Abstract:Three‐level hybrid surgery (HS) consisting of cervical disc arthroplasty (CDA) and anterior cervical discectomy and fusion (ACDF) has been partly used for the treatment of multi‐level cervical degenerative disc disease (CDDD). According to the different numbers and locations of CDAs and ACDFs, three‐level HS has several constructs. Few studies have concerned the von Mises stress on the prostheses, and no study had explored the von Mises stress on the vertebrae. However, the complications related to the implants and the collapsibility of the surgical vertebral bodies had been reported in multi‐level anterior cervical spine surgery. Thus, it is necessary to explore the biomechanical effects on the prostheses and vertebrae in three‐level HS. As a result, we found the stress on CDA prostheses in CDA‐ACDF‐CDA construct and the stress on ACDF prostheses in CDA‐ACDF‐CDA and ACDF‐CDA‐ACDF constructs were significantly increased. But the stress on vertebrae were lower compared with that in three‐level ACDF. Purpose Three‐level hybrid surgery (HS) consisting of cervical disc arthroplasty (CDA) and anterior cervical discectomy and fusion (ACDF) has been partly used for the treatment of multi‐level cervical degenerative disc disease (CDDD). The complications related to the implants and the collapse of the surgical vertebral bodies had been reported in multi‐level anterior cervical spine surgery. Thus, this study aimed to explore the biomechanical effects on the prostheses and vertebrae in three‐level HS. Methods A FE model of cervical spine (C0‐T1) was constructed. Five surgical models were developed. They were FAF model (ACDF‐CDA‐ACDF), AFA model (CDA‐ACDF‐CDA), FFF model (three‐level ACDF), SF model (single‐level ACDF), and SA model (single‐level CDA). A 75‐N follower load and 1.0‐N·m moment was applied to produce flexion, extension, lateral bending, and axial rotation. Results Compared with the intact model, the range of motion (ROM) of total cervical spine in FAF model decreased by 34.54%, 54.48%, 31.76%, and 27.14%, respectively, in flexion, extension, lateral bending, and axial rotation, which were lower than those in FFF model and higher than those in AFA model. The ROMs of CDA segments in FAF and AFA models were similar to the intact model and SA model. Compared with the intact model, the ROMs at C3/4 segment in FFF model increased from 5.71% to 7.85%, and increased from 5.31% to 6.81% at C7/T1 segment, following by FAF model, then the FAF model. The maximum interface pressures of the Prestige‐LP in FAF model were similar to SA model, however the corresponding values were increased in AFA model. The maximum interface pressures of the Zero‐P were increased in FAF and AFA model compared with those in SF and FFF models. The stress was mainly distributed on the screws. In AFA model, the maximum pressures of the ball and trough articulation in superior and inferior Prestige‐LP were all increased compared with those in SA and FAF model. In FFF model, the maximum pressures of the vertebrae were higher than those in other models. The stress was mainly distributed on the anterior area of the vertebral bodies. Conclusions HS seemed to be more suitable than ACDF for the surgical treatment of three‐level CDDD in consideration of the biomechanical effects, especially for the two‐level CDA and one‐level ACDF construct. But a more appropriate CDA prosthesis should be explored in the future.

Implant Design and Cervical Spinal Biomechanics and Neurorehabilitation: A Finite Element Investigation

Biomechanical properties of a novel cervical spine implant with elastic deformation: a cadaveric study

Mechanical properties of an elastically deformable cervical spine implant

Biomechanical evaluation of a novel individualized zero-profile cage for anterior cervical discectomy and fusion: a finite element analysis

Finite element model predicts the biomechanical performance of cervical disc replacement and fusion hybrid surgery with various geometry of ball-and-socket artificial disc

Biomechanical analysis of customized cage conforming to the endplate morphology in anterior cervical discectomy fusion: A finite element analysis

Biomechanical Analysis of Two-Level Novel Cage-Type Implant for Anterior Cervical Discectomy and Fusion: A Finite Element Analysis

Biomechanical Evaluation of Intervertebral Fusion Process After Anterior Cervical Discectomy and Fusion: A Finite Element Study

Biomechanical Comparison of Anterior Cervical Corpectomy Decompression and Fusion, Anterior Cervical Discectomy and Fusion, and Anterior Controllable Antedisplacement and Fusion in the Surgical Treatment of Multilevel Cervical Spondylotic Myelopathy: A Finite Element Analysis

Biomechanical evaluation of the novel assembled internal fixed system in C2–C3 anterior cervical discectomy and fusion: a finite element analysis

Finite element modeling to predict the influence of anatomic variation and implant placement on performance of biological intervertebral disc implants

Biomechanical analysis of a single-level Customized cage screw fixation for Anterior Cervical Discectomy and Fusion in the cervical spine: an in-silico study

Biomechanical Effects on the Prostheses and Vertebrae of Three‐Level Hybrid Surgery: A Finite Element Study

Biomechanical study of anterior transpedicular root screw intervertebral fusion system of lower cervical spine: a finite element analysis

Biomechanical Analysis of Cervical Artificial Disc Replacement Using Cervical Subtotal Discectomy Prosthesis

[Finite Element Analysis of Biomechanics of Cervical Spine after Dynamic Cervical Implant Surgery].

Biomechanical Effects of Anterior Decompression and Fusion With Cervical Two-Segments Different Internal Fixation Systems: A Finite Element Study

Biomechanical Comparison of Different Surgical Strategies for Skip-level Cervical Degenerative Disc Disease: A Finite Element Study

Investigation into Factors Affecting the Mechanical Behaviours of a Patient-Specific Vertebral Body Replacement.

Effects of New Cage Profiles on the Improvement in Biomechanical Performance of Multilevel Anterior Cervical Corpectomy and Fusion: A Finite Element Analysis

Biomechanical Comparison of Optimal Shapes for the Cervical Intervertebral Fusion Cage for C5-C6 Cervical Fusion Using the Anterior Cervical Plate and Cage (ACPC) Fixation System: A Finite Element Analysis.