Abstract:Summary Due to high energy density and huge reserves, many trial projects worldwide have been conducted to exploit natural gas hydrates (NGH). However, most of them did not meet the commercialization requirements because of submarine hazards, low gas production and sand production. Therefore, it is important to investigate the NGH dissociation process. In this paper, a fully coupled multiphase, strongly nonlinear three-dimensional (3D) thermal–hydro–mechanical–chemical model (DEHydrate) is developed to consider the multiphysics behaviours including solid-liquid-gas multiphase flow, heat transfer, NGH phase transition and solid deformation during hydrate dissociation. The model is solved using a fully implicit finite element method. The gas-liquid flow and heat transfer are simulated by low-order elements while the solid deformation is calculated by high- or low-order elements. The behaviours of the multiphase seepage and geomechanics are fully coupled and the physical properties of the reservoir are updated iteratively based on changes in pressure, temperature and displacement. The DEHydrate simulator provides an effective tool to predict the evolution of reservoir mechanical behavior during hydrate dissociation, including transient pressure, temperature, displacement and stress in the reservoir, as well as multiphase saturation, hydrate dissociation rate/mass and gas production rate/mass. During the NGH dissociation, the initial stage exhibits a rapid dissociation rate of up to 206.23 kg/(d·m) for NGH layer with a length of 600m and a thickness of 22m, which subsequently decreases to 11.64 kg/(d·m). Only a small portion of the gas generated during NGH dissociation is collected at the wellbore (approximately 35.6% after 100 days), while the majority remains trapped in the reservoir. In addition, throughout NGH dissociation, the reservoir matrix continues to move toward the wellbore in the horizontal direction. While in the vertical direction, the reservoir matrix below the wellbore moves upwards, with decreasing displacement due to low-pressure diffusion, while the reservoir matrix above the wellbore moves downwards, with increasing displacement. The largest displacements occur near the wellbore during the early stage of NGH dissociation, while in the late stage, the largest displacements occur above the reservoir.

Gas Hydrate Dynamics with Parameter-Free Clathrate Phase Description: Validation for Hydrate Formation and Dissociation

Formation Kinetics and Morphology Characteristics of Fracture-Filling Natural Gas Hydrate under the Influence of Multiple Parameters

A State-Dependent Constitutive Model for Gas Hydrate-Bearing Sediment Incorporating Phase Change

Experimental investigation and modelling of the hydrate formation kinetics based on hydrate pore-scale distribution in porous media

A review of clathrate hydrate nucleation, growth and decomposition studied using molecular dynamics simulation

Insights into the Mechanical Stability of Tetrahydrofuran Hydrates from Experimental, Machine Learning, and Molecular Dynamics Perspectives

Synergistic Elastic and Electrical Modeling for Quantitative Analysis of Gas Hydrate Formation Evolution in Pores

Thermodynamic modelling of gas hydrate dissociation conditions in porous medium in the presence of NaCl/methanol aqueous solution

Accurate prediction of clathrate hydrate phase equilibria below 300 K from a simple model

Intrinsic correlation between the generalized phase equilibrium condition and mechanical behaviors in hydrate-bearing sediments

On the Necessity of Including the Dissociation Kinetics When Modelling Gas Hydrate Pipeline Plug Dissociation

Non-isothermal, multi-phase, multi-component flows through deformable methane hydrate reservoirs

A fully coupled thermal–hydro–mechanical–chemical model for simulating gas hydrate dissociation

Overview of CSMHyK: A transient hydrate formation model

A new approach to gas hydrate modelling

Modeling on the phase equilibrium of gas hydrate in electrolytes containing system

CO2-TBAB Semi-Clathrate Hydrate Dissociation Behaviour in Individual Capsules: A New Two-Stage Numerical Model and Parametric Study

Multi-scale Characterization of Shell Thickness and Effective Volume Fraction During Gas Hydrates Formation: A Kinetic Study

Why Should We Use Residual Thermodynamics for Calculation of Hydrate Phase Transitions?

Modeling and characterizing the thermal and kinetic behavior of methane hydrate dissociation in sandy porous media

A New Set of Gas-Structure-dependent Parameters to Improve Gas Hydrate Equilibrium Calculations and Structure Descriptions by Van Der Waals-Platteeuw Model