[Rapid diagnosis of acute viral respiratory tract infections. Examination of hospitalized children].

A. Hornsleth,B. Friis,F. Knudsen,P. Krasilnikoff

1988-05-23

Abstract:

What problem does this paper attempt to address?

Chemometric and Machine Learning Analysis of Lithium Concentration and Solvation Behavior in Li-Ion Battery Electrolytes

Lydia Meyer,Collin Kinder,Jason Morgan Porter

DOI: https://doi.org/10.1149/ma2022-026618mtgabs

2022-11-24

ECS Meeting Abstracts

Abstract:The demand for batteries is rapidly growing across a range of technologies. The increasingly diverse use cases for batteries require various capabilities, particularly requirements for high energy densities, that are currently unmet by traditional Li-ion batteries. Electrolyte stability proves to be a bottleneck for battery advancement towards energy dense chemistries beyond Li-ion, including metal anodes. In situ spectroscopy tools, such as Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and X-ray spectroscopy, have provided insight into critical molecular-level interactions in batteries during cycling. These in situ tools have yielded continuous improvement of electrolyte properties. Spectroscopy datasets, however, contain many nuances that challenge meaningful human understanding. Artificial intelligence and chemometric tools can be coupled with in situ spectroscopy to find relevant interpretations of spectral datasets and elucidate complex molecular phenomena. In this research, an analysis was performed on FTIR spectroscopy data from an electrolyte composed of LiPF6 in ethylene carbonate (EC) and ethyl methyl carbonate (EMC) to discern solvation behavior using principal component analysis (PCA) and a convolutional neural network (CNN). PCA pinpointed exact band locations of solvation shifting behavior in the IR spectra and improved understanding of the relationship between lithium concentrations and peak changes. The CNN was trained with spectral datasets of electrolytes with known lithium concentrations and then could predict lithium concentrations from spectral datasets with extraordinarily high accuracy. Additionally, the CNN interpreted FTIR spectral datasets from a graphite half-cell with EC/EMC/LiPF6 electrolyte and accurately determined the lithium concentration in the bulk electrolyte. The CNN also observed lithium depletion events (up to 10% lithium depletion) in the graphite anode during fast-charging cycles of the galvanostatic intermittent titration technique. This research breaks new ground on using advanced computational tools for in situ spectroscopic analysis of battery electrolytes and demonstrates an improved understanding of complex molecular-level phenomena in electrolytes.
Self‐Driving Platform for Metal Nanoparticle Synthesis: Combining Microfluidics and Machine Learning

Huachen Tao,Tianyi Wu,Sina Kheiri,Matteo Aldeghi,Alán Aspuru‐Guzik,Eugenia Kumacheva

DOI: https://doi.org/10.1002/adfm.202106725

IF: 19

2021-09-15

Advanced Functional Materials

Abstract:Many applications of inorganic nanoparticles (NPs), including photocatalysis, photovoltaics, chemical and biochemical sensing, and theranostics, are governed by NP optical properties. Exploration and identification of reaction conditions for the synthesis of NPs with targeted spectroscopic characteristics is a time-, labor-, and resource-intensive task, as it involves the optimization of multiple interdependent reaction conditions. Integration of machine learning (ML) and microfluidics (MF) offers accelerated identification and optimization of reaction conditions for NP synthesis. Here, an autonomous ML-driven, oscillatory MF platform for the synthesis of NPs is reported. The platform utilized multiple recipes and reaction times for the synthesis of NPs with different dimensions, conducted spectroscopic NP characterization, and employed ML approaches to analyze multiple yet prioritized spectroscopic NP characteristics, and identified reaction conditions for the synthesis of NPs with targeted optical properties. The platform is also used to develop an understanding of the relationship between reaction conditions and NP properties. This study shows the strong potential of ML-driven oscillatory MF platforms in materials science and paves the way for automated NP development.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Net electrophilicity as computational route for the choice of favorable ionic liquids in nanoparticle production

