Kawasaki disease presenting as meningitis in a two months old infant.

O. Türel,A. Güzeltaş,Ç. Aydoğmuş,N. Hatipoğlu,Husem Hatipoglu,R. Şiraneci

DOI: https://doi.org/10.5152/akd.2011.091

2011-06-01

Abstract:

What problem does this paper attempt to address?

Cofe Phosphide Conversion to Heterojunction Metal Phosphide (cofep) Electrocatalysts for Water Splitting

Hai Yu,Yingying Ma,Yang Pan,Liwen Su,Xinyu Ning,Xinyi Shen,Jianguo Lv,Min Zhao,Congrong Wang,Cunyong Wang,Miao Zhang,Lei Yang,Jin Zhong

DOI: https://doi.org/10.1016/j.mseb.2024.117589

IF: 3.407

2024-01-01

Materials Science and Engineering B

Abstract:Many researchers have made efforts on designing and synthesizing catalytic active site as well as deciphering how exactly they catalyze the reaction to obtain electrocatalysts with superior water splitting activity. However, the development of high-performance dual-functional non-precious metal electrocatalysts for Hydrogen Evolution Reaction (HER) and Oxygen Evolution Reaction (OER) remains challenging. In this study, CoFe undergoes in one-step phosphorylation reaction converted to Fe2P, 2 P, CoP2 2 and Co2P, 2 P, abbreviated as heterojunction metal phosphide (CoFeP). The Co/Fe ratio can be flexibly adjusted by controlling the content of Co in the synthesis process, which results in CoFeP with different morphologies. Benefiting from the porous structure and higher catalytic active sites, the Co-0.0032-FeP presents a lower overpotential of 127 mV and 266 mV for HER and OER of 10 mA cm-- 2 in a KOH solution, respectively. In addition, the low Tafel Slope and stable current density of Co0.0032-FeP indicate fast kinetics and high stability in the HER.
Ti Doped Α-Fe2o3 Electrodes for Water Oxidation

Shuchi Zhang,Shufeng Zhang,Wenhua Leng,Donglei Wu

DOI: https://doi.org/10.1016/j.jallcom.2022.166975

IF: 6.2

2022-01-01

Journal of Alloys and Compounds

Abstract:Development of low-cost electrocatalysts is a challenging task and has been the focus in the field of advanced water oxidation in comparison to ruthenium and iridium oxide-based electrodes. The current research focused on Ti doped α-Fe2O3 electrodes for water oxidation. The water oxidation rate initially enhanced and then decreased as Ti doping levels increase. The enhanced activity can be ascribed to the increased surface area and charge transfer rate constant kct. The increase in kct results from a greater potential drop on the Helmholtz layer, which is mainly attributed to an increased surface state density. The decreased performance for the electrodes with high Ti levels is due to the formation of a TiO2-Fe2O3 mixture where TiO2 shows poor activity. Moreover, the mechanism of charge transfer is discussed. This study may provide an alternative hematite semiconductor anode for water dark oxidation, environmental pollution control, and may even be helpful for better understanding the photoelectrochemical oxidation of water under the weak light illumination and high bias potential.
Engineering Phosphorus-Doped LaFeO3-δ Perovskite Oxide As Robust Bifunctional Oxygen Electrocatalysts in Alkaline Solutions

Zhishan Li,Lin Lv,Jinsong Wang,Xiang Ao,Yunjun Ruan,Dace Zha,Guo Hong,Qihui Wu,Yucheng Lan,Chundong Wang,Jianjun Jiang,Meilin Liu

DOI: https://doi.org/10.1016/j.nanoen.2018.02.051

IF: 17.6

2018-01-01

Nano Energy

Abstract:The strong desire for a clean and secure energy future has stimulated great interest in searching for low-cost, highly efficient electrocatalysts for regenerative fuel cells and rechargeable metal-air batteries. Oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) play a paramount role in the operation of these devices, but are notoriously sluggish even with precious metals-based catalysts. Here we report our findings in the development of a bifunctional catalyst based on phosphorus-doped LaFeO3-delta for ORR and OER in alkaline solutions. The remarkable electrocatalytic performance is attributed to larger amount of O-2(2-)/O- species, trace amount of Fe4+ species, and optimized e(g) electron filling (approximate to 1), benefiting from the doping effect of phosphorus. Both the mass activity and the specific activity are nearly doubled after P-doping. Density functional theory calculations also confirm that the increase in valence state of Fe ions is due mainly to phosphorus doping. These results demonstrate that non-metal element doping is an effective approach to optimizing the electronic configuration, changing valence states of ions, and thus enhancing activities of perovskite electrocatalysts.
Preparation of Fe‐doped Transition Metal Phosphides using Ionic Liquid as Precursor for Efficient Oxygen Evolution Reaction

