Molecular Mechanisms of Metabolic Arrest: Life in Limbo (Book Review)

B. Rees

2002-10-01

Abstract:Edited by K. B. Storey SEB Seminar Series. Oxford, UK: BIOS Scientific Publishers Ltd. (2001) 216 pp. ISBN 1 85996 2122 £75. ![Figure][1] A wide variety of organisms possess the capacity to reversibly reduce metabolism, either in response to adverse environmental

What problem does this paper attempt to address?

Effect of Terminal Modification on the Molecular Assembly and Mechanical Properties of Protein-Based Block Copolymers.

Matthew M. Jacobsen,Olena S. Tokareva,Davoud Ebrahimi,Wenwen Huang,Shengjie Ling,Nina Dinjaski,David Li,Marc Simon,Cristian Staii,Markus J. Buehler,David L. Kaplan,Joyce Y. Wong

DOI: https://doi.org/10.1002/mabi.201700095

2017-01-01

Abstract:Accurate prediction and validation of the assembly of bioinspired peptide sequences into fibers with defined mechanical characteristics would aid significantly in designing and creating materials with desired properties. This process may also be utilized to provide insight into how the molecular architecture of many natural protein fibers is assembled. In this work, computational modeling and experimentation are used in tandem to determine how peptide terminal modification affects a fiber-forming core domain. Modeling shows that increased terminal molecular weight and hydrophilicity improve peptide chain alignment under shearing conditions and promote consolidation of semicrystalline domains. Mechanical analysis shows acute improvements to strength and elasticity, but significantly reduced extensibility and overall toughness. These results highlight an important entropic function that terminal domains of fiber-forming peptides exhibit as chain alignment promoters, which ultimately has notable consequences on the mechanical behavior of the final fiber products.
Revisiting the conformational state of albumin conjugated to gold nanoclusters: A self-assembly pathway to giant superstructures unraveled

Michał Kluz,Hanna Nieznańska,Robert Dec,Igor Dzięcielewski,Bartosz Niżyński,Grzegorz Ścibisz,Wojciech Puławski,Grzegorz Staszczak,Ewelina Klein,Julita Smalc-Koziorowska,Wojciech Dzwolak

DOI: https://doi.org/10.1371/journal.pone.0218975

IF: 3.7

2019-06-27

PLoS ONE

Abstract:Bovine serum albumin (BSA) is often employed as a proteinaceous component for synthesis of luminescent protein-stabilized gold nanoclusters (AuNC): intriguing systems with many potential applications. Typically, the formation of BSA-AuNC conjugate occurs under strongly alkaline conditions. Due to the sheer complexity of intertwined chemical and structural transitions taking place upon BSA-AuNC formation, the state of albumin enveloping AuNCs remains poorly characterized. Here, we study the conformational properties of BSA bound to AuNCs using an array of biophysical tools including vibrational spectroscopy, circular dichroism, fluorescence spectroscopy and trypsin digestion. The alkaline conditions of BSA-AuNC self-assembly appear to be primary responsible for the profound irreversible disruption of tertiary contacts, partial unfolding of native α-helices, hydrolysis of disulfide bonds and the protein becoming vulnerable to trypsin digestion. Further unfolding of BSA-AuNC by guanidinium hydrochloride (GdnHCl) is fully reversible equally in terms of albumin's secondary structure and conjugate's luminescent properties. This suggests that binding to AuNCs traps the albumin molecule in a state that is both partly disordered and refractory to irreversible misfolding. Indeed, when BSA-AuNC is subjected to conditions favoring self-association of BSA into amyloid-like fibrils, the buildup of non-native β-sheet conformation is less pronounced than in a control experiment with unmodified BSA. Unexpectedly, BSA-AuNC reveals a tendency to self-assemble into giant twisted superstructures of micrometer lengths detectable with transmission electron microscopy (TEM), a property absent in unmodified BSA. The process is accompanied by ordering of bound AuNCs into elongated streaks and simultaneous decrease in fluorescence intensity. The newly discovered self-association pathway appears to be specifically accessible to protein molecules with a certain restriction on structural dynamics which in the case of BSA-AuNC arises from binding to metal nanoclusters. Our results have been discussed in the context of mechanisms of protein misfolding and applications of BSA-AuNC.
Bovine Serum Albumin Effect on Collapsing PNIPAM Chains in Aqueous Solutions: Spin Label and Spin Probe Study