Marta Bon,Debora Keller,Rolf Erni,Daniele Passerone

2023-06-27

Abstract:In the last years, the potential of using ionic liquids (IL)s as an environment for nanoparticle (NP) synthesis has been demonstrated and in particular, triggering NP formation in ILs by electron irradiation has been reported as a very simple and clean route for NP production. Starting from the recent evidence for a correlation between an IL's capability to support NP production and the radiochemical instability of the IL's cation, we used conceptual Density Functional Theory (DFT) to provide a pre-screening of a set of different IL cations. The screened quantity is the net electrophilicity which we suggest as possible measure of this instability. Therefore, our work not only gives a measure for the likelihood of NP generation in different ILs, but it also provides a model which can further be extended and applied to obtain information about any other IL of interest. Moreover, our theoretical approach outlines a strategy which may reduce a lengthy experimental investigation for the identification of the most suitable IL for a particular reaction.

Chemical Physics
Photo-Induced Microfluidic Production of Ultrasmall Platinum Nanoparticles

Marcello Marelli,Patricia Perez Schmidt,Xuan Trung Nguyen,Emanuela Pitzalis,Lorenzo Poggini,Laura Ragona,Katiuscia Pagano,Laura Antonella Aronica,Laura Polito,Claudio Evangelisti

DOI: https://doi.org/10.1039/d4nr02971b

IF: 6.7

2024-10-01

Nanoscale

Abstract:We describe here the synthesis of ultrasmall Pt nanoparticles (NPs) obtained by a robust and reliable protocol using UV-Vis photoreduction of a platinum salt precursor, under continuous flow conditions. These ligand-free Pt NPs were rapidly dispersed onto a solid support or stabilized towards aggregation as a colloidal solution by the addition of proper ligand in the reactant mixture. The proposed protocol exploits a microfluidic platform where the Pt+4 precursor is photo-reduced to Pt0 small NPs (1.3 nm) at room temperature in the presence of ethanol, without any additional reducing agent. We apply the protocol to prepare Pt NPs highly dispersed on carbon support (Pt/C) proven to be a very efficient heterogeneous catalyst for both the hydrosilylation of terminal alkynes andhydrogenation of nitroaromatic compounds , selected as model reactions. Furthermore, we exploit the versatility of this microfluidic approach to produce stabilized aqueous/ethanol colloidal solutions of Pt NPs , employing a ligand of choice (e.g., PVP or a thiol-ligand). These colloids offer long-term storage and further ligand modification.. We showcase the synthesis of biocompatible glycol-stabilized Pt nanoparticles as an exemplary application.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Windowless Observation of Evaporation-Induced Coarsening of Au-Pt Nanoparticles in Polymer Nanoreactors

Jingshan S. Du,Peng-Cheng Chen,Brian Meckes,Edward J. Kluender,Zhuang Xie,Vinayak P. Dravid,Chad A. Mirkin

DOI: https://doi.org/10.48550/arXiv.1806.00497

IF: 2.552

2018-06-01

Chemical Physics

Abstract:The interactions between nanoparticles and solvents play a critical role in the formation of complex, metastable nanostructures. However, direct observation of such interactions with high spatial and temporal resolution is challenging with conventional liquid-cell transmission electron microscopy (TEM) experiments. Here, a windowless system consisting of polymer nanoreactors deposited via scanning probe block copolymer lithography (SPBCL) on an amorphous carbon film is used to investigate the coarsening of ultrafine (1-3 nm) Au-Pt bimetallic nanoparticles as a function of solvent evaporation. In such reactors, homogeneous Au-Pt nanoparticles are synthesized from metal ion precursors in situ under electron irradiation. The non-uniform evaporation of the thin polymer film not only concentrates the nanoparticles, but also accelerates the coalescence kinetics at the receding polymer edges. Qualitative analysis of the particle forces influencing coalescence suggests that capillary dragging by the polymer edges plays a significant role in accelerating this process. Taken together, this work: 1) provides fundamental insight into the role of solvents in the chemistry and coarsening behavior of nanoparticles during the synthesis of polyelemental nanostructures, 2) provides insight into how particles form via the SPBCL process, and 3) shows how SPBCL-generated domes, instead of liquid cells, can be used to study nanoparticle formation. More generally, it shows why conventional models of particle coarsening, which do not take into account solvent evaporation, cannot be used to describe what is occurring in thin film, liquid-based syntheses of nanostructures.
Using STEM to Probe the In-Situ Dynamics of Multimetallic Nanoparticles Grown in Polymer Nanoreactors

