Abstract:With the goal of fostering the circular economy, the present work was devised to minimize and manage agricultural waste by transforming it into biochar; a versatile dye removal adsorbent. Waterways across the globe are frequently fouled and contaminated with organic materials, especially via unregulated industrial effluents, producing toxic water supplies. Rhodamine B (RhB) and Methylene blue (MB) dyes were used as model organic pollutants in water. The contaminants were then readily extracted from environmental samples using sustainable wheat straw derived biochars. These materials were utilized in an effort to link the circular economy directly to environmental protection, reducing organic contamination by using a low carbon solution. Herein, two methods were adopted to refine a low temperature carbonized material, dependent on initial pre-treatment; leaching followed by milling (method-I) and milling followed by leaching (method-II). Scanning Electron Microscopy (SEM), nitrogen physisorption, proximate and ultimate analysis and Attenuated Total Reflectance-Fourier Transform Infrared Spectroscopy (ATR-FTIR) were used to examine the properties of the synthesized materials. It was found that by altering the process of initial waste pre-treatment, an increase in available surface area (6.284 m 2 g −1 –20.754 m 2 g −1 ) and pore structure can be found post feedstock pyrolysis. Additionally, FTIR of the biochar post extraction supported the adsorption process of both dyes, demonstrating a change in dye-adsorbent bonding, depending on the initial waste pre-treatment for the biochar. In batch mode, several operating parameters including pH, concentration, duration, and dose were optimized. Kinetics and adsorption isotherm studies for biochar synthesized by method-II pre-treatment (BC-II) revealed that the system follows Pseudo-first-order kinetics and Freundlich adsorption isotherm model with the relative R 2 of 0.9989 and 0.9880 for RhB, comparing with 0.9933 and 0.9932 for MB. The optimal produced biochar, BC-II effectively removed 91.06% of RhB from solution at pH 4 and 92.43% for MB at pH 8. This study brings forth a solution to enhance waste management by creating a circular scenario and alleviate environmental contamination by utilizing wheat straw as a biochar adsorbent, produced under controlled and low temperature conditions.

KOH-treated tire pyrolyzed carbon as green and easily available adsorbent for Bisphenol A and Methylene blue adsorption

Photocatalyst-coated Carbon Microtube Electrodes: Preparation and Characterization of Their Properties and Photocatalytic Degradation of Methylene Blue.

Adsorption Characteristics of Bisphenol-A on Tailored Activated Carbon in Aqueous Solutions

Sorghum-Waste-Derived High-Surface Area KOH-Activated Porous Carbon for Highly Efficient Methylene Blue and Pb(II) Removal.

Carbonization of methylene blue adsorbed on palygorskite for activating peroxydisulfate to degrade bisphenol A: An electron transfer mechanism

Effective adsorbent for the removal of bisphenol A from water: MOF-derived carbon

Physicochemical characterization of a pomegranate peel-based new adsorbent generation used in bisphenol a elimination

Porous activated carbons derived from bamboo pulp black liquor for effective adsorption removal of tetracycline hydrochloride and malachite green from water

Green synthesis of reusable multifunctional γ-Fe2O3/bentonite modified by doped TiO2 hollow spherical nanocomposite for removal of BPA

Application of Activated Carbons Obtained from Polymer Waste for the Adsorption of Dyes from Aqueous Solutions

Removal of Bisphenol a (bpa) from Aqueous Solution by Potassium Carbonate Modified Wetland Plant Biochars

Coal-based catalytic carbon membrane functionalized with nitrogen-doped carbon nanospheres for efficient bisphenol A removal

A novel carbon-based material recycled from end-of-life tires (ELTs) for separation of organic dyes to understand kinetic and isotherm behavior

Carboxymethyl cellulose/activated carbon/hydroxyapatite composite adsorbent for remediation of methylene blue from water media

Efficient removal of tetrabromobisphenol A using microporous and mesoporous carbons: The role of pore structure

Potential Valorization of Waste Tires as Activated Carbon-Based Adsorbent for Organic Contaminants Removal

Adsorbent biochar derived from corn stalk core for highly efficient removal of bisphenol A

A novel nitrogen-containing covalent organic framework adsorbent for the efficient removal of bisphenol A from aqueous solution

Evaluating the pre-treatment protocol required to produce an effective carbonized waste adsorbent for organic pollution control

Activated carbon prepared by co-pyrolysis of waste tobacco straw and waste LDPE mulch film: characterization and application for methylene blue removal

Preparation of KOH and H3PO4 Modified Biochar and Its Application in Methylene Blue Removal from Aqueous Solution