Delivery of high peak power light through hollow waveguide fibres for particle image velocimetry
J Parry,T J Stephens,J D Shephard,Y. Matsuura,Y. W. Shi,M. Haste,D. P. Towers,M. Miyagi,J.,D. C. Jones
2004-01-01
Abstract:The technique of particle image velocimetry (PIV) is widely applied to the measurement of high speed flows. In some applications, however, its use is restricted by the requirement for direct optical access. This is a particular problem for measurement of flows inside enclosed volumes, such as inside internal combustion engines, and although solutions exist, e.g. by using either customised transparent components or endoscopes, these are expensive to fabricate and/or inflexible. Conventional step-index optical fibres have been successfully demonstrated in such applications [Stephens et al., 2003], but their relatively low damage thresholds mean that in order to deliver the required energy and beam quality a bundle of fibres is required, with concomitant losses at the input to the fibre. In this paper we present an alternative solution which makes use of a low-loss hollow waveguide fibre, capable of delivering pulse energies of 10’s of mJ, with a beam quality suitable for small volume PIV measurements. The performance of such a fibre is demonstrated with example flow measurements inside an optically-accessed internal combustion engine. A hollow waveguide fibre is essentially a long capillary tube internally coated with a reflective surface, typically silver with a dielectric polymer coating [Matsuura et.al., 2002]. These waveguides, whilst performing similarly to conventional optical fibres, guide by fresnel reflection rather than total internal reflection (TIR) so are suitable, with the correct choice of coating, for a greater range of wavelengths than silica or glass fibre. They are also ideally suited to the transmission of high peak powers, particularly if filled with a gas of high ionisation potential; this increases the threshold for gas breakdown that can occur in the high optical field in the hollow core, resulting in damage to the fibre structure. Hollow core waveguides are available in a range of diameters, limited by the manufacturing process, from 0.3 to ~ 2mm. One problem with light delivered through large core fibres such as these is speckle interference, which arises from the multimode nature of the fibre. This can lead to problems for PIV, with particles potentially moving between dark and bright regions of the speckled light sheet, which can result in loss of data [Stephens et al., 2003]. In our paper, we will describe a novel technique to reduce the coherence of the laser beam and hence reduce the speckle visibility.