Jingshan S. Du,Peng-Cheng Chen,Vinayak P. Dravid,Chad A. Mirkin

DOI: https://doi.org/10.1017/s1431927617005025

IF: 4.0991

2017-01-01

Microscopy and Microanalysis

Abstract:Although there has been much progress, the dynamics of nanoparticle (NP) growth in liquids and the nature of liquid-particle interactions during the growth process are poorly understood. This is especially true when studying the evolution of multimetallic NPs in liquid environments or polymer matrices [1]. The growth trajectory of NPs and several inter-particle dynamic phenomena, such as Ostwald ripening, migration-coalescence, and oriented attachment, have been observed using liquid-cell in-situ (scanning) transmission electron microscopy [(S)TEM] techniques [2,3]. Evaporation or decomposition of a dispersant thin film on a surface can drive NPs either to self-assemble into 2D monolayers and complicated nanopatterns, or to coarsen and form islands and thin solid films. This evaporation-driven material deposition is often spatially nonuniform at the nanometer scale [4]. The formation process and kinetics of such nonuniformity at the nanoscale have been difficult to directly monitor, since imaging such interactions by in-situ electron microscopy often suffers from the low contrast and fast evaporation of most liquids. Polymer nanoreactors made by Dip-Pen Nanolithography (DPN) have been proven to be a powerful emerging approach to control the formation of multimetallic NPs by thermally driven growth and coarsening [5]. Due to the high decomposition temperature, polymer nanoreactors have also provided a relatively stable fluidic environment to study NP dynamics using STEM [6] (Figure 1A). Herein, we report a study focused on the growth of Au-Pt NPs and their coarsening kinetics driven by polymer decomposition. The process is followed by in-situ STEM on thin sections of polymer nanoreactors, which are patterned on electron-transparent amorphous carbon films.
Nanoparticle Formulation Composition Analysis by Liquid Chromatography on Reversed-Phase Monolithic Silica

Ekaterina Tsarenko,Ulrich S Schubert,Ivo Nischang

DOI: https://doi.org/10.1021/acs.analchem.2c04277

2023-01-17

Abstract:Multifunctional nanoparticle (NP) formulations for medical purposes have already found their way toward envisaged translation. A persistent challenge of those systems is, next to NP size analysis, the compositional analysis of the NPs with the polymer as the matrix component and the encapsulated drug, particularly in a quantitative manner. Herein, we report the formulation of poly(lactic-co-glycolic acid) (PLGA) NPs by nanoprecipitation and the analysis of their integrity and size by dynamic light scattering (DLS) and scanning electron microscopy (SEM). Those NPs feature a variety of encapsulated drugs including the well-known ibuprofen (Ibu) as well as dexamethasone (Dex) and dexamethasone acetate (DexAce), with the latter being of potential interest for clinical treatment of SARS-CoV-2 patients. All those dissolved formulation compositions have been subjected to liquid chromatography on reversed-phase silica monolithic columns, allowing to quantitatively assess amounts of small molecule drug and NP constituting PLGA polymer in a single run. The chromatographically resolved hydrophobicity differences of the drugs correlated with their formulation loading and were clearly separated from the PLGA matrix polymer with high resolution. Our study identifies the viability of reversed-phase monolithic silica in the chromatography of both small drug molecules and particularly pharmapolymers in a repeatable and simultaneous fashion, and can provide a valuable strategy for analysis of diverse precursor polymer systems and drug components in multifunctional drug formulations.
Troubleshooting the Influence of Trace Chemical Impurities on Nanoparticle Growth Kinetics via Electrochemical Measurements

Gabriel C Halford,Sean P McDarby,Sebastian Hertle,Anne F Kiely,Jessica T Luu,Claire J Wang,Michelle L. Personick