Yage Wang,Ming Wang,Tianhao Li

DOI: https://doi.org/10.1002/cctc.202300132

IF: 4.5

2023-04-01

ChemCatChem

Abstract:For electrocatalysts in water splitting, activity and stability is at high are pivotal current density. Thus, transition metal phosphides were prepared using ionic liquid as precursor on nickel foam, where Fe was doped and this catalyst was covered by carbon. This Fe‐CoNiP‐C/NF exhibits excellent OER activity, which only needs overpotentials of 355 and 424 mV to reach the current densities of 50 and 100 mA·cm‐2, respectively. Moreover, it obtains a good stability for more than 30 hours at 100 mA·cm‐2. Experimental results demonstrate part of this TMPs‐based catalyst is oxidized to metal oxyhydroxide species after phosphidation, which can significantly improve the activity for OER. Also, the low Fe doping and outer carbon enhance the OER activity and stability.

chemistry, physical
Integrated iron phosphides and cobalt oxide electrocatalyst for enhanced hydrogen and oxygen evolution reactions: A study on activity and stability factors

Asma A. Alothman,Jafar Hussain Shah,Mehar Un Nisa,Saikh Mohammad,Abdul Ghafoor Abid,Muhammad Usman,Muhammad Adnan

DOI: https://doi.org/10.1016/j.ijhydene.2024.05.449

IF: 7.2

2024-06-05

International Journal of Hydrogen Energy

Abstract:The development of long-lasting, cost-effective, and efficient electrocatalysts is critical for obtaining exceptionally productive electrocatalytic hydrogen evolution and oxygen evolution reactions via water splitting in industrial settings, particularly for the generation of renewable hydrogen (H 2 ). In this study, the homogeneous integrated electrode (FeP/Co 3 O 4 /CF) is successfully produced using a facile pre-oxidation process that turns porous foams made of cobalt into a separate cobalt supply. The resultant materials are characterized via different analytical techniques like X-ray diffraction analysis (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), elemental mapping and BET to confirm the structural, morphological, elemental and textural properties. This well-built integrated electrode is made of chemically connected FeP, Co 3 O 4 , and Co foam, making it an extremely active, long-lasting, and adaptable catalyst. The FeP/Co 3 O 4 /CF nanocomposite electrode has obtained 10, 500, and 1000 mAcm −2 current densities at overpotentials of 52, 148, and 356 mV respectively for hydrogen evolution reaction (HER) and 192, 278, and 336 mV, respectively for the oxygen evolution reaction (OER). The exceptional performance can be attributed to the creation of an in situ tightly bound heterojunction between FeP and Co 3 O 4 . As a result, the FeP/Co 3 O 4 /CF integrated electrode is a highly promising choice for widespread application in industrial water electrolysis. Its self-supporting construction, integrated design, incorporation of phosphides, capacity to manage large current densities, and remarkable performance even when subjected to high-temperature electrolysis conditions are notable features.

energy & fuels,electrochemistry,chemistry, physical
DFT-assisted rational design of CoMxP/CC (M = Fe, Mn, and Ni) as efficient electrocatalyst for wide pH range hydrogen evolution and oxygen evolution

