Abstract:Background: Robotics is emerging as a promising tool for functional training of human movement. Much of the research in this area over the last decade has focused on upper extremity orthotic devices. Some recent commercial designs proposed for the lower extremity are powered and expensive - hence, these could have limited affordability by most clinics. In this paper, we present a novel un-motorized bilateral exoskeleton that can be used to assist in treadmill training of motor-impaired patients, such as with motor-incomplete spinal cord injury. The exoskeleton is designed such that the human leg will have a desirable swing motion, once it is strapped to the exoskeleton. Since this exoskeleton is un-motorized, it can potentially be produced cheaply and could reduce the physical demand on therapists during treadmill training. Results: A swing-assist bilateral exoskeleton was designed and fabricated at the University of Delaware having the following salient features: (i) The design uses torsional springs at the hip and the knee joints to assist the swing motion. The springs get charged by the treadmill during stance phase of the leg and provide propulsion forces to the leg during swing. (ii) The design of the exoskeleton uses simple dynamic models of sagittal plane walking, which are used to optimize the parameters of the springs so that the foot can clear the ground and have a desirable forward motion during walking. The bilateral exoskeleton was tested on a healthy subject during treadmill walking for a range of walking speeds between 1.0 mph and 4.0 mph. Joint encoders and interface force-torque sensors mounted on the exoskeleton were used to evaluate the effectiveness of the exoskeleton in terms of the hip and knee joint torques applied by the human during treadmill walking. Conclusion: We compared two different cases. In case 1, we estimated the torque applied by the human joints when walking with the device using the joint kinematic data and interface force-torque sensors. In case 2, we calculated the required torque to perform a similar gait only using the kinematic data collected from joint motion sensors. On analysis, we found that at 2.0 mph, the device was effective in reducing the maximum hip torque requirement and the knee joint torque during the beginning of the swing. These behaviors were retained as the treadmill speed was changed between 1-4 mph. These results were remarkable considering the simplicity of the dynamic model, model uncertainty, non-ideal spring behavior, and friction in the joints. We believe that the results can be further improved in the future. Nevertheless, this promises to provide a useful and effective methodology for design of un-motorized exoskeletons to assist and train swing of motor-impaired patients.

Design and Validation of a Pancake Style Planetary Gearbox for an Eddy Current-Based Wearable Gait Training Robot

A Novel Application of Eddy Current Braking for Functional Strength Training During Gait

Configurable, wearable sensing and vibrotactile feedback system for real-time postural balance and gait training: proof-of-concept

A wearable resistive robot facilitates locomotor adaptations during gait

Design and Backdrivability Modeling of a Portable High Torque Robotic Knee Prosthesis With Intrinsic Compliance For Agile Activities

Design of a Parallel Wrist Rehabilitation Robot and Analysis of Physiological Effect on Training

A Wearable Resistance Devices Motor Learning Effects in Exercise

Kinematic Performance of a Customizable Single Degree-of-Freedom Gait Trainer for Cost-Effective Therapy Aimed at Neuromuscular Impairments

Novel swing-assist un-motorized exoskeletons for gait training

Design and Development of a Planetary Gearbox for Electromechanical Actuator Test Bench through Additive Manufacturing

Design and Preliminary Validation of a Lower Limb Exoskeleton with Compact and Modular Actuation

A Novel Reconfigurable Gravity Balancer for Lower-Limb Rehabilitation With Switchable Hip/Knee-Only Exercise

A Wearable Upper Extremity Rehabilitation Device for Inducing Arm Swing in Gait Training

Design and Analysis of a Clutched Parallel Elastic Actuator

Design and Performance Evaluation of a Novel Wearable Parallel Mechanism for Ankle Rehabilitation

Design and Control of a Quasi-Direct Drive Soft Exoskeleton for Knee Injury Prevention during Squatting

Design, Development and Characterization of a Wrap Spring Clutch/Brake Mechanism As a Knee Joint for an Assistive Exoskeleton

Design Principles for Compact, Backdrivable Actuation in Partial-Assist Powered Knee Orthoses

A Novel Pantographic Exoskeleton Based Collocated Joint Design With Application for Early Stroke Rehabilitation

Development of a Knee Actuated Exoskeletal Gait Orthosis for Paraplegic Patients with Incomplete Spinal Cord Injury: A Single Case Study

Design and Implementation of the Lower Extremity Robotic Exoskeleton with Magnetorheological Actuators