DOI: https://doi.org/10.1039/d4nr00070f

IF: 6.7

2024-04-26

Nanoscale

Abstract:Reproducibility issues resulting from particle growth solutions made with cetyltrimethylammonium bromide (CTAB) surfactant from different lots and product lines in a newly developed synthesis of monometallic palladium (Pd) tetrahexahedra (THH) nanoparticles are investigated via a multi-pronged approach. Time-resolved electrochemical measurements of solution potential, variation of chemical parameters in colloidal synthesis, and correlation to electrodeposition syntheses are used together to uncover the effects of the unknown contaminants on the chemical reducing environment during nanoparticle growth. Iodide—a known impurity in commercial CTAB—is identified as one of the required dopants for equalizing the reducing environment across multiple CTAB sources. However, an additional dopant—acetone—is critical to establishing the growth kinetics necessary to enable the reproducible synthesis of THH in each of the CTAB formulations. In one CTAB variety, the powdered surfactant contains too much acetone, and drying of the as-received surfactant and re-addition of solvent is necessary for successful Pd THH synthesis. The relevance of solvent impurities to the reducing environment in aqueous nanoparticle synthesis is confirmed via electrochemical measurement approaches and solvent doping experiments. This work highlights the utility of real-time electrochemical potential measurements as a tool for benchmarking of nanoparticle syntheses and troubleshooting of reproducibility issues. The results additionally emphasize the importance of considering organic solvent impurities in powdered commercial reagents as a possible shape-determining factor during shaped nanomaterials synthesis.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Gas–Liquid Slug Flow Studies in Microreactors: Effect of Nanoparticle Addition on Flow Pattern and Pressure Drop

Jie Zong,Jun Yue

DOI: https://doi.org/10.3389/fceng.2021.788241

2022-01-17

Frontiers in Chemical Engineering

Abstract:Colloidal suspensions of nanoparticles (e.g., metals and oxides) have been considered as a promising working fluid in microreactors for achieving significant process intensification. Existing examples include their uses in microflow as catalysts for enhancing the reaction efficiency, or as additives to mix with the base fluid (i.e., to form the so-called nanofluids) for heat/mass transfer intensification. Thus, hydrodynamic characterization of such suspension flow in microreactors is of high importance for a rational design and operation of the system. In this work, experiments have been conducted to investigate the flow pattern and pressure drop characteristics under slug flow between N 2 gas and colloidal suspensions in the presence of TiO 2 or Al 2 O 3 nanoparticles through polytetrafluoroethylene (PTFE) capillary microreactors. The base fluid consisted of water or its mixture with ethylene glycol. The slug flow pattern with nanoparticle addition was characterized by the presence of a lubricating liquid film around N 2 bubbles, in contrast to the absence of liquid film in the case of N 2 -water slug flow. This shows that the addition of nanoparticles has changed the wall wetting property to be more hydrophilic. Furthermore, the measured pressure drop under N 2 -nanoparticle suspension slug flow is well described by the model of Kreutzer et al. (AIChE J 51(9):2428–2440, 2005) at the mixture Reynolds numbers ca. above 100 and is better predicted by the model of Warnier et al. (Microfluidics and Nanofluidics 8(1):33–45, 2010) at lower Reynolds numbers given a better consideration of the effect of film thickness and bubble velocity under such conditions in the latter model. Therefore, the employed nanoparticle suspension can be considered as a stable and pseudo single phase with proper fluid properties (e.g., viscosity and density) when it comes to the pressure drop estimation.
Real-Time Monitoring of a Sol-Gel Reaction for Polysilane Production Using Inline NIR Spectroscopy

Thomas Kisling,Robert Zimmerleiter,Lukas Roiser,Kristina Duswald,Markus Brandstetter,Christian Paulik,Klaus Bretterbauer

DOI: https://doi.org/10.1021/acs.langmuir.3c00601

IF: 3.9

2023-06-13

Langmuir

Abstract:The sol-gel process is an effective method for the preparation of homogeneous structured nanomaterials whose physico-chemical properties strongly depend on the experimental conditions applied. The control of a three-component reaction with silanes showing multiple reaction sites revealed the need for an analytical tool that allows a rapid response to ongoing transformations in the reaction mixture. Herein, we describe the implementation of near-infrared (NIR) spectroscopy based on compact, mechanically robust, and cost-efficient micro-optomechanical system technology in the sol-gel process of three silanes with a total of nine reaction sites. The NIR-spectroscopically controlled reaction yields a long-time stable product with reproducible quality, fulfilling the demanding requirements for further use in coating processes. 1H nuclear magnetic resonance measurements are used as reference values for the calibration of a partial least squares (PLS) regression model. The precise prediction of the desired parameters from collected NIR spectroscopy data acquired during the sol-gel reaction proves the applicability of the calibrated PLS regression model. The determined shelf-life and further processing tests verify the high quality of the sol-gel and the produced highly cross-linked polysilane.
Characterising a protic ionic liquid library with applied machine learning algorithms