Xiangrui Zhang,Chunyan Sun,Shusheng Xu,Mengru Huang,Yi Wen,Xue-Rong Shi

DOI: https://doi.org/10.1007/s12274-022-4771-y

IF: 9.9

2022-08-11

Nano Research

Abstract:Rational design of highly active transition-metal phosphides for electrocatalyzing overall water splitting in a wide pH range assisted by first-principle calculations can efficiently save the developing cost and hence is quite attractive. Under the guidance of density-functional theory (DFT) calculations that the introduction of dopants (Fe, Mn, and Ni) into CoP could promote the hydrogen evolution reaction (HER) performances, a series of binder-free CoM x P/carbon cloth (CC; M = Fe, Mn, and Ni; x = 0, 0.05, 0.2, 0.5, and 1) were fabricated. Both experimental measurements and DFT calculations confirm the electronic modulation of dopants. DFT calculations further reveal that the modulated electronic structure promotes the electronic conductivity, favors the adsorption of key species, and consequently promotes the electrochemical performances. As predicted, the bimetallic phosphides demonstrate excellent HER performances in alkaline, acidic, and alkaline simulated seawater solutions and also deliver excellent oxygen evolution reaction (OER) performances, overwhelming the commercial RuO 2 . Benefiting from the modulated electronic structure and the hierarchical structure with massive CoFe 0.05 P zero-dimensional (0D) quantum dots anchored on two-dimensional (2D) N-doped porous carbon, CoFe 0.05 P delivered the best HER in four kinds of electrolytes ( η 10 of 73 mV in an alkaline simulated seawater solution) and OER in two kinds of electrolytes ( η 10 of 264 mV in an alkaline solution) with excellent stability of 45 h in the alkaline solution. The assembled CoFe 0.05 P/CC//CoFe 0.05 P/CC with the electrodes folded by 180° can still maintain a low cell potential of 1.62 V at 10 mA·cm −2 . This work proves the feasibility of the reported rational design strategy of developing efficient electrocatalysts for overall water splitting in a wide pH range.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
A Universal Strategy for Carbon-Supported Transition Metal Phosphides As High-Performance Bifunctional Electrocatalysts Towards Efficient Overall Water Splitting.

Qiaoling Kang,Mengyuan Li,Jiangwei Shi,Qingyi Lu,Feng Gao

DOI: https://doi.org/10.1021/acsami.0c00795

IF: 9.5

2020-01-01

ACS Applied Materials & Interfaces

Abstract:Exploring cost-effective and general approaches for highly active and stable bifunctional transition metal phosphide (TMP) electrocatalysts towards overall water splitting is greatly desirable and challenging. Herein, a general strategy combining sol-gel and a carbonization-assisted route was proposed to facilely fabricate a series of TMP nanoparticles, including CoP, MoP, FeP, Cu2P, Ni2P, PtP2, FeNiP, CoNiP, and FeCoNiP, coupled in an amorphous carbon matrix with one-step carbon composite formation. The resultant NiFeP@C exhibits excellent activities as a bifunctional electrocatalyst toward oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) with low overpotentials of 260 and 160 mV, respectively, at 10 mA/cm2 in 1 M KOH solution. With the NiFeP@C electrocatalyst as both electrode materials, an integrated electrolyzer can deliver 47.0 mA/cm2 of current density at 1.60 V, better than the assembled Pt/C20∥IrO2 counterpart. The encapsulation of NiFeP nanoparticles in the carbon matrix effectively prevents their corrosion and leads to almost unfading catalytic activities for more than 20 h for either the HER, OER, or overall water splitting, outperforming recently reported bifunctional electrocatalysts. The coexistence of Ni, Fe, P, and C would have synergetic effects to accelerate charge transfer and promote electrocatalytic activity. This universal strategy for TMP-based composites opens up a new avenue to explore TMPs as multifunctional materials for various applications.
Electrocatalytic Properties of Ti/Pt–IrO2 Anode for Oxygen Evolution in PEM Water Electrolysis

Feng Ye,Jianling Li,Xindong Wang,Tongtao Wang,Shanmei Li,Haojie Wei,Qingfeng Li,Erik Christensen

DOI: https://doi.org/10.1016/j.ijhydene.2010.01.094

IF: 7.2

2010-01-01

International Journal of Hydrogen Energy

Abstract:A novel Pt–IrO2 electrocatalyst was prepared using the dip-coating/calcinations method on titanium substrates. Titanium electrodes coated with oxides were investigated for oxygen evolution. Experimental results showed that Ti/Pt–IrO2 electrode containing 30 mol% Pt in the coating exhibited significantly higher electrocatalytic activity for oxygen evolution compared to Ti/IrO2 prepared by the same method, which is also supported by the electrochemical impedance data. Stability tests demonstrated Pt–IrO2 electrocatalyst had a service cycle of 10,000 times in 0.1 M H2SO4 solution. And the anode surface had hardly discovered cracks and had compact structures, which contributed to stable nature of the electrode together with good conductivity and specific interaction between Pt and IrO2 formed during the calcination. Furthermore, the enhanced catalytic activity for O2 evolution at Ti/Pt–IrO2 electrode is preliminarily discussed using the Mott–Schottky analysis.
Fe3O4-CoPx Nanoflowers Vertically Grown on TiN Nanoarrays as Efficient and Stable Electrocatalysts for Overall Water Splitting

