Abstract:Liquid-phase deposition of exfoliated 2D nanosheets is the basis for emerging technologies that include writable electronic inks, molecular barriers, selective membranes, and protective coatings against fouling or corrosion. These nanosheet thin films have complex internal structures that are discontinuous assemblies of irregularly tiled micron-scale sheets held together by van der Waals (vdW) forces. On stiff substrates, nanosheet vdW films are stable to many common stresses, but can fail by internal delamination under shear stress associated with handling or abrasion. This "re-exfoliation" pathway is an intrinsic feature of stacked vdW films and can limit nanosheet-based technologies. Here we investigate the shear stability of graphene oxide and MoSe2 nanosheet vdW films through lap shear experiments on polymer-nanosheet-polymer laminates. These sandwich laminate structures fail in mixed cohesive and interfacial mode with critical shear forces from 40 - 140 kPa and fracture energies ranging from 0.2 - 6 J/m2. Surprisingly these energies are higher than delamination energies reported for smooth peeling of ordered stacks of continuous 2D sheets, which we propose is due to energy dissipation and chaotic crack motion during nanosheet film disassembly at the crack tip. Experiment results also show that film thickness plays a key role in determining critical shear force (maximum load before failure) and dissipated energy for different nanosheet vdW films. Using a mechanical model with an edge crack in the thin nanosheet film, we propose a shear-to-tensile failure mode transition to explain a maximum in critical shear force for graphene oxide films but not MoSe2 films. This transition reflects a weakening of the substrate confinement effect and increasing rotational deformation near the film edge as the film thickness increases. For graphene oxide, the critical shear force can be increased by electrostatic cross-linking achieved through interlayer incorporation of metal cations. These results have important implications for the stability of functional devices that employ 2D nanosheet coatings.

Shear annealing of a self-interacting sheet

Dynamics of a self-interacting sheet in shear flow

Interfacial Shear Effect On Herringbone Pattern Of Thin Films On Compliant Substrates

Fragmentation and structural transitions of few-layer graphene under high shear stress

Shear failure in supported two-dimensional nanosheet van der Waals thin films

Tailoring the mechanical properties of 2D materials and heterostructures

Anisotropy of two-dimensional materials under tension: a Molecular Dynamic study across graphene, hexagonal boron nitride and molybdenum disulphide

Variable-amplitude oscillatory shear response of amorphous materials

Yielding and microstructure in a 2D jammed material under shear deformation

Creep response of athermal amorphous solids under imposed shear stress

Shear Mediated Elongational Flow and Yielding in Soft Glassy Materials

Microphase Transitions of Block Copolymer/homopolymer under Shear Flow

Hydrodynamic interactions change the buckling threshold of parallel flexible sheets in shear flow

Mechanical Exfoliation of Two-Dimensional Materials

Thermally activated dynamics of annealed glasses near the yielding transition under cyclic shear

Kinetics of Shear-Induced Structural Ordering in Dense Colloids

The shear viscosity of interacting graphene

The building blocks behind the Electrohydrodynamics of non-polar 2Dinks

Tuning instability in suspended monolayer 2D materials

Yielding transition of a two dimensional glass former under athermal cyclic shear deformation

Activity-Induced Annealing leads to Ductile-to-Brittle Transition in Amorphous Solids