Stuart J. Brown,Dilek Yalcin,Shveta Pandiancherri,Tu C. Le,Ibrahim Orhan,Kyle Hearn,Qi Han,Calum J. Drummond,Tamar L. Greaves

DOI: https://doi.org/10.1016/j.molliq.2022.120453

IF: 6

2022-12-01

Journal of Molecular Liquids

Abstract:The ability to synthesise large libraries of ionic liquids (ILs) is one of their greatest selling points. This allows for systematic alteration of ion structure to tailor them for applications, and to study structure–property trends of IL physicochemical, thermal and solvation properties. The influence of Coulombic, Van der Waal’s and H-bond cohesive forces as well as Pauli repulsive forces on these properties can be understood via the development of large libraries of ILs. However, due to the complexity of ILs, the ion stoichiometry, water content, ion reactivity (pKa) and ion clustering have all been reported as contributing parameters. Here we report on the physicochemical, thermal and liquid nanostructure properties of 52 stoichiometric ion combinations from a series of 10 cations and 11 anions. Of these, 9 have not been reported before, 3 have been reported with no characterisation and 17 have undergone partial characterisation. Here we discuss the importance of reproducible synthesis methods and show structure–property relationships consistent across ion series, including changing alkyl chain length on the cation or anion, multiple chains on the cation and the presence of hydroxyl groups on the cation or anion. Relatively new data analysis methods applied in the IL field of machine learning algorithms, including multiple linear regression, random forest and k-nearest neighbour algorithms were applied to the data, providing a quantitative summation of individual structural moiety contributions. We highlight the importance of the full characterisation of ILs as well as detailed reporting of their preparation for experimentation including water content and pH at 10 wt%.

chemistry, physical,physics, atomic, molecular & chemical
Tailoring the Surface Enrichment of a Pt Catalyst in Ionic Liquid Solutions by Choice of the Solvent

Daniel Hemmeter,Afra Gezmis,Daniel Kremitzl,Peter Wasserscheid,Florian Maier,Hans‐Peter Steinrück

DOI: https://doi.org/10.1002/admi.202301085

IF: 5.4

2024-04-23

Advanced Materials Interfaces

Abstract:The so‐called buoy‐effect, that is, the targeted surface enrichment of a Pt catalyst dissolved in ionic liquids (ILs), is achieved by attaching perfluorinated alkyl chains to the ligand system, which drags the metal complex toward the interface. Using angle‐resolved X‐ray photoelectron spectroscopy, the study demonstrates how this surface enrichment can be tailored by variation of the solvent IL. The so‐called buoy‐effect, that is, the targeted surface enrichment of a Pt catalyst dissolved in ionic liquids (ILs), is achieved by attaching perfluorinated alkyl chains to the ligand system, which drags the metal complex toward the interface. Using angle‐resolved X‐ray photoelectron spectroscopy, it is demonstrated how this surface enrichment can be tailored by variation of the solvent IL. In [CnC1Im][PF6] ILs (n = 2, 4, 8), the surface is fully saturated with the complex at 10%mol bulk content, while in [C4C1Im][Tf2N] only at 20%mol saturation is observed. At low catalyst concentrations of 1%mol, where saturation is not yet reached, the enrichment increases with decreasing length of the IL alkyl chain. As a general rule, the degree of surface enrichment decreases with the decrease in surface tension of the solvent IL, that is, in the order [C2C1Im][PF6] > [C4C1Im][PF6] > [C8C1Im][PF6] > [C4C1Im][Tf2N]. In ILs with very low surface tension, enrichment is even suppressed. These results reveal the surface tension of the solvent IL as rational parameter for tailoring the interfacial structure of IL‐based catalyst systems, such as supported ionic liquid phase (SILP) catalysis, where the nature of the IL/gas interface is expected to strongly influence the performance of the process.