Bailing Guo,Jingwen Sun,Xuemin Hu,Yining Wang,Yuntong Sun,Rudan Hu,Lei Yu,Hongan Zhao,Junwu Zhu

DOI: https://doi.org/10.1021/acsanm.8b01579

IF: 6.14

2019-01-01

ACS Applied Nano Materials

Abstract:Development of efficient electrocatalysts for overall water splitting is an attractive and challenging task. Here, we present a simple one-step electrodeposition for the synthesis of ferroferric oxide (Fe3O4) decorated cobalt monophosphide (CoPx) nanoflowers formed on titanium nitride (TiN) nanoarrays. Accompanied with the TiN nanoarrays as a support, the synthesized Fe3O4-CoPx/TiN exhibits an excellent activity with an onset potential of SO mV as well as superior stability even after 100 h for hydrogen evolution reaction (HER). Besides, the Fe3O4-CoPx/TiN composite delivers a current density of 10 mA cm(-2) at a low overpotential of 331 mV for oxygen evolution reaction (OER), which outperforms the Ir-based noble-metal catalyst synergetic effects among each component and the reinforced structural stability. Specifically, the incorporation of Fe3O4 into phosphide promotes the electron donor-acceptor properties during the catalytic progress that leads to a significant activity enhancement. Simultaneously, the TiN nanoarrays not only offer multi-charge-transfer channels to facilitate the electronic procedure, but also help to anchor and uniform the Fe3O4-CoPx nanoflowers without aggregation, further enabling a dynamic stability of the composite. Therefore, this work highlights the favorable integration of Fe3O4, CoPx, and TiN, which provides a way for constructing the hybrid structure for high-performance water splitting.
Ultrathin carbon layer-coated mesoporous core-shell-type FeP/Fe2O3/C for the hydrogen evolution reaction

Alaaldin Adam,María Isabel Díez-García,Joan R. Morante,Muhammad Ali,Zijin Chen,Ziqi Tian,Mohammad Qamar

DOI: https://doi.org/10.1039/d4ta02746a

IF: 11.9

2024-10-09

Journal of Materials Chemistry A

Abstract:Because of low cost and high abundance, iron-based electrocatalysts are deemed as a potential substitute of platinum for the hydrogen evolution reaction (HER). Herein, mesoporous core-shell-type iron phosphide/iron oxide (FeP/Fe3O4) coated with few ultrathin carbon layers is synthesized and evaluated for the HER. The FeP/Fe3O4 was obtained through the partial phosphidation of Fe3O4 mesoporous microspheres. Findings suggest that even partial phosphidation activates the surface of Fe3O4 for the HER, and FeP/Fe3O4 outperforms pure FeP. Although FeP/Fe3O4 has higher electrochemical impedance and charge transfer resistance compared to FeP, the FeP/Fe3O4 electrode exhibits superior performance in both acidic and basic electrolytes. In acidic solution, the η10 values for FeP/Fe3O4/C and FeP/C are approximately 90 and 135 mVRHE, respectively, while in basic medium, they are approximately 303 and 261 mVRHE. In addition, the specific activity of the FeP/Fe3O4, normalized to the electrochemically active surface area, is better than that of the FeP electrode. The superior performance of the FeP/Fe3O4 is correlated to its active centers and turnover frequency (TOF). The number of active sites in the FeP/Fe3O4 is 1.58 × 10−8 mol, while in the FeP it is 1.2 × 10−8 mol. At η = 90 mVRHE, the TOF of the FeP/Fe3O4 electrode is estimated to be 0.47 s−1, which is ~2 fold higher than that of FeP (0.47 s−1). Estimation of exchange current density (io) and Tafel slopes indicate a faster HER kinetics at the catalytic interface of the FeP/Fe3O4 (0.18 mA cm–2, 62 mV dec–1) than that of FeP (0.12 mA cm–2, 89 mV dec–1). In addition, the FeP/Fe3O4 electrode shows stable current density (20 mA cm–2) for 24 h of continuous operation. Two spin-polarized DFT models were used to obtain information on Gibbs free energy (ΔGH) and the corresponding adsorption energy (ΔEH). These models included a FeP surface with and without carbon layers, as well as a surface consisting of FeP and Fe3O4. In addition, the calculations provide insight into the stability of the phosphide surface, both with and without carbon layers.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Arrayed metal phosphide heterostructure by Fe doping for robust overall water splitting