Georgii A. Simenido,Ekaterina M. Zubanova,Evgenii A. Ksendzov,Sergei V. Kostjuk,Peter S. Timashev,Elena N. Golubeva

DOI: https://doi.org/10.3390/polym16101335

IF: 5

2024-05-10

Polymers

Abstract:The influence of bovine serum albumin (BSA) on collapsing poly(N-isopropylacrylamide) (PNIPAM) chains was studied with turbidimetry and spin probe and spin label electron paramagnetic resonance spectroscopy. An increased ratio of collapsed chains in aqueous solutions in the narrow temperature region near the LCST appeared in the presence of 2.5–10 wt% BSA. The spin probe EPR data indicate that the inner cavities of the BSA dimers are probably responsive to the capture of small hydrophobic or amphiphilic molecules, such as TEMPO nitroxyl radical. The observed features of the structure and dynamics of inhomogeneities of aqueous PNIPAM-BSA solutions, including their mutual influence on the behavior of the polymer and protein below the LCST, should be considered when developing and investigating PNIPAM-based drug delivery systems.

polymer science
Protein adsorption onto nanoparticles induces conformational changes: Particle size dependency, kinetics, and mechanisms

Peter Satzer,Frantisek Svec,Gerhard Sekot,Alois Jungbauer

DOI: https://doi.org/10.1002/elsc.201500059

2015-11-10

Engineering in Life Sciences

Abstract:The use of nanomaterials in bioapplications demands a detailed understanding of protein-nanoparticle interactions. Proteins can undergo conformational changes while adsorbing onto nanoparticles, but studies on the impact of particle size on conformational changes are scarce. We have shown that conformational changes happening upon adsorption of myoglobin and BSA are dependent on the size of the nanoparticle they are adsorbing to. Out of eight initially investigated model proteins, two (BSA and myoglobin) showed conformational changes, and in both cases this conformational change was dependent on the size of the nanoparticle. Nanoparticle sizes ranged from 30 to 1000 nm and, in contrast to previous studies, we attempted to use a continuous progression of sizes in the range found in live viruses, which is an interesting size of nanoparticles for the potential use as drug delivery vehicles. Conformational changes were only visible for particles of 200 nm and bigger. Using an optimized circular dichroism protocol allowed us to follow this conformational change with regard to the nanoparticle size and, thanks to the excellent temporal resolution also in time. We uncovered significant differences between the unfolding kinetics of myoglobin and BSA. In this study, we also evaluated the plausibility of commonly used explanations for the phenomenon of nanoparticle size-dependent conformational change. Currently proposed mechanisms are mostly based on studies done with relatively small particles, and fall short in explaining the behavior seen in our studies.
Bovine Serum Albumin-Poly(methyl Methacrylate) Nanoparticles: an Example of Frustrated Phase Separation.

Jun Ge,Jiandu Lei,Richard N. Zare

DOI: https://doi.org/10.1021/nl201303q

IF: 10.8

2011-01-01

Nano Letters

Abstract:A new protein-polymer conjugate made of denatured bovine serum albumin (BSA) covalently bonded to poly(methyl methacrylate) (PMMA) is synthesized by attaching PMMA to acryloylated BSA followed by nanoparticle precipitation. Depending on the BSA to PMMA ratio, these conjugates self-assemble into uniform spherical nanoparticles which show "island" growth on the surface of the nanoparticles. This growth is promoted or retarded by exposing the nanoparticles to different solvents, causing the two components to undergo incipient phase separation. Incipient phase separation of the BSA-PMMA conjugate two-component system was observed in single nanoparticles, resulting in "island" growth on the surface of the nanoparticles. Incipient phase separation of the BSA-PMMA conjugate two-component system was observed in single nanoparticles, resulting in "island" growth on the surface of the nanoparticles.
En Route to Stabilized Compact Conformations of Single-Chain Polymeric Nanoparticles in Complex Media