materials science, multidisciplinary,chemistry
Advances in Liquid-Phase Synthesis: Monitoring of Kinetics for Platinum Nanoparticles Formation, and Pt/C Electrocatalysts with Monodispersive Nanoparticles for Oxygen Reduction

Vladimir Guterman,Kirill Paperzh,Irina Novomlinskaya,Ilya Kantsypa,Alina Khudoley,Yana Astravukh,Ilya Pankov,Alexey Nikulin

DOI: https://doi.org/10.3390/catal14100728

IF: 3.9

2024-10-18

Catalysts

Abstract:The growing demand for hydrogen–air fuel cells with a proton-exchange membrane has increased interest in the development of scalable technologies for the synthesis of Pt/C catalysts that will allow us to fine-tune the microstructure of such materials. We have developed a new in situ technique for controlling the kinetics of the transformation of a platinum precursor into its nanoparticles and deposited Pt/C catalysts, which might be applicable during the liquid-phase synthesis in concentrated solutions and carbon suspensions. The technique is based on the analysis of changes in the redox potential and the reaction medium coloring during the synthesis. The application of the developed technique under conditions of scaled production has made it possible to obtain Pt/C catalysts with 20% and 40% platinum loading, containing ultra-small metal nanoparticles with a narrow size distribution. The electrochemically active surface area of platinum and the mass activity of synthesized catalysts in the oxygen electroreduction reaction have proved to be significantly higher than those of commonly used commercial analogs. At the same time, despite the small size of nanoparticles, the catalysts' degradation rate turned out to be the same as that of commercial analogs.

chemistry, physical
Nanoparticle synthesis assisted by machine learning

Huachen Tao,Tianyi Wu,Matteo Aldeghi,Tony C. Wu,Alán Aspuru-Guzik,Eugenia Kumacheva

DOI: https://doi.org/10.1038/s41578-021-00337-5

IF: 83.5

2021-07-13

Nature Reviews Materials

Abstract:Many properties of nanoparticles are governed by their shape, size, polydispersity and surface chemistry. To apply nanoparticles in chemical sensing, medical diagnostics, catalysis, thermoelectrics, photovoltaics or pharmaceutics, they have to be synthesized with precisely controlled characteristics. This is a time-consuming, laborious and resource-intensive task, because nanoparticle syntheses often include multiple reagents and are conducted under interdependent experimental conditions. Machine learning (ML) offers a promising tool for the accelerated development of efficient protocols for nanoparticle synthesis and, potentially, for the synthesis of new types of nanoparticles. In this Review, we discuss ML algorithms that can be used for nanoparticle synthesis and highlight key approaches for the collection of large datasets. We examine ML-guided synthesis of semiconductor, metal, carbon-based and polymeric nanoparticles, and conclude with a discussion of current limitations, advantages and perspectives in the development of ML-assisted nanoparticle synthesis.

materials science, multidisciplinary,nanoscience & nanotechnology
Designing Structurally Ordered Pt/Sn Nanoparticles in Ionic Liquids and their Enhanced Catalytic Performance

Christine Dietrich,Martin Hähsler,Wu Wang,Christian Kübel,Silke Behrens

DOI: https://doi.org/10.1002/cnma.202000433

IF: 3.82

2020-11-16

ChemNanoMat

Abstract:Multimetallic nanoparticles (NPs) often exhibit enhanced catalytic properties that differ from their parent materials. Carefully exploring the structures of multimetallic NPs is a prerequisite for understanding the structure‐ and composition‐associated properties. Herein, intermetallic Pt/Sn NPs with tunable compositions are designed exploiting the beneficial properties of ionic liquids (ILs) in a one‐pot synthetic procedure. Metal salt precursors are reduced with triethylhydridoborate, whereby the cation of the triethylhydridoborate is adapted to the cation of the IL. Both the initial metal precursor ratio and the type of IL influence the structure of the NPs, with the effect of the IL being more pronounced. PtSn nanocrystals are obtained as phase pure products under optimized reaction conditions, whereby a microwave‐assisted approach leads to higher crystallinity. In the hydrogenation of a,b‐unsaturated aldehydes, the catalytic performance obviously depend on the NP composition. In bimetallic Pt/Sn NPs, higher Pt content leads to increased conversion, while increase in Sn increases selectivity to the cinnamic alcohol.