Juanjuan Huo,Yang Ming,Xianglong Huang,Riyue Ge,Sean Li,Rongkun Zheng,Julie Cairney,Shi Xue Dou,Bin Fei,Wenxian Li

DOI: https://doi.org/10.1016/j.jcis.2024.09.083

IF: 9.9

2024-09-22

Journal of Colloid and Interface Science

Abstract:Transition metal phosphides (TMPs) show promise in water electrolysis due to their electronic structures, which activate hydrogen/oxygen reaction intermediates. However, TMPs face limitations in catalytic efficiency due to insufficient active sites, poor conductivity, and multiple intermediate steps in water electrolysis. Here, we synthesize a highly efficient bifunctional self-supported electrocatalyst, which consists of an N -doped carbon shell anchored on Fe-doped CoP/Co 2 P arrays on nickel foam (NC@Fe-Co x P/NF) using hydrothermal and phosphorization techniques. Experimental and theoretical results indicate that the modified morphology, with increased active site density and a tunable electronic structure induced by Fe doping in the CoP/Co 2 P heterostructure, leads to superior water electrolysis performance. The resulting NC@Fe 0.1 -CoP/Co 2 P/NF catalyst exhibits overpotentials of 122 mV for the hydrogen evolution reaction (HER) and 270 mV for the oxygen evolution reaction (OER) at 100 mA cm −2 . Furthermore, using NC@Fe 0.1 -CoP/Co 2 P/NF as both the cathode and anode in an alkaline electrolyzer enables the cell system to achieve 100 mA cm −2 at a voltage of 1.70 V, while maintaining long-term catalytic durability. This work may pave the way for designing self-supported, highly efficient electrocatalysts for practical water electrolysis applications.

chemistry, physical
Fe-doped CoFe–P phosphides nanosheets dispersed on nickel foam derived from Prussian blue analogues as efficient electrocatalysts for the oxygen evolution reaction

Lei Hao,Li-Hua Wang,Yong-He Zhang,Yu-Fan Qi,Huan-Huan Tang,Zhen-Qi Huang,Ke-Fen Yue,Dong-Sheng Li,Yao-Yu Wang

DOI: https://doi.org/10.1016/j.jssc.2022.123084

IF: 3.3

2022-07-01

Journal of Solid State Chemistry

Abstract:Exploration of a highly effective, durable non-precious metal-based catalyst in oxygen evolution reaction remains a major challenge in the process of developing and utilizing hydrogen energy by electrocatalytic splitting water (OER). This study developed a simple and efficient method to synthesize CoFe-PBA by directly growing the Prussian blue analogues (PBAs) precursor on a self-supporting electrode with a conductive substrate, which is further phosphorized into CoFe–P/NF electrocatalyst. The high conductivity and large surface area of NF could accelerate electron transmission and increase the number of active sites. Fe incorporation could also enhance electronic structure and optimize adsorbate energy. The obtained CoFe–P/NF exhibits excellent electrocatalytic performance for the OER in 1 M KOH, which only provides overpotentials of 264 and 278 mV at current densities of 100 and 200 mA cm−2, respectively, and exhibits excellent durability over 120 h. This method provides a feasible strategy for exploring high-efficiency oxygen evolution reaction catalysts.

chemistry, physical, inorganic & nuclear
Nickel phosphide nanoarrays decorated on amorphous NiPO x /Fe(OH) 3 : A stable core–shell electrocatalyst for efficient oxygen evolution at large current density

Xinding Lv,Yan Li,Fei Deng,Haotong Li,Shutong Wan,Xue Han,Wanqi Zhang,Xia Tao

DOI: https://doi.org/10.1016/j.cej.2023.146128

IF: 15.1

2023-09-20

Chemical Engineering Journal

Abstract:Severe reconstruction of transition-metal phosphides occurring in the oxygen evolution reaction (OER) process suffers from catalyst activity and long-term stability challenges. Herein, we develop a facile preoxidation tactic to fabricate an amorphous NiPO x /Fe(OH) 3 protective layer on the surface of NiP nanoarrays and investigate the effect of the NiPO x /Fe(OH) 3 layer thickness on electrocatalytic OER performance. We find the optimized NiP@NiPO x /Fe(OH) 3 electrode achieves a promising OER performance, with a low overpotential of 270.7 mV and an ultralong durability for 500 h at 500 mA cm −2 , predominantly originating from the synergy of the highly conductive NiP core and the NiPO x /Fe(OH) 3 layer. Post-OER characterizations demonstrate that the NiPO x /Fe(OH) 3 layer protects NiP from oxidation during the OER process and thus avoids the severe reconstruction of NiP adverse to the catalyst stability. This work opens an avenue for enhancing OER performance in water splitting via rational control of surface reconstruction of metal phosphides at the desired point.