Stefan Wijker,Linlin Deng,Fabian Eisenreich,Ilja K. Voets,Anja R. A. Palmans

DOI: https://doi.org/10.1021/acs.macromol.2c00930

IF: 5.5

2022-08-01

Macromolecules

Abstract:Precise control over the folding pathways of polypeptides using a combination of noncovalent and covalent interactions has evolved into a wide range of functional proteins with a perfectly defined 3D conformation. Inspired hereby, we develop a series of amphiphilic copolymers designed to form compact, stable, and structured single-chain polymeric nanoparticles (SCPNs) of defined size, even in competitive conditions. The SCPNs are formed through a combination of noncovalent interactions...
Conformational Changes of the Protein Domains Upon Binding with Carbon Nanotubes Studied by Molecular Dynamics Simulations

Guanghong Zuo,Peng Xiu,Xin Zhou,Ruhong Zhou,Haiping Fang

DOI: https://doi.org/10.2174/1877946811202010012

2012-01-01

Current Physical Chemistry

Abstract:The interactions between the nanoscale particles, such as the carbon nanotubes, and biomolecules are essential to the nanoscale particle based biotechnology and biomedical applications, such as gene delivery, cellular imaging, tumor therapy. However, how the structure changes and whether the functions of the biomolecules are affected due to the existence of nanoscale particles are still poorly understood. In this paper, we review some of our recent progresses, which are based on the large scale molecular dynamics simulations, towards this direction. In our studies, by using an all-α domain named HP35 and an all-β domain named YJQ8WW as the examples, we show that the single-walled carbon nanotube (SWCNT), a typical form of hydrophobic nanoscale particle, can considerably change both the secondary and the tertiary structures of the proteins and form the protein-SWCNT complexes, in which the unfolded part of the proteins wrap around the SWCNT. The hydrophobic interaction and π-π stacking interaction between the nanoscale particles and the hydrophobic residues are found to play important roles in our observation. Keywords: Protein, Carbon nanotube, Molecular dynamics and Conformational change, coarse-grained, protein streptavidins, Saccharomyces cerevisiae., C-terminus, aromatic residue, spectroscopy, hydrophobic surface
Protein Binding Leads to Reduced Stability and Solvated Disorder in the Polystyrene Nanoparticle Corona

Radha P. Somarathne,Dhanush L. Amarasekara,Chathuri S. Kariyawasam,Harley A. Robertson,Railey Mayatt,Steven R. Gwaltney,Nicholas C. Fitzkee

DOI: https://doi.org/10.1002/smll.202305684

IF: 13.3

2024-01-22

Small

Abstract:Proteins experience destabilization when bound to polystyrene nanoparticle surfaces. This leads to highly solvated protein conformations separated by tethering regions, termed "adsorbotopes." Nanoparticle curvature influences the amount of protein disorder as well as the degree of protein destabilization. Identifying the tethering regions and intervening structure has implications for how living systems respond to therapeutic nanoparticles. Understanding the conformation of proteins in the nanoparticle corona has important implications in how organisms respond to nanoparticle‐based drugs. These proteins coat the nanoparticle surface, and their properties will influence the nanoparticle's interaction with cell targets and the immune system. While some coronas are thought to be disordered, two key unanswered questions are the degree of disorder and solvent accessibility. Here, a model is developed for protein corona disorder in polystyrene nanoparticles of varying size. For two different proteins, it is found that binding affinity decreases as nanoparticle size increases. The stoichiometry of binding, along with changes in the hydrodynamic size, supports a highly solvated, disordered protein corona anchored at a small number of attachment sites. The scaling of the stoichiometry versus nanoparticle size is consistent with disordered polymer dimensions. Moreover, it is found that proteins are destabilized less in the presence of larger nanoparticles, and hydrophobic exposure decreases at lower curvatures. The observations hold for proteins on flat polystyrene surfaces, which have the lowest hydrophobic exposure. The model provides an explanation for previous observations of increased amyloid fibrillation rates in the presence of larger nanoparticles, and it may rationalize how cell receptors can recognize protein disorder in therapeutic nanoparticles.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Investigation of the structure of protein–polymer conjugates in solution reveals the impact of protein deuteration and the size of the polymer on its thermal stability

Daniela Russo,Almerinda Di Venere,Frederik R. Wurm,Martine Moulin,Michael Härtlein,Christopher J. Garvey,José Teixeira

DOI: https://doi.org/10.1002/pro.5032

IF: 8

2024-05-29

Protein Science

Abstract:The conjugation of proteins with polymers offers immense biotechnological potential by creating novel macromolecules. This article presents experimental findings on the structural properties of maltose‐binding protein (MBP) conjugated with linear biodegradable polyphosphoester polymers with different molecular weights. We studied isotopic effects on both proteins and polymers. Circular dichroism and fluorescence spectroscopy and small‐angle neutron scattering reveal that the conjugation process destabilizes the protein, affecting the secondary more than the tertiary structure, even at room temperature, and that the presence of two domains in the MBP may contribute to its observed instability. Notably, unfolding temperatures differ between native MBP and the conjugates. In particular, this study sheds light on the complex interplay of factors such as the deuteration influencing protein stability and conformational changes in the conjugation processes. The perdeuteration influences the hydrogen bond network and hydrophobic interactions in the case of the MBP protein. The perdeuteration of the protein influences the hydrogen bond network and hydrophobic interactions. This is evident in the decreased thermal stability of deuterated MBP protein, in the conjugate, especially with high‐molecular‐mass polymers.

biochemistry & molecular biology
Revealing The Binding Structure Of The Protein Corona On Gold Nanorods Using Synchrotron Radiation-Based Techniques: Understanding The Reduced Damage In Cell Membranes

Liming Wang,Jingyuan Li,Jun Pan,Xiumei Jiang,Yinglu Ji,Yufeng Li,Ying Qu,Yuliang Zhao,Xiaochun Wu,Chunying Chen

DOI: https://doi.org/10.1021/ja406924v

IF: 15

2013-01-01

Journal of the American Chemical Society

Abstract:Regarding the importance of the biological effects of nanomaterials, there is still limited knowledge about the binding structure and stability of the protein corona on nanomaterials and the subsequent impacts. Here we designed a hard serum albumin protein corona (BSA) on CTAB-coated gold nanorods (AuNRs) and captured the structure of protein adsorption using synchrotron radiation X-ray absorption spectroscopy, microbeam X-ray fluorescent spectroscopy, and circular dichroism in combination with molecular dynamics simulations. The protein adsorption is attributed to at least 12 Au-S bonds and the stable corona reduced the cytotoxicity of CTAB/AuNRs. These combined strategies using physical, chemical, and biological approaches will improve our understanding of the protective effects of protein coronas against the toxicity of nanomaterials. These findings have shed light on a new strategy for studying interactions between proteins and nanomaterials, and this information will help further guide the rational design of nanomaterials for safe and effective biomedical applications.
Composition-Dependent Protein-Material Interaction of Poly(Methyl Methacrylate- co-styrene) Nanoparticle Series

Barbara Seifert,Stefan Baudis,Christian Wischke

DOI: https://doi.org/10.3390/ijms242216390

2023-11-16

Abstract:Polymer nanoparticles continue to be of high interest in life science applications. Still, adsorption processes occurring in protein-containing media and their implications for biological responses are not generally predictable. Here, the effect of nanoparticle composition on the adsorption of bovine serum albumin (BSA), fibronectin (FN) and immunoglobulin G (IgG) as structurally and functionally different model proteins was explored by systematically altering the composition of poly(methyl methacrylate-co-styrene) nanoparticles with sizes in a range of about 550 nm. As determined by protein depletion from the suspension medium via a colorimetric assay, BSA and IgG adsorbed at similar quantities, while FN reached larger masses of adsorbed protein (up to 0.4 ± 0.06 µg·cm-2 BSA, 0.42 ± 0.09 µg·cm-2 IgG, 0.72 ± 0.04 µg·cm-2 FN). A higher content of styrene as the more hydrophobic polymer component enhanced protein binding, which suggests a contribution of hydrophobic interactions despite the particles exhibiting strongly negatively charged surfaces with zeta potentials of -44 to -52 mV. The quantities of adsorbed proteins were estimated to correspond to a confluent surface coverage. Overall, this study illustrated how protein binding can be controlled by systematically varying the nanoparticle bulk composition and may serve as a basis for establishing interfaces with a targeted level of protein retention and/or presentation.
Merging non-covalent and covalent crosslinking: en route to single chain nanoparticles

Yifei Zhang,Yuncong Xue,Laiwei Gao,Rui Liao,Feng Wang,Fei Wang

DOI: https://doi.org/10.1016/j.cclet.2023.109217

IF: 9.1

2023-10-18

Chinese Chemical Letters

Abstract:Single-chain nanoparticles represent an emerging class of nanomaterials designed to mimic protein's folding paradigm. Intrachain covalent crosslinking toward the formation of single-chain nanoparticles encounters complex energy landscapes, leading to the potential occurrence of misfolding issues. While non-covalent crosslinking can circumvent this issue, the resulting single-chain nanoparticles exhibit lower structural stability compared to their covalently crosslinked counterparts. In this study, we present a novel approach for the synthesis of single-chain nanoparticles, achieved through the combination of non-covalent and covalent intramolecular crosslinking. Cyanostilbenes grafted onto the linear polymer form intrachain non-covalent stacks aided by hydrogen bonds, leading to the formation of non-covalently crosslinked single-chain nanoparticles. These nanoparticles undergo conversion to covalently crosslinked nanostructures through subsequent photo-irradiation using [2 + 2] photocycloaddition, a process facilitated by the supramolecular confinement effect. Consequently, the resulting single-chain nanoparticles demonstrate both intrachain folding efficiency and substantial stability, offering significant potential for advancing applications across diverse fields.

chemistry, multidisciplinary
Practice tips. Fine needle aspiration of breast lumps.

D. Delva,L. Tomalty,Patricia Payne

2002-06-01

Abstract:
Core-Shell Nanoparticles Fabricated By Tri-Capillary Coaxial Electrospray And Template Removal Method For Protein Delivery

Li-Hua Cao,Hong-Jun Wang,Ke-Hua Tu,Hong-Liang Jiang,Li-Qun Wang

DOI: https://doi.org/10.11777/j.issn1000-3304.2014.13479

2014-01-01

Acta Polymerica Sinica

Abstract:A coaxial tri-capillary electrospray and template removal method was proposed to produce nanosized core-shell particles for encapsulating of proteins. Polyethylene glycol (PEG) and poly (D, L-lactide-co-glycolide) (PLGA) were used as corona and shell materials, while Bovine serum albumin (BSA), as a model protein,was entrapped in the core. Microparticles with smooth surfaces and distinct core-shell-corona structures were obtained by coaxial tri-capillary electrospray and nanoparticles with diameter about 100 nm were achieved by removing the corona PEG template from core-shell-corona microparticles. Moreover, the nanoparticle size could be modulated by adjusting the feed rate of shell fluid, and the diameter of nanoparticles could be reduced to (68 +/- 8) nm when the shell fluid feed rate was decreased to 0.5 mL/h. The drug loading content and entrapment efficiency of BSA were 3. 7% and 78. 3%, respectively. It was also found that BSA released from nanoparticles in a typical bi-phased release profile and the process may last for 60 h. The second order structure of BSA released from particles was monitored with circular dichroism spectrum. The results showed that the electrospray process didn ' t affect the second order structure of proteins, implying that the denaturation of the protein didn ' t occur during the process of electrospraying encapsulation.
A Novel Thermal-driven Self-assembly Method to Prepare Albumin Nanoparticles: Formation Kinetics, Degradation Behavior and Formation Mechanism

Fang Li,Stacy Yeh,Qin Shi,Peng Wang,Hongyan Wu,Junbo Xin

DOI: https://doi.org/10.1208/s12249-022-02407-5

IF: 3.3

2022-09-08

AAPS PharmSciTech

Abstract:Nanoparticles based on bovine serum albumin (BSA), which shares 76% homology with human serum albumin (HSA), have emerged as a promising candidate for the efficient delivery of anticancer drugs. Thermal-driven self-assembly is a novel organic solvent-free approach to produce albumin nanoparticles. In our previous study, some features of this nanoparticle such as drug loading efficiency, drug encapsulation efficiency and drug release kinetics have been evaluated. However, the formation mechanism that determines the above nanoparticle properties remains unclear. Here, we investigated the formation kinetics and mechanism using spectroscopic methods including fluorescence spectroscopy, circular dichroism (CD) and differential scanning calorimetry (DSC). We also applied chemical analysis methods that measured the content changes of albumin active groups and vanillin. To verify the covalent networks in the nanoparticles, trypsin and glutathione (GSH) were used separately to cleave the peptide bonds and disulfide bridges, and dynamic light scattering (DLS) and sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE) were used to analyze the degraded samples. BSA nanoparticles started to form at 10 min and were completely formed at 120 min. With the digestion of trypsin, more than 50% of the nanoparticles were degraded within 60 min. CD spectra showed that α-helical structure of BSA decreased from 42.3% to 39.8% and 37.7% after heating for 10 and 60 min, respectively. In the DSC thermogram, the melting peak of BSA nanoparticles was 229.14°C, which is about 12°C higher than the physical mixture of BSA and vanillin, indicating that chemical reactions occurred during the nanoparticle formation and formed a new more stable substance. Moreover, the results of active group assay, GSH degradation and SDS-PAGE experiments also proved that disulfide bonds and peptide bonds were formed between BSA molecules, whereas Schiff bases were formed between BSA and vanillin molecules. Formation kinetics and degradation behavior are important properties to characterize albumin nanoparticles and should be paid attention to. Not only that, this study also provides an effective way to study the formation mechanism of protein-based nanodrug delivery systems.

pharmacology & pharmacy
Influence of Nanoparticle Size and Shape on Oligomer Formation of an Amyloidogenic Peptide

Edward P. O'Brien,John E. Straub,Bernard R. Brooks,D. Thirumalai

DOI: https://doi.org/10.48550/arXiv.1105.1102

2011-05-05

Soft Condensed Matter

Abstract:Understanding the influence of macromolecular crowding and nanoparticles on the formation of in-register $\beta$-sheets, the primary structural component of amyloid fibrils, is a first step towards describing \emph{in vivo} protein aggregation and interactions between synthetic materials and proteins. Using all atom molecular simulations in implicit solvent we illustrate the effects of nanoparticle size, shape, and volume fraction on oligomer formation of an amyloidogenic peptide from the transthyretin protein. Surprisingly, we find that inert spherical crowding particles destabilize in-register $\beta$-sheets formed by dimers while stabilizing $\beta$-sheets comprised of trimers and tetramers. As the radius of the nanoparticle increases crowding effects decrease, implying smaller crowding particles have the largest influence on the earliest amyloid species. We explain these results using a theory based on the depletion effect. Finally, we show that spherocylindrical crowders destabilize the ordered $\beta$-sheet dimer to a greater extent than spherical crowders, which underscores the influence of nanoparticle shape on protein aggregation.
Influence of protein nativity on the stability of bovine serum albumin coated microbubbles

Palash Dhara,Niyati Shah,Vidya Sundaram,Ashutosh Srivastava,Alexander A Solovev,Yongfeng Mei,Dmitry A Gorin,Krishna Kanti Dey

DOI: https://doi.org/10.1016/j.isci.2024.109286

IF: 5.8

2024-02-21

iScience

Abstract:Protein-coated microbubbles have become one of the emerging platforms in biomedical research as theranostic agents. In recent years, microbubbles have been extensively used as ultrasound contrast agents and carriers of molecular cargoes, pertaining to which several studies have focused on tuning the properties of these bubbles to achieve a higher degree of biocompatibility and extended stability. Synthesis of microbubbles has so far been traditionally carried out with pre-heated proteins like bovine serum albumin (BSA) as shell coatings, owing to the ease in making BSA crosslinked structures through disulfide bridge formation. We, however, have performed experiments to demonstrate that air core microbubbles formed with native BSA are more stable compared with those formed using denatured BSA. The experimental observations have been supported with analytical modeling and computational studies, which offer insights into the effect of BSA conformation in stabilizing the microbubbles shells and prolonging their lifetimes.
Metal-Organic Framework Induced Stabilization of Proteins in Polymeric Nanoparticles

Md Rakib Hasan Khan,Zoe Armstrong,Mary Lenertz,Briana Saenz,Narendra Kale,Qiaobin Li,Austin MacRae,Zhongyu Yang,Mohiuddin Quadir

DOI: https://doi.org/10.1021/acsami.3c16534

IF: 9.5

2024-03-18

ACS Applied Materials & Interfaces

Abstract:Developing protein confinement platforms is an attractive research area that not only promotes protein delivery but also can result in artificial environment mimicking of the cellular one, impacting both the controlled release of proteins and the fundamental protein biophysics. Polymeric nanoparticles (PNPs) are attractive platforms to confine proteins due to their superior biocompatibility, low cytotoxicity, and controllable release under external stimuli. However, loading proteins into PNPs...

materials science, multidisciplinary,nanoscience & nanotechnology
Inhibiting amyloid-like aggregation through bio-conjugation of proteins with polymer surfactant

Anasua Mukhopadhyay,Iliya D. Stoev,David A. King,Kamendra P. Sharma,Erika Eiser

DOI: https://doi.org/10.48550/arXiv.2005.13389

2020-05-27

Abstract:Prevention of protein aggregation and thus stabilization of proteins has large biological and biotechnological implications. Here, we show that inhibition of amyloid-like aggregates is possible in stoichiometric conjugates of polymer surfactant and bovine serum albumin (BSA) chosen as a model protein. We investigate using a combination of Thioflavin-T fluorescence spectroscopy, dynamic light scattering and FTIR spectroscopy the aggregation behavior in polymer surfactant modified and unmodified (native) BSA solutions. The BSA-polymer surfactant conjugates are stable up to 5 days under aggregation conditions, while native BSA forms amyloid fibrillar structures. Further, DLS-based micro-rheology studies performed with heat-treated 100 to 200 {\mu}M native BSA aggregates provided understanding of the equilibrium elastic and viscous moduli over a very large frequency range, reaching MHz, which are inaccessible using bulk rheology. Our results indicate that after 6 days of aggregation conditions, elastic moduli showed values between 1.2 to 3.6 Pa corresponding to an entanglement length ({\xi}) of 105 nm. Interestingly, heating 200 {\mu}M native BSA solution at 65 degree C for 2 days in a plastic Eppendorf resulted in self-standing films. These films exhibited strong ThT-fluorescence intensity and a predominant \b{eta}-sheet secondary structure from the FTIR studies, suggesting that self-standing microstructure resulted from hierarchical self-assembly of amyloid fibrils.

Biomolecules,Soft Condensed Matter,Biological Physics
Insights into Protein Unfolding under pH, Temperature, and Shear using Molecular Dynamics Simulations

Yinhao Jia,Clare Cocker,Janani Sampath

2024-08-21

Abstract:Protein biologics hold immense potential in therapeutic applications, but their ephemeral nature has hindered their widespread application. The effects of different stressors on protein folding have long been studied, but whether these stressors induce protein unfolding through different pathways remains unclear. In this work, we conduct all-atom molecular dynamics simulations to investigate the unfolding of bovine serum albumin (BSA) under three distinct external stressors: high temperature, acidic pH, and shear stress. Our findings reveal that each stressor induces unique unfolding patterns in BSA, indicating stressor-specific unfolding pathways. Detailed structural analysis showed that high temperature significantly disrupts the protein's secondary structure, while acidic pH causes notable alterations in the tertiary structure, leading to domain separation and an extended shape. Shear stress initially perturbs the tertiary structure, initiating structural rearrangements followed by a loss of secondary structure. These distinct unfolding behaviors suggest that different stabilization strategies are required to enhance protein stability under various denaturation conditions. Insights from these unfolding studies can inform the design of materials, especially polymers, aimed at improving protein stability.

Biological Physics,Soft Condensed Matter,Biomolecules

Molecular Mechanisms of Metabolic Arrest: Life in Limbo (Book Review)

Effect of Terminal Modification on the Molecular Assembly and Mechanical Properties of Protein-Based Block Copolymers.

Revisiting the conformational state of albumin conjugated to gold nanoclusters: A self-assembly pathway to giant superstructures unraveled

Bovine Serum Albumin Effect on Collapsing PNIPAM Chains in Aqueous Solutions: Spin Label and Spin Probe Study

Protein adsorption onto nanoparticles induces conformational changes: Particle size dependency, kinetics, and mechanisms

Bovine Serum Albumin-Poly(methyl Methacrylate) Nanoparticles: an Example of Frustrated Phase Separation.

En Route to Stabilized Compact Conformations of Single-Chain Polymeric Nanoparticles in Complex Media

Conformational Changes of the Protein Domains Upon Binding with Carbon Nanotubes Studied by Molecular Dynamics Simulations

Protein Binding Leads to Reduced Stability and Solvated Disorder in the Polystyrene Nanoparticle Corona

Investigation of the structure of protein–polymer conjugates in solution reveals the impact of protein deuteration and the size of the polymer on its thermal stability

Revealing The Binding Structure Of The Protein Corona On Gold Nanorods Using Synchrotron Radiation-Based Techniques: Understanding The Reduced Damage In Cell Membranes

Composition-Dependent Protein-Material Interaction of Poly(Methyl Methacrylate- co-styrene) Nanoparticle Series

Merging non-covalent and covalent crosslinking: en route to single chain nanoparticles

Practice tips. Fine needle aspiration of breast lumps.

Core-Shell Nanoparticles Fabricated By Tri-Capillary Coaxial Electrospray And Template Removal Method For Protein Delivery

A Novel Thermal-driven Self-assembly Method to Prepare Albumin Nanoparticles: Formation Kinetics, Degradation Behavior and Formation Mechanism

Influence of Nanoparticle Size and Shape on Oligomer Formation of an Amyloidogenic Peptide

Influence of protein nativity on the stability of bovine serum albumin coated microbubbles

Metal-Organic Framework Induced Stabilization of Proteins in Polymeric Nanoparticles

Inhibiting amyloid-like aggregation through bio-conjugation of proteins with polymer surfactant

Insights into Protein Unfolding under pH, Temperature, and Shear using Molecular Dynamics Simulations