materials science, multidisciplinary,nanoscience & nanotechnology,chemistry
Continuous flow synthesis of N,O-dimethyl-N'-nitroisourea monitored by inline FTIR: comparing machine learning and kinetic modeling for optimization

An Su,Jiapeng Guo,Guihua Luo,Kejie Chai,Weike Su

DOI: https://doi.org/10.26434/chemrxiv-2024-dzrcd

2024-03-15

Abstract:The synthesis of N,O-Dimethyl-N'-nitroisourea, crucial intermediates in pesticide manufacturing, was explored through a substitution reaction between O-methyl-N-nitroisourea and methylamine within a novel continuous flow microreactor system, featuring FTIR inline analysis for real-time monitoring. This study embarked on a comparative analysis between two optimization approaches: the contemporary machine learning-based Bayesian optimization and the traditional kinetic modeling. Remarkably, both strategies obtained a similar yield of approximately 83 % under equivalent reaction parameters---specifically, an initial reactant concentration of 0.2 mol/L, a reaction temperature of 40 °C, a molar ratio of reactants at 5:1, and a residence time of 240 minutes. The Bayesian optimization method demonstrated a notable efficiency, achieving optimal conditions within a mere 20 experiments, in contrast to the kinetic modeling approach, which required a more laborious effort for model formulation and validation. Despite the long-standing reliance on kinetic modeling for its detailed insights into reaction dynamics, our findings suggest its relative inefficiency in optimization tasks compared to the machine learning-based alternative. This study not only highlights the potential of integrating advanced machine learning methods into chemical process optimization but also sets the stage for further exploration into efficient, data-driven approaches in chemical synthesis.

Chemistry
An outbreak of infectious hepatitis in Siliguri, 1966.

S. Pattanayak,P. Singha,S. Pal,C. Rao,J. Shrivastav

1968-11-01

The Indian Journal of Medical Research

Abstract:
Microfluidic synthesis of PLGA nanoparticles enabled by an ultrasonic microreactor

Aniket Udepurkar,Laura Mampaey,Christian Clasen,Victor Sebastian,Simon Kuhn

DOI: https://doi.org/10.1039/d4re00107a

IF: 5.2002

2024-05-23

Reaction Chemistry & Engineering

Abstract:We present an ultrasonic microreactor for synthesising poly(lactic-co-glycolic) acid (PLGA) nanoparticles through the emulsion-solvent evaporation technique. Monodispersed PLGA nanoparticles (polydispersity index (PDI) < 0.3) in the size range of 20-300 nm are desired for biomedical applications. An ultrasonic microreactor with rough microchannels is utilised for the synthesis of PLGA nanoparticles. Through a comprehensive parametric investigation, we identify the optimal ultrasonic power, PLGA concentration, and aqueous-to-organic phase flow rate ratio, to minimise the size of the PLGA nanoparticles. By varying the operational parameters and the concentration of PLGA, the mean hydrodynamic diameter of the monodispersed PLGA nanoparticles (PDI of 0.1-0.2) can be varied within the range of 115-150 nm. Furthermore, the successful encapsulation of a hydrophobic dye, Nile Red, is demonstrated, where a dye loading (DL) of up to 0.34% is achieved, which is in agreement with the previously reported loading of Nile Red. The in-vitro release study performed for the Nile Red-loaded PLGA nanoparticles (NR-PLGA) reveals a triphasic release profile of Nile Red. In summary, this work highlights the potential of the ultrasonic microreactor as a versatile platform for the synthesis of PLGA nanoparticles suitable for biomedical applications.

chemistry, multidisciplinary,engineering, chemical
Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

Brian Freeland,Ronan McCann,Paul O’Neill,Sithara Sreenilayam,Manuel Tiefenthaler,Michal Dabros,Mandy Juillerat,Greg Foley,Dermot Brabazon