engineering, chemical, environmental
Heterostructured CoFeP/CoP as an Electrocatalyst for Hydrogen Evolution in Alkaline Media

Lichao Tan,Ranran He,Anran Shi,Linjiang Xue,Yimin Wang,Hongpeng Li,Xiumei Song

DOI: https://doi.org/10.1021/acs.inorgchem.3c01186

IF: 4.6

2023-06-13

Inorganic Chemistry

Abstract:Developing highly efficient and persistent transition-metal-phosphide (TMP)-based electrocatalysts is critical for the hydrogen evolution reaction (HER) via water splitting in alkaline media. Herein, we constructed a unique heterostructured CoFeP/CoP grown on a nickle foam (NF) via hydrothermal and dipping methods followed by phosphorization at different temperatures for HER. The experimental results exhibit that the HER activity of CoFeP/CoP-400 is accelerated after the construction of...

chemistry, inorganic & nuclear
Rapid identification of mitochondrial DNA (mtDNA) mutations in neuromuscular disorders by using surveyor strategy.

S. Bannwarth,V. Procaccio,C. Rouzier,K. Fragaki,J. Poole,B. Chabrol,C. Desnuelle,J. Pouget,J. Azulay,S. Attarian,J. Pellissier,J. Gargus,J. Abdenur,T. Mozaffar,P. Calvas

DOI: https://doi.org/10.1016/J.MITO.2007.10.008

2008-03-01

Abstract:
Hollow CoP/FeP4 Heterostructural Nanorods Interwoven by CNT as a Highly Efficient Electrocatalyst for Oxygen Evolution Reactions

Yanfang Liu,Yong Li,Qi Wu,Zhe Su,Bin Wang,Yuanfu Chen,Shifeng Wang

DOI: https://doi.org/10.3390/nano11061450

IF: 5.3

2021-05-30

Nanomaterials

Abstract:Electrolysis of water to produce hydrogen is crucial for developing sustainable clean energy and protecting the environment. However, because of the multi-electron transfer in the oxygen evolution reaction (OER) process, the kinetics of the reaction is seriously hindered. To address this issue, we designed and synthesized hollow CoP/FeP4 heterostructural nanorods interwoven by carbon nanotubes (CoP/FeP4@CNT) via a hydrothermal reaction and a phosphorization process. The CoP/FeP4@CNT hybrid catalyst delivers prominent OER electrochemical performances: it displays a substantially smaller Tafel slope of 48.0 mV dec−1 and a lower overpotential of 301 mV at 10 mA cm−2, compared with an RuO2 commercial catalyst; it also shows good stability over 20 h. The outstanding OER property is mainly attributed to the synergistic coupling between its unique CNT-interwoven hollow nanorod structure and the CoP/FeP4 heterojunction, which can not only guarantee high conductivity and rich active sites, but also greatly facilitate the electron transfer, ion diffusion, and O2 gas release and significantly enhance its electrocatalytic activity. This work offers a facile method to develop transition metal-based phosphide heterostructure electrocatalysts with a unique hierarchical nanostructure for high performance water oxidation.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
One-pot hydrothermal synthesis of Pt-TiO 2 -Carbon as a highly active and stable electrocatalyst for Oxygen Reduction Reaction

Fikiru Temesgen Angerasa,Chia-Yu Chang,Endalkachew Asefa Moges,Wei-Hsiang Huang,Keseven Lakshmanan,Yosef Nikodimos,Jyh-Fu Lee,Nigus Gabbiye Habtu,Meng-Che Tsai,Wei-Nien Su,Bing Joe Hwang

