structure modulation on Bi<sub>5</sub>O<sub>7</sub>I for high-efficiency photocatalytic pollutant oxidation