DOI: https://doi.org/10.1007/s00170-021-06772-6

IF: 3.563

2021-03-12

The International Journal of Advanced Manufacturing Technology

Abstract:Nanotechnology is a significant research tool for biological and medical research with major advancements achieved from nanoparticle (Np) applications in biosensing and biotherapeutics. For laser ablation synthesis in solution (LASiS) to be chosen by researchers for Np colloid production, the process must effectively compete with chemical synthesis in terms of produced colloid quality and productivity while taking advantage of LASiS benefits in terms of its ‘green-synthesis’ and single-step functionalisation abilities. In this work, a newly developed integrated LASiS Np manufacturing system is presented including a Np flow reactor design, an at-line Np size monitoring via 180° dynamic light scattering, and a UV-Vis spectroscopy system used to estimate colloid concentration and stability. The experimental outcomes are discussed in terms of Np productivity and quality via these at-line measurements from the UV-Vis and DLS systems. The developed instrument was validated via off-line SiNps DLS, UV-Vis and morphology tests via TEM. Ultra-high quality and nanoparticle fabrication rate efficiency was achieved and is reported here.
The Value of Relationship and Communication Management in Fundraising: Comparing Donors' and Practitioners' Views of Stewardship

Richard D. Waters

Abstract:The organisation-public relationship paradigm has frequently referenced Kelly’s (2001) stewardship strategies as possible methods for strengthening relationships with stakeholders; however, there have been no attempts to measure stewardship. A mailed survey of individual donors (n = 1,706) and fundraising team members (n = 124) at three non-profit hospitals asked participants to evaluate their views toward the four stewardship strategies as well as estimate how the other side would evaluate them. By using the coorientation methodology, this study found that although both sides valued the four stewardship strategies, their attitudes differed in magnitude. These findings provide growing support for future examination of stewardship in other public relations settings, and specifically they add to the growing literature on the importance of donor cultivation.

[Rapid diagnosis of acute viral respiratory tract infections. Examination of hospitalized children].

Chemometric and Machine Learning Analysis of Lithium Concentration and Solvation Behavior in Li-Ion Battery Electrolytes

Self‐Driving Platform for Metal Nanoparticle Synthesis: Combining Microfluidics and Machine Learning

Net electrophilicity as computational route for the choice of favorable ionic liquids in nanoparticle production

Photo-Induced Microfluidic Production of Ultrasmall Platinum Nanoparticles

Windowless Observation of Evaporation-Induced Coarsening of Au-Pt Nanoparticles in Polymer Nanoreactors

Using STEM to Probe the In-Situ Dynamics of Multimetallic Nanoparticles Grown in Polymer Nanoreactors

Nanoparticle Formulation Composition Analysis by Liquid Chromatography on Reversed-Phase Monolithic Silica

Troubleshooting the Influence of Trace Chemical Impurities on Nanoparticle Growth Kinetics via Electrochemical Measurements

Gas–Liquid Slug Flow Studies in Microreactors: Effect of Nanoparticle Addition on Flow Pattern and Pressure Drop

Real-Time Monitoring of a Sol-Gel Reaction for Polysilane Production Using Inline NIR Spectroscopy

Characterising a protic ionic liquid library with applied machine learning algorithms

Tailoring the Surface Enrichment of a Pt Catalyst in Ionic Liquid Solutions by Choice of the Solvent

Advances in Liquid-Phase Synthesis: Monitoring of Kinetics for Platinum Nanoparticles Formation, and Pt/C Electrocatalysts with Monodispersive Nanoparticles for Oxygen Reduction

Nanoparticle synthesis assisted by machine learning

Designing Structurally Ordered Pt/Sn Nanoparticles in Ionic Liquids and their Enhanced Catalytic Performance

Continuous flow synthesis of N,O-dimethyl-N'-nitroisourea monitored by inline FTIR: comparing machine learning and kinetic modeling for optimization

An outbreak of infectious hepatitis in Siliguri, 1966.

Microfluidic synthesis of PLGA nanoparticles enabled by an ultrasonic microreactor

Real-time monitoring and control for high-efficiency autonomous laser fabrication of silicon nanoparticle colloids

The Value of Relationship and Communication Management in Fundraising: Comparing Donors' and Practitioners' Views of Stewardship