DOI: https://doi.org/10.1016/j.mtener.2023.101312

IF: 9.257

2023-04-17

Materials Today Energy

Abstract:Energy conversion from chemical to electrical energy through electrochemical processes using fuel cells is a promising advanced technology to address global environmental issues. However, the development of cathode materials for proton exchange membrane fuel cells (PEMFCs) still faces challenges due to their practical requirements for activity and stability. Introducing oxides into the electrocatalysts is an important way to improve performance. Here, we propose a one-pot hydrothermal synthesis to load Pt and TiO 2 nanoparticles (NPs) onto the treated carbon (TC). Through the TiO 2 reconciliation between the Pt NPs and the carbon support, the tightly bound Pt-TiO 2 -TC electrocatalyst shows excellent activity and stability in the oxygen reduction reaction (ORR) due to the strong electronic interaction. At 0.9 V vs. reversible hydrogen electrode, the Pt-TiO 2 -TC electrocatalyst has about twice the specific activity (SA) and mass activity (MA) of commercial Pt/C. Moreover, the decline of Pt- SA and MA in Pt-TiO 2 -TC after the accelerated durability test (ADT) was 4.2% and 12.3%, respectively. Therefore, we strongly recommend hybrid metal-oxide-carbon materials with high conductivity, electronic interaction, and carbon corrosion resistance as support materials for Pt NPs to develop Pt-based electrocatalysts for fuel cell applications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Phosphorus Oxoanion-Intercalated Layered Double Hydroxides for High-Performance Oxygen Evolution

Ma Luo,Zhao Cai,Cheng Wang,Yongmin Bi,Li Qian,Yongchao Hao,Li,Yun Kuang,Yaping Li,Xiaodong Lei,Ziyang Huo,Wen Liu,Hailiang Wang,Xiaoming Sun,Xue Duan

DOI: https://doi.org/10.1007/s12274-017-1437-2

IF: 9.9

2017-01-01

Nano Research

Abstract:Rational design and controlled fabrication of efficient and cost-effective electrodes for the oxygen evolution reaction (OER) are critical for addressing the unprecedented energy crisis. Nickel–iron layered double hydroxides (NiFe-LDHs) with specific interlayer anions (i.e. phosphate, phosphite, and hypophosphite) were fabricated by a co-precipitation method and investigated as oxygen evolution electrocatalysts. Intercalation of the phosphorus oxoanion enhanced the OER activity in an alkaline solution; the optimal performance (i.e., a low onset potential of 215 mV, a small Tafel slope of 37.7 mV/dec, and stable electrochemical behavior) was achieved with the hypophosphite-intercalated NiFe-LDH catalyst, demonstrating dramatic enhancement over the traditional carbonate-intercalated NiFe-LDH in terms of activity and durability. This enhanced performance is attributed to the interaction between the intercalated phosphorous oxoanions and the edge-sharing MO6 (M = Ni, Fe) layers, which modifies the surface electronic structure of the Ni sites. This concept should be inspiring for the design of more effective LDH-based oxygen evolution electrocatalysts.
Atomic Manipulation to Create High-Valent Fe4+ for Efficient and Ultrastable Oxygen Evolution at Industrial-Level Current Density

Yong Feng,Huan Wang,Kun Feng,Chengyu Li,Shuo Li,Cheng Lu,Youyong Li,Ding Ma,Jun Zhong

DOI: https://doi.org/10.1021/acsnano.4c09259

IF: 17.1

2024-10-22

ACS Nano

Abstract:Manipulating the electronic structure of a catalyst at the atomic level is an effective but challenging way to improve the catalytic performance. Here, by stretching the Fe-O bond in FeOOH with an inserted Mo atom, a Fe-O-Mo unit can be created, which will induce the formation of high-valent Fe4+ during the alkaline oxygen evolution reaction (OER). The highly active Fe4+ state has been clearly revealed by in situ X-ray absorption spectroscopy, which can both enhance the oxidation capability and lead to an efficient and stable adsorbate evolution mechanism (AEM) pathway for the OER. As a result, the obtained Fe-Mo-Ni3S2 catalyst exhibits both superior OER activity and outstanding stability, which can achieve an industrial-level current density of 1 A cm-2 at a low overpotential of 259 mV (at 60 °C) and can stably work at the large current for more than 2000 h. Moreover, by coupling with commercial Pt/C, the Fe-Mo-Ni3S2∥Pt/C system can be used in the anion exchange membrane cell to acquire 1 A cm-2 for overall water splitting at 1.68 V (2.03 V for 4 A cm-2), outperforming the benchmark RuO2∥Pt/C system. The efficient, low-cost, and ultrastable OER catalyst enabled by manipulating the atomic structure may provide potential opportunities for future practical water splitting.
Nanoporous Carbon-Coated Bimetallic Phosphides for Efficient Electrochemical Water Splitting

Yu Liu,Qishun Wang,Lanlan Wu,Yan Long,Jian Li,Shuyan Song,Hongjie Zhang

DOI: https://doi.org/10.1021/acs.cgd.8b00117

IF: 4.01

2018-01-01

Crystal Growth & Design

Abstract:Developing highly efficient and low-cost electrocatalyst for water splitting to produce H-2 and O-2 as a sustainable energy fuel to replace noble metal catalyst is vital and urgent for the large-scale deployment of key energy technologies. Here, in combination of composition, structure, and catalytic mechanism analysis, the porous Co0.7Fe0.3P@C catalyst was synthesized by a facile phosphidation process of Co0.7Fe0.3@C which is derived from the corresponding Co-Fe coordination polymer precursors. The Co0.7Fe0.3P@C catalyst shows enhanced electrochemical activity toward oxygen evolution reaction and water splitting due to the incorporation of Fe element and the porous structure, comparable to the commercial noble metal catalyst. Furthermore, the coated carbon can not only promote electronic transmission but also protect the active Co0.7Fe0.3P nanoparticles, resulting in good activity and stability. These fascinating findings in this work would promote the designation and preparation of promising bimetallic oxygen evolution reaction electrocatalyst utilizing coordination polymers as precursors for various energy systems in the future.

Kawasaki disease presenting as meningitis in a two months old infant.

Cofe Phosphide Conversion to Heterojunction Metal Phosphide (cofep) Electrocatalysts for Water Splitting

Ti Doped Α-Fe2o3 Electrodes for Water Oxidation

Engineering Phosphorus-Doped LaFeO3-δ Perovskite Oxide As Robust Bifunctional Oxygen Electrocatalysts in Alkaline Solutions

Preparation of Fe‐doped Transition Metal Phosphides using Ionic Liquid as Precursor for Efficient Oxygen Evolution Reaction

Integrated iron phosphides and cobalt oxide electrocatalyst for enhanced hydrogen and oxygen evolution reactions: A study on activity and stability factors

DFT-assisted rational design of CoMxP/CC (M = Fe, Mn, and Ni) as efficient electrocatalyst for wide pH range hydrogen evolution and oxygen evolution

A Universal Strategy for Carbon-Supported Transition Metal Phosphides As High-Performance Bifunctional Electrocatalysts Towards Efficient Overall Water Splitting.

Electrocatalytic Properties of Ti/Pt–IrO2 Anode for Oxygen Evolution in PEM Water Electrolysis

Fe3O4-CoPx Nanoflowers Vertically Grown on TiN Nanoarrays as Efficient and Stable Electrocatalysts for Overall Water Splitting

Ultrathin carbon layer-coated mesoporous core-shell-type FeP/Fe2O3/C for the hydrogen evolution reaction

Arrayed metal phosphide heterostructure by Fe doping for robust overall water splitting

Fe-doped CoFe–P phosphides nanosheets dispersed on nickel foam derived from Prussian blue analogues as efficient electrocatalysts for the oxygen evolution reaction

Nickel phosphide nanoarrays decorated on amorphous NiPO x /Fe(OH) 3 : A stable core–shell electrocatalyst for efficient oxygen evolution at large current density

Heterostructured CoFeP/CoP as an Electrocatalyst for Hydrogen Evolution in Alkaline Media

Rapid identification of mitochondrial DNA (mtDNA) mutations in neuromuscular disorders by using surveyor strategy.

Hollow CoP/FeP4 Heterostructural Nanorods Interwoven by CNT as a Highly Efficient Electrocatalyst for Oxygen Evolution Reactions

One-pot hydrothermal synthesis of Pt-TiO 2 -Carbon as a highly active and stable electrocatalyst for Oxygen Reduction Reaction

Phosphorus Oxoanion-Intercalated Layered Double Hydroxides for High-Performance Oxygen Evolution

Atomic Manipulation to Create High-Valent Fe4+ for Efficient and Ultrastable Oxygen Evolution at Industrial-Level Current Density

Nanoporous Carbon-Coated Bimetallic Phosphides for Efficient Electrochemical